Your outfeed table looks good to me. I"m 76yrs old now, stopped woodworking about 3 yrs ago after about 40plus years. Now I watch youtube videos about woodworking. I"m so glad to see all the young people like you and others doing woodworking. It such a rewarding pastime.

So even your non-art projects look like art! Congrats on the new machine. I love mine!

That turned out awesome! It's beautifully designed, even if it was on the fly!!!

Love the side molding great touch!

It is always a pleasure watching and learning from you. Thank you for your insight and guidance.

Awesome design, this is exactly what I need to do with my new SawStop. I particularly want an outfeed table without legs (my garage floor is very uneven so the fewer legs to level the better. Great to know that the flex on that inside corner isn't too severe - at least good enough for outfeed support. I love it!

One of the best videos I have seen. Well done, and edited. Thanks Michael. Classy and pro work.

Looks great, I love how you cleaned up the raw cast iron edge.

Well done Michael. Thanks for sharing

That looks sweet! You just proved that functionally and aesthetically pleasing don’t have to be mutually exclusive. Great job!

Wow! Good idea! Realy have a pleasure watching how you are working)

Hi Michael~! I just now found your channel and am an instant fan. I think that this idea for an outfeed is just what I need on my SawStop. Looking forward to more from you~! Thanks~!!

Nice out-feed table! You can stiffen up that free corner by adding a tall rib on the under side. Make it even sturdier by tying the rib into the 2x4 mounting rail that you put on the long edge of your table.

Great build I'm looking to purchase a Saw Stop in the near future and will definitely consider this addition

Awesome build! Makes the saw look 10 times better besides being functional.

Good job Mike looks very nice.

Cracking job mate looks great.

Looks real nice!

Looks good Michael.

Enjoy that new saw and nice job on that outfeed table!

Nice saw! I'm sure you'll have a blast using it in future projects!

Dang, might be the nicest looking outfeed table I have seen. I'm sure you already know by now, but you are going to love that saw!

Great job nice saw thanks for sharing

Older video, but this is the out-feed table build that I needed and couldn't find. Simple, effective and looks like it should be there!

Very nice, thanks for sharing.

Great job my friend

Awesome stuff!

Michael very nice outfit table, plenty of details.

Awesome job!

NICE JOB! It's inspired me. I just bought a new similar size saw. Thanks for the video.

I’ve been saving for a new table saw , and there are a few I like better that the saw stop but I just can’t get over the safety aspect of the SS. So hopefully in the near future I will have one sitting in my shop. Congrats on the new machine man ,I’m sure it will be night and day difference from the old one.

we're grabbing a Pro tomorrow, thanks for the idea for the outfield table. I like how you tie into the frame eliminating the support legs. \,,/

Looks great.

nice look to it. giving me some ideas. thanks.

Nice Job!

Always such great looking finish on all of your projects! Wish you lived close .... I’d sign up for classes. ☺️🤗

nice build, got a TS injury 10 days ago got very lucky the saw was off long story short got 5 stitches no damage other than my ego. I will be getting a ST TS soon and will be buying your plans. Thanks for the vid.

Great design!! This is something I need to do

Just found your channel searching for a project. You got a new sub! I have watched several of your videos now and have enjoyed the projects and the videography each very much.

Awesome work!

Nice work dude.

Just found your channel. Liked the video I watched. Keep up the good work.

Agh! I want this! I bought that saw a few months ago.

Great job

I am newly subscribed and I love your work (especially the art). You also make a great choice of music to accompany what you are doing. I always catch myself head bobbing in time with the music😊.

Nice looking structure...I think it looks very professional... oh and welcome to the sawstop family ;)

*UPDATE* Plans now available on my website: www.almfab.com/plans

Awesome!

I've been watching a lot of woodworking videos lately, but this is the first time I stumbled on one of your videos. Nice work! Not a big fan of the background music, so I muted it. Hopping I didn't miss your commenting. Been thinking about getting one of them Sawstop table saw. If I can afford it!

