Paddling Up and Changing Power Fuses, Network SouthEast Training video

Рет қаралды 17,530

6 жыл бұрын

A training Video for Paddling and changing power fuses on Class 456, 455, 319 and Slam Door units. A Network SouthEast Training Video for Drivers in the South Central Division.

Пікірлер: 28

@ericssmith2014 2 жыл бұрын

"Ah, yes, well, you forgot that your train has a buffet car, so you're dead."

@bussesandtrains1218 Жыл бұрын

mild design oversight

@fetchstixRHD 8 ай бұрын

Call that a taste of death...

@PottersVideos2 3 ай бұрын

RIP

@390h8er 3 жыл бұрын

Were drivers expected to change a fuse as soon as it had blown, or wait until a suitable time/journeys end?

@jontownsend8090 4 жыл бұрын

People back then had more respect for danger than they do today, due to health & safety. There comes a point when too much h&s leads to complacency. Back in the BR days, they may have done things differently, but all staff respected the dangers.

@alfwedarf7764 4 жыл бұрын

Exactly, and all of the practices in this film are safe. When the narrator said that it was most important to absolutely ensure that the electrical loads in the train were isolated by means of the main isolator, that ALL shoes are firmly off the juice and firmly held by the paddles, means that there is no risk of explosion during fuse replacement. People had more common sense back then.

@manekdubash5022 3 жыл бұрын

Not convinced the death & injury rates then and now would support your contention.

@CosgroveNotts 5 жыл бұрын

Can't believe they are doing this. Definitely a no no in any other job

@marcuspotter5590 4 жыл бұрын

They don't anymore, this is an old video from back in 1993. They did things differently back then!

@CosgroveNotts 4 жыл бұрын

I wouldn't trust any kind of driver to change a house fuse.

@louiejonesponation 2 жыл бұрын

Still in Black and White? That was in late 1980s and is in black and white?!

@nigellewis4686 3 жыл бұрын

Do modern trains have circuit breakers instead

@ElliottHurst 3 жыл бұрын

I believe they still have shoe fuses

@fetchstixRHD 3 жыл бұрын

@@ElliottHurst: At least the Electrostars still do have the shoe fuses - they're quite visible (either covered with the electrical warning [Southeastern] or with the warning above the fuse [Southern]). Can't remember whether the Desiros and Aventras had them or not, but I'd think they do?

@Sophiebryson510 Жыл бұрын

@@fetchstixRHD the 250/1 have them the /2s (i hate them) /3s and /4s could be retrofitted

@danwoodhouse9290 5 жыл бұрын

MONOCHROME?

@marcuspotter5590 4 жыл бұрын

This is an old video from 1993.

@MannyAntipov 2 жыл бұрын

@WhiteShadow2k1 This is the late 80s and many training videos, even by Network Southeast themselves, were already using colour. What gives?!

@marcuspotter5590 4 жыл бұрын

Many years ago my father was an electrician's mate, he would never attempt any of the stunts depicted in this video.

@cjmillsnun 4 ай бұрын

They aren't stunts, and no he wouldn't because he wouldn't touch 750v DC electrics.

@srfurley 11 ай бұрын

On the class 71 when the pantograph was in contact with a live overhead wire were the shoes live? How did things work on the old 1200V side contact system on the Manchester to Bury line? I remember that these units carried a short circuiting bar which was a different design with a heavy metal ball on the end of the handle. Was there a type of shoe paddle for use with Regis system? Could any work be done on these units without the traction current being turned off?

@frostycola42 3 жыл бұрын

nse ran out of money

@srfurley 11 ай бұрын

Ok, so yo paddle up all of the shoes and check that there is no power to the unit. But what happens if something knocks out the paddles from under one shoe? Say an animal gunning alongside the track, or some object or damaged shoe gear sticking out from a train passing on the other line. Wouldn’t it have been safer if means had been provided for the normally live parts to be bonded to the running rails to prevent them becoming live unintentionally?

@vincitveritas3872 2 жыл бұрын

Need to get rid of third rail.

@g2macs 4 жыл бұрын

The ribbon fuse is a god-awful design, just pure laziness not to retrofit a trip circuit or a ceramic fuse 'plug' that keeps the driver safe.

@philaypeephilippotter6532 4 жыл бұрын

*g2macs* If you mean the large copper ribbon fuses above the collector shoe on the bogie the design is deliberate. These fuses wouldn't usually blow as the sub-station circuit-breaker would normally go first. The current they routinely handled was over 1,000 amps at about 750 volts.

@ericssmith2014 2 жыл бұрын

@@philaypeephilippotter6532 And here we are being told how to change one with our bare hands in the rain, hoping that we've remembered how to flip the right switches.