P790 Upgrade - how to make a spinner shaft.

No video

P790 Upgrade - how to make a spinner shaft.

Рет қаралды 15,621

Күн бұрын

after a custom fitting we are upgrading a set of Taylormade P790 irons with Nippon Modus 120 shafts. We are also making a set of spinner shafts for the vokey wedges provided by the customer. Watch as we take you through the golf club making process to upgrade a set of golf clubs. Learn what and how to make a spinner shaft for your golfers.

Пікірлер: 43

@charlesbartholomew2910 2 жыл бұрын

Excellent video Jim! A couple more fingers of your favorite Scotch and you should start feeling better. 😅Thanks for sticking it out, even when we know you are not feeling well.

@shellyad100 Жыл бұрын

Good vid Jim really enjoyed it...

@lindseynikifor3029 2 жыл бұрын

Could use a guy like you by me. Digs into the details and cares about every aspect of the job, Possibly more so then the client. Love it.

@deepee1544 2 жыл бұрын

I really enjoy your videos and learn a lot. You are a good teacher.

@KentnDebi 2 жыл бұрын

I still have some of the original Spinner shafts in wedges here Jim 👍 I didn't know the 8iron stuff though, thank you for sharing that.

@mattcoulson1560 2 жыл бұрын

Great video Jim - I've got some wedges to rebuild and the spinner shaft info was interesting, thanks. I hope you're feeling better soon! :) Cheers

@ryanrichardson9915 2 жыл бұрын

The DG Spinner wedge shafts have a really funky step pattern as well up towards the mid/high portion of the shaft.

@slickharp 2 жыл бұрын

Awesome info, Jim!

@McGolf 2 жыл бұрын

Glad it was helpful!

@acemanNL 2 жыл бұрын

Great explanation!!! Thx!!!

@Par2Pixel 3 ай бұрын

When you are building a set does frequency matching cost extra or is that just part of building the set? Also when you take a set to say golf Galaxy or any other store that does repair do they mess with this and swingweight at all when they reshaft or do thay just put the shaft in? Thanks for all the great videos I am still learning

@jamiecarlisle7281 2 жыл бұрын

is that a golf ball mark in the door behind you..lol..sorry that's all i see while you talk..love the details of service

@davidnarain8783 Жыл бұрын

How did you know the 790s were to light & stiff for him? I’m struggling with the concept that my current clubs maybe too light and too flexible for me. How can I be sure?

@theimpaler5034 2 жыл бұрын

First time I hear about this couldn't u use S/L irion wedgers to give you the same result higher ball flight /softer landing

@letholforce663 2 жыл бұрын

This is an off topic questions but I figured you would be the one to ask. I just got a new Ping G425 driver and while at the range I put the club back in my bag with the head cover off as I was mid session. Well I had one of my alignment sticks in there and it put a light scratch across the head from about midway out towards the toe. It is slightly visible after wiping it off with my wet towel. With the mat black finish, is there anything I can do that can work that scratch out without sanding the entire top of the club? I was thinking of using a brown paper bag as a buffing process. I don't have a buffing wheel. Any advise would be greatly apricated.

@billblessing Жыл бұрын

Jim, I just heard about "spinner" shafts a couple days ago, then I found your video. Do you use the 8i tip trim in the stronger flex for all the wedges (butt trim for length) or do you use the 8i shaft in the Gw, then 9i in the Sw, etc.? That's something that I'm not sure about. Love your videos!

@Ballzo916 Жыл бұрын

From what I understand, you would or could use that 8 iron in all of your wedges assuming you are looking for more spin. What you suggest is already the case, The 9i shaft will probably already be in your sw and lw as the 9i shaft is the one that goes in 9-lw typically. For me, I'm think about trying this my set might look like s300 3-P, then in my 3 wedges, x100 8i shaft butt trim to wedge length. Anyone correct me if I'm wrong as I've not tried it and always only played s200, s300 and s400 wedge shafts in my wedges. I'm still researching it too.

