Overrated or Underrated - The Two Bucket Wash Method...

Рет қаралды 16,554

Күн бұрын

Is The Two Bucket Wash Method overrated or underrated? We discuss in this video...
PRODUCTS USED IN THIS VIDEO:
Wash Mitts: amzn.to/3hhmrP1
Wash Pads: bit.ly/3jrIFAA
Microfiber Towels: amzn.to/3x5hYFJ
Buckets: bit.ly/2LKZhV7
OTHER TOPS PRODUCTS I CURRENTLY USE:
Soap: amzn.to/3qfFaNO
Foam Cannon: amzn.to/38CxzCG
Car Wash Mitts: bit.ly/39jIYq8
Flex Blower:
Clay Bar: amzn.to/39uskEz
Buckets: bit.ly/2LKZhV7
Grit Guard: amzn.to/3i76YAY
Iron Remover: amzn.to/38Dkc5u
Tire Brush: amzn.to/2XC9GF3
Tire Cleaner: amzn.to/3sj1Cal
Rim Brush: amzn.to/3nG4CKx
Rim Barrel Brush: amzn.to/3bLePmP
Compound/Polish: amzn.to/3nBDpZy
DA Machine: amzn.to/2MTkqwF
Pads: amzn.to/3qfDKCI
G techniq C5 Wheel Coating: amzn.to/3bwZ56H
Ceramic Coating: Trade Secret
PPF Ceramic Coating: amzn.to/3oGJkO9
Tire Shine: amzn.to/3sh5o45
Drying Towels: amzn.to/39qdQ8G
MF Towels: amzn.to/2Xzfrn3
Pressure Washer: bit.ly/33J82V0
Jimbo's Detailing Creates the best auto detailing videos on youtube. From ASMR, Satisfying filthy car details to product reviews and torture test.
PICK UP THE JIMBO HAT: jimbodaily.com/products/jimbo...
SUBSCRIBE TO MY CHANNEL: kzfaq.info?...
CONNECT WITH JIMBO:
PODCAST STORE: www.JimboDaily.com
PODCAST: www.AutoDetailingPodcast.com
FACEBOOK: / autodetailingpodcast or / jimbo.balaam
INSTAGRAM: / theautodetailingpodcast or / jimbobalaam
PO BOX:
Auto Detailing Podcast
1077 E. Pacific Coast HWY
Seal Beach, CA 90740
#SatisfyingVideos #AutoDetailing #DetailingASMR

Пікірлер: 230

@j-sonS 3 жыл бұрын

Two buckets...one bucket is for placing the discarded wash mitts. Then when you're done, add water and microfiber detergent to the bucket and let it sit for a while.

@AntLive29 2 жыл бұрын

Great idea

@killerinst1ncz308 3 жыл бұрын

I use 2 buckets…….. 1 for the paint 1 for the wheels.

@StealthyyyHD 3 жыл бұрын

Wash the wheels last problem solved

@stvcrgy55 3 жыл бұрын

I use one bucket and I rinse my mitt on both sides before putting it back into my wash bucket.

@jonnybravo3055 3 жыл бұрын

Same 👍🏼

@gabevillarreal96 3 жыл бұрын

That's exactly what I've done for 30 years💯👍🏽👍🏽

@troy14roy14 3 жыл бұрын

This is the future washing methods. 1000 of mitts it’s not future, it’s a waste of money. But the 2 bucket it’s over since I began detailing 😂 I never understood this joke.

@KiranPatel-fk1pg 3 жыл бұрын

Rinsing the mitt is great but can be quite slow. Personally I find 4 deep pile plush 70/30 microfibers to be a safe and quick way and is much more realistic then 10 mitts as each towel has 8 sides.

