TWO BUCKETS vs ONE BUCKET: What’s the best car wash method?

Рет қаралды 58,579

Күн бұрын

TWO BUCKETS vs ONE BUCKET: What’s the best car wash method? In this video, we discuss the best ways to wash your car in order to have a scratch-free car wash experience. You will get all the tips and tricks for both methods, regardless if you prefer the one bucket or two bucket wash method.
▶️ SUBSCRIBE, SHARE and LIKE today’s video & Turn On Notifications for New Videos - bit.ly/PanTheOrganizer
⬇️🔶 LINKS TO PRODUCTS MENTIONED IN THIS VIDEO ⬇️⬇️
🇺🇸 For people in USA:
Bucket + grit guard: amzn.to/3MpfSqZ
Grit guard: amzn.to/3mr9t3Y
Detail Guardz Dirt Lock bucket filter: amzn.to/3xc0BnN
Dolly for buckets: bit.ly/3mqtB6w
Connector plate for dolly/buckets: bit.ly/3mmQyY6
Bucket organizer (side caddy): bit.ly/3IIEevw
Microfiber chenille wash mitt: amzn.to/3tlIA5s
Microfiber Madness Incredimitt: bit.ly/3xorw18
Microfiber towels: amzn.to/3Q8Xjur
Bilt Hamber snow foam: bit.ly/3mmNBqw
CarPro Lift snow foam: bit.ly/3moyI77
Foam cannon: amzn.to/398MxUn
Pressure washer: amzn.to/3zobfdT
Vyper chair: bit.ly/3tnHztD
🇨🇦 For people in Canada:
Bucket + grit guard: bit.ly/3Nwfuse
Grit guard: bit.ly/3Q1UBH7
Detail Guardz Dirt Lock bucket filter: bit.ly/3tkHHKC
Dolly for buckets: bit.ly/3Q5ZxKO
Connector plate for dolly/buckets: bit.ly/3xaGG8V
Bucket organizer (side caddy): bit.ly/3ObDUa0
Microfiber chenille wash mitt: bit.ly/3azFqnY
Microfiber Madness Incredimitt: bit.ly/3xorw18
Microfiber towels: amzn.to/3aAxumu
Bilt Hamber snow foam: bit.ly/3mmNBqw
CarPro Lift snow foam: bit.ly/3MsMWOQ
Foam cannon: bit.ly/3zo3GnM
Pressure washer: amzn.to/3tl6ONi
Vyper chair: bit.ly/3tnHztD
🇬🇧 For people in the UK:
Bucket: amzn.to/3xpTcmm
Grit guard: amzn.to/39c9So1
Detail Guardz Dirt Lock bucket filter: amzn.to/3azkpdc
Microfiber chenille wash mitt: amzn.to/397wwy0
Microfiber Madness Incredimitt: amzn.to/3MrhnVO
Microfiber towels: amzn.to/3mpK7nm
Bilt Hamber snow foam: amzn.to/3aN2gc4
CarPro Lift snow foam: amzn.to/3NYF0pJ
Foam cannon: amzn.to/3xjPFVw
Pressure washer: amzn.to/3NtVZR7
Vyper chair: bit.ly/3tnHztD
DISCLAIMER: This video and description contain affiliate links, which means that if you click on one of the product links, I’ll receive a small commission on a purchase without additional cost to you. If you do purchase through my affiliate links, thank you so much for your support!
🎶 MUSIC I USE IN MY VIDEOS - Referral link, get a free trial by clicking below!
www.epidemicsound.com/referra...
Watch more of my videos:
✅ How to apply a ceramic or graphene coating: • How to apply a ceramic...
✅ How to wash your car like a pro: • HOW TO WASH YOUR CAR L...
✅ Rinseless car wash method: • How to wash your car w...
✅ The best car detailing products: • 2021 Car Detailing Pro...
✅ Car detailing tools and equipment: • CAR DETAILING EQUIPMEN...
✅ How to wax your car: • HOW TO WAX YOUR CAR !!
Welcome to Pan TheOrganizer, one of the biggest car detailing channels on KZfaq, here to help you with fun and entertaining tutorials, tips, tricks, products and equipment reviews!
👍🏼 Click the like button if you enjoyed the video and share it with your friends and family. Don’t forget to SUBSCRIBE to my channel and activate the notifications (the bell icon) if you want to be notified every time I upload a new video. Welcome to the Pan TheOrganizer family!!
👕 My merchandise store (T-Shirts, hoodies, sweatshirts, and more!): teespring.com/stores/pantheor...
🎥 List of equipment I use to produce my KZfaq videos: • My New 4K Camera Gear!!
📲 Follow Pan TheOrganizer:
Instagram, TikTok, Facebook & Twitter: @pantheorganizer
🌐 Visit my official website: pantheorganizer.com
🎶 Intro music by Hurley Mower
/ hurleymower
#TwoBucketWash #OneBucketWash #detailing #cardetailing #cleaning #pantheorganizer #detailingtutorials #autodetailing

Пікірлер: 728

@PanTheOrganizer 2 жыл бұрын

⬇️🔶 LINKS TO PRODUCTS MENTIONED IN THIS VIDEO ⬇️⬇️ 🇺🇸 For people in USA: Bucket + grit guard: amzn.to/3MpfSqZ Grit guard: amzn.to/3mr9t3Y Detail Guardz Dirt Lock bucket filter: amzn.to/3xc0BnN Dolly for buckets: bit.ly/3mqtB6w Connector plate for dolly/buckets: bit.ly/3mmQyY6 Bucket organizer (side caddy): bit.ly/3IIEevw Microfiber chenille wash mitt: amzn.to/3tlIA5s Microfiber Madness Incredimitt: bit.ly/3xorw18 Microfiber towels: amzn.to/3Q8Xjur Bilt Hamber snow foam: bit.ly/3mmNBqw CarPro Lift snow foam: bit.ly/3moyI77 Foam cannon: amzn.to/398MxUn Pressure washer: amzn.to/3zobfdT Vyper chair: bit.ly/3tnHztD 🇨🇦 For people in Canada: Bucket + grit guard: bit.ly/3Nwfuse Grit guard: bit.ly/3Q1UBH7 Detail Guardz Dirt Lock bucket filter: bit.ly/3tkHHKC Dolly for buckets: bit.ly/3Q5ZxKO Connector plate for dolly/buckets: bit.ly/3xaGG8V Bucket organizer (side caddy): bit.ly/3ObDUa0 Microfiber chenille wash mitt: bit.ly/3azFqnY Microfiber Madness Incredimitt: bit.ly/3xorw18 Microfiber towels: amzn.to/3aAxumu Bilt Hamber snow foam: bit.ly/3mmNBqw CarPro Lift snow foam: bit.ly/3MsMWOQ Foam cannon: bit.ly/3zo3GnM Pressure washer: amzn.to/3tl6ONi Vyper chair: bit.ly/3tnHztD 🇬🇧 For people in the UK: Bucket: amzn.to/3xpTcmm Grit guard: amzn.to/39c9So1 Detail Guardz Dirt Lock bucket filter: amzn.to/3azkpdc Microfiber chenille wash mitt: amzn.to/397wwy0 Microfiber Madness Incredimitt: amzn.to/3MrhnVO Microfiber towels: amzn.to/3mpK7nm Bilt Hamber snow foam: amzn.to/3aN2gc4 CarPro Lift snow foam: amzn.to/3NYF0pJ Foam cannon: amzn.to/3xjPFVw Pressure washer: amzn.to/3NtVZR7 Vyper chair: bit.ly/3tnHztD 🎶 MUSIC I USE IN MY VIDEOS - Referral link, get a free trial by clicking below! www.epidemicsound.com/referral/pjuxkd Watch more of my videos: ✅ How to apply a ceramic or graphene coating: kzfaq.info/get/bejne/qdeBjLmb3azVe2Q.html ✅ How to wash your car like a pro: kzfaq.info/get/bejne/bbGfnZibl6vXZYk.html ✅ Rinseless car wash method: kzfaq.info/get/bejne/pptojJiit8qXf4k.html ✅ The best car detailing products: kzfaq.info/get/bejne/gtF0ZZWGrNvOnas.html ✅ Car detailing tools and equipment: kzfaq.info/get/bejne/d6llodKB267NdZs.html ✅ How to wax your car: kzfaq.info/get/bejne/gcCanLOU2LamonU.html

