HEY BOY! Hope you have a good lock on that truck BOY!
@alfonsogtafoya23324 ай бұрын
The storage boxes worth more than the van 😬😂
@replumb4 ай бұрын
Not until it hits 250k miles lol
@krazykkarl4 ай бұрын
They were until Amazon bought up every available Sprinter for their deliveries and drove up the price!
@alaska794 ай бұрын
You see where Penske van lines are selling their old 4+ yr old Sprinters with 250K for $44K. That's just crazy.
@noalbloqueogenocida76293 ай бұрын
You should see mine I have 36 boxes in it
@RonNshar817.3 ай бұрын
Such a great build out
@dcf4764 ай бұрын
Rivnuts are one of the best inventions!
@johnholden95424 ай бұрын
Plumber and carpenter…..NICE!
@Niko-ui9xi3 ай бұрын
AND YET AGAIN ANOTHER BANGER MY GUY PLAYS!!! You sir have fine taste in music
@nicholasphillips54064 ай бұрын
Clean stuff bro. I’m an apprentice and would love to have that level of organization in the vans I’m told to grab stuff out of 😂
@ojsautodetailing11193 ай бұрын
I know your pain on that lol I was a labor for this pipe company called Poole & kent and the lay down area was crazy lol until I organized the tools etc
@mikewaldroup34264 ай бұрын
Back in the day for us hi tech was burlap sacks. After that it was cardboard boxes and a crayon to write what was in the boxes. You got it happenin for you plumber dude. Enjoy the ride while you’re still young.
@frankgeorgeo85824 ай бұрын
This is a little better than my van piled up to my eyeballs with tools and supplies.
@nicholasphillips54064 ай бұрын
Like the use of rivnuts 👍👌
@replumb4 ай бұрын
Thank you! Cheers!
@Christopher-li7uc4 ай бұрын
The tools you young guys have these days I'm jealous
@scarecrow14903 ай бұрын
Im sure you thought about it already, but they got some strut feet you could put at the end of the strut support so it doesnt dig into the mat over time. Nice set up and congrats on your coming up.
@joshnolastname4074 ай бұрын
Errrrrrrrrr there was more space behind the boxes😂
@shannonakey84363 ай бұрын
I enjoy your videos thank you. The voice overs are amazing and that van set up is on point.
@docrofo25733 ай бұрын
I have to say, this is the kind of extra content that I look for…that and hush puppy reviews
@Thracianbeatscrixus4 ай бұрын
Good work. Should add some diagonal bracing on those verticle supports
@MrBoomBlops4 ай бұрын
Damn I hope this truck is well secured
@replumb4 ай бұрын
It is
@dragonskinner90424 ай бұрын
I drive a van a little larger than this with shelving that is probably half as secured. Been driving it since2017 with 0 issues. Our boy is secured.
@4Thug2Life04 ай бұрын
@@dragonskinner9042the og commenter means secure from theft.
@chrisfisichella76654 ай бұрын
Excellent job!! Happy plumbing!!
@willallen74354 ай бұрын
Nice van! I need to get my promaster setup like this.
@noalbloqueogenocida76292 ай бұрын
Great setup I have something similar I will post soon.
@harlanfuller4 ай бұрын
Glad the vids are paying off man.
@yawnahkay73623 ай бұрын
I love the Milwaukee build out so much
@officialmultie3 ай бұрын
Dope setup! Expensive
@jblaze23rod4 ай бұрын
Not going to lie, this is cool. Dope AF on the plumbing service van. And Milwaukee of course (bleed red) hahaha. But I liked it mainly cause of the song. One of my favorites
@jimhornyak65964 ай бұрын
Nice job!!
@tacklebox62394 ай бұрын
Nice done bro. Love the truck videos. Please show more
@Art4164 ай бұрын
Nice carpenter skills .. awesome job
@trevorstutterd67534 ай бұрын
Looks so good
@IngotTeck4 ай бұрын
“You gonna mess up any of the shallow tool boxes again boy”
@MaplejuiceVideos4 ай бұрын
I never thought I'd reach a point in life where I'd call a plastic box sexy and be serious at the same time.
@haeleypapa4 ай бұрын
HEY BOY!!!! You got some skills.....❤😂😂
@bradw05354 ай бұрын
Sweet setup buddy! Looks great 👍
@gregoryderosa80454 ай бұрын
🔥 . I need a van my pick up isn't IT.
@junioraguayo85744 ай бұрын
He finally hit his big toe with his vans shoes now he wears boots like a real man
@alexisbendelamousseauchocolat4 ай бұрын
The video’s good. The music’s gooder!