@calvinwong365 3 жыл бұрын

Same. And I use Walmart and Canadian tire buckets. Fuck these companies charging $30 for just a bucket. Bigger rip off than all these house prices

@thebrasstack6523 3 жыл бұрын

THANK YOU. I’ve always thought the two bucket method was a little ridiculous and overkill. lol

@ChicagoAutoPros 3 жыл бұрын

Jimbo stirring the pot! Love it. I’m still going to wash with two buckets 🪣

@aeiouanddontaskwhy 2 жыл бұрын

Not really stirring the pot tho is it? Larry Kosilla uses the single bucket method and is one of the most well known and respected car detailers in the world dealing with some of the most rare and expensive cars in the world. No chance in introducing scratches or dirt back to the car with a single bucket discarding uses wash mitts once used. I am surprised more people don't do this, to me it's a no brainer.

@1stfrompuertorico568 3 жыл бұрын

2nd I use 1 bucket with 8 mitts and the 2nd bucket is just dry to pick up the dirty mitts so they are not on the floor or anywhere else.😄

@salvofarnia8046 3 жыл бұрын

Sad sack

@1stfrompuertorico568 3 жыл бұрын

@@salvofarnia8046 🤣🤣🤣🤣😝🤪

@MasrSR Жыл бұрын

I personally use the 20 bucket method, each panel gets its own drying towel and wash mitt also .

@davidsparling3505 3 жыл бұрын

Jimbo, you’ve gone against the “2-bucket system” psychopaths…this video should be pulled! 😂😂😂

@derek723 3 жыл бұрын

I'm always open for change, but I don't see the 2 bucket system being as antiquated as Jim puts it: -If you're a mobile detailer washing multiple cars a day, it doesn't seem realistic to keep 30+ wash mitts in your arsenal and constantly rotating them out -Use Dirt Locks instead of Grit Guards. Grit Guards do absolutely nothing in terms of trapping dirt at the bottom of the bucket. Source Garage made a good video comparing the two and it's pretty revealing how useless Grit Guards are -If you have a solid pressure washer rinse/pre-soak routine down, you're probably fine using one bucket, but two can't hurt

@bobdylan9117 3 жыл бұрын

the youtube censors asleep on the job AGAIN!

@rxdetailer1424 3 жыл бұрын

Nice one Derek. Always good to get a wide insight from various angles for different situations.

@KiranPatel-fk1pg 3 жыл бұрын

@@derek723 Just use 4 plush microfibers, with 8 sides each it's quick and safe since you always have a clean side.

@derek723 3 жыл бұрын

@@KiranPatel-fk1pg I might switch to that some day. For me, the downside there is how hard it is to get plush microfiber clean. No matter what wash method I use, there's seemingly always something still stuck in the fibers

@layzy24 3 жыл бұрын

Detail Groove used this method on a video a saw from him today and my mind was blown. Like crazy stupid easy and after doing the two bucket method for a few months because new car owner. Im doing this from now on. And you doing this method has me convinced.

@mag1vl 3 жыл бұрын

Hey Jimbo from Australia :) 2 buckets for me - 1 with 2 grit guards for washing the car and the other bucket for the wheels with tools n brushes just for wheels..

@whitewalker9622 3 жыл бұрын

Thank you for bringing this up! I´ve been doing this for the past 6 years

@TheAphrostar 3 жыл бұрын

I love reading the comments when you drop these controversial videos. Welcome back Jimbo

@TheCeki1982 3 жыл бұрын

Teasing the public YEAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAH.

@DilutionRatioOfficial Жыл бұрын

Have been using this method for the last threes years. Super efficient, tidier and reduces scratches! Got the idea also from Ammo

@adamsdetails 3 жыл бұрын

I currently use the 2 bucket method. I have actually been considering changing to this single bucket multi mitt method! As a professional detailer, this seems more efficient in every way. I think you have convinced me in my decision.

@chrisault2004 3 жыл бұрын

I saw this method used by Chicago Auto Pros once a few months ago. Immediately bought 12 wash mitts to use and haven't washed any other way since... I can't believe it hasn't been thought of before. I remember doing the 2 bucket method once and saw small contaminants FLOATING, meaning the grit guard would have been useless anyway and they I would have just picked them up when i "rinsed"; and I was disappointed I never thought of this method then lol. Great video Jimbo!

