For a moment, I was thinking this guy knows nothing about upgrading a firearm, but then I saw the sharpie and I stood corrected.
@babayaga91022 ай бұрын
why did he mark that screw
@damiangutierrez67442 ай бұрын
@@babayaga9102 Sharpies and oil markers are useful to see if screws have gotten loose with recoil over time
@ericc25303 ай бұрын
Putting b5 stock on that just makes it unfoldable
@vietnamtactical3 ай бұрын
Check out the short on it
@rusty9008Ай бұрын
@@vietnamtacticalcan you please link the parts that you used to replace the foldable stock? I live in CA and need to replace mine to make it compliant.
@YooperMan9063 ай бұрын
Very nice. I just ordered a PSA JAKL. Very excited to get it to add all the goodies haha
@ethancook20752 ай бұрын
looks great bro, got myself the spead 308... was a blast upgrading it
@Jwalls19804 ай бұрын
Nice video. Personally I’d never order a trijicon off Amazon to many fakes. Optics planet way to go
@MugenZeroX4 ай бұрын
As long as they say it's in stock, those wait times for back orders be something else
@vietnamtactical4 ай бұрын
When it says prime it’s legit, they do a check themselves supposedly but it did come out to be real i scanned the data matrix on the side to confirm it
@matcha_5464 ай бұрын
Rather deal with amazon customer service then optics planet. Don't have to deal with restocking fees nor deal with the bs customer service that you get from most 2a websites
@vietnamtactical4 ай бұрын
@matcha_546 yup trying to get a suppressor and customer service is incredibly horrible
@matcha_5464 ай бұрын
@@vietnamtactical haha damn straight
@Zach2A4 ай бұрын
that thing is gorgeous 🤩
@dalalmuxiyo4 ай бұрын
I would like more utubers to to this Fantastic video
@vietnamtactical4 ай бұрын
Appreciate it🙏
@xpatrickchoi2 ай бұрын
Sig makes a shoulder collar (sometimes they include it in the box), and it can be used with muzzle devices that require a 90-degree shoulder so the muzzle device is on straight. If you plan to suppress this, you might be at risk of a baffle strike. I can see the shim crinkling and you can't be sure that it's on completely straight. Surefire also recommends Rockset and should have been included in the box.
@vietnamtactical2 ай бұрын
I had someone tell me about the collar the day i posted this luckily i changed it asap
@vietnamtactical3 ай бұрын
I CHANGED THE STOCK WATCH THE SHORT…
@Quinlan.Monroe2 ай бұрын
Yo do you have that brace still? I'll buy it from you
@vietnamtactical2 ай бұрын
@@Quinlan.Monroe no i do not sorry brotha
@MichaelArmenta-ne3puАй бұрын
Do you like the spear LT better than the mk18?
@vietnamtacticalАй бұрын
A lot better than the MK18
@bryanlittle357011 күн бұрын
Nice rifle! But I'd love to see a video, of when you need to change the battery and remove the comp. Red lock tight is a bold move for those applications.
@vietnamtactical8 күн бұрын
Next time the muzzle gets removed is when i get it chopped to 14.5 haha
@police270th3 ай бұрын
It's very nice and well made. 👍
@4rnnr_asАй бұрын
Very nice build!!!!
@vietnamtacticalАй бұрын
Thanks!
@a1v1753 ай бұрын
Sorry to tell you, but you're going to have an issue. On the MCX you need to run a taper adapter if running a non tapered muzzle device. It doesn't stay square if you mount a suppressor.
@vietnamtactical3 ай бұрын
I had got one a day after, its on it
@greentipammo4 ай бұрын
That nice bro, Now it's time to upgrade it to 300blackout..
@kennyphelps11602 ай бұрын
I definitely would have used blue Loctite. Do you need anything? Is that you should have used the SIG shoulder adapter when you put the warcomp on SIG has a tapered barrel and you want to make sure you get a true alignment.
@vietnamtactical2 ай бұрын
Im uploading a long form video about it that, i so have the shoulder adapter on it now
@Gontzlol3 ай бұрын
Happy for you man. Not what i would put on it myself but still, neat.
@iammgokkuu29825 күн бұрын
having this and still miss
@KamDaGravySeal2 ай бұрын
nice build i'm on my 3rd lt great gun
@charliea372316 күн бұрын
Keep working on your guns beautiful toys
@kennyphelps11602 ай бұрын
You know you’re a gun guy when you have a vice in your living room😂😂😂
@Chasetactics2 ай бұрын
This is one of the best looking rifles out there! Although imo I don’t really prefer the acogs, but great optic. Love the vid man! Sub
@Chasetactics2 ай бұрын
Personally I like the eotech with magnifier 💯 pretty expensive though. Seen you’ve tried it, doesn’t suit everyone.