@johnmachter40 Жыл бұрын

i bought one dirtlock. in which of the two buckets would you recommend putting it in if i own only one dirtlock?

@albertcarr574 11 ай бұрын

Pam, I am so confused, I am going to do the two bucket method, which grit guard would you reccomend? Thank you.😊

@olderface9939 2 жыл бұрын

"Weekend Warrior" -After doing a two-step correction on my car, I've stuck to doing a one bucket wash method, the catch is with fresh foam/soap supplied from my griots foam cannon and high psi+gsm pressure washer. After doing a thorough rinse, chemical presoak for bugs, tar, etc, if necessary, thick foaming, wheels, and another thorough rinse, one bucket with some soap, grit guard, and a single high-quality wash mitt is used. Each panel is individually foamed along with the wash mitt, flipped halfway through the panel, of course moving downwards, and rinsed after each panel is completed, saving lower areas and rear bumper for last. The mitt is then dunked in the bucket, blasted with the pressure washer, then the process is repeated on each panel. I should note the car is coated with Adams advanced graphene coating and washed twice a week with a heavy spray on graphene topper coating (TW) applied. No noticeable new scratches since the paint correction was done using this method on BMW's black sapphire metallic. A bit crazy but it works!!

@brokenSnake Жыл бұрын

Bmws are notorious for cheap clear coat so be careful using too many chemicals. Especially pre-wash.

@Roberto-oi7lm Жыл бұрын

I'm a two bucket guy, but my primary method of avoiding scratches is to avoid rubbing my car. I use a pressure washer to rinse, foam cannon, and rinse. Then, thanks to my Adams Graphine coating which I have because of your excellent videos, I drive the car at the legal speed limit to blow off 95% of the the water. I only dry the door jambs and around the real license plate, near the windshield wipers, and those few spots which trap water. In other words, normally the paint isn't touched at all. These modern ceramic/graphine coatings are truly a wonderful product. The bulk of the car only gets rubbed every three months or so, sometimes less if I don't drive in the rain too much.

@Burtannia 2 жыл бұрын

I use the two bucket method. It seems to be the best balance between safety but also not being too extreme. I still believe that the most important factor is actually a good contactless pre-wash; it doesn't matter how clean your mitt / water is if you're just smearing a thick layer of dirt around the paint that could've been removed before the contact phase.

@curtr.5083 Жыл бұрын

I switched to single bucket about a year ago. From my experience so far, I am getting significantly less wash-induced scratches. A big reason I use this method is because it is easier on my back to work with two buckets instead of three. Conceptually, one bucket makes sense to me because each mitt is 100% clean as opposed to using a rinsed mitt which is about a max of 80% cleaned, and which has the downside of dirtying the soap bucket as well. I have a smaller car (M2) which helps, I foam and pre-rinse, and I only use 8 mitts with each side getting a panel. I use Rag Co. Knobby chenille at $10.50 per 2 mitts. Not too much of an investment, they last while as the work load is spread across mitts.

@chrisbigknowledgegarland6366 2 жыл бұрын

I'm a weekend enthusiast. I use the one bucket during the summer because my cars get dusty more than dirty. Winter months, I use the two bucket method for when it rains. Great video Pam!!

@TheCarDetailingChannel 2 жыл бұрын

The best wash method is simply the one that works best for you and your situation. I always tend to adjust my wash method depending on the condition of the vehicle and what step follows the wash. The intro was entertaining 😅. Thanks Pan

@PanTheOrganizer 2 жыл бұрын

Hhehe glad you enjoyed it!

@troy14roy14 2 жыл бұрын

Exact. A perfect méthod with perfect product and perfect matérial its a waste of time and énergy for pool condition car.

@dekoeneridder2452 2 жыл бұрын

I am a detailing enthusiast and since 2 years i love the on bucket methode. Take about 9 superplush towels. Use about 4 sides of every towel (so not all 8!) And just cut the car up in 36 sections. Never wring out the towels so they are soaking and each side of the towel will only make a 1 way pass. After the pass i dunk the "used" towel in a empty wash bucket and at the end they 9 of them go straight into the washer. This ensures no scrathes (due to the water), no back movement (minimizing making a scratch) and best of all, the water is as clean as it came from the tap. So never ever in the entire process any soil or dirt will be (re)introduced. Love you channel and please keep doing this forever!:)

@nomad509 2 жыл бұрын

Such an important video Pan and I love your emphasis on these methods and how they may be different for your situation. As a weekend warrior I prefer the two bucket method but I am an apartment dweller in an area with hard water so I would rather use distilled water because I do not have a deionized water system yet. Costs have increased because of current times and I had to re-evaluate my approach to cleaning cars and decided to invest in more wash pads for soap washes and more plush towels for rinseless washes using a one bucket and the second bucket for all dirty wash media. My Worx Hydroshot has been such a great tool providing me pressurized water from my own source while keeping costs down under ten dollars per wash.

@SoCal209 2 жыл бұрын

Excellent explanation and an intelligent look at an often "heat-generating" topic. I prefer two-bucket method, but because of SoCal's drought conditions, doing rinseless wash.

@troycarls4839 2 жыл бұрын

I am not a professional but I just love washing and detailing cars. I use the 1 bucket method with many mitts. It just seams to make way more sense. So you have to spend a bit more to get multiple mitts, but if you care that much about your paint you shouldn't be concerned about that. EDIT: I do use a separate bucket for tires. One bucket multiple mitts for the paint. I prewash with a good snow foam prior to this.

