Gold recovery and refining from 9.5kg BGA chips - black tops smelting. Surprisingly low yield!
Пікірлер: 226
@scrapman502 Жыл бұрын
I have found that BGA chips that come from television boards generally do not have gold in them, they are usually made in China, and the bond wires are made from cheaper metals such as aluminum. If all the BGA's came from Computer motherboards, your yield would increase greatly.
@rohitlkv Жыл бұрын
Yes that is true I had 140 gram bga top part or led tv or LCD tv but I got 450 mg of gold it's so bad result.
@magthemagnificent84372 жыл бұрын
Pretty sure the rest of the gold is in the Slag you spooned off when you first added the lead and silver.
@SocratePrimusSapiens2 жыл бұрын
Hello my friend ! All your gold is in your vitrified slag... I had the same problem a couple of time at the beginning when i did this method instead of "all chemical process". Try this if you mind : On a furnace ( Temperature must be higher than 1200° ). Prepare 1 unit of slag and add twice time soda + 1% sodium hydroxide flex + 1% borax. Start heating till all your mix is red and bubbling. Then add lead and silver ( 80/20). ( Too much lead will not help you.) Time depends on your furnace and weight of alloy but do not get rid of slag ! When pouring the mix, use the tallest mold you have to keep density deposit. ( Let cool down alone.) Your slag must be cleaned... Repeat till all material is proceeded... Do your cupellation with portland cement. Polymer are a shit in pyro-chemical process... Hope this will help you. Regards.
@OwlTech3332 жыл бұрын
Thanks for your advice! I'll revise the slags!
@SollersScrappingandDiving2 жыл бұрын
Interesting, I'm so glad I'm just the woman who tears down the e-waste collecting all the components and others are the ones who refine it, it looks complicated! Trial and error though, all is not lost, you've shown others what can happen and the comments section has given lots of awesome tips 👍
@redbaronrefining53227 ай бұрын
I absolutely love seeing you work over the years and your different methods of recovery etc. the cupellation didn’t make sense years back to me, but seeing it for these larger scale recoveries now makes total sense. I did have a question: Would you be willing to make a video of you taking all your slag, breaking it up into fine particles, and then separating the heavies from the rest and recovering the minor lost metals ? I’d love to see that!
@CanadianTreasureHunter Жыл бұрын
Plastic top BGA's are the best for gold but you get 3 to 5 grams per KG on average, Copper tops are newer made with many metals Copper or alloy bond wires
@andywhite822 жыл бұрын
In my experience Cu topped BGA's yield about 4.4g of Au per Kg Cu BGA tops (bottoms removed), so I would have expected about ~20g of gold. Always enjoy your videos. :)
@scrappydoo78872 жыл бұрын
Should even have been more than that given that there are bga chips without the copper top. Strange
@goldenscrab2 жыл бұрын
The only explanation that came to my mind that the mixture wasn't thin enough due to the high silica content there which worked as an acidic Flux so you needed more basic thinners such as soda ash Check the slag, something is wrong of course, more than 75% of your gold is missed
@tecnogold45894 ай бұрын
Realmente foi perdido bastante ouro ai nesse processo 😢 o método de remover a silica com acido sulfúrico iria te trazer mais retorno parabéns pelo vídeo 👏🏾👏🏾👏🏾
@svenp65042 жыл бұрын
The slag was very thick and also frothing a lot, perhaps the gold was trapped there. I feel like it should have been heated until the frothing stopped to give small particles time to settle. Perhaps a different flux composition for greater liquidity too? Your videos are great!
@tawnihaynie10652 жыл бұрын
So good to be able to learn from you. Please take care and stay safe. 👍👍👍
@francois-pellier2 жыл бұрын
Приветствую! Большой лайк за работу!)
@OwlTech3332 жыл бұрын
Спасибо Олег!
@colonialcharlie87022 жыл бұрын
Hmm sneaky move if those werent sold as heat sink bga's. A mixed lot should be way less copper plates. Or at least i would have to set them aside from others to get that many. When depopulating boards i find alot more of the other type. And as you found out. It's pretty much the majority the weight, Skewing bga estimates. But I also wonder what the slags rechecking will produce. As suggested in the comments.