Nice job! Can't wait for the video where you finally make the puppets from your to-do list.

Very nice.

That looks awesome. Also love the edit. My first thought as well was that far right corner’s stability, just for really heavy material, but you could always just cut a piece of scrap wood to wedge under there on the fly if need be. Nice work!

very good, thanks

Nice looking edging/design : - )

Good stuff

I like it, nice job! I have the SS Contractor TS and plan on using your design make an Out-feed Table.

Looks like a freakin' factory accessory. Beautiful job.

thanks for sharing. You seem to have a nice shop with a lot of great organisation ideas you should make a shop tour video.

Really NICE!!! new subscriber.

Very cool out feed table my Sawstop contractor saw (52") is currently still the boxes they came in 😟. Have 2 more days of work before I can put it together

Genial... Saludos desde Chile...

I started by watching your 3 legged stool video and I do wish you would go back and add narration to all your videos. You have some very cool ideas and I'd I'd purchased the plans if I could follow along to your plans with video while following the plans to build.

Nice

Hell yeah !

Hi, Michael. Is your Sawstop 36" or 52"? And I'm curious about your use, on this and other projects, of 1/4" melamine taped to plywood rather than going with 3/4" melamine. Is this a matter of achieving better rigidity, or is it just cheaper to go this route? Love your videos!

Will use this one on my Laguna Fusion 3 table saw! Thanks, if the build ends up on youtube I will also link your video if it's ok?

Excellent video quality and ingenuity on the build. Do you think if you went all the way across and and put a runner/brace on the right side of the saw it would completely preclude need for legs?

Super trop top, à plus JEAN.

After having this for a year, do you wish that you had made the outfeed table so that it could fold down? I love the simplicity, just curious if you find yourself tight in space with it fixed in place.

Looks great. You did an amazing job. Looks like it's part of it. Lol

Is there anything on the saw that prevents extending the out-feed table to the full width of the saw table? I'm short on space and this has me thinking it could double as a light-duty workbench. Thanks!

Nice. You make it look too easy.

Hello Michael, I really enjoy your channel, and I really enjoy this build. I Purchased the plans from you, but had to make a few modifications due to the does collection blade guard system that came with myself Sawstop. I took some pictures of it but I didn’t know how to send them to you. My question is in regards to the plan and the 2 x 4 that you use, I’m curious why you did not cut it long enough to go all the way out to the left side of of the saw, up against the left piece of oak. It appears there is a gap there. Is that by design, and if so what was it for? Thanks again. Tim

Looks good, dude! Now what are these puppets I see a note about?

Nice table Michael. I'm getting ready to build an outfeed table for my PM table saw. The plans call for phenolic plywood which is proving nearly impossible to find. What is the black panel you used in your outfeed table? Does it have a plywood core or is it some sort of fiber board? Thanks for your video, time and inspiration. I think I'll "wrap" my table now that I've seen yours. Cheers.

Hello I gave you a a Thumbs up. That said I can’t believe you drove those side mount bolts in with a Wood Mallet...? And you Chocked up on the handle like you were a novice user... Any way I am Jealous of your New Saw... I am a Happy for you... Greg

Great job. But am I missing something, can't seem to figure out how you would swing the fence over to where jointed the out feed table?

Stylish

I am following when you’re a lead with building something based on your design for my saw stuff. Can you tell me how you want to about cutting the slots in the top of the thing for an extension to the Sawstop. I’m concerned about what size router bits you used and any other helpful information you may have. Thanks.

What kind of tape did you use to attached the melamine to the substrate? Carpet tape?

Nice job. It that the 3hp Sawstop?

Nice job. I bought a SS recently and stumbled on your channel while trying to plan an outfeed table. Any reason why you didn't use the table you already made for that function? You mention on the video that you built it with the height of the saw in mind. I was figuring on making an assembly/outfeed table all-in-one. I did some research on casters were you can adjust the height pretty easily. In my small shop mobility is a necessity and real estate is tight.

niiiice

Nice video Michael. Please tell me what is the black surface you used, I guess its melamine or laminex? And where do you get it?