@aftermathrestoration.Greece 2 жыл бұрын

I'm transforming from a weekend warrior (for 15 years) to a professional. I use both methods depending on the location of the vehicle, how dirty is the vehicle...etc. when I'm in my garage I use one bucket method and a punch of old microfiber towels/mitts. As you mentioned, both methods work perfectly.

@chrisryan8894 2 жыл бұрын

I use 3 buckets , wash bucket, rinse bucket and a wheel/tire bucket. I also just switched from grit guards to detail guardz dirt locks. Not sure I’ve seen a difference in that really. Just a weekend warrior here , but I like the results I get, and this is what I learned from you Pan👍 when I first began watching your channel ❤️

@dennisrothschild8550 2 жыл бұрын

Hey pan, great break down, I have been converted to the tree bucket system with one for wheels. I do find the using the foam soak first the amount of debris has been also cut down a ton and this lowered the dirt on the panel by the time I get to the hand wash. Thank you again for helping all us weekend guys/ girls out here.

@tt-rs1457 2 ай бұрын

Rothschild ?

@gryphon123456 2 жыл бұрын

I thought this was well established already? Two bucket team!!! 🧐 I even use two mitts … one for upper car and one for lower car. I’d say I’m a weekend warrior/ budding enthusiast.

@aiztoh 2 жыл бұрын

same here!!! budding enthusiasts, planning to build an auto detailing shop, but I have to work for an already built auto detail shop.

@vogash 2 жыл бұрын

Exactly even with two buckets, better to use 2 mits, for upper and second for lower since it is more dirty

@kevinb7058 2 жыл бұрын

Plus one 👍

@OrangeismyNewGreen 2 жыл бұрын

I’m a beginner and I converted a Millside express wagon cart to a car wash cart with 2 buckets ( I have a gravel driveway ) and I use a separate bucket for the tires. Thanks for the tips Pan 🙋🏼‍♂️🙂👍🏻

@PanTheOrganizer 2 жыл бұрын

Thanks for watching!

@Jason-vn5kz 2 жыл бұрын

I live on a gravel road. It is terrible to spend so much time cleaning when one trip down usually gets the tires dirty. We need a solution to keep tires clean. The dust really messes things up too. I am usually not too keen on using a quick detailer on the dust even being fresh.

@jotighe2 2 жыл бұрын

great idea for the radio flyer cart!

@OrangeismyNewGreen Жыл бұрын

@@jotighe2 The Radio Flyer was the original 👍🏻🙋🏼‍♂️

@chuckfink8239 2 жыл бұрын

Great video, Pan! I do the two bucket method when I do a traditional wash. Most of the time, I use ONR with one bucket. The wheels, I use an IK sprayer with brake buster. Car is totally clean. I rarely do a traditional wash anymore.

@davidgeroge9330 2 жыл бұрын

Weekend enthusiast, depending on the dirt level of vehicle have used all these methods. On my personal car I always foam/ rinse before contact wash 1 bucket 2 mitts with guard and second wheel bucket. Saves on time and product. Keep the great content rolling...

@PanTheOrganizer 2 жыл бұрын

Thanks for sharing

@elliotsimpson3591 Күн бұрын

Enthusiast/semi pro here, I use 2-bucket with emphasis on pre-soak & rinse. By the logic of using one side of a MF towel, or one side of a wash mit per panel, the wash mit or towel is already dirty by the time you get to the end of the panel. Furthermore, only the LEADING EDGE of the wash media is collecting dirty (or at least the majority of it). In a perfectly black & white world, you would really need a clean medium for every spot on the car. In practical reality, there is GOING to be some amount of acceptable gunk build up in your wash media, which is why I prefer 2-bucket to rinsing my mit often and using fresh soap after each rinse. Additionally, if the majority of the harmful debris on a car is removed by chemical & rinsing BEFORE contact wash, there's less potential damage during contact wash!

@archiepezek 2 жыл бұрын

I use the one-bucket method with numerous microfiber wash mitts. Much easier and saves the time and trouble of another bucket, water and grit guards. Super video once again Pan.

@PanTheOrganizer 2 жыл бұрын

Thanks for sharing!

@ScottH432 2 жыл бұрын

I use 1 bucket with 1 mitt and I pressure wash the mitt after completing each section. The key factor though is that I use Bilt Hamber Autofoam and I am very meticulous with my pre-wash, 90% of the dirt is removed before the contact wash and Bilt Hamber do the best pre-wash. I have a separate dedicated bucket for cleaning wheels.

@Truckergregg 2 жыл бұрын

1 bucket with 3-5 was mitts. I rinse, foam, rinse and contact wash.

@dvinpeace 2 жыл бұрын

Great video! I'm not doing it professionally anymore so the One bucket with great soap and 5 good mitts for the Mustang & 7 for the SUV , seems to be the best and safest for me! It leaves no question for introducing dirt to the paint... I only do my two vehicles by weekly so , professionally its not economical, but to me it is the safest....

@saviordream 2 жыл бұрын

I've used both methods, and I've settled on the two bucket method (with a third separate bucket for wheels/tires). Just find it easier to manage, and I haven't noticed any marring or swirling in my paint so I'll keep using it.

@indetailcarcaresolutions3770 2 жыл бұрын

As a semi professional detailer I found that unless I hose out the mitt, rinse it then dunk in wash media, the two bucket method left me with two buckets containing both dirt and suds. I use the one bucket method and four mitts if doing one car or five or six microfibre towels if doing multiple cars. I buy towels once a year if necessary and haven’t bought new mitts for a couple of years now. The mitts I use were collected when comparing them to determine the best one so no real over the top expenses. My most expensive mitt was $AUD20. I too wash, dry and check mitts and towels before storing in a dust proof cupboard. Keeps the wash time down.

@willoverkill8461 2 жыл бұрын

Thanks for the video Pan! One bucket here for sure. I often wash the daily with a Montana boarshair wash brush because it's all my back can handle, and I'll rinse it off with the hose before dunking. My one car I try to do better and I'll do one bucket filled with 8 or so microfibre towels, will leave them on the windshield after use and wash that area last but towels are cheap, you can flip them, and I can often use just a gallon or 1.5 gallons of water so I save a lot of water and a LOT of product, whether soap or rinseless solution by not needing 5 gallons in a bucket.

@abramians1 2 жыл бұрын

Great info! I have always used the "double bucket system". However, after watching your video, will try out the "one bucket system" just to see what the experience is like. Thanks again for a great video/content!

@PanTheOrganizer 2 жыл бұрын

Thanks Armen!