@jackmclane1826 Жыл бұрын
KZfaq is full of videos of processes with extremely high yielding material, and - I suspect - videos with added gold to make the result look more spectacular and making a bigger headline. BGA chips are hit and miss. You never know.
@chosen1one9302 жыл бұрын
Once you incinerate the chips and remove the copper heat spreaders, you only need to rinse with water several times till most of the black plastic is gone. Some people grind the chips in homemade machines like trinity gold recovery link Isent you not to long ago or they use anything to crush up the thicker pieces of plastic, hammer, coffee can with call bearing etc. Where you're done washing you have a big ball of gold bond wires, silicon chips and and a little bit of other junk.
@jakuborvos15752 жыл бұрын
With BGA´s it´s always a risky operation. If they aren´t some old branded Intel etc. you cannot predict anything. Gold corner also do not assure the yield. From my point of view, incinerated chips passed through the sieve could be very easily washed with water to remove most of the silica fillers and remaining carbon and silicon. The rest is incinerated again to assure no carbon left. And leached with AR. Altough I see you have an established route for processing scrap with pyrometallurgy. Keep doing the good work. And try to smash-grind the piece of slag and pan the powder to see if some gold isn´t lost in it. It doesn´t look very thin, and after incineration, material didn´t look grey, but black. Maybe some carbon in the slag trapped the gold.
@niculanicolaeofficial91142 жыл бұрын
You should get around 1% from 3.4 kilograms, so like 35 grams. I have done 2 kg mixed bga, after removing the botoms and coolers i got only 640 grams tops, boiled in 95% Sulfuric acid, washing with tap water, after clearing, washing with distiled water then ad 50% Nitric/50% distiled watet, after reacțion done, wash, then AR,, denox, precipitate. Your gold shold be stuck or in cupiled lead/silver, or in disolved glass.To disolve the glass you need HF, Hidroflouric acid.
@lockdown7272 жыл бұрын
I find your videos very interesting, thanks for uploading 👍
@OwlTech3332 жыл бұрын
Thanks
@2001pulsar2 жыл бұрын
Great video. Remember new chips have lower gold. I would re process the slag, maybe have a cone mould to gravity separate in cooling, like mbmmllc. Also some borax to thin the slag and allow more metal to sink down.
@charlesspringer4709 Жыл бұрын
And an iron rod? AGrre borax and cone mold. That slag removal looks way to dependent on skill and circumstance. And I could not tell what the cupel method was. I did not see anything added like crushed sea shell powder. Was it all evaporation? And do you breath that?
@toomuchdebt56692 жыл бұрын
Most people who get high yield from BGA chips usually wet or dry ash the chips instead of smelting.
@GoldGil2 жыл бұрын
*processing 1 kilo of BGA*with copper plate recovers *5 gramas* on average, in its process *9.5kls* taking into account only the silica buttons without copper plate calculation from what I saw in the video *2.2kls* of silica buttons *20.2* grams of gold details processing in sulfuric because incinerated and deep there are many losses in the process like my good friend share what I learn
@NanamiKairyu3 ай бұрын
wrong incinerated > lost gold. You still had black coal, it's adsorbent for the gold. And lead smelting is not a good method for non ceramic cpu/chips etc. This material have 10 gr in 1 kg around without copper discs, with them around 8 gr per 1 kg
@MIRAE_GOLD26 күн бұрын
Thank you for the good video.
@sticksstonesandalittlemeta35176 ай бұрын
You have nitric acid should go straight to that to remove base metals and silver then aqua regis for gold and platinum no need that add lead and silver.
@sticksstonesandalittlemeta35176 ай бұрын
10 grams per kilo was never gonna happen
@chosen1one9302 жыл бұрын
If you had all copper topped BGAs this will cut down on the yield because you sawll how much they weigh, this cuts done on bgas per pound compared to someone doing bgas with no copper pieces.
@razaliyusof8861 Жыл бұрын
If there is aluminium in ash.gold will alloy with aliminium and have very high melting point and it will be in the slag.
@scrapingE-wastebyMarsi4 ай бұрын
That is because of weight of heat sinks on top of epoxy and because that BGA gold corn.chips are made after 2005 yr. Collect only made before 2005 yr. after that year is gold plated copper vires. All the best witches for you from Serbia. You have my SUB and LIKE.
@OwlTech3334 ай бұрын
Dobro dosli!
