Paint Enhancement