@brianrossi4679 3 жыл бұрын

Very good advice. Will be changing my procedure. Thank you.

@RoadToDetailing 3 жыл бұрын

I was thinking to try something different than the 2 bucket method, and actually, using multiple wash mitts was being one of my thought as well, so thanks for the reassurance and the tip! Great video Jimbo, just as always 🔥

@tonygagliardotto3433 Жыл бұрын

thank you for your pure honesty and straight forwardness!!! i would be more than happy throwing my money at your products or recommendations due to your honesty and saying what is really bs and not!

@Kiki099 3 жыл бұрын

The 2 bucket method had been standardized for years via forums, KZfaq, and detail academys.I started using 1 bucket 5 mits or pads and i never gone back. It just makes sense it's less complicated

@flexabigg1 3 жыл бұрын

I have been gone a while. But glad to be back. Something as simple as using ur head. Thank u!

@canadamike6397 3 жыл бұрын

Awesome video! I totally agree that this is the best way to avoid scratches and it saves water. This needs to be done more!

@gdeo 3 жыл бұрын

Totally use this method! Thanks for spreading the good word!

@johnnyringo4463 3 жыл бұрын

I dont think its over rated. It works. Still rinsing say, 80 percent of the dirt and gunk in the rinse bucket before going into the soap bucket. But then again I do a double foam when I wash. Foam it once to let it dwell and help get off dirt. Power wash that first one off as usual. Then I foam the vehicle again and use the 2 bucket method to hand wash.

@juice132 3 жыл бұрын

This is exactly what I was thinking before going to bed last night. Clarifying video. Thanks!

@tonysC8 2 жыл бұрын

Geeeezzzzzz That is amazing .....so simple but way better than the 2 bucket system !!! ZERO chance of contaminating your water . Using this method why would you even need a grit guard ?? The bucket never sees a dirty wash cloth . Excellent video...even better advice !!

@J1Z06 3 жыл бұрын

Brian from Apex Detail uses this method. I’ve tried it. It makes sense. Great video.

@ronb493 3 жыл бұрын

Sounds like you're trying to sell wash mitts/pads. What is the cost of an extra bucket of water? Plus now I have to clean all those wash pads.

@mr.lad-detailingtricksntip 3 жыл бұрын

If your mobile, the cost is extra space and extra water for not much benefit other than just the clients demeanor

@bobdylan9117 3 жыл бұрын

@@mr.lad-detailingtricksntip I used to do professional cleaning and a large portion of it is customer perception, not actuality.

@KiranPatel-fk1pg 3 жыл бұрын

Just use a few plush towels with 8 sides each

@areasonablethought610 3 жыл бұрын

@@KiranPatel-fk1pg per vehicle?

@KiranPatel-fk1pg 3 жыл бұрын

@@areasonablethought610 Yep, I use 4 TRC Eagle 500's which have very deep pile and fold them into 8ths.

@VIDEOHEREBOB 3 жыл бұрын

Exactly! Been doing this for months. It's so logical. One bucket, but 5 or 6 quality wash mitts, one for each section of vehicle. You never use the wash mitts more than once.

@erikalvarado1432 3 жыл бұрын

I love this vid! One bucket full of clean wash media, and one for dirty wash media, gonna be using this from now on!!

@autodetailingpodcast 3 жыл бұрын

Boom!

@DilutionRatioOfficial 3 жыл бұрын

I’ve been practicing your single bucket method with multiple clean soapy microfibre thick towels and pads for a year now! First got the idea from AMMO. Also I focus on the prewash process. I foam with my foam cannon twice so before touching the paint with the microfibre towels the lubrication is sufficient. What kind of towels you think are the best for the method?

