Build list??

"Custom bolt carrier release and charging handle. Textured grips, should your hands get... Wet. An itallian classic!"

No bull shit no baffoonery straight to the point and details, I love it

I like how you semi violently throw every part onto the table to add excitement

when he pulled out that EOTECH box, my wallet done screaming "BRUHH"

This was a nicely edited video. I've never seen anyone install Mlock like that. I usually just twist the locking piece by hand then insert and tighten. It makes me want to upgrade my M4.

one of the most satisfying videos on this playform

Snap ring pliers would be a good addition

Nice build 9/10. The Eotech is my only major criticism. They are bit heavy for me for the application, and I prefer less interference in my field-of-view when tracking moving targets. Many would disagree; but they haven't ran drills in the 100 degree sun beating down. Eotechs are not light, and ounces turn to pounds in the real world. Those quick targets turn into a challenge over a few hours. I opted for a different rear stock and a light-weight holosun for optics. I also immediately coated mine a lighter tan. Black is not friendly in the sun. I have a slightly different flashlight setup that doesn't have so much excess cable, but that's easily alleviated. Snagging is never fun. Otherwise, 9/10. I would move the extra shell carrier just a bit forward for my long hands, but otherwise; mine is set up very similarly. I did run a fine steel-wool cylinder brush through the magazine tube to polish the feeding though. Mine was a little rough from the factory, and the friction inside the tube was noticeably impeding some shells. It was not enough to cause malfunctions, but it was enough to notice if one has any time behind the system. After just a bit love TLC though, it felt much better. I also deburred many sharp edges with slight beveling to save my hands and gloves. My ejection port was especially sharp in a few small areas and just needed a few passes with my stones. I highly recommend everyone to spend just a little time on their "Turknellis". Some of the early imports need a lot more love. The newer ones seem to have much better machining and finish quality. That being said, a little preemptive attention can go a long way!

You have nice taste and don’t load with unnecessary bs. I subscribed bro keep them coming🤙🏼

Bro, i always wanted a Benelli m4, but couldn't afford and yes i have heardof the Turkish clone but was kind of avoiding to buy one of those but after watching this im definitely going to buy one now and im subscribing to your channel, thanks man now my dream will come true

Beautiful build!

What a coincidence... I also upgraded my MAC 1014 a few days ago. Mines has the marine finish and all I did was upgrade to the MI rail, MI charge handle, vert grip, and the RX arms extension tube for matching finish. At this point most of my "airsoft" things are slapped with MI parts.

Congrats- you've now spent enough to have just bought a Benelli in the first place.

Best asmr, what i ever seen. 😁

That was strangely satisfying to watch

You’re nice with it man.

As a non gun owner from Australia i would have loved to see a little description of what the part is that is coming off the gun and what the benefits are of the upgraded part going back on.

Dope build 🔥

Another amazing build! This channel is fire!

Best ASMR Ever!

Fully loaded pump action shot gun 😊m loving it 🥰

This reminds me of those cars that look beat to shit on the outside but has a thousand dollar sound system inside.

I wish there was more content like this on YT

I thought I could one up a Stranger grocery shopping one time by telling him you could get a poor man's Benelli the brand name stroker he went UPS me by telling me you can modify it to be a Benelli. Great to see a video demonstrating what this old man told me

Love your work, Cheers

*shotgun bros* just one more shell bro trust me i just need one more no its totally normal to carry a shell in the chassis outside the tube its another shell bro cmon one more shell

I have this exact shotgun. The Midwest industries. M lock rail is beautiful. Only thing I didn't like was the cable management. I think you could've done a tad better in my opinion

1k of accessories on a 500 dollar shotgun. But I enjoyed watching this nonetheless.

Throws parts around like a professional

"And Mr. Wick, do enjoy the party."

Misleading video title… this is the perfect amount of upgrades for any weapon.

Thanks bro I knew you would do it right putting my new gun together can't wait for you to ship it back to me 😄. Im Jk nice build. 👍

" Could you recommend anything for the end of the night ? " " Something big, bold ? " - Mr Wick " May i suggest the Benelli M4 ? " - Sommelier

Dude dope build video

I woulda put tritium sights instead of a holographic. Still cool upgrades though.

I think you’re not an idiot like the most of them that paying $1500 more + upgrades for the same gun,well done bro you’re smart guy.