@scrapingE-wastebyMarsi4 ай бұрын
Hvala sve najbolje.@@OwlTech333
@mrgreenswelding28536 ай бұрын
The ones with heat spreader on them don't have much gold in them. Plus you need to crush into fine powder.
@johntimpe83652 жыл бұрын
BGA's ain't the only things with gold in or on them. IC chips, cpu's, rams have gold fingers, many comptuer cards, cable pins, are gold plated. and scan boards on flat screen tv screens have gold plated fingers on them.
@alexandr67512 жыл бұрын
Добрый! Давно и с интересом наблюдаю за Вашим творчеством. По поводу BGA два соображения: На видео black tops видно мельком но из того что видно складывается впечатление, что многие black tops имеют heat sink(металлический колпачек для отвода тепла), а это дополнительный вес. Обычно считают выход по Intel, возможно в Вашей смеси содержание ниже.
@user-yd8jk8dc4u11 ай бұрын
Мыслите в верном направлении. Если верить видео из ютуба и тематическим форумам, то шапки с радиатором содержать 4-5 г золота на 1 кг шапок. Шапки без радиатора 8-10 г/кг. Даже по самым скромным прикидкам (все шапки с радиаторами и содержанием 4г/кг), то получаем 6*4=24 г Au. То есть даже так взяли чуть более 50% от ожидаемого. А так как были шапки и без радиаторов, то потери гораздо больше. Причина в методике извлечения. Я думаю, не нужно было добавлять серебро. Серебро добавляют при квартовании, а это отдельный процесс. А там кто знает...
@keytefirerefining13552 жыл бұрын
It could be because you didn't burn and crush enough. Lot of the gold likely is still sat between that plastic. You gotta grind to a powder
@OwlTech3332 жыл бұрын
I didn't grind the material because all of it is dissolved in the melt anyway, including the silicon dies
@keytefirerefining13552 жыл бұрын
@@OwlTech333 ah ok that's strange then. Never seen a yield like that
@OwlTech3332 жыл бұрын
@@keytefirerefining1355 I would love to find out if anyone has processed this particular type and brand as about 90% of the BGAs were the same.
@keytefirerefining13552 жыл бұрын
@@OwlTech333 ah maybe from the same board. All having copper. That's ashame then. I've had chips wreck my yield a lot. Since then if I have hundreds of the same board I take of 50 or so grams and burn put in water and you should see gold wires sat at bottom.
@OwlTech3332 жыл бұрын
@@keytefirerefining1355 That's a great idea
@shaneyork3002 жыл бұрын
That extra gold is there somewhere. I'd be boiling everything in acids to recover it
@ItaliaMining3 ай бұрын
the smelt was no good you lost a lot in the slag , next time ad the lead when every thing is melted and keep it melted for a cople minutes stiring it
@escrapchannel2 жыл бұрын
Nice video! 🌟 👍 But result is too low for such material. I would revise the slug.
@OwlTech3332 жыл бұрын
Yes I know it doesn't seem right
@NOFX08902 жыл бұрын
Great vid OwlTech. Please let us know if you find some gold in the slag.
@OwlTech3332 жыл бұрын
Thank you! Will do!
@hakkadavet60192 жыл бұрын
Hello, how are the via brands in the gold ratio, how much is it about in 1 kilo?
@OwlTech3332 жыл бұрын
never tested
@noone8139 Жыл бұрын
why i feel like you've lost some gold in the early processing 🤔
@OwlTech333 Жыл бұрын
Maybe because you’re right
@stevennolan26752 жыл бұрын
Maybe some smarty pants figured out which bga's were lower yield and sold them off ? Hope you find more values without much hassle 🙏
@OwlTech3332 жыл бұрын
I think this is exactly what happened, but I have to double-check
@ameerabdalrahman23082 жыл бұрын
good job and fantastic video? can you tel me the chemical composition of sulfamic acid, please? thank you so much.
@OwlTech3332 жыл бұрын
H3NSO3
@mahmmud9802 жыл бұрын
The gold is present in the slag of casting and slag, re-cast both of the slag again, and re-slag it, you will find the lost
@mahmmud9802 жыл бұрын
And another note, you did not burn well or grind well, and this is the most important cause of loss, and the correct ratio is from 40 to 50 grams.
