Our new Jianye KM-25A Lathe is here!

Рет қаралды 4,052

Жыл бұрын

It's here and running, this will allow us to make parts faster and we will be able to make complex shapes, harder to make manually. It will provide more options when designing parts for our stop motion animation puppets and rigs.
Please SUBSCRIBE ► / edupuertasfruns
Jianye KM-25A CNC lathe; www.jianyetech.cn
Syil X5 CNC milling machine; www.syil.com
FOLLOW ME
Become a Patron ► / edupuertasfruns
Instagram ► / edupuertasfruns
Twitter ► / edupuertasfruns
My Animation Armatures ► www.kineticarmatures.com
Animation Studio ► www.citoplasmas.com
MY CAMERA GEAR (Amazon affiliate links)
CAMERA, Canon EOS 80D ; geni.us/GdVo
CAMERA, Canon R6; geni.us/Esjtr
WIDE LENS, Canon 10-22 mm; geni.us/gk25
NICE ZOOM, Canon EF 24-105mm; geni.us/YWJZ
MACRO LENS Canon 60mm; geni.us/Znz5j
NIKON TO CANON ADAPTOR; geni.us/tuBF
NIKON NIKKOR 28mm AIs; geni.us/dGECR
NIKON NIKKOR 55mm AI; geni.us/7fdO
ZEISS CP2 50mm; geni.us/AA2NG
MICROPHONE, Rode VideoMic; geni.us/qf33P
WIRELESS MICROPHONE, Rode; geni.us/4dlSf
SD CARD, SanDisk Extreme PRO 64GB; geni.us/U09Xb
DJI OSMO ACTION; geni.us/zDfvsu
TRIPOD, Manfrotto MKBFRA4-BH BeFree; geni.us/MGII6
MAGIC ARM, Manfrotto 244 Magic Arm; geni.us/E8DBG
SUPER CLAMP, Manfrotto 035; geni.us/E8DBG
GEARED HEAD, Manfrotto 410; geni.us/P7KQJeB
SMALL LED LIGHT; geni.us/e4yj
APUTURE LS C120D II; geni.us/BWRufND
USB LONG CABLE, Tether orange: geni.us/bGNmYB
SOFTWARE, Dragonframe: geni.us/ZSra56
MUSIC:
www.epidemicsound.com/referra...
#stopmotion #diy #edupuertas

Пікірлер: 44

@edupuertasfruns Жыл бұрын

Would you like to know more about how to operate this machine? Let me know?

@chrischarlesanimations Жыл бұрын

Yes!!

@owenridgway8049 Жыл бұрын

Im wondering if some of the buttons that you couldn't figure out are for editing gcode manually In the machine? you might just have to press buttons and see what it does.

@owenridgway8049 Жыл бұрын

Also if your learning gcode it might be worth it to learn Marcos I l have to find it but I saw a video once where someone made a macro that could cut threads and all they had to do was change 1 or 2 variables and they could make a completely different size thread and pitch

Жыл бұрын

Me inspira ver gente con tanto entusiasmo, que contagia, muestran sus logros producto de tanta entrega y pasión por su quehacer; me fascina, reciban un caluroso saludo desde México. Felicidades Edu y equipo

@edupuertasfruns Жыл бұрын

Gracias!! de entusiasmo no nos falta, jaja. Un abrazo!

@wednesdaythursday Жыл бұрын

Thanks from george , your E mail information was a great start for me , have fun with your new machine :)

@edupuertasfruns Жыл бұрын

Thanks so so much!!!! It wasn’t necessary, I am happy to help whenever I can

@ouilogique Жыл бұрын

Great, it's really amazing !

@retrotechjournal Жыл бұрын

Awesome. I love seeing your shop grow!

@josefhiebler7380 Жыл бұрын

Nice video

@rbrtdff Жыл бұрын

Wow! This looks fantastic, congrats!

@edupuertasfruns Жыл бұрын

Thank you! Cheers!

@TheSurferboy2 Жыл бұрын

Congratulations on your new machine!

@edupuertasfruns Жыл бұрын

Thank you!

@PlanetaMaqueta Жыл бұрын

Felicitaciones Edu!!! Impresionante maquina!

@edupuertasfruns Жыл бұрын

Gracias

@terrymation Жыл бұрын

Oh wow, all the effort it took to get that in there, ha. Have so much fun with the new toy :D

@edupuertasfruns Жыл бұрын

Hey, it was hard but now it will be a party. At the end we didnt do the podcast, next month we will start building stuff for the feature film!! Its exciting! Once it is started it would be great to share the experience.

@terrymation Жыл бұрын

@@edupuertasfruns I would absolutely love to hear all about it!!!!

@MauzyrockRC Жыл бұрын

Awesome!

@edupuertasfruns Жыл бұрын

Thanks!

@billbaggins9961 Жыл бұрын

Nice addition to your shop or should I say Factory, now that you are in rapid production. Big accomplishments and congratulations.