@Jason-vn5kz 2 жыл бұрын

Weekend enthusiast - I use one bucket 4 wash mitts plus two for lower panels. I rinse, foam, one mitt per area then set aside and use fresh mitt for each area. Add two lower panel mitts after upper panel mitts are out of bucket. Rinse. Separate bucket for wheel/tire. I use this method because it allows me to use less buckets while reducing chances for contamination. Plus, the prefoam allows for a slicker surface for the contact wash. Thanks for the vid!

@PanTheOrganizer 2 жыл бұрын

You bet!

@smartdetails 2 жыл бұрын

I do the exact same, 2 buckets is to much work, I’m a mobile detailer so I make all my money based on time, I don’t got time to keep moving 2 buckets around.

@berniehf 2 жыл бұрын

Cheer’s Pan! I use a 1 bucket method for no special reason, it just works for me

@michaelbotsko1099 2 жыл бұрын

Always the three bucket w/grit guards. 1 for wheels, 1 wash and 1 rinse. I live on the East side of Lake Michigan where the soil is all sand. I start off with a rinseless wash, rinse, Adams Mega Foam, contact wash, rinse, P&S Bead Maker, leaf blower and towel dry. followed up by Bead Maker on top of my Ceramic coating. I always have sand in the bottom of my rinse bucket in the end. Thanks for all you do.

@279gax 2 жыл бұрын

Excellent video and breakdown of the pros and cons of each method! I am a 3 bucket weekend warrior: 1 bucket for wheels, 1 rinse, and 1 wash. But I have been doing more ONR washes with distilled water and do the 2 bucket method for that. Might be overkill but it works for me. Question for Pan: What is your covering/coating on your garage floor?

@paul6749 2 жыл бұрын

Hi Pan, great video. I had a new car in Sept, and had it detailed within two days of collection (prompted by your new car detailing video!). The paint was machine polished to nigh on perfection. 10 months later after averaging 1-2 washes a month using the one bucket method and the paint still looks fantastic under the swirl finder light. The car is outside 24/7, but is only low mileage. I use Auto Finesse citrus pre-wash and Bilt Hamber snowfoam before each wash (with Adams Car Shampoo) and I think this is key in minimising damaging the paint in the contact wash stage. I did try the two-bucket method but found the constant rinsing and squeezing out of the mit a bit of a faff. And I am not sure that that method guarantees that 100% of the dirt and grit is removed from the mit. Like you say, each method has its pro’s and con’s, but I can understand why business detailers would use the two-bucket method.

@sidneydunston 2 жыл бұрын

I'm a weekend warrior with a GMC Yukon XL. Because of the vehicles height, I need a ladder to reach the higher surfaces. I have two buckets with grit guards but have found the constant up and down on the ladder to be exhausting. I use CG Honeydew snow foam for the contactless wash and follow up with 1 bucket with multiple wash mitts. I have found this saves a huge amount of time and make the experience much more enjoyable. You always provide sage wisdom Pan. I have learned so much from you and your channel.

@PanTheOrganizer 2 жыл бұрын

Thanks I appreciate the kind words!

@thomasandrews7783 2 жыл бұрын

I’ve used both and for me I think the multiple mitts help me go a little faster and I’m confident that I’m avoiding scratching as much a possible. I bought a bunch of chemical guys lime green mitts that help me to detect any dirt on the mitts. Thanks again Pan, no special ops personnel was needed after all!

@PanTheOrganizer 2 жыл бұрын

Hehe thanks Thomas!

@KiranPatel-fk1pg 2 жыл бұрын

Have you try about trying Autofiber flip? They have a deep pile 70/30 version which has four sides and holds its shape unlike a microfiber. Multiple mitts are still ideal but you'd need like 12 mitts to ensure your not spreading around dirt from one panel to the other.

@stevenmiller3330 2 жыл бұрын

I've recently started using three or four microfiber towels like you mentioned. I actually like it the most.

@eamonkelly2792 2 жыл бұрын

Hi Pan, I'm a weekend warrior/enthusiast and have been following you for a long time and I have used both methods but I like the 2 bucket method the best, it's like a few people have said a good pre-wash is the key, thanks for the great advice and tips as always, I hope you and the family have a great weekend

@PanTheOrganizer 2 жыл бұрын

Thanks for sharing! Have a great weekend too Eamon!

@chriss3959 Жыл бұрын

The gloss on your car is off the charts! I'm a rinseless wash person. I have a crew cab full size truck and rarely have any shade. I wash rinseless in garage. Wheels and pre rinse outside. Thanks for the great content!

@PanTheOrganizer Жыл бұрын

Thanks Chris! I appreciate it.

@toomasparn105 2 жыл бұрын

I am weekend enthusiast and I use both methods. Washing with mit is allmost the last part of the washing and before that I rinse the car many times. Prewash, snowfoam wash with rinse and after that the soap wash. Usually the solution in the washing solution stay’s clean and the mit also. Sometimes if the car is allmost clean before the washing then I have done also the one bucket method. No swirls and scratches yet

@NoName-st6zc 2 жыл бұрын

One positive aspect that people tend to forget about the one bucket method, which can be somewhat important or at least convenient in like rather busy car wash parks for example, is time. If you're cleaning your one and only wash mitt for anything from up to 30 - 60 seconds and from anything between 10-20 times during an entire car you're going to take significantly longer than with the one bucket method. On the one bucket method there's obviously no going down and rinsing your butt off and checking the mitt/pad again for 10-20 times each car required. This also makes the one bucket method so much more comfortable for me. Mitt/Pad dirty? Away it goes, on to the next one. Also : when i look at what some people spend on their bucket systems the money argument is gone too. These are just my two cents of course though. Each to their own.

@timl6450 2 жыл бұрын

Enthusiast. I use the one bucket/multiple mitts now. No mitt goes back in the bucket which leaves the wash bucket uncontaminated and no mitt is dunked in dirty water. That said, I used the two bucket for a long time and had no problems with it. As long as the car isn’t crazy dirty and you pay attention to what’s on the mitt, I think it’s just fine. One bucket is probably overkill in most instances, especially for a well kept car. I just use it because I’m an overkill kind of guy.

@CTTH100 2 жыл бұрын

I agree. I use one bucket with 3 mitts. 1 side of mitt for hood, windshield, and front end, other side for roof and rear. Mitts 2 and 3 are for each side of car, one side for top half, other side for lower. I just don't believe reusing that mitt will get all the dirt to settle at bottom before pulling it out.

@harryh6203 2 жыл бұрын

Weekend warrior here, starting to be a detail enthusiast after watching your videos. I started the 2 bucket wash method and a 3rd for the wheel brushes, following your advice! Keep up the great videos! Some long-term product updates would be fantastic as well :)

@PanTheOrganizer 2 жыл бұрын

Thanks Harry! I have tons of long term updates on my channel already. You have 800 videos to go through. ;) But I test hundreds and hundreds of products so it’s not always possible to do long term updates on every single product as just having the vehicle back for a video can be complicated. People have busy lives. Welcome to my channel. You discovered one of the biggest car detailing channels on KZfaq as we surpassed 780,000 subscribers and are getting close to 100 million views! I have been detailing for 25 years and I love to share my knowledge and passion with my viewers. You found the right channel to help you learn everything about detailing.

