Ortur Laser Master 3 Review | New 2022 Laser Engraver

Рет қаралды 9,594

Күн бұрын

Ortur Laser Master 3 is the upgraded laser engraver and laser cutter that is packing a lot of speed and power.
Laser Master 3 Link: s.zbanx.com/r/3xFp9hFZEQl7
Cheap Air Assist: amzn.to/3OFRmD7
Patreon Support: / jjshankles
Support me on KZfaq: / @jjshankles
The older Ortur Laser Master 2 Pro tops every list as the recommended entry level laser engraver, and they set out to make the Laser Master 3 a more high end variant. They for sure delivered the high end quality of chassis, and big boi 10 Watt laser. It isn't a perfect machine though, so I cover the cons that I would have liked them to do differently. If those downsides don't apply to you then this might be the right laser engraver/cutter for you.
The gear I use:
3D Printer: amzn.to/3mpSBeZ
Polymaker Filaments: us.polymaker.com/products/pol...
Main Camera: amzn.to/2RNpEbV
Nifty 50 Lens: amzn.to/2Ls60ky
Sharpest Wide Lens: amzn.to/2XOj1v8
Telephoto Nikon Beast: amzn.to/2xqSUvz
Favorite Not RODE Mic: amzn.to/2C4W0se
Perfectly Smooth Gimbal: amzn.to/2MXBCgr
Camera Strap: amzn.to/2rvGtMd
Atomos Ninja V Recorder: amzn.to/2FL03LO
Affordable Studio Light: amzn.to/2rzdAic
Drone: amzn.to/2EgitUT
Great Camera Bag: amzn.to/2UykJg1
Chapters:
Intro - 00:00
Specs - 00:25
Safety - 02:54
Testing - 04:56
Wifi and App Control - 07:45
Cons - 08:45
Conclusion - 12:22
#laserengraver #orturlasermaster3 #diy

Пікірлер: 9

@JJShankles 2 жыл бұрын

Laser Master 3 Link: s.zbanx.com/r/3xFp9hFZEQl7 Coupon code: LM3ZB100 Final price: $599

@temeculayardgames Жыл бұрын

You have to put the SD card that came with in to clear the error. It’s so strange and took me an hour to figure because it’s in the back of the manual.

@johnathankeller1948 Жыл бұрын

Thank you!

@anonymous-wx5xu Жыл бұрын

Can I just buy one of your laser engraver?

@mateuszabramek7015 2 жыл бұрын

Cool

@byronengler6185 Жыл бұрын

Not a well built frame, only one screw per rail. Mine came in with damaged parts and box was okay. Not as well built as the older Pro 2. Save your money for a better laser.

@WayneCook306 Жыл бұрын

Crappy review way way too much chat and nowhere near enough do.

@joelrggizmo1373 Жыл бұрын

'm currently running 2 lasers New Ortur Laser Pro 2 New Ortur Laser Master 3 Please explain the update procedure on opening the ben file from a Mac I don't use windows only else I absolutely have no choice. Ortur I sent me a Ben file and I'm not sure if I can open it from my Mac. But if I do so on the windows machine and I have to do the procedure that they're talking about I use lightburn I do not use laser gerbil. This is the sellers instructions that I was received but I don't have a windows computer on the system I'm running out now I'm using my Mac mini. A PC would take too much space in the area that I'm working with. Let me assume you are on RC1, but you can confirm this by typing $i in your console in lightburn If on RC1 the steps are as follows, download the zip file i sent, extract to a folder in desktop Once done, turn the machine off Then PRESS and hold the small reset button on the back and count to 3 -> Press and hold power for 3 more seconds, then release reset ORTURLASER should pop up on the devices as a drive. Copy ONLy the bin file into it (ESP_OLM3_205_RC21_20220730.bin) Machine will think for a min and auto power off Once done, turn key to the RIGHT (right is on) then power on machine again Connect to lightburn and $RST=* in console to reset all defaults if I do this part here I'm assuming that I have to do it from the same computer that I'm using the machine with. Let me know if this works please

@JJShankles Жыл бұрын

So it looks like you don't have to open the file, you just need to upload it to the laser. You just need to unzip that file to get the BIN file out. Then connect your mac to the laser and upload it to the file that appears. I think it should work the same on either mac or pc.