@vietnamtactical2 ай бұрын
@Chasetactics had that combo on the mk18 great option as well
@Mr.GoldmanbachMajorian2 ай бұрын
Fire build bro🔥
@Flashhideronly2 ай бұрын
I have the same set up only on a rifle I trust more. And I’m right handed
@Hiddencomment0073 ай бұрын
fkn love it bro! excellent taste and good choices. i personally would use a tan crt stock, fde bcm mod 3 grip or the k2 + grip in fde. maybe a surefire brake instead of the warcomp. i hear they lock up easy.
@vietnamtactical3 ай бұрын
I didnt want a brake since im not going for purely recoil mitigation. I did change the stock to the Midwest Alpha series stock since the sopmod couldnt fold
@marcusd32124 ай бұрын
This is sick as fùck! Love the sig rifles! I dunno about that b5 tho. I like the original fixed one over that b5 adjustable. Curious what the black sig adjustable would look like on it. Could always paint or have it coated fde.
@vietnamtactical4 ай бұрын
Ive updated the stock since i couldnt fold the b5, check out the new short!
@liggerstuxin12 ай бұрын
IMHO the RMR is better in the ACOG. But a good canted setup is good too.
@patricksuper85215 күн бұрын
I love watching these videos. People improving their firearms. NOW TRAIN.
@andreasebner22092 ай бұрын
Well done
@rusty9008Ай бұрын
Hey @Vietac great video! Can you please list which parts you used to replace the folding stock with the tube stock please?! I just a Spear LT today and live in CA. Thank you 🙏🏻
@krisztianvarga3035Ай бұрын
I almost cried when you changed the stock😬
@vietnamtacticalАй бұрын
If you owned a spear you’d understand its garbage
@krisztianvarga3035Ай бұрын
@@vietnamtactical Have you ever tried AMD-65 with factory stock? 😂
@vali69Ай бұрын
Sometimes I envy americans for being able to get any guns they want and tinker like this, then I remember I could do the same with airsoft gbbrs that work similarly to real guns with a steel bolt that goes back into the buffer tube, but with much less recoil yet still present unlike electric airsoft rifles. Like there's a manufacturer in taiwan that makes super realistic gbbr replicas called viper tech, they're like 1300 to 1500 dollars, so almost just as much as the real things, and they're made using the same materials and even techniques, but they shoot little plastic balls instead of lethal lead going over the sound barrier. Anyways, wouldn't an lpvo be a better option? Like a razor hd or vudu? If not one of those budget vicoptics?
@vietnamtacticalАй бұрын
LPVO’s are too brittle and serve no real purpose to me. Extra weight for an optic that would only utilize the minimum and maximum zoom, nobody uses the zooms inbetween
@HarrisonBoyd-i7u24 күн бұрын
You need the taper adapter for the flash hider
@vietnamtactical24 күн бұрын
I have it on it now, had someone tell me earlier👌
@ghostzero18892 ай бұрын
Damn some of the parts you put on don’t need to be very tight as long as it’s good
@vietnamtactical2 ай бұрын
Whole update on the setup on my newer vids
@liggerstuxin12 ай бұрын
4:05 did you boil the muzzle brake? The Sig Rocksett is legendary.
@vietnamtactical2 ай бұрын
No i didnt, i have a video using this same method and it just comes right off. The thing some dont know about loctite/rocksett is gradual torque will never do you any good you need to use impact torque to break the threadlocker
@liggerstuxin12 ай бұрын
@@vietnamtactical as in an impact hammer/wrench? I don’t think I’ve ever seen that. I’ve seen people use an absolute rapid boil. As rapid as the boiling can get. They said it in the water for 20 minutes and then it unscrews. Barring that I’ve never seen anyone able to remove it lol
@vietnamtactical2 ай бұрын
@@liggerstuxin1 im not sure if impact is a proper term. Imagine pushing someone as gradual and punching someone as more of an impact force. In the long form video i posted about it i believe everyone who commented said it worked, you should check it out its only a couple minutes long youll see what i mean
@hackerforse333 ай бұрын
Nice vid! Take my subscription
@ronaldmacaraig6518Ай бұрын
wow❤
@John-Wick3214 ай бұрын
im too broke to afford one but if i could i would LMAO
@wanghafHUN3 ай бұрын
Nice gun
@KevinoftheCosmos4 ай бұрын
very nice
@shadowwolf2.074Ай бұрын
1st of all it's a great looking weapon system great weapon system overall Second of all the foregrip is backwards
@vietnamtacticalАй бұрын
On purpose
@shadowwolf2.0747 күн бұрын
Thank you and why
@vietnamtactical7 күн бұрын
Ergonomics, better when hands are sweaty
@Flammin10004 ай бұрын
how the hell did the muzzle break come off so easy wow lucky
@vietnamtactical4 ай бұрын
Try how i did it in the video its that easy, i have another vid showing how i take any muzzle off with nothing but a wrench
@MySkobi2 ай бұрын
Are you left handed? Just wondering why you would cant the rifle to your right to fire on a red dot. Otherwise great rifle, nice look, good work.