@troyb22084 ай бұрын
Heavy ass set up
@replumb4 ай бұрын
What are you using? Really light tools?
@eggshapedisraelioperative63174 ай бұрын
@@replumbyeah ryobi ones, oh wait
@alexhernandez84514 ай бұрын
Nice left handed skill saw bud, I got one too lol
@zeusgaribaldo83444 ай бұрын
WOW!
@pablogarcia17324 ай бұрын
I been doing plumbing at my job and can't even afford a milwaukee box or set or drills in Houston tx if u not legal they don't pay u good even if u bust ur ass,ur videos make me realize that one day i can be like u brother
@michaeldudas75844 ай бұрын
The problem is that somebody hired an illegal!
@demonhunter55244 ай бұрын
I did something similar to my new box truck. Nothing but a mobile supply house. 😂😂😂 I was able to increase my call volume and improve my customers satisfaction without wasting time by going to a supply store.
@PlumbForOne4 ай бұрын
I would hire you if you move to Florida lol
@truth67334 ай бұрын
Milwaukee is prolly cringing as you rattle canned the plywood. 😂 Solid.
@jseen95683 ай бұрын
When you were painting the wood my 5 year old said "hey boy, you get that black silly string off my jobsite" You've ruined the youth 😂
@replumb3 ай бұрын
Go back to the play doh boiiiii you ain’t ready for this craftsmanship
@ElektroKwapi4 ай бұрын
❤❤ Super!
@makenImprovements4 ай бұрын
Got the same Milwaukee tape measure keychain
@bmo14lax4 ай бұрын
Clean!
@Ericplaytoomuch13 ай бұрын
Edging rn I need this
@JPetersU2ube3 ай бұрын
@RePlumb awesome reuse of what you have as built: 0:07 Rivnuts in the original panel plug; 0:30 uni strut as saw straight edge
@JPetersU2ube3 ай бұрын
Well done you earned some LJS peg legs
@jonnyquest8043 ай бұрын
Fav plumber on YT
@Chads6.02 ай бұрын
My man changed companies and started dressing like a real plumber! My man
@replumb2 ай бұрын
What even is a real plumber
@Chads6.02 ай бұрын
@@replumb someone who lays down pipe with Carhart and steel toes on 😉 I ain’t hatin!!
@Vortechtral4 ай бұрын
How well will those stack locked in the upright without snapping the bottom plates off on turns? I know normal people don't take turns at maximum G's but sometimes you need to swerve.
@replumb4 ай бұрын
I’ve had this setup in my last van and it worked out well
@webfreakz4 ай бұрын
It's too clean I'm triggered!!
@jplopez28933 ай бұрын
What’s the black wall that you’re using?? (Sides of van, not the silver brackets nor plywood but the black walls you have)
@dominicjones60934 ай бұрын
Sweet
@defaultzenabled42614 ай бұрын
Can tell what tools he likes best lol or one that pays the most the world may never know
@davidtee7811Ай бұрын
Where did you shop for your unistrut?
@jakearmstrong45634 ай бұрын
Harbor Freight titanium Fluxcore welder works great on Unistrut.
@pgood72663 ай бұрын
Where do you put ladders?
@danimkn5794 ай бұрын
Add some straps so boxes wouldn't fall
@Heixifne4 ай бұрын
How does it take turns? Just curious, is there ever a look back when you got to cut it hard?
@replumb4 ай бұрын
Nah it turns great
@RVail6234 ай бұрын
"They said: 'Californy is the place ya oughta be'. So they loaded up the truck and moved to Beverly. Hills, that is. Swimmin' pools, movie stars."
@dr.t72454 ай бұрын
Not worried about those verticals?
@ThelifeandtimesofBarneyTaylor4 ай бұрын
I want a new van mine is the short top can't stand up van .my next one will be as tall as the Amazon kind
@truckerchops4444 ай бұрын
What do you got all that stuff for boy, all I is a rusty truck, torch, and a chanellock pliers...LOL
@jpsanch334 ай бұрын
Errrrrrrrr 5 gallon buckets and coffee cans are cheaper.
@Rupp453 ай бұрын
Wow that's thousands of dollars in those boxes
@jasoneastham31264 ай бұрын
You have a FACE…😂. First time I’ve ever seen it. Ha
@christopherbeharri1104 ай бұрын
What happen to the legs. Some reinforcement would help if u have to swerve
@geojesse92304 ай бұрын
I mean you could probably just tow Lowe’s behind your truck it would be easier
@ianicus1234 ай бұрын
A bottom rail for those legs would be better than them just digging down Ito the flooring.