@johnedds2327 3 жыл бұрын

I've been washing cars for 60 years, always hosed over first and one bucket method. Minimal swirls, but then my cars are washed weekly and never, or rarely have any grit buildup. So much marketing BS around car cleaning methods. Great video and long overdue.

@Carlos.Rivera 3 жыл бұрын

Oh snap.... you read my comment of the last of your video. More of these man

@johnketuroskey6293 3 жыл бұрын

hey jimbo....hope all is well for u and your loved ones. the first person to ever show this method was Brian from apex.....over 2 years ago....made so much sense i have been doing it ever since....stil 2 buckets as once done with used mitt just drop it into 2nd bucket.....now your subs know all about it too. have to ckout the autofiber "pads"....currently use cyclones(6 min)....another benefit is it is also a time saver....i wld estimate about 40% less time the more experience u have....be well my friend

@peterza15 3 жыл бұрын

I've been doing this for a while already. Works great

3 жыл бұрын

About a month ago, I started to use one bucket for the paint. Reduces cross-contamination by 100%. Not sure if I can go back to using two buckets.

@vanillaice8639 2 жыл бұрын

I only use this method. it’s very safe and easy. the more wash mitts u have the better

@johndunnington 3 жыл бұрын

Yep, this is how to do it! I also, foam the wheel/tire cleaner with a dedicated foam cannon then the tools get pressure washed before going back into the clean-water wheels bucket.

@TheCeki1982 3 жыл бұрын

A very useful upload that wipes nonsense off the map. No matter when, I always use an efficient (!) prewash that dissolves most dirt. Then I flush this away under high pressure. This is very important and does not take much time.

@carlj4992 3 жыл бұрын

I wash (maintain) usually every 1-2 weeks. I think the two bucket has always been stupidity see this video for obvious reasons. Here is what I’ve been doing for years again for maintenance washing as my cars usually aren’t that dirty because I keep them sealed/waxed and in a garage. Rinse first pressure washer then foam cannon rinse again foam second time use wash mitt if needed and rinse. Blower to dry and touch up dry with car towel. No buckets needed!

@wademiyataki9221 3 жыл бұрын

Makes sense to me. Brian from Apex Auto Detail does that as well. 👍

@claypatterson1968 3 жыл бұрын

I just washed my truck that way, a week ago. 10 microfiber towels. The whole time I was thinking, “Now this is “contamination free”. I think your right. The two bucket method is overkill. I do use one separate bucket with a guard for the wheels. I spray off the brush before dipping it back in.

@bobdylan9117 3 жыл бұрын

not sure why a bucket is needed for wheels. spray on chemical, use brush, rinse. I guess unless you are using microfiber on wheels, but when I do, I just hose the microfiber off between wheels.

@jimflanagan6029 3 жыл бұрын

Nice Jimbo. And why squeeze the dirty mitt or pad into the bucket in the first place , do it outside the bucket. Plus using a lance or soap gun you don’t need a soap bucket at all .

@nmore69 3 жыл бұрын

Finally someone said it ! It’s car washing . Not that difficult . Common sense .

@boogalu1964 3 жыл бұрын

I use one 🪣 and two different mits one for the top half of the vehicle and the other for bottom half but constantly rinse out the mit before returning to the bucket!

@Mdetailing 3 жыл бұрын

Great video I agree sir

@LSD04 3 жыл бұрын

Or you could do a proper prewash with a proper prewash because it doesn’t matter how many buckets or mitts you use, if the car is dirty and you put a mitt on it you’re moving dirt around.

@C25A1guy 3 жыл бұрын

I've been using a modified Garry Dean method for ages. Don't get me wrong, I'll keep a second "discard" bucket with a light ONR solution when I'm mobile and I know I need to touch another car later, but this along with using the foam canon to get soap on the car has been my method for years.

@MyGuyKirby 3 жыл бұрын

Tried all methods and yes using several mitts in wash bucket is easy. Problem is having more mitts than you need. Heck I have been using the big red sponge with my ONR solution and rarely damaged the paint

@nopassn0847 3 жыл бұрын

Great idea.