@vietnamtactical2 ай бұрын
Yes
@MySkobi2 ай бұрын
@@vietnamtactical explains. Does the ejecting work both ways? I never held/tried the Spear in person. Edit: I saw it at IWA, but now I’m choosing between the Spear and DD mk18 milspec.
@vietnamtactical2 ай бұрын
No it doesnt work both ways, ive owned a mk18 and ill tell you the spear is a better investment, it comes with an adjustable gas block so you can run it suppressed without getting gas in your eyes and lungs it is more accurate as well
@MySkobi2 ай бұрын
@@vietnamtactical that helps me a lot bud. I was just looking at the prices. In my country Spear LT or even MCX is around 300-500€ cheaper than DDM4A1 or MK18. And now there is only two oprions for me: DDM4A1 or Sig Sauer MCX. Both in .223 with a 14.5” barrel. I need to test them first to see which one is a better fit. But SIG offers much better customer support and spares. We are also neighbours to Switzerland, so it doesn’t cost me that much to just ride to their factory store and buy stuff. Any more suggestions?
@lamarisr96994 ай бұрын
This was a dope video 👍🏾
@kenjwtf-13 ай бұрын
Hell yeah!
@Ready174 ай бұрын
Pretty slick setup my dude, one question though... By the way your light is setup, I imagine you're a right handed shooter, but the offset RMR is setup backwards from how most righties would run it. Any reason?
@vietnamtactical4 ай бұрын
I am indeed a left handed shooter but the light is far enough forward that it doesnt get in my way when im handling the switch
@TeeJaay88884 ай бұрын
nice vid man, i've got the spear LT 7.62*39, trying to get a can now since ATF approval date improves. i heard the muzzle device is extremely hard to remove, have you tried to find any gun smith to remove it ?
@vietnamtactical4 ай бұрын
Did it myself easily, check out my long form youtube video on how to remove muzzles, it took me less than 10 seconds to do. Even showed it in this video of the muzzle just coming off. All you need is a wrench
@oliverleong48044 ай бұрын
Before/Aftet?
@itsbigbad20502 ай бұрын
Yea I always liked the idea of the sopmod stock but the thing is just too stupid, better off with a CTR with a chin riser
@vietnamtactical2 ай бұрын
Alpha AK stock on the Sig folding adapter is king
@Jiplr3 ай бұрын
must be nice
@riiddisbuk24964 ай бұрын
ASMR, you upgraded a rifle that MAAAAAYBE needed a few things, but you put waaaay to much :P Good stuff. Now transfer it to me :P
@vietnamtactical4 ай бұрын
Only put like 5 things on it😭
@riiddisbuk24964 ай бұрын
@@vietnamtactical That stock is overkill. You could've used it to keep in a smaller backpack ;( I'm indifferent with your change for grips, but I do love that rubber magpul grip :) Was the change of a flash hider really necessary? You could've got a good muzzle brake :P Optics are clean. Foregrip is aight (would've used dat Daniel Defense Picatany grip :P). And the flashlight... gives the targets the "spotlight" :P
@vietnamtactical4 ай бұрын
@riiddisbuk2496 i hate daniel defense grips, the angle helps a bit, also on my more recent short i changed the stock to a more low profile one that i can adjust it looks so good, and yes im getting a suppressor soon, and im already good at controlling recoil to an extent, i picked the surefire warcomp since its the best of both worlds, im a more tactical guy so muzzle breaks imo suck way too much flash. You should def check the shorts out man👌👌👌
@riiddisbuk24964 ай бұрын
@@vietnamtactical There is an mlok version of DD. But whatever works for you. I just love that picatiny grip :P
@hawaiianpunch67832 ай бұрын
I can't tell what hand you shoot with your RMR on one side and your switched light on the other...why?