@harryh6203 2 жыл бұрын

@@PanTheOrganizer you know I've pretty much watched them all haha, or multiple times! I've learnt a lot! A few products would be interesting to see more of, NV car care or Owners Pride products.

@bishopd2290 2 жыл бұрын

WW/DE here. Been using 2 buckets. Will use 2 mitts sometimes. When I see the grit at the bottom of the rinse bucket I’m always glad I used two buckets.

@thinkforyourself5672 2 жыл бұрын

I was using multiple mits and 2 buckets but after I bought that Grit guard pump system I went back to one mit and save the bottom panels for last. That pump grit guard works really well

@PaulDoldenDetails Жыл бұрын

Always been a two bucket man myself three including my wheel bucket all have grit guards in them great video Pan 🙌🏻🇬🇧🙌🏻

@PanTheOrganizer Жыл бұрын

Same here! 👍🏻

@David-Godin 2 жыл бұрын

You are amazing at responding to all of these comments. Great intro and video too. I am an ex-mobile detailer turned weekend warrior and I use neither method and I get it done faster with great results. I have one bucket for my wheel brushes and chemicals. I use super clean 10 to 1 on the bugs, bird droppings and rocker panels, pretreating them first, then foam the car dry and immediately do the wheels and tires. Then rinse it all off and go right into a rinseless wash with my detail guard and big red sponge and then dry. I have tested several ways and found this to get the maximum results in the least amount of time. Keep up the great work Pan

@PanTheOrganizer 2 жыл бұрын

Thanks David! How did you discover my channel ? Welcome to my channel. You discovered one of the biggest car detailing channels on KZfaq as we surpassed 780,000 subscribers and are getting close to 100 million views! I have been detailing for 25 years and I love to share my knowledge and passion with my viewers. You found the right channel to help you learn everything about detailing.

@David-Godin 2 жыл бұрын

@@PanTheOrganizer I have been a sub since you did the pre-rinse or not video. Keep up the good work. We have similar weather here in the Detroit area 😎

@bowieknife 2 жыл бұрын

I'm a weekend enthusiast, and I've been using the two buckets when I first started but now I tend to use just one (soapy water) and rinse the mitt after every panel with a strong stream of water from the hose instead. I find it uses less water. I inspect after every rinse before dunking it back in the soapy solution. And I use two mitts. One for the top half, the other for the bottom half of the car. I'm going to try the ONR method with a sponge after I finish my bottle of Gold Class shampoo. Thanks for your video Pan!

@NickVetter 2 жыл бұрын

I'd buy the onr now. It good to have both options and the onr can be used for lots of things.

@PanTheOrganizer 2 жыл бұрын

Thanks for sharing!

@Newyen6MT 2 жыл бұрын

Same here, I’ve never used the TBM. Just a soap bucket, wash, spray mit down, then dunk back in for soap. It’s hard to move the buckets around since my parking lot where I was has gravel so I can’t roll around buckets.

@bowieknife 2 жыл бұрын

@@Newyen6MT yes I'm also a bit space constraint.

@bowieknife 2 жыл бұрын

@@NickVetter Will do! I'm waiting for The Rag Company to restock their black sponge to save on shipping.

@douglaszylstra6942 2 жыл бұрын

I most frequently use a rinseless wash (ONR) and use one bucket with about six or seven microfiber towels for the wash, using four sides per towel. The wash media never gets dirty as none of the dirty towels ever return to the clean wash media. When I use regular shampoo, I use the same method with multiple wash mits. I can therefore also forgo the use of a grit guard as no dirt ever gets introduced to the bucket. Regarding inspecting the towels/mits, I do this when I'm folding my towels/mits after washing and then store them in a covered plastic box in my garage. That way I know I'm getting clean towels before I wash my cars again.

@willoverkill8461 2 жыл бұрын

This is what I do too. It can use less product too since you only need enough water/product to soak the wash media

@SIat 2 жыл бұрын

Same but I’ll use the towels when using regular soap too. Saves so much time not having to dunk a wash mitt all the time and having 4 sides instead of 2

@thesamsquatch5224 2 жыл бұрын

Its really interesting to see everyone's different methods. Myself I have the ultra black sponge and whether rinseless or soap that's my go too. I do of course have towels with it and I always have the grit guard in the bottom. For me it just goes hand in hand. I do like some dedicated towels for the tires to help touch them up after the brushes. I do like not having to use a drying aid with rinseless but I like being able to have the soap option especially for heavy dirt and contamination. Its really cool to see everyone's methods Rinseless for me one bucket, soap two to three

@PanTheOrganizer 2 жыл бұрын

I agree. It's nice to see all the various methods people use. It boils down to picking a method you like, and enjoy the wash process. As long as you use safe washing and drying methods, it shouldn't really matter what method you use. :)

@SIat 2 жыл бұрын

@@thesamsquatch5224 That black sponge has intrigued me lately. How do you take care of it? I’m assuming it’s not supposed to go through the washing machine so my concern is how do you get all the dirt out?

@piggietruckerjones7545 2 жыл бұрын

Ok I am a huge fan of built hamber auto foam. So I use that on a dry dirty car. Then pressure wash that off. Now car is like 80% clean. Now ONR rinseless with big black spong, 1 bucket with grit guard. Then if I need to straight to clay, or my 1500 drying towel. That's my process. I would love to here your thoughts on it. Thank you for these great videos!

@JacobMichaelCripps 2 жыл бұрын

As a detailer, on my car i use a one bucket method as my car gets washed weekly and waxed with a good carnauba wax, i also snow foam twice to make sure theres no dirt on the car left, i believe it all depends on the car your washing, no matter what theres always going to be a little bit of dirt somewhere, if you really want the best and safest wash, use one bucket with 10 plush microfiber cloths in a soapy bucket and use one for each panel.

@stewartwilson1080 2 жыл бұрын

Thanks Pan! 1x bucket for wheels, snow foam, 2x buckets for wash. Using all GTECHNIQ products. CSU ceramic currently on my vehicle. I find my self washing the car each week in the winter months as it’s my daily driver. In the summer months I do snow foam rinse and dry each week and 2x bucket wash every 3-4 weeks. Q: Do you 2x bucket each wash, each week?

@johnniealbert1975 2 жыл бұрын

I started off using the two buckets method with wash mitts, but I'm starting to Love the rinse less wash method & using several microfiber's towels depending on the size of the vehicle I'm detailing especially during the summertime in Las Vegas. I also use a separate bucket for the wheels & tires.

@marybetheby5184 2 жыл бұрын

Yes!It works with less hassle.

