How to Improve Your Mesh in Ansys Workbench

Рет қаралды 37,177

3 жыл бұрын

In this video some tips and tricks on how to achieve a better mesh.
#Ozen #FEA #CFD #Digital_Twin #Consulting #Electromagnetic #Batteries #Simulation #webinar #ANSYS #LSDYNA #FLUENT #ThermalAnalyis #BGA #Dynamics #Low_Frequancy #High_Frequency #ThingWorx #LSDYNA #Electric_Motor #Cloud #Solutions #Chemkin #updates #Electronics #SpaceClaim #CAD #HFSS #Maxwell #IOT #IIOT #Fracture_Mechanics #Solder_Joint_Reliability #AIM #Acoustics #Sotware #Robust
Contact us at:
www.ozeninc.com
(408) 732-4665
Info - info@ozeninc.com
Training - training@ozeninc.com
Sales - sales@ozeninc.com

Пікірлер: 23

@dobbyfree8814 9 күн бұрын

Graduate student from Taiwan, MUCH appreciated!

@wsade1 2 жыл бұрын

Great tutorial 💪

@irfaniskandar4825 3 жыл бұрын

Thanks a lot.

@hadiseyedhosseini5683 Жыл бұрын

Have you considered using IsoGeometric analysis?

@juliaikajohan2011 2 жыл бұрын

how do you cut the body into many part?

@MrAmoslemi 2 жыл бұрын

Why didn't you use multizone method to do the part decompositioning automatically?

@aliabedi3140 3 ай бұрын

Thanks for the Video However, to the best of my knowledge, the element through the thickness are better to be more than two elements or 3 nodes for more accurate results. Moreover, the cutting will bring the contacts to the solution equations and may consume more system recourses.

@user-qg3hm5fo1t 2 жыл бұрын

how about the Node continuous??

@gregsaiter3768 2 жыл бұрын

I am just getting into the particulars of meshiing. General question: How much improvement in accuracy would you say is gained from going to the basic automatic meshing to this improvement? Thanks

@c3ramics Жыл бұрын

I don't have a figure but it can be substantial. A way to figure it out, regardless of meshing is to try a convergence study.

@lofibeats1609 6 ай бұрын

hello sir , myself Roopal Singh from Bhopal, i am working on a deign for my MTech thesis or the design has been designed in ANSYS or done simulation but my meshing is getting error , i am following the meshing criteria and from the meshing criteria my meshing is not proper . is it there any formula or any numerical thing to calculate the element size of meshing so please help me

@izwanahmad475 Жыл бұрын

Do you need to specify shared topology in SpaceClaim after you divide the body into several bodies?

@OzenEngineeringSimulation Жыл бұрын

Yes, if you want to have conformal mesh. No if this is not needed.

@realkanavdhawan 3 жыл бұрын

You put 5 sweep division for bolt holes and the flange has 2 divisions, then it will lead to hanging node inside, wouldn't that lead to some simulation error or is it okay to have hanging nodes..

@markevans370 2 жыл бұрын

He doesn't mention this but he is utilizing contacts between the various bodies because of the hanging nodes which is not ideal.

@gauravborude7619 2 жыл бұрын

Can you please make video on oil flow analysis of a two stage reduction gearbox and as well as how to do a full assembly analysis or stackup analysis of a two stage reduction gearbox in Ansys workbench I am a student and need help in it