Im watching this just wishing i had the spare money for the gun, let alone half of those after-market parts

This is so nice like I like a good monologue but from some people it’s so annoying

Que pena que aqui no Brasil a gente não pode comprar nem a arma e nem todos esses acessórios, primeiro porque a lei não permite o cidadão de bem ter sua arma para defesa e, segundo que é tudo muito caro, a arma em si já é uma fortuna e cada acessório desses também custam uma fortuna!

I really wish there was a cheaper alternative to the actual m4 stock than just buying the real deal. This guns close enough though

Very entertaining and informative content 👏 thanks

I think the upgrades cost twice as much as the shotgun.

Damn.....Well Done!

All that extra stuff on a Benelli clone😂 why not get a real one?

Sick freaking gun. I would’ve put the hand stop and light control further forward though. You won’t be able to quick load 2-4 shells at a time with it so close to the loading gate.

Watching this hurts my bank account

i just got the nickel m1014. that shit is an insane value. $380ish OTD.

its impressive i thought youtube didnt allowed that kind of content but i am all for it its so cool./

Very cool man, I'm in a country where you can't own guns

Sweet ride

If you are in the US, you Might want to pick up some more US made parts to be 922r compliant. Import M4 shotgun with 7 round magazine tube and no collapsible stock: needs 3 parts if that stock is collapsible it needs 4. Hand guard and follower make 2. if the 2+ extender is us made the atf still doesn’t count it. Have to replace the whole tube with a US made one. Freedom fighter has lists on what counts.

Wish you would have posted a build list for this

Brother get some C ring pliers.

Do this for more shit, It was amazing to watch

That's fire 🔥

Awesome upgrades! Are you going to do the stock too?

Best company Benelli ❤

dude VIOLATED that snap ring

If it's what you need it's not over upgrading, just upgrading

PRESSSSSSUURRRREEE!!!!!! Subscribed and Liked!!!

Yeah will be on e-bay parts for sale with my skills. Nice

Boar's shots, turned into tactical forces!

Sick build man, I'm doing a very similar one when mine comes in. Does the stock fully collapse like an M4?

$400 clone compared to $2400 original. If you spent $1000 on parts still a good project.

I need a build list for this beauty

400 dollar shotgun 1000 dollars worth of parts! Got it! Sheeit

Hey man can you do an ak video if you already have I’ll look for it thanks

Nice video. I like how you titled it, kinda knowing it’s just overdone. Looks like a tactical build once you put the flashlight on. I don’t get the matchsaver round on tactical shotguns I switched to shotgun cards on the side. Every long gun needs a sling so you can free up both hands. Only question I have is how useful an eotech and flashlight at night are?

That was friggin awesome how much was the total upgrade?

Hey Great content Bro. Earned another sub Thanks for sharing. Could you do a parts breakdown like you did for your spear video. I am really digging this set up and would like to get something similar or see what the cost range is for something like this. Thanks and have a good one!

Accessories for this cost more than the gun itself -

Very nice 😊

I don't think I've felt sexual attraction like this in my life

👏👏👏not bad 👍

Bro threw another $5000 on top of the gun.

А потом вышел такой с респа....голова,глаза, гг, топ

the day i know i can just buy a clone

dremel the loading port 3-gun style

Có vid khẩu sig spear ko anh giai ơi

me in video games:

Congrats you just turned a 499.00 dollar shotgun into a benelli M4 Should've just bought the benelli.

This video is monetized bro? How? I thought “they” don’t allow us to do this.

For those who have one: do you see this shotgun as a dependable home defense weapon? Why or why not?

$500 shotgun? *check* $2,000 worth of attachments, making it the same price as an actual benelli M4? *check*

Damn very nice how much did you spend on the upgrades?

Holosun is half the price and does the exact same thing

Only clone that lives up to the hype is the orthos raider s4

Looks sweet. How does she run?

I'm considering on getting one and purchasing some upgrades. How did it run compared to when you added the upgrades to the shotgun?

So you for got the ported barrel you can get these days 😜 lol

Did you end up using the stock magazine tube spring or the one that came with mag extension??

I luv this set up. Do u have a link for options?

The eotech sights are fantastic but they are so huge! Look too big on guns

How much did it cost after you were done with the weapon? How much is the weapon cause

Awesome. Now does it actually work?

Mag tube spring is too lax. Will fail to feed. Also for anyone else take the gun out and run a minimum of 500 rounds through it. That way do don't buy a bunch of stuff for a junk gun.

Wery good . thanks for video. Do you love MAC 1014 ?

thinking about getting a turknelli, stuck between the panzer m4 and this

real ASMR