Awesome idea and great execution, what kind of material did you use for the black part of the outfeed table

Hi Michael, very nice. I'm a newbie here, just bought a Sawstop contractor saw with the 36T-glide table/fence. Not my first table saw, I've had a cheap jobsite saw since the 90's - I've been an avid DIYer most of my life - but I'm not an accomplished carpenter. But I'm working on raising my game a little, hence the new saw to go with my new basement finishing project. So first of all, I'm totally jealous about the 3HP cabinet model you have. Nevertheless, my question mainly concerns dimensions. My shop space is pretty confined so I don't have an adjacent table to catch material on the outfeed. (1) What are the dimensions of this table you've made? (2) What would be your recommended dimensions for an outfeed table that had to be a "one and only?" And much thanks.

Hi...just wondering why is the outfeed table narrower than your table saw? Great build btw!

Ok, it taken me 8 months to get started on this project but the game is on! However, here are a few comments that ai have figured out that have slowed me down. 1.The first question I had involved the use of Double Sided Tape, why not Contact Cement Glue. Answer is the 1/4 Black Melamine has Melamine on both sides. Also, I didn't think that Double Sided Tape would provide 100% adhesion around the sides as well as the Router Cuts. Additionally, the Tapes Glue could get on a Saw's Blade or Router Bit, not good. 2. After researching the availability of Black Melamine, I found it at a supplier in town for $36.00, 4X8 Sheet, it has a MDF core. 3. Their 3/4 inch thick Black Melamine is Fiberboard and is one sided. I opted for the 1/4 because it is lighter, therefore easier to work with even though I have to glue it down to either plywood/MDF. 4. Titebond has a product that is made to glue Melamine to either MDF/Plywood, It called Titebond Melamine and is around $25,00/Gal or $5.00 for 6oz.

What made you decide to not make it the same width as the table + extension wing?

Great job - black contiboard edged with what looked like oak? looks real nice. (Nice job also with the music, takes me back when I was a 1970's porn star!! - I wish :-)

Looks awesome, so good to have an outfeed table so you don't have to worry about stuff falling off the back side. This is not a criticism, because I would have done the same exact thing and then after thought "oh, you know what i could have done?". So maybe it will help the next person... At around :50 you cut down your material and then at around 2:00 you built up a surface to nail the guides into and prevent chip out when you cut the miter slots. If you had the left the table oversized initially you could have nailed the guides directly to it and just routed it and then cut it down to size and the nail holes and any chip out on the edges would be cut off. Seriously though, I enjoyed the video and the end product looks slick.

Nice work. Why don’t you use a blade guard? You protect your eyes with safety glasses but you could do a much better job of saving your hands with the blade guard in place for almost all cuts on a table saw.

How does your fence go past your out feed extension? Oh well.

Hey mate. At 01:34 you join like melamime and looks like mdf? Or particle board? May I ask why? I'm guessing you purchased thinner melamime and another substrate to make thicker stock? Awesome content BTW.

I just bought a Sawstop few days ago, i was wondering what type of material you are using on top that plywood? thanks great job by the way.

You do have to spend some time setting the saw up... blade, fence, etc. But once done, the saw is great. Fairly compact which is Nice kzfaq.infoUgkxXh-4_3-ZT1fFWP91ZV7iVqzElr0lEb-a I did get an Incra Miter Gauge which takes some setup as well. The stock miter gauge can be adjusted in the miter slot with a little painter's tape... this tightens up the side to side play a lot.

Did that new saw come with a blade guard?

Hey mate cheers for these videos! Really helpful. Could you please tell me what model Sawstop table saw you have purchased there? Cheers

Where do you source your black phenolic faced plywood sheets?

Is that some type of black coated hardboard for the top? Or is it like Formica?