@dhaladetailing1225 3 жыл бұрын

Well presented! I have used this method for quite a while because it just makes sense! Use 2 jumbo pads and 1 wheel mit, doing the wheels last. If you do a good pre wash with apc etc, the car is really clean before contact wash anyway. Love the format mate! Quick detailers - over rated🤣

@notsodelusional 3 жыл бұрын

Belated comment: after rinsing and foaming, there is relatively little dirt / grit in the wash mitt anyway, especially if your vehicle is garaged.

@Coffeedad 3 жыл бұрын

Yes. That’s my favorite way to wash is with multiple wash towels soaking in one bucket but then i use a second bucket just to keep the dirty wash towels to be washed later

@Bikertyke 3 жыл бұрын

I've started using two bucket's. One for water. One for any microfiber cloths I've used. I use several wash mits. One per panel. I do use a normal small bucket for wheel's.

@ONI1013. 3 жыл бұрын

This is what I’ve been saying forever. I use about 8 wash mitts front and back. And when each panel is complete, I throw the mitts in a used bucket ready for laundry. I also “pre-wash” it with 2x foam cannon for good measure to get most of the grime off first before even touching car with any mitts.

@masterspin7796 3 жыл бұрын

1 bucket works for me, I been doing it wrong for 45 years...

@saulmtz7309 3 жыл бұрын

Personally i use the 2 bucket when the car is extremely dirty, i remember dumping the rinse bucket with tons of debris. On a maintenance sure 1 bucket does good

@ps238mb 3 жыл бұрын

I already use the method for a year or so. Best method in my opinion.

@rxdetailer1424 3 жыл бұрын

Nice one. Just a bit difficult for us with water restrictions to wash out the dirty mitts afterwards....👍

@ps238mb 3 жыл бұрын

@@rxdetailer1424 Washing machine? :) I mean you will save one bucket of water. I dont think a washing machine will cost that much more on water.

@rxdetailer1424 3 жыл бұрын

@@ps238mb Understood yes, I only have the big washing machine that uses a minimum of 10 galons per micro wash :) . So I guess either way the water restrictions get to me .

@ps238mb 3 жыл бұрын

@@rxdetailer1424 Oh... that sucks. Sorry for that :/

@rxdetailer1424 3 жыл бұрын

😆, Always looking for work arounds, going through ONR likes its the best thing ever. Have a good one 👍

@callsignstacks9936 3 жыл бұрын

Who makes that grit guard?

@adri28166 3 жыл бұрын

hello then how many gloves do you need? what would be 1 for 1 for trunk 1 for door 1 for ceiling? ... Thank you

@royhale7283 2 жыл бұрын

That’s the way Brian at Apex does it😃, good video Jimbo

@OCDaddyZsolt 3 жыл бұрын

I do exactly just like this :) One bucket and multiple wash mitts or towels. You can even skip the grit guard completely, since you never dunk a dirty mitt/towel to the soapy water. Just a bit of a plug to my channel: You can see me using this technique at all times.

@finaltouchautodetailingllc 3 жыл бұрын

I've moved on from this process. I've been putting 6 or so mitts in my soapy water but I also foam heavy after a prerinse and wash using a new mitt per panel

@areasonablethought610 3 жыл бұрын

Foaming is a waste of time. It's worse than using multiple buckets. Unless you charge $20 more just for that step.

@CaliVapor 3 жыл бұрын

After a good coating, Pressure wash, foam cannon, pressure wash, foam cannon, pressure wash with deionized water, blow dry. No touchy touchy. You said it, put a grit guard in both buckets when using that method.

@timmysuggs9189 3 жыл бұрын

I cannot get the links to show the products you have listed such as the soap.

@chrissimon8403 3 жыл бұрын

Agreed Jimbo, it's the only way to do it! And there is another grear detailer that does the same thing, I'm thinking you know who he is.