@vietnamtactical2 ай бұрын
Im left handed but the light on the other side is just more comfortable for me
@1995keandre2 ай бұрын
You didn’t add the adapter before you added the muzzle device.
@vietnamtactical2 ай бұрын
I ordered it and installed after this video
@samde3 ай бұрын
bussin
@BUITACTILE4 ай бұрын
You gotta torque, your flash hider with a wrench fam 😂😂
@vietnamtactical4 ай бұрын
Cant see it but i did…
@royce35823 ай бұрын
Can the stock still fold or does that only work with their thin stock?
@vietnamtactical3 ай бұрын
Yeah it couldnt fold i returned it and got the Midwest Industries Alpha AK stock and it folds perfectly
@royce35823 ай бұрын
@@vietnamtactical thanks!
@itsbigbad20502 ай бұрын
Is that left sided canted site ok with you? I woulda put it on the other side, but Im sure its user preference and I've just never seen anyone do that
@vietnamtactical2 ай бұрын
Im left handed
@tangy25Ай бұрын
Do you have a list of all the items bought including the scope?
@vietnamtacticalАй бұрын
In my spear lt breakdown video its in there brotha
@tangy25Ай бұрын
@@vietnamtactical 🙏🙏🙏
@prabh456Ай бұрын
how many shims did you put for the warcomp?
@vietnamtacticalАй бұрын
Only the big shim thats it, but all threads are milled at a different angle so youll either be lucky or have to keep repeating the shims
@SầuTHẦn-d7t6 күн бұрын
a oikhau nay choi ntn
@Izumi1_2 ай бұрын
What pocket knife are you using ?
@vietnamtactical2 ай бұрын
Its an ULTA utility knife
@Izumi1_2 ай бұрын
@@vietnamtactical tysm!
@AirMaxAtzeKtbАй бұрын
in germany you just cant buy the spear :(
@vietnamtacticalАй бұрын
Hopefully one day every country will see guns as just tools
@wrath78794 ай бұрын
Hey bro i got a Ta50 ACOG yesterday for $300 I’ll let you know if i like it
@vietnamtactical4 ай бұрын
Really good deal hope the 3x is crisp n clear
@Dusty964 ай бұрын
Y is the front grip on backwards??
@joee.96984 ай бұрын
I do the same thing, its for a better angle of grip to hold on to. Works best when C clamping.
@vietnamtactical4 ай бұрын
Just like joe said, better for a clamped grip
@FransErson2 ай бұрын
Warning: for display use only, firing this weapon is prohibited
@Furiouspenguin2711 күн бұрын
What do you do for a living?
@vietnamtactical8 күн бұрын
Military but I make a bit of passive income
@DeaZyy_3 ай бұрын
put a EOtech vude on that bihh and get rid of the ACOG and canted RMR
@vietnamtactical3 ай бұрын
No Eotech LPVO’s suck. In my experience and personal preference I like something I can bang around and offers a more clear sight picture also something that doesnt require me to move my shooting or support arm just to change magnification. If you have a Vudu id sell it and buy a vortex razor hd II 1-6/1-8.
@cartagena91Күн бұрын
Did you really use red lock tight
@vietnamtacticalКүн бұрын
Rocksett is almost the same if not harder to deal with lol and thats what comes with it
@markjacksonmusic213 ай бұрын
Can you provide the parts number for the stock and tube? Getting my LT next week!
@vietnamtactical3 ай бұрын
I would get the Midwest Alpha series stock over a buffer, these are the parts otherwise. MOE K2+ Trijicon Acog 4x32 Trijicon RMR Arisaka Offset Mount BCM Gunfighter Mlok Grip Surefire Warcomp + Taper Ring Surefire x600 w Surefire Button Railscales Mlok Rail Covers I think thats it
@markjacksonmusic213 ай бұрын
@@vietnamtactical Hell Yeah! Appreciated!
@2AToday3 ай бұрын
Too much sound. Not sure how best to put words to the issue. Every little paper crinkle sound, plastic baggie opening, tool turning and cardboard ‘roughness’…..makes my skin crawl. I don’t understand why anyone likes this “ASMR” stuff. I love what you did with the rifle. Looks awesome!! Please consider not doing the extreme asmr audio. One technical thing: the muzzle device needs to be installed with a taper collar. Sig sells one, and so does Midwest industries. Also loctite shouldn’t be used on the barrel/muzzle. Rockset instead.
@vietnamtactical3 ай бұрын
You had 5 minutes and 14 seconds to either click off the video or turn the volume down😭. I do have a taper ring tho thanks for the heads up
@carbon8ed3 ай бұрын
What wrench did you use to crank the muzzle device off?