@jamesarango91844 ай бұрын
Just wait till you do a hard right or a hard left turn
@ryderkimball71743 ай бұрын
How much did that cost
@gregoryderosa80454 ай бұрын
.. and this is your day off I bet lol
@josephboland54404 ай бұрын
I think that impact is little over kill for the job alright
@jefflosey15614 ай бұрын
Cost?
@rainzeros83934 ай бұрын
Today i learned that kindorf is a brand name like channel locks... Shouldve realized that sooner
@Ranger_F-24 ай бұрын
My bank account cried while watching this video
@martinlungu12654 ай бұрын
You're a rich dude!. Speaking as an African.
@YourFavouriteComment4 ай бұрын
I didnt see any labels on your boxes. Do you just remember where everything is. Also I'd bolt the vertical supports to the floor for added rigidity. Thats a lot of mass just held by a couple screws in the van walls
@replumb4 ай бұрын
Good idea. There’s a few labels but I just remember where everything is
@YourFavouriteComment4 ай бұрын
@@replumb hey boy I didn't need no labels either if all I had to remember where that fancy press and pipe cutters are ;)
@johnharvey54123 ай бұрын
Dude's toolboxes cost more than my house, not including what's in them.
@gio_324 ай бұрын
I’m counting like 4grand and that’s not counting what is inside. Park that baby in the garage.
@PaulBeenisYourFriend4 ай бұрын
Motherflusher dude
@kotablaize2554 ай бұрын
PepeJAMMER
@josephvaldez7374 ай бұрын
Dam bro let me get like 5 grand bro.
@otisbigsby4 ай бұрын
My add can’t let me sort my van without finding a flaw in every thing I design.
@tocatcha69694 ай бұрын
"No tools are left in this vehicle overnight"
@michaeldudas75844 ай бұрын
He doesn't care if somebody steals them. He begged them all!
@replumb4 ай бұрын
😂
@seventwenty45694 ай бұрын
Do you have GPS on the track?
@replumb4 ай бұрын
Yep
@jarenbriones71304 ай бұрын
Is that a transit?
@replumb4 ай бұрын
Yep mid roof long wheelbase
@2LuvCris4 ай бұрын
Nothing wrong with the way u cut the plywood but two quick grip clamps on an angle would take out the need to screw down your guide
@replumb4 ай бұрын
I had screws right next to me and no grips
@JPetersU2ube3 ай бұрын
@@replumbadapt and overcome git r done
@youdontknow71903 ай бұрын
I wonder how much debt you’re in to those Milwaukee tools?
@replumb3 ай бұрын
Paid in full
@dylb88014 ай бұрын
3/4 rattle gun haha
@dontspeak29944 ай бұрын
How many times are you going to redo this van?
@replumb4 ай бұрын
This is a different van brother
@JPetersU2ube3 ай бұрын
@@replumbdifferent company too MotherFlushers I did not know Steve at Plumbing Pros was your brother in law
@JPetersU2ube3 ай бұрын
My brother in law is a lawyer We are all disappointed hoped he would be something respectable ;)
@BLACKMONGOOSE134 ай бұрын
Bruh the music. Please tell me you don’t listen to that music in the van. (Kinda feel like you might.) 😮
@Will-vd7yb4 ай бұрын
The tools and the pack out cost more than the van
@replumb4 ай бұрын
Nope they don’t
@matthewsanchez9564 ай бұрын
Why tf is bro using a 1/2 inch gun to set screws😂😂. Real hardworking men laugh at dudes with a ford van packed with 20 k in tools😂
@michaeldudas75844 ай бұрын
He doesn't work. He spends his day begging tools!
@replumb4 ай бұрын
The only metric sockets I had were 1/2 and I have a 1/2 impact? Why wouldn’t I use it
@chris11104 ай бұрын
Looks expensive to buy and make
@gurrola54724 ай бұрын
Get out of my job site with this repost boy
@replumb4 ай бұрын
It’s brand new man
@gurrola54724 ай бұрын
New van then ?
@replumb4 ай бұрын
@@gurrola5472 yep
@gurrola54724 ай бұрын
@@replumbin that case IL get of my job site in boy in crazy voice)
@187wurstchenbude4 ай бұрын
Ford or Dodge?
@replumb4 ай бұрын
Ford
@pod93634 ай бұрын
I ain't paying ya ta play minecraft in yer little Tonka truck BOI just throw your shit in some buckets and get on the jobsite or you'll be livin out that thang!!