@sunpark4254 Жыл бұрын

Which graphite shaft iron for senior 2019 p790

@keithstarnicky6993 2 жыл бұрын

How is an 8i in X-Stiff SOFTER than the a 9i/W shaft in Stiff? An 8i in a wedge is considered one soft step as most taper tips for wedges start at 9i. From everything I heard/was told, it requires THREE soft steps to reduce the flex one full flex. Isn't what you are doing called Tiger Stepping? If you want a slight softer and heavier shaft, wouldn't you want a Modus 130 8i in Stiff instead? This would give a heavier shaft, as well as be soft stepped once. I very well might be wrong here, so please set the record straight.

@christaylor2574 2 жыл бұрын

Great content mr mcgolf. How could I possibly get my hands on one of those rifle relic calculators lol

@McGolf 2 жыл бұрын

I dunno, the folks a true temper may have some or another long shot might be the guys at swing science.

@roberttudor455 Жыл бұрын

Aren't the hollow heads filled with a polymer ?? i would be worried it would melt with all that heat ....

@McGolf Жыл бұрын

Speed foam i think they call it. As long as the heat is directed toward the hosel and in quick spurts the wont be an issue

@Bob-hq5lj 2 жыл бұрын

Does the customer get a copy of the build sheet?

@McGolf 2 жыл бұрын

Typically I don’t however some have asked and we provide no problem

@sjdavies47 2 жыл бұрын

What is the impact of using the 8 iron shaft in the same flex/shaft in your wedges?

@McGolf 2 жыл бұрын

Softer feel with potential of losing consistency

@JaxReds 2 жыл бұрын

If I’m already playing an X flex in my iron shaft how would I do my spinner shafts?

@MichaelShinosky 2 жыл бұрын

Just soft step the x flex. So use an 8 iron shaft in wedge.

@habitualflipper5640 Жыл бұрын

@@MichaelShinosky You're misunderstanding the objective. To create a spinner shaft, you use the next flex up 8iron shaft. If you are x100 in irons, use an 8 iron x7 shaft in your wedges. The purpose is to create a stiffer shaft in your wedges that follows a smooth progression of flex in your irons.

@dandumm4319 Жыл бұрын

Are P790 good clubs. Bought them last week and hearing the face of others are caving in and also people are seeing pin holes.

@tjmoore8493 2 жыл бұрын

guess im screwed if I already use 7.0 LS's or fit into X7's

@MichaelShinosky 2 жыл бұрын

Tiger plays x100 in irons and s400 tipped in wedges. Just go down a flex or soft step the current flex you use in irons.

@tjmoore8493 2 жыл бұрын

@@MichaelShinosky I understand that's what Tiger does but that is not what Jim mentioned to do, Head to (13:56) and you will understand why I said what I did. Either go up a flex in the 8 iron shaft to create a spinner shaft that weighs the same as your irons or if you have an aggressive transition to go up in both weight class and flex if you desire a slightly heavier club.

@MichaelShinosky 2 жыл бұрын

@@tjmoore8493 All a spinner is a more active tip section by soft stepping. I'm pretty sure using an 8 iron in the same flex as irons will have the same results.

@MichaelShinosky 2 жыл бұрын

@@tjmoore8493 And I understand what you are saying about 7.0s and x7s. You're subtly bragging about your swing speed. Whatever.... Get the LA Golf rebar 8 shaft then.

@tjmoore8493 2 жыл бұрын

@@MichaelShinosky if it comes across that why it was not intended. More of a cry for help as I have been searching for the right shaft for my wedges for a long time now and have tried what you mentioned previous with a little success and would love to try what Jim mentioned going up a flex in the 8 iron. I'll look into the LA Golf Rebar 8 shaft

@FBRR2 2 жыл бұрын

You have a hole in your door? :)

@McGolf 2 жыл бұрын

Yup five iron broke and lodge in the door

@user-di9cp2ez1l 6 ай бұрын

Vokeys used to be beautiful. Why do all wedge manufacturers stamp bounce on clubs? Only possible utility of such a thing is if You own or carry more than 1 wedge of, let's say, 56 degrees. I'll stick with Japanese wedges, none of which have succumbed to this stamped bounce nonsense. All US manufacturers march in lock step