@vietnamtactical3 ай бұрын
I used a 7/8th Pittsburgh wrench
@carbon8ed3 ай бұрын
@@vietnamtactical thanks
@liggerstuxin1Ай бұрын
Was the Rocksett an issue?
@vietnamtacticalАй бұрын
No, i use an unusual method of taking muzzle devices and barrel nuts off that works on literally everything, i have a vid on it somewhere everyone whos watched it it worked for
@liggerstuxin1Ай бұрын
@@vietnamtactical I checked through your content and could not find the video. Do you put it in a rapid boil for 20 minutes? That’s what everyone says. Or intense heat. Do you maybe just have a link to the video? I hate to be this annoying…
@vietnamtacticalАй бұрын
@liggerstuxin1 kzfaq.info/get/bejne/nZlgZZteuLqrpps.htmlsi=pWvYTdA5ziOhq61c lets hope they dont delete my comment for sending a link but this is my video, i use this method for every muzzle
@ralphfrasca4168Ай бұрын
How much did you pay for the acog??
@vietnamtacticalАй бұрын
$1100 or $1200 something around that
@ralphfrasca4168Ай бұрын
@@vietnamtactical thank you… and your spear came out really nice 👍
@najimlatif13834 ай бұрын
Was it hard to remove the Rocksett Sig Muzzle Device?
@mikeangel80174 ай бұрын
Heat up along the threads with a small torch on any device and remove quickly.
@vietnamtactical4 ай бұрын
Not at all, i have a video somewhere on my youtube showing how to remove any muzzle device with just a wrench and the floor, i didnt use heat or anything. It took me 10 seconds to remove the muzzle
@_n_e_r_o_k_86634 ай бұрын
Hola alguien sabe dónde puedo encontrar más videos como estos ??
@vietnamtactical4 ай бұрын
Im not sure if there is a specific category
@D4sboot3 ай бұрын
"AFTET"
@HWG-wm8ld2 ай бұрын
Upgrading? You changed some items. Don’t people cry rivers about needing to do this to Glocks.
@vietnamtactical2 ай бұрын
Well i dont since i got the money for it. I did a lot more since this video im making a long form vid about the spear soon!
@RickDeckard20493 ай бұрын
still a bendy boi
@vietnamtactical3 ай бұрын
Tighten the barrel clamp and it fixes that issue
@genemalburg7853 ай бұрын
You a lefty?
@vietnamtactical3 ай бұрын
Ye
@MrOmani-w9kАй бұрын
😂
@thekirby5319 күн бұрын
ewwwww, he's a lefty!!! lol. nice set up though.
@rohnek23 ай бұрын
looks unfired...
@vietnamtactical3 ай бұрын
Literally brand new in this video… maybe you should look at my channel lmao
@rohnek23 ай бұрын
@@vietnamtactical looked at all videos with shooting in it, can confirm it is unfired
@rohnek23 ай бұрын
@@vietnamtactical so its unfired then….
@vietnamtactical3 ай бұрын
@rohnek2 as of now no almost at 1000 rounds 50-60 rounds off. If i have a video showing me firing 1 round i dont need to record the rest. But im sure your PSA lineup has a couple rounds thru them
@vietnamtactical3 ай бұрын
I can confirm youre a troll.
@AJPPP3 ай бұрын
cant upgrade garbage - still a turd
@vietnamtactical3 ай бұрын
My rifles barrel doesnt lose zero when i press on it, does yours?😭
@HERMACIDE772 ай бұрын
Lame.
@vietnamtactical2 ай бұрын
Avg psa ar owner 👆
@keithgormley9743 ай бұрын
Sig=garbage
@vietnamtactical3 ай бұрын
If i got the money why hate
@keithgormley9743 ай бұрын
@@vietnamtactical no hate on you. They make a garbage product.
@lanzi79123 ай бұрын
@@keithgormley974 How you hating outside the club, you can't even get in.
@keithgormley9743 ай бұрын
@@lanzi7912 BCM OR COLT IF YOU WANT A REAL RIFLE. SIG=GARBAGE.
@I_Finger_Triggers4 ай бұрын
Call Sig and they'll send you the little collar for your muzzle devices.
@vietnamtactical4 ай бұрын
Will do👌
@marcusd32124 ай бұрын
Yup! Call sig get the collar. Then use the shims for proper timing. When using rocksett make sure to clean the threads properly and make sure no oil is on them. Alot of people have had issues with rocksett not working cause they dont clean the threads before installing muzzle device.