@dlbwhammy 2 жыл бұрын

One bucket with multiple towels over two bucket. Completely eliminates the chance of bringing dirt into the wash bucket

@steveclark2426 2 жыл бұрын

I use 3 buckets, 1 for wheels 2 for washing. I start with wheels as it’s the part I like the least. If the vehicle is not very dirty I will use a rinseless system. I always finish up with a dry aid of some kind. I’m an enthusiast that dabbles with some paying customers. Definitely agree with as long as you use common sense and most importantly have fun! Because of your videos I now confidently wash vehicles and am helping friends learn how to maintain their vehicles.

@woodrax 2 жыл бұрын

I have always used the one bucket method, but I am not a professional. I do it for all the reasons you outlined; I only wash one vehicle per weekend, and like to keep any mitt that touches the vehicles as “fresh” as possible between bucket dunks. Since I am not a professional, all of my mitts, towels, and applicators get washed between each use, and they are inspected for any grime before each use. I also keep my “heavy soil” towels, like wheel and tire or door jam towels separate, so they never touch the external paintwork, and get soaked before going through the washing machine (and in a separate load). I use 5 mitts, 2 drying towels, a car dryer (Master Blaster), one tire applicator, and one round finger applicator per exterior wash

@ShivamNaikGovenkar 2 жыл бұрын

From India , Thanks to Pan, I follow the foam & 2 bucket wash method, I had never cleaned wheels in first place, It grows on to you hence it does make lot of difference. Till now I have upgraded, buckets ,grit guard, wash mitt, foam canon, pressure washer to karcher k2 compact. In the End To be in the cleanest car is the best satisfaction.

@vancity2349 2 жыл бұрын

Cool video. Before starting this video, I was feeling common sense would say two buckets has to be better. But as you said its how you use them...I use 1 only because its easier but started using a grit guard some time ago which I learned from you. I believe that make a huge difference.

@en1254 2 жыл бұрын

I totally agree... To each his own.. I've tried many different methods myself and I always go back to this method... And I agree that inspectiing the wash media and drying towels is very important. I know people who say they foam the vehicle, Rinse and dry..LOL..

@PanTheOrganizer 2 жыл бұрын

There you go! :)

@MartinMartinez-ux8kj 2 жыл бұрын

As a detailing enthusiast I use the bucket wash method because it gives me peace of mind that I’m minimizing contaminants on the contact wash

@dannienhuis6742 2 жыл бұрын

Enthusiast here - two bucket method. The grit guards are a must for me! I see a lot of grit at the bottom of the bucket, glad I didn't reintroduce that grit back on to the car. I drop the wash mitt into the rinse bucket and squeeze it out, then to the wash bucket to refill it for the next panel.

@jergervasi3331 10 ай бұрын

Thanks for another great video! I'm a DIY guy with multiple cars, and I like to keep them clean! Trying out the 2 bucket method today (with a 3rd for wheels!).

@PanTheOrganizer 10 ай бұрын

Welcome to my channel. You discovered one of the biggest car detailing channels on KZfaq as we surpassed 930,000 subscribers and we have over 122 million views! I have been detailing for 26 years and I love to share my knowledge and passion with my viewers. You found the right channel to help you learn everything about detailing.

@mauricetremblay1324 2 жыл бұрын

Weekend warrior. 2 bucket method. And I still use 2-3 mitts. Works for me. I have had more swirls from a brand new delivered than after I condition the surface.

@billmic9039 2 жыл бұрын

Great content PAN. I'm an enthusiast that washes my car 2x or more per week on average. Car is garage kept and rarely sees rain. NEVER snow / ice /salt. One bucket, mit, wheel wooley, tire brush etc. dedicated for wheels and do them first. Process for Body: 1) pressure rinse entire car with just water. 2) Foam car and let it sit while I clean tire bucket and tools used earlier . Usually takes 5 Min. 3) Pressure wash foam off car. 4) Foam car a second time. 5) Using clean Mit and bucket of water, I get mit wet and start just using the foam as my soap / lubricant. Rinse mit in clean water every panel or so. 6) Rinse with pressure washer to remove all soap 7) Add drying aid while pressure rinsing 8) Dry with leaf blower. Keep up the good work!

@PanTheOrganizer 2 жыл бұрын

Thanks Bill!

@JDMJDK 2 жыл бұрын

I’ve been a paid detailer in the past (20+yrs ago) now an enthusiast and helping hand for friends who want to learn or need a service. That being said I use the 2girls one cup method. Seriously though. Foam cannon, body/paint bucket and wheel/tire bucket. Plenty of soap at all times.

@sageblackarts 2 жыл бұрын

Also Japanese made vehicles have super soft paint which requires extra extra care and ensuring the washing and drying media is soft and clean

@michaelbuckwash2412 2 жыл бұрын

Weekend warrior here! Consistently considered a pseudo-professional by friends and family :) I do two bucket method and prefer the idea of applying only clear, non-dirty water and soap to my car… made possible by all the dirty water going into the rinse bucket

@ThePEagle Жыл бұрын

Weekend "warrior" here - I'm with the 2 buckets method as the 1 bucket would require way too many wash mitts to do it. Wahing my car only every couple month and it being a daily driver, I generally go for half a panel before I rinse. Applying that to the one bucket would require 20+ washmitts. Plus my cleaning water generally ends up pretty clean (sure less than the pristine 1 bucket method). However I use several wash mitts, one for the top part of the car, one for the bottom and a dedicated to wheels. Thanks for all the videos, my car is now cleaner than ever and thanks to you, its paint is partially corrected... Just 2/3rd of the car to go !

@manfredodepaz4991 2 жыл бұрын

I do rinseless/waterless car washes weekly and use the single bucket method with several microfiber towels. I use the edgeless ones from the rag company so I don't worry about rolling scratches from the edge seems. Once a month, I do use the 2 bucket method when I use a product with protection in it. I try to maintain my graphene spray coating for as long as I can and the 2 bucket method really help with that.

@haynknight2002 2 жыл бұрын

Came because I always love hearing information coming from you, stayed because of that funny yet accurate intro!!!

@PanTheOrganizer 2 жыл бұрын

Hehe thanks Nicholas! Glad you enjoyed my intro too!

@as680783 2 жыл бұрын

As a semi-pro weekend detailer I've alwayus used the 2-bucket method (three with wheel bucket). However, after trying the one-bucket, several MF towels method, I find it saves me time and water. I've got a huge stock of towels, so the outlay wasn't an issue as it could be for the hobbyist. Personally, I use a minimum of six towels for a small car, and anything up to 12 for saloons and SUVs. Great discussion Pan, Cheers.

@PanTheOrganizer 2 жыл бұрын

Thanks for sharing!