@MrXmannymanx 3 жыл бұрын

Yea I was doing this for a while and it was a hassle washing 2 cars. I also felt like I was using too much water (which I was). Now I just rinse the mitt off every now and then

@xpelcapecod 3 жыл бұрын

I never got on board with the two bucket method. I've always used one bucket with multiple mitts.

@kobaltseven 3 жыл бұрын

Thank you for putting the word out. I've hated the 2-bucket method from the very beginning. However, I'm not a fan of the multiple mitt method either. I feel like you're basically, incessantly creating a whole bunch of laundry for yourself every single time, every single wash...it isn't that much more efficient in my book.

@hatergeneral4298 2 жыл бұрын

pressure washing and foam should be enough for everyone

@ecozonedetailing1109 3 жыл бұрын

Thank you for this video. I am doing this one bucket multiple towels/wash mitts nearly 3 years and I am loving it. But funny if you not doing the two bucket thing than you are everything but not a professional detailer and you not know what you doing. At least that's some people's opinion.

@maximilianmustermann7140 Жыл бұрын

So you are using multiple rim brushes then too or... like one for each wheel because mine would already be dirty by using the first wheel?

@vamanoz5968 3 жыл бұрын

I agree a million percent with how the two bucket is a total waste!!!! It’s all about the marketing and selling more detailing tools! Great video!!

@clawmachinetime955 3 жыл бұрын

It’s not over rated I’m a professional detailer 20 years now you gotta have 2 buckets with the rinse bucket with grit guard

@areasonablethought610 3 жыл бұрын

It really makes no sense.

@1badhaircut 3 жыл бұрын

NO BUCKET METHOD - 2 JARS 1 get about 15 micro-fiber cloths 2. put them all in a big jar 3. fill jar with soapy water 4. have an empty jar ready 5. power foam car & power rinse 6. now use 10-20 cloths a section at-a-time cleaning gently ( for a quick wash skip 6 and 7 ) 7. power rinse 8. spray car with a wet-wax 9. dry with a bunch microfiber cloths - each does 1 pass and into used jar

@claudiadavies5110 3 жыл бұрын

Agree agree agree, car washing is not a pleasure or safer using this method, it became just a big dull drag!

@Brockthedog315 2 жыл бұрын

One bucket for me. I rinse off my wash mitt with my hose during cleaning. Fast and the hose pressure I feel gets rid of enough debris for my use.

@derrickabare9986 3 жыл бұрын

I don't use 2 buckets either and really only 1 or 2 mitts depending on vehicle. Strong pre rinse, apc rinse ,iron removal, clay and then wash . Not much left if anything on the paint after the 1st couple of steps . Been doing this way for 37 yrs . 80% of the time I'll be putting a machine to it anyway so I dont frets about it much .

@clay3544 3 жыл бұрын

Been using this method, but for some reason I still fill a second rinse bucket with water out of habit 🤦🏽‍♂️🤭

@hallamring2036 3 жыл бұрын

Exactly. Thank you. Always power wash before touching a car. Throw six Costco microfibers (cut off the edge of course) in wash bucket and away you go. The key is the power wash. Now yeah if you are washing 20 cars a day this would be a lot of laundry. I don't do that many a day so I would have to see what other solutions people like.

@layzy24 3 жыл бұрын

Love these questions and logic. Go against the norm. Ask why? How come?

@seal010101 3 жыл бұрын

I bought about 7 or 8 wash mitts and only touch the car once with a mitt. I throw them in an empty bucket and then they're washed when I'm done. Wash mitts are cheap, so why not?

@lomasticas893 3 жыл бұрын

I see what your saying but I own nothing but black vehicles and the two bucket method helps me due to soft paint and I also use about 8-10 sponges that work for me . Those wash medias that you say or other people use doesn’t work for my scenario. Thanks for the videos

@jamesamanna5617 3 жыл бұрын

I tried the two buck for its just not worth it. One bucket works for me plus ceramic coating is the way to go i live in fla aka bug paradise. I say what ever works for you. Good video thank you

@danhylands3033 3 жыл бұрын

Genius my thought exactly been doing this for a while now.