@giorgosxyrichis36302 жыл бұрын
You chould use aqua regia nice vid ❤ P.s. some of bga mayde they have copper bont wires !?
@OwlTech3332 жыл бұрын
I panned a pinch sample of the ashes alot of red wires, thick ones
@giorgosxyrichis36302 жыл бұрын
@@OwlTech333Ou sh..t ..at list we saw a good video with smelting technic ... And a very good lesson for all small or big scale refiners to don't expect the top gold ...
@OwlTech3332 жыл бұрын
Yes live and learn as they say, next time I'll do a test on BGAs with established yield
@ba-uy7ft8 ай бұрын
bonjour, n'oubliez pas qu'il a des composants électronique de contre façon ou faux et ne mette pas or ou un peut par rapport aux originaux. Bonne chance pour la suite
@brianterifay6793 Жыл бұрын
You only really had 2.9KG of material, and to get 12 grams is not too bad. You have to take in consideration that weight of the heat sinks is not workable material. Thanks for showing us to avoid them heat sink toped BGA's, you're better off selling them.
@wiltonjosegoulartgaravelli7925 Жыл бұрын
Essa diferença é devido a ouro 18k para ouro 24k, acredite, purificou muito bem... ❤️❤️❤️👍👍👍👏👏👏😊😊😊
@tinsoffish18102 жыл бұрын
If the seller has an xrf gun...toss the low yield in the resell pile...repeat. like the guys that sell a bag of magnetic mlcc ...
@JoSeeFuss2 жыл бұрын
Where do I find scrap eastern european capacitors and chips. Also, why not use a cone fixture to pour the entire run into. Let gravity do the work.
@OwlTech3332 жыл бұрын
I haven't made one yet, but it's on my checklist
@JoSeeFuss2 жыл бұрын
The pyramid shaped cone is the way to go for sure. No messing around, melt your lot, pour it in, let it cool. Just remember that your salg may still have some recoverable material, save it up and run it again at some later date
@colincrane48352 жыл бұрын
Yes BGA’s are funny buggers. Did a load in sulphuric boil, and was not impressed with result. I always separate the metal cap ones as well more modern ones are overrated.
@chosen1one9302 жыл бұрын
Copper topped chips will always yield WAY LESS because of the weight, we could see another 2000 plus grams of copper alone in his
@juaribeachum40302 ай бұрын
The gold is in the slag
@pepapepa1849 Жыл бұрын
Your BGA can be sold for 1363 euros. How much is your gold worth?
@OwlTech333 Жыл бұрын
Not much
@chosen1one9302 жыл бұрын
BGAs will always vary, the bigger the chips the lower the yield, especially copper top BGAs. Ive seen crazy yields with smaller BGAs they use as memory but on GPUs or on other boards that aren't memory. No set yield with these unfortunately
@anibalquintana8850 Жыл бұрын
Espectacular desde Sud America Paraguay saludos y muy agaradesido por mostrar estos videos
@ivsongold322 Жыл бұрын
Muito bom meu amigo parabéns 👏🏾👏🏾👍🏾
@Zx_Wizard2 жыл бұрын
Отличная работа, брат!
@SavageCouture10 ай бұрын
I imagine you scraped away a decent amount on your “cupellation” it’d probably be better to use Portland cement or a bone ash crucible
@OwlTech33310 ай бұрын
If there is a problem with the process it’s in the smelting, rather than the cupellation
@GitMunny12 жыл бұрын
What type of alloy sheet metal are you cupelling on?
@OwlTech3332 жыл бұрын
Stainless steel
@scrappydoo78872 жыл бұрын
Was this 10kg including the green fibre bases?
@OwlTech3332 жыл бұрын
Yes
@scrappydoo78872 жыл бұрын
@@OwlTech333 that's a lot of weight to lose my friend. When I have seen yield results for gold corner bga chips it has always been without copper tops and no fibre bases. The result you have is basically the a 2.6kg recovery. It's sad that people mess with buyers like that
@OwlTech3332 жыл бұрын
It's not lost, the question is: was it there to begin with. I keep all my slags until the job is done.
@scrappydoo78872 жыл бұрын
@@OwlTech333 in my experience I have never had gold corner bga chips yield this badly. Something I will say though is there has been a rise in fake components supplied for ewaste. I've seen CPUs and some other chips that have nothing Inside them
@MiguelSierra2 жыл бұрын
Excelente.