@marybetheby5184 2 жыл бұрын

I tried out the two bucket method and found it to be an unnecessary hassle.I use a bunch of fresh microfiber towels in one bucket and use a towel for two sections before grabbing a new towel.Not dunking a dirty wash tool back into the suds.Like alot of thing in detailing,find out what works best for you.Good vid Pan!😎👍

@geraldbeaulieu9224 2 жыл бұрын

Hi Pan my wife and I started a mobile detailing business last year in the Ottawa Ontario area and we just love your videos very informative and detailed oriented. We enjoy all your tips and tricks that you provide on your videos its added a lot to the are arsenal on the way we perform are detailing. Keep sharing your knowledge with us all and wish you the all the success you deserve.

@PanTheOrganizer 2 жыл бұрын

Welcome to my channel Gerald. You discovered one of the biggest car detailing channels on KZfaq as we surpassed 780,000 subscribers and are getting close to 100 million views! I have been detailing for 25 years and I love to share my knowledge and passion with my viewers. You found the right channel to help you learn everything about detailing. How did you discover my channel by the way? Cheers from Montreal!

@geraldbeaulieu9224 2 жыл бұрын

I started watching KZfaq videos on car detailing and your videos came up . So after watching my first video of yours I was hooked . I just love how you explain how to use these products and along with your tips and tricks makes it easy to understand. By watching your videos it gives me the confidence to slowly get to the next level. Keep making those informative videos there's a lot of people benefiting from your knowledge and experience.👍

@APrawks 2 жыл бұрын

I use one bucket with fresh microfiber. Grab one from the wash bucket, use it and done. Grab another and repeat the process so I'm always washing clean.

@butchc9226 2 жыл бұрын

Weekend warrior here. I use 1 bucket with a grit guard filled with plain water and a capful of ONR just to rinse my mitts after I do a quick power wash the mitt. As for Washing, i foam the car so no need for a wash bucket. I use 2-3 mitts.

@jseichhorn 2 жыл бұрын

I use a hybrid method: two buckets and three mitts. One mitt is dedicated for the flats (hood, trunk, roof), one dedicated for the sides, and one dedicated for the rocker panels. This way the mitts for progressively dirtier parts of the car never see a cleaner part of the car, further reducing the risk for scratches or marring. This method has been working very well for me.

@maryhoffman2547 Жыл бұрын

I'm so glad I found you. I've been detailing as hobby for years,since i was a kid. Your advice and information on products are amazing. Thank you for helping me and others. Taking time to make videos to share your knowledge.

@PanTheOrganizer Жыл бұрын

Thanks Mary! How did you discover my channel by the way? Welcome to my channel. You discovered one of the biggest car detailing channels on KZfaq as we surpassed 845,000 subscribers and 106 million views! I have been detailing for 25 years and I love to share my knowledge and passion with my viewers. You found the right channel to help you learn everything about detailing.

@maryhoffman2547 Жыл бұрын

@Pan The Organizer I was curious about the tornador. I came across your video about both the air and black tornador. I instantly knew you knew what you're talking about. Went to your channel, hit subscribe. Then proceeded to go through all your videos, and my watch later list is massive! I can't wait to learn so much more from you. Mainly, doing it correctly. I can't wait to practice on my vehicles. The swirls drive me nuts! Lol I enjoy headlight restoration as well. I have been dabbling in more. Finding friends with horrible lights. I've done two so far,but I have done my vehicles as well. I love hearing back that they can see critters on the roads now. Thank you again. And for replying back. Very much appreciated.

@PanTheOrganizer Жыл бұрын

Awesome, thank you for the feedback and kind words. Glad to see you are learning a thing or two from my videos. I want to make detailing accessible for everyone to enjoy! :)

@404notfound..... 2 жыл бұрын

Another excellent video!!! Myself I use 2 buckets with grit guards an a 3rd bucket for the wheels. Only high quality microfibre products touch the paint and I always ring out the microfiber wash mit in between the wash solution and the rinse. 🇨🇦

@PanTheOrganizer 2 жыл бұрын

Thanks!

@petercuervo3297 2 жыл бұрын

My cars are garage kept, very little driving, yes I am as obsessed as you are, nothing wrong with that. I think washing options depend on how dirty, and how much contamination you got when you last drove the car. Thank you for producing so many informative videos.

@PanTheOrganizer 2 жыл бұрын

Thanks for sharing!!

@79blustone 2 жыл бұрын

Pan, I think you covered everything here, there's nothing for me to add except that I fully agree. 👍

@PanTheOrganizer 2 жыл бұрын

Thanks! :)

@franklinisaacgobern4723 2 жыл бұрын

I'm a weekend enthusiast and I'm not always on a smooth surface to roll arround buckets so I have to carry them. So I prefer 1 bucket with multiple mitts for the wash. 2nd bucket for wheels and tires but this way I only use one bucket at a time.

@imdeplorable2241 Жыл бұрын

I did the 2-bucket method for a few years. Then, I discovered the 1-bucket method. In my system, I no longer use a wash mitt. I use multiple microfiber towels, one or two per panel. After wiping a panel, I merely throw the towel into a plastic bag to be washed later. I use 10-12 towels per car wash. I only use soft brushes on the wheels. You cannot get all of the brake dust out of a microfiber towel. I no longer wipe-dry my cars after rinsing. I now use an EGO 650 leaf blower to dry my cars. I'll use a microfiber drying towel just in case. I am now buying an electric pressure washer and foam cannon for the future. PAN THE ORGANIZER is one of only three detailers I am subscribed to. Don't need the rest.

@PanTheOrganizer Жыл бұрын

Thanks for the trust you place in my videos! Have a great weekend!

@neilwalker5041 2 жыл бұрын

Pan the intro to this video was your best intro yet! I feel we are both on the same mindset that both methods are equally great and it is just a matter of personal preference. As long as the pre wash it effective the water in the buckets will be clear after the contact wash. This sounds silly but if I’m on a level wash area the two buckets with wheels is my preference. If I am in my driveway which slopes I use one bucket without wheels because it jut rolls away all the time. Thank you for another solid video!

@PanTheOrganizer 2 жыл бұрын

Thanks Neil! Glad you enjoyed the funny intro! :)

@guillermorodriguez5482 2 жыл бұрын

Since I follow your channel 2 buckets method works for me 😀

@warrenalbert7922 2 жыл бұрын

Weekend warrior here. My std is 3 bucket method (soap, rinse and wheels). Then when it is ridiculously hot here in GA, I will do a 2 bucket rinseless wash (Car, wheels) in the garage.

@darrellminx5459 2 жыл бұрын

Great video Pan. You da man.

@PanTheOrganizer 2 жыл бұрын

Thanks Darrell! 👍🏻

@thepuddingclub5288 2 жыл бұрын

I'm a weekend enthusiast. I used to use two buckets but after seeing John's (UK) video, I've switched to just one bucket. My old rinse bucket was always clean so I don't think it's worth the extra effort. I use just one Incredimitt which I rinse between uses. Oh and I always use prewash with a pressure washer.

@MrKumbayah 2 жыл бұрын

I used to use TMB but since I live in an apartment where my wash equipment is kept in a storage room ive switched to rinseless wash with OBM. Much less setup and equipment. I use just 1 ultra black sponge and it works well. I really believe in Mckees or ONR rinseless to encapsulate so the dirt doesnt scratch even with one bucket and sponge. The only thing is if the car is really dirty you need to rinse initially and in between passes.

@jeepinspence 2 жыл бұрын

in my one man shop I use either one bucket rinseless with 4-6 microfibers, or three bucket one rinse, one wash, one wheels all with grit guards. I also always follow up with a drying aid while drying with a quality towel.

@e39lwd 2 жыл бұрын

I'm an enthousiast in terms of detailing. I maintain my own car but also my parents' cars. I got started with the 3 bucket method (shampoo, rinse, wheels) but lately I've been experimenting with Rinseless washes and the single bucket method with a bunch of towels. I like both but I feel I'm more efficient with a single bucket nowadays. When washing my own car I need (I live in an appartment without access to water where my car is) to use a self service car wash (basically only use their water). There I prefer to use a single bucket. At my parents place I can wash on the driveway. There I usually go 3 buckets as I have free flowing water and "the time" to wash without having to think of adding credit to use water. While I enjoy the 3 bucket method I feel like the single bucket method with fresh towels for every section seems like a safer and more efficient way to wash. In the end I kind of like switching it up as both ways have their pro's and cons.

@malig0413 2 жыл бұрын

I use ONR for washing so I use one bucket, but with a good grit guard. I use the black sponge for washing and the gauntlet for towel drying.

@KonstaNykanen 2 жыл бұрын

I consider myself as a detailing enthusiast and a weekend warrior, best of both worlds, right? My preffered washing method is the two bucket method. In my opinion it's the safest way to wash a car and it works the best for me and my needs. One bucket is just for rinsing the mitt and trapping the dirt at the bottom of the bucket, and the second bucket is dedicated for clean wash solution. Stellar work Pan, can't wait for the next upload👌🏻.

@PanTheOrganizer 2 жыл бұрын

Thank you!

@alanphillips4431 2 жыл бұрын

I’m a wheelchair bound weekend warrior. I always start with 2 buckets but my arms usually get tired and I abandon the second. I know it’s sacreligous but if I use a boars hair brush for reach when my arms hurt and then I use both buckets.

@stewartwilson1080 2 жыл бұрын

Bloody legend! Keep it up! 💪🏽

@neilwreyford8900 2 жыл бұрын

Adapting to get the job done.

@jasonferrill6612 2 жыл бұрын

Just the fact your out there doing it is inspiring. I'm sure you have thought about the microfiber on a handle solutions. Not sure if that is a good fit for you or not but I use it sometimes. Keep it up!!!

@alanphillips4431 2 жыл бұрын

@@jasonferrill6612 I have an 8 ft tall transit so I really need a pole that bends in the middle to reach my roof.

@PanTheOrganizer 2 жыл бұрын

Hi Alan. Thanks for sharing, but I also would like to highlight the fact you are not letting your disability (mobility impairment) prevent you from enjoying detailing, and I tip my hat off to you for that. Keep rocking! Welcome to my channel. You discovered one of the biggest car detailing channels on KZfaq as we surpassed 780,000 subscribers and are getting close to 100 million views! I have been detailing for 25 years and I love to share my knowledge and passion with my viewers. You found the right channel to help you learn everything about detailing.

@smartdetails 2 жыл бұрын

I use 1 bucket but 4 different mits, I also got a bucket just to keep all my wheel cleaning supplies in, I detail about 5% of the cars in my city and I have no complaints about swirls or scratches from any of my clients!

@dannydaugherty5702 2 жыл бұрын

I’ve done it both ways but I prefer to use the two bucket method! I also would like to add I use two wash mitts! One for the paint and one for the wheels 🛞 Great job on this video always very informative! I love these videos. Keep up the good work👏

@PanTheOrganizer 2 жыл бұрын

Thanks for sharing!!

@danyel9256 2 жыл бұрын

I am a weekend warrior using the 2 bucket wash method. Learned on KZfaq but agree with the benefits

@Fredl65 Жыл бұрын

Car detailing is my hobby, I am not a professional detailer. Therefore I only use the one bucket method with 8 washing gloves. At home car washing is forbidden, I have to use an official car wash box. I am much faster than using 2 buckets and one wash mitt. For me it's safer (dirt) and it saves unnecessary hassle with people waiting. After use put in the washing machine and back in the bucket (without Dirt Lock), all clean for the next use.

@aiztoh 2 жыл бұрын

I agree!!! So many Car wash here do pressure washer only tho, So I guess they no use buckets. it looks polished clean tho. I plan to work for an already build auto detailing shop just to know how polishing works. and then make my own once I have enough money.

@JD-sc1gt Жыл бұрын

I am definitely in the two bucket camp for the paint and I ALWAYS use a separate third bucket for the wheels. The third bucket for the wheels is a must, in my opinion. When washing the paint, I start at the top and wash down to approximately knee height. Once the car has been completely washed from the top down to knee height, I then wash the remaining lower portion of the car from knee height down. I do this because the lower portion of the car is the dirtiest and I don’t want to introduce that dirt to the less dirty part of the paint. This helps prevent swirls. I also frequently empty and refill my rinse bucket during the wash process so that I am rinsing in clean water. Although I am a weekend warrior, I have taken a professional detailing class and learned this method at the class. My cars continue to look quite good using this method.

@PanTheOrganizer Жыл бұрын

Thanks for sharing!

@jamesyelverton3305 2 жыл бұрын

TY Pan for the vid no matter the opinion your always making us think. Mitts are cheap, one bucket and put used mitts off to side for washing. Use old mitts or another color for lower area where heavy dirts hides. jimmy

@PanTheOrganizer 2 жыл бұрын

It's always good to have healthy and positive discussions about topics in general. As long as people stay civil and share their thoughts and opinions in a courteous manner, I'm all for it. :)

@dontderockmerizz3211 2 жыл бұрын

I use the one bucket method & about 4 wash mitts & Mothers speed wash & wax. I accumulated many mitts over the years so no reason to buy the extra bucket. Works great for me.

@ddautodetailing 2 жыл бұрын

Great video and topic for discussion! I'm just an enthusiast and use the two bucket method. I definitely see pros and cons for both methods.

@PanTheOrganizer 2 жыл бұрын

Well said!

@djmuller2349 2 жыл бұрын

I agree with others. One bucket and tools for tires, inside fender wells (SUV), and undercarriage. Rinse, snow foam, two bucket method. Works great. No worries on the paint or wheels! Thanks Pan!

@PanTheOrganizer 2 жыл бұрын

Thanks for sharing