@bhcamaro2002 3 жыл бұрын

Safest wash method to reduce light scratches is a clean damp microfiber and fresh soap bucket

@michaelsimonette8943 3 жыл бұрын

Ok now I think 2 buckets would be ok. 1 for the mitts and soapy water. The other to throw the dirty ones in. Great video

@patricktuggles4815 3 жыл бұрын

I use 3. Two buckets with ONR/N914 on one side and one for the wheels lol

@autodetailingpodcast 3 жыл бұрын

Nailed it

@ricardoharewood775 3 жыл бұрын

Except buckets are free and wash mitts are expensive and generally poor quality where I live. There is nothing stopping you from refreshing the water...i use the 'dirty' water for my trees.

@JWL-UK 3 жыл бұрын

Car is coated with Fusso Coat. I just take it twice a week to the coin wash, spray Surfex HD at 5%, wait a couple of minutes, rinse and follow up with a very gentle rinseless wash using BSD (winter) or Done and dusted si edition in the summer. I rinse the MF towel, change it if the car is dirtier than usual (rarely). Takes 20 minutes. The crowd rubbing their cars, using 2 buckets are just creating more work and swirls!

@NPAMike 3 жыл бұрын

I use two buckets, one for wheels and one wash bucket. I just have multiple mitts in my one bucket soaking. Once i use my mitt i move on to the next one. Its much cheaper than buying the 2 bucket dolly.

@whitegoodman7465 4 ай бұрын

If your worried about a dirty rinse bucket or a dirty mitt you completely missed the importance of a pre wash stage which effectively gets 90 percent of the dirt off the vehicle prior to contact wash. Id be more worried about rubbing dirt around the car before you dunk that mitt instead recontamination from the rinse bucket.

@shealaking8557 2 жыл бұрын

The second bucket makes a handy place to throw the used mitts and towels to drag them in for laundering. 😉

@Thrash155 3 жыл бұрын

I must be weird, I don't use a wash bucket at all. I only sometimes just use a rinse bucket. Rinse my Car, Then Foam, use a several clean wash mits (wetted with water) to contact wash. Rinse then dry. Meh. Works for me..

@joshuatester8197 3 жыл бұрын

FACTS The one bucket cycling method is safer, faster, and saves water.

@rxdetailer1424 3 жыл бұрын

Agreed, but still have to clean or wash out all the mitts once done. May use same or = water amount💧 by the end of it. But this method is still safer nonetheless👍

@joshuatester8197 3 жыл бұрын

Wash tool require cleaning following the end of any car wash. You're right though the load would be bigger.

@richardfabrizio8998 3 жыл бұрын

Makes sense

@Spiritcr1jsher 3 жыл бұрын

If your cars paint is properly maintained. Most , if not all , the dirt comes off with just a powerwasher. I can literally hose most dirt off my car and it looks clean with just water

@TheSmithereens80 3 жыл бұрын

I wash this way when doing a rinseless using MF towels but have never even thought about it for a full wash. Thanks for making me feel like an idiot there Jimbo. 😂 A lot more laundry to deal with but worth it to protect if you have spent all that time polishing and coating your car.

@limoman4125 2 жыл бұрын

I think jimbo was being sarcastic about multiple mits in one bucket I been using square bucket with 12 Mits for years!! Pressure wash the Mits off half way thru day

@BKDDY 3 жыл бұрын

This is why I just use 20 new wash mits & never bother with rinsing. EZ

@bunglebush 3 жыл бұрын

Zero buckets! I use the foam cannon to suds the car even after the first soak with suds and rinse. Then I use the foam cannon to suds the part I’m about to contact wash. Then use the pressure washer to rinse the mitt. Zero scratches. The guy who did my ceramic coating a year ago told me what ever I was doing to keep doing it because it looks like I’ve never washed car they are so few scratches on it.