@steveib8118 Жыл бұрын
Total bummer. Did u ever figure out what happened? Either way interesting.
@OwlTech333 Жыл бұрын
Not yet but I'm inclined to tink that most of the BGAs had copper bonding wires
@hulkkkk Жыл бұрын
Thank you
@OwlTech333 Жыл бұрын
You're welcome
@rightvideos5057 Жыл бұрын
It is necessary to add silver ??
@OwlTech333 Жыл бұрын
yes
@davidrose14552 жыл бұрын
Where do you go about getting this amount of e waste? Been looking ages for a reliable source for CPU’s but Im not sure if the people messaging me are scammers or not
@OwlTech3332 жыл бұрын
there's no such thing as a reliable source, and yes most of the times people selling e-waste are either scammers or they sell it for a price which leaves you no room for profit
@juaribeachum40302 ай бұрын
You should have milled and panned then recover
@whatwill18122 жыл бұрын
What is H90 red flat capacitors?? Removed from old ussr redio
@OwlTech3332 жыл бұрын
silver
@whatwill18122 жыл бұрын
@@OwlTech333 thank you..what about white metal transistor ?
@OwlTech3332 жыл бұрын
@@whatwill1812 some have gold under the cap
@alizain81062 жыл бұрын
The best way to get gold from this stuff is using sulfuric acid not burning
@nick66502 жыл бұрын
i think u got the wrong bga those ones got tin copper tops they low grade bga the one that have the 10grams on top and 3 grams of gold for the bottom part on the are the full black top ones with no tin copper on top and not those ones cheers
@alexandresoares90652 жыл бұрын
Congrats on the content. I believe it must have gold in its vitrified slag. In the convection movement, some concentrated points may have been pushed up, remaining in the vitrified slag.
@youngk24952 жыл бұрын
good job
@ambalapetlover7904 Жыл бұрын
I think this is low grade vga chips Use in modern electronics They contain silver bond wire
@DR_SOLO Жыл бұрын
You might want to check your Crucible or your melting dish
@willb309 Жыл бұрын
Omg these bga must be crap there putting copper/aluminium bond wires in instead of gold surely 😟
@OwlTech333 Жыл бұрын
That’s what I’m thinking
@neilgraham76202 жыл бұрын
I'm just voicing my opinion here but it looks like you needed to incinerate and grind the resulting bgas better. I always grind to a powder fine enough to pass through a flour sifter.
@OwlTech3332 жыл бұрын
Thanks! That's what this section is for! I'm leaning something from each comment!
@neilgraham76202 жыл бұрын
@@OwlTech333 it's funny because I have watched several of your videos and feel like I learn new approaches to things by watching you, I never would have thought I might have something to say that might help you
@OwlTech3332 жыл бұрын
@@neilgraham7620 it's a two-way process: by teaching you will learn, and by learning you will teach.
@user-je2yg3om8n2 жыл бұрын
And what about 200g silver?
@OwlTech3332 жыл бұрын
The silver was recovered and refined
@mihailsemenov39372 жыл бұрын
При всех расходникам , я не поверю в потери в 30 с огромным хвостиком грамм на 9 кило материала ! Даже если бы я лично не пропускал этот материал через руки , то голову бы все равно включил , такие мосты за кило давали скупки по цене 1.5 грамма голды по бирже ! Если бы в них не было того веса о котором сказал , а показанно то что на видео , не один здравомыслящий себе в убыток работать не будет !!! Куда " испарился " большооой хвост рыжика , большой вопрос !!!
@tinsoffish18102 жыл бұрын
Wait!.....have you stripped your country clean of all the high grade stuff?🤪
@danielpersson74832 жыл бұрын
The ones with the cap contains 0 gold
@rightvideos50572 жыл бұрын
Are you using charcoal
@OwlTech3332 жыл бұрын
Coke
@MrAllan92 жыл бұрын
Their not worth the trouble for the expenses involved. Like changing 4 quarters for a dollar.
