Was raised in Swan River and this reminds me to only return in Sept now. LOL You and your family enjoy that new wood stove and have a Merry Christmas sitting in front of it.

The same person must have lived in my house too, good bones and lots of "custom" additions that I wish weren't there... it's fun doing any project

Get me back in the house ! I’m freezing to death! Best of luck to ya buddy! 👍👍👍👍🇺🇸🇺🇸🇺🇸🇺🇸🙏🙏🙏🙏

Man and cameras never do blowing snow any justice. Stay safe 🤟

You and Wood Wizzle can have that weather. I had to put a coat on watching 🥶

Well my guy, here I have been studying stoves for 3 days and here comes tinman and provides

Wow! That woodstowe will do you god Tinman. Will be cosy for x-mas.

Love how projects have their little nuggets of "oh my house could have burned down" reminds me of someone wiring up my 30 amp range with 15 amp rated wire. Looked like burnt marshmallows when I ripped it out!!! Stay warm, I am building a fire right now.

Cannot wait to see her up and running! You are a jack of all trades. Great to have all those skills in life sure helps and saves you lots of money!

Love aluminum tape😁😁😁👍🏽👍🏽👍🏽👍🏽

I love your chainsaws a lot you make them powerful than anybody else

Thank you Tinman for bringing us along on the wood stove renovation. And wow she was a blowing crazy out on the prairie. Love it. 🌲❤🌲✊🪓

Started Saturday afternoon noon here. We just got back from the bush, cut just under 2 cords. Got out of the bush and the wind picked just like that. Stay warm Tinman...Mahalo🤙🤙

As I’m listening to this I’m giving parts of a 024 a bath. Absolutely needed it, never seen one this bad. Great video sir 👍

Very nice!! Thatll keep ya warm. Dang that was bad roads. Hate drivin in that stuff. STAY SAFE!!

Did the same thing a few years ago installing a wood stove insert. Not wanting to mess with the old chimney, I put a insulated stainless flex liner up to the chimney cap and it burns super clean. The new stove is so good it would get the house way too hot. I now keep some low btu soft maple and doug fir on hand and use the wood I need depending on outside temp.

At least I know where the cold weather in Indiana came from. Sheesh....

you got way lucky on that. I was a firefighter for 15 years and saw tons of these fires.

Great stuff Tinman 👍🏻

Nice job Tinman! It's gonna be nice when it's done!

You got me craking up. I love an adventure.

Looks like it’s going to be a great source of heat, nothing like wood stove

Looking good Tinman. 👍🌳🪓🔥

Wood/water/ towing weasel earning it's pay in the snow! Stay warm

Great video love seeing the stove go in. That trip in the snow was crazy, the camera usually sees much better then you can so that visibility was terrible. Thanks again and more please

Gotta love delays. That's a beauty of a stove ya got there!!

Tinmaaaaan, thanks for sharing brother.. I was born on the Prairie in Sask and my kin all homesteaded there. Hardy people who built our country survived many winters on the windy Prairie.. Good on ya for changing it up with the content, Canadian culture at its finest brother.. SLANT'E

Nice job Tinman! I remember those days when the snow blows sideways!😳

Nice!

Congratulations on 20.1k subscribers Tinman. Excellent video as always.

Good job buddy i knew ud do a good job on it. Have a good week.

we call it the real feel.

The old turbo weisel working good buddy

Thank you!!!

I love my zero clearance, plenty of heat without sacrificing space.

mate you need to come over here its not as cold lol

It doesn't matter how hard you try to seal your house, if you have negative pressure from your furnace, cold air is getting sucked in. good call.

That is a beautiful sunset I laysay if you want something done right do it yourself.

Very very nice tinman

Good job buddy! Your tougher than I am, I’d have to have gloves on for sure….and maybe even hand warmers, LoL

You have a good Gail wind there we've just had a bit ourselves here in syr, ny, I'm a retired union mason and did alot of side work mostly on masonry chimneys and metal pipe ones as well looks like you have what they used to call a zero clearance fireplace luv the content of this vid tinman 👍👍 keep up the good stuff great job by the way

Nice to have a good dependable 4 wheel drive out there

Had one of those "oh crap" moments this past spring. Bought this house in January 2019 and working diligently to make it ours. Between military obligations, work, and the Master's program I'm in, it's been slow, but it's coming along. Was removing the gas starter hardware from the fireplace, cutting and capping a few inches after the on/off valve. When I got into the wall, I noticed a metric ass ton of duct tape on one of the pipes leading from the 500 gallon LP tank. Long story short, the idiots that lived here before had the same idea of removing the gas starter, except they cut into the main pipe and "sealed" it with duct tape. I understand, if you can't duct it, fu.... forget it. But come on, these people had far too much trust in dollar store quack tape.

Man I dunno if I’d tell winter to bring it on we both know what kind of wrath a Manitoba winter can bring.

It's cold in Wisconsin but it looks pretty grim where you are! Good luck on your inspection. I'll be having a cataract removed that day 👍

hello tinman congrats on 20,000 subs! hope you and the family are well.

yeah i don't miss that super cold wind or those nasty cold nights in the prarries. Because british columbia gets cold enough for me lmao thanks.

This video made me cold, get your wood stove going & keep warm. 20K Subs Nice!

Glad you are doing it and not me🤣🤣🤣. Just kidding buddy. If I was close I would help you all I could. Be safe and try to stay warm.

Nice install tinman congrats on 20000

I didn’t know Canadians used the imperial system. I assumed they all used metric and was shocked to hear tinman discuss the required distance for the chimney in “feet”. I’m American you’ll have to excuse my ignorance on what system the rest of the world uses lol

Not sure how it is in Canada but here in Pennsylvania with fireplace inserts you have to use a double walled stainless steal flued pipe

Bad time of year to be doing this! 😨

Hi tinman, here in Australia we not allowed to install a chimney our self because the insurance company won't pay out if the place is burt down 👇

I would love to hear what you think of the fireplace after using it for a winter. I have the same unit and sometimes it seems to not deliver enough heat.

Tinmans secret weapon... tin tape😁nice job there friend. Are you checking out Dan’s 266 build on his channel... Kains Kustom Garage? It’s his first build and he is getting right into er. Splitting the cases n all! He’s a good guy and I hope to see ya commenting 👍

Take care of the personal stuff we can wait on chainsaw vids!

I've put a staieles steel plate before installing it heater so if anything falls out from the fire pit it's caught m mi

Great work on the stove! Do you folks not have basements?

Brrrrrrr!

Is that a Dishy??! I ordered Starlink in Feb. of 21, and they're still saying April of 22 before I get it. We live out in the boons, no internet unless I put up a 75-80 foot tower. Starlink is gonna be awesome, I hope anyway. Nice work on the new fireplace. Any reason you went with another fireplace vs a wood stove??

Does the water freeze while hauling it enough to have problems getting it back out

Tinman don’t you have a well sr. And did you half to pay for the water?

Do you have rough in picture’s how you install ?

Winterpeg

Is the pump house used due to how deep the ground ice is up north? I’ve never seen someone go get water like that. Strange but neat.

Hey tinman I had a suggestion pop up for a neotech bar and chain and you can get a 36" bar for $90 and I was wondering if you could review it to see if it's worth anything

👋

I sent you some pictures of my 272xp purchase. I would like to hear your comment on it.

Could have put a Drolet HT2000 there.......

That's a zero clearance unit. Any reason you put the durock(?) around the stove?

what kind of internet do you have Tinman? Looks like a cool unit!!

I need to meet fat willy. Good name. My nickname is lumpy so I can relate