@edupuertasfruns Жыл бұрын

Thanks 👍 it is a nice shop, proud of it but the production will not achieve high volume any time soon, jaja

@TERRYRUFF Жыл бұрын

最高のマシーンですね素晴らしい❗️そして羨ましい😊

@felipollodecali Жыл бұрын

Felicitaciones edu!!! yo ahorrando pa´ comprarte la primera armadura o alguna cosita. Saludos desde Colombia.

@edupuertasfruns Жыл бұрын

Gracias!! Claro, es la forma, guardar poco a poco hasta conseguirlo

@EdgePrecision Жыл бұрын

New machine day always exciting! Why don't you just turn the ball on the end instead of silver soldering on the ball?

@edupuertasfruns Жыл бұрын

I’ve been turning the balls in the factory for many years and still do for all my products. I will try it in here soon, want to see what I get. For general use it is fine, for professional animators using ball and socket joints in a puppet, you feel it when the ball has 0,01mm diferences in diameter in the middle of the ball or in the edges when it meets the neck of the rod. The ball no longer slides centered. The tolerances they can get with better lathes than this one in the factory can’t beat a ball bearing precision roundness. Seems crazy, still blows my mind that numbers, as the first balls I sold were made with a form tool in a manual lathe and they were potatoes. Now that would be unacceptable for me. The option I am studing now is using press rollers after turning the balls in the factory to avoid the microimperfections. What do you think?

@EdgePrecision Жыл бұрын

@@edupuertasfruns I'm not sure what you are referring to by Press Rollers? Could you be referring to roller burnishing? That could work if the material was soft enough. Are the balls hardened? As far as turning them on the lathe. It is a little bit tricky to turn a prefect Sphere. But I think with that machine and the proper program and tooling you should be able to do it. One other thing. You mentioned using Fusion to program for your mill. You can do turning programs in Fusion as well. You would just need a post for your lathe. Something to check into maybe. It looks like your machine has a C axis is that a full rotary axis or does it just position at certain angles?

@edupuertasfruns Жыл бұрын

@edge precision I refer to something similar to roller burnishing but out of the lathe, and a roller with the shape and dimension of the ball presses the ball. It is a custom made roller. The part during machinning is not hardened, it is 303 stainless. The machining quality control in the factory has computers that mesures variations on the sphere, I go there to check it, they use swiss lathes and some times the subspindle gives us less precise balls, don't know why, and bigger diameter of the ball near the neck. They say the tolerance I ask is impossible to keep, plus minus 0.01mm in the sphere is complicated. I tried Fusion for the lathe, there is no postprocesor for syntech lathe. Will try to contact them. Now seems more work to edit a generic postprocesor than write the code.

@EdgePrecision Жыл бұрын

@@edupuertasfruns I have a Idea for you. If the Spherical form is more important then the actual diameter. This is what you can do. You could rough it out with turning tools to say .050 mm of finished size. Then in your sub spindle on your lathe setup a fly cutter (Or this could be a small boring head) at an angle such that it will finish cut on the outside of the sphere to centerline at the tip and to the shanks diameter behind the sphere. With the turning spindle running and the sub spindle with this fly cutter running feed into the roughed sphere to the finished diameter. I'm putting this link to a video kzfaq.info/get/bejne/nKufotF0sbqnknk.html . This video by Robin Renzetti showing him lapping a precision sphere. Now I'm not suggesting you do this. But look at what he is using to lap with. It is basically a hole saw. So if you can set a boring head or fly cutter up to cut the diameter of your sphere and tip it at the angle so the tool just clears the shank but cuts to center at the front. With either the C axis rotating the turning spindle or the spindle just on. This will cut a prefect Sphere the diameter the tool is set for. Does that make sense? You could do this on your lathe. This will be the most precise way you could cut it. Better then your screw machine shop can. But the fly cutter has to set up on centerline and at the proper angle.

@edupuertasfruns Жыл бұрын

@edge precision That video is really impresive, and it makes a lot of sense, now the thing is to try to setup that boring head in a precise and rigid place. I will keep thinking on it and see if I can make it work in my machine. Thanks for your ideas!

@stevenrodriguez3891 Жыл бұрын

😎👍

@vs6703 Жыл бұрын

@magiclay 2 ай бұрын

Qhats the price of this machine?

@dav1dsm1th Жыл бұрын

If you don't already, I'd recommend subscribing Edge Precision - I think you'll pick up many, many tips on how to fly a CNC lathe (and mill). His stuff is at a different scale - but the gcode is the same - it just has bigger numbers 🙂 Stay safe out there.

@edupuertasfruns Жыл бұрын

Thanks. I’ve been following him for long time now. He masters his Mazak. All seems easy watching, hard trying, jaja

@dav1dsm1th Жыл бұрын

@@edupuertasfruns I thought you might be - he's probably the best resource for explaining how to CNC on the planet.

@edupuertasfruns Жыл бұрын

I like him and This old tony and John Grismo and NY CNC, Internet is awesome!