@mariakoamigo73022 жыл бұрын
Gracias. Muy buen video perooooo.... Esta vez te has dejado oro por el camino. Saludos
@mattbeckmann1928 Жыл бұрын
You probably got the rest of your gold in the rest of that material you separated it out That's I processed electronic scrap before and if you don't pay attention to the stuff you think you're separating out you end up losing so that's probably where it went and it's just too much work you mess with it only thing I ever refined now is carrot gold jewelry scrap
@elbeyiasan23872 жыл бұрын
I've done so much, it's impossible, check out the ruins, we love you, we're looking forward to your videos
@watercraft58292 жыл бұрын
It is very interesting, it should not come out so little, I think you have lost as a result of your wrong transaction.
@sherifaly10172 жыл бұрын
must continue 8 ore 10 g per k .. what happened with you!!!
@OwlTech3332 жыл бұрын
I don't know!?
@mihailsemenov39372 жыл бұрын
В чипах с радиаторами никогда не было 9 грамм на 1 кг и рассчитывать на вес в 90 с копейками это обсурд . А вот 5-6 гр на 1 кило это реально . Видео монтированно , и что где и куда не известно ушло . Обвинять не в чем не буду . Но уловок много , где оно может " улетучится " . Так как и при осаждении , залил осадитель , что выпало в первые минуты показал а отстойник который полон есчё не осажденной взвеси испарился . Здесь все возможно ! Это Ютуб ! Но кто то кого то очень хорошо нае.ал !!!
@prospectorpete2 жыл бұрын
I dont know why all your videos have smelting. Since you ended up doing a nitric bath anyway, you could have just put the ashes into nitric like its meant to be done. And then aqua regia. You didn't need to waste time with all the smelting process
@OwlTech3332 жыл бұрын
You haven't seen All my videos judging from your comment. I'm using far less nitric acid to dissolve gold alloyed with silver than dissolving copper wires.
@prospectorpete2 жыл бұрын
@@OwlTech333 oh ok. Nice
@F8690G2 жыл бұрын
Надо было золу сразу в царской, даже из самые бедные мосты должно получиться не менее 25-30гр с такой количество.
@user-ln3bx6wn8o3 ай бұрын
اي حوامض تحايد النتريك في الماء الملكي السلافاميك
@OwlTech3333 ай бұрын
Sulfamic acid or formic acid
@derrecycler2184 Жыл бұрын
Das sieht mehr nach Spielerei aus, als nach Goldrückgewinnung.
@dimabotezat6719 Жыл бұрын
Привет. Скажи как снимать посеребрение с резисторов . Меланжом очень ядовито. Резисторы новые около 250 кг. Ножки посеребренные.
@user-sd1ur4bn2r Жыл бұрын
Электролизом в сульфите натрия или смывками
@Nik75MiR Жыл бұрын
Респект 🔥🔨😎👍 отлично снимаешь 💥📽️☀️📸🚩🌐👻
@miltondamiao65402 жыл бұрын
Muito bom,gostei.
@dsdsa45302 жыл бұрын
intel and sis brands are the best
@OwlTech3332 жыл бұрын
I totally agree!
@sniffinjoe71402 жыл бұрын
A very good video of how not to do it 😢 You should avoid the ones with the huge round heat sinks they are very bad mainly copper weight very little gold.
@OwlTech3332 жыл бұрын
Thanks it wasn't my choice which ones to pick, and even if it was I still would have picked the wrong ones probably! This entirely new type of scrap to me 😁
@fuhk2 жыл бұрын
@@OwlTech333 New to you?! I would have thought you’ve seen and done it all.
@OwlTech3332 жыл бұрын
@@fuhk haha far far away from it, you'll be surprised how little I know
@fuhk2 жыл бұрын
@@OwlTech333 surprised I am.
@TheFrog7672 жыл бұрын
I hope you get better results next time gold a powerful drug
@OwlTech3332 жыл бұрын
I hope so too
@DWM864 Жыл бұрын
you was specting 10g/kg are you crazy
@OwlTech333 Жыл бұрын
Before I started, yes
@varlov55232 жыл бұрын
добрый вечер Ув. Сова😊
@prospectorpete Жыл бұрын
Why is smelting the only method you know ?. You could have just treated the ashes in acids and you would have recovered lots of gold
@OwlTech333 Жыл бұрын
How can you recover something if it was not there on the first place
@OwlTech333 Жыл бұрын
Only?
@tortugakourosh68052 жыл бұрын
Bonjour comme toujours 💗
@OwlTech3332 жыл бұрын
merci beaucoup pour votre soutien continu tout au long des années