Overtime 4x4 Tutorial: Manual Hub Conversion
Рет қаралды 3,526
3 жыл бұрынOvertime 4x4 Tutorial: Manual Hub Conversion
Today we are showing you guys how to quickly convert your automatic hubs to manual locking hubs. We are using a 1991 Ford Explorer to showcase how to do it, but this process is similar in most stock automatic hub vehicles.
Vehicle: 1991 Ford Explorer
Parts: Warn 29071 and Warn 32720 (Manual Locking Hubs)
Price: $300 including hubs and required hub tightening socket.
Install Time: 1 hour with a friend
Music by: Kevin Macleod, Scott Holmes, Ben Sound, Audio Nautix and LiQWYD.
@johnnytightlips6407 2 жыл бұрын
Hey nice , could you provide a link to the hubs you got plz.
@bnbader 2 жыл бұрын
Warn 29071 and 32720
@johnnytightlips6407 2 жыл бұрын
@@bnbader thanks bro
@ogseybaby 4 ай бұрын
Hey, my wheel bearings keep coming loose any tips or techniques? Thanks
@overtime4x497 3 ай бұрын
Manual or auto hubs? Pack with a lot of grease and tighten the spindle nut with a little Conrad strength as we say. Could be bad races or keyway not installed correctly. Make sure the bearings are seated correctly. When you rotate the rotor to seat the bearing there should be some resistance/pre-load.
@martingonsalez6635 Жыл бұрын
will this work for a 1994 mazda b4000
@overtime4x497 Жыл бұрын
Yes, as long as it has 4x4 with the Dana 35 front end.
Ranger Shop
Рет қаралды 2,8 М.
TheGarageEngineer
Рет қаралды 38 М.
Gettin' Junk Done
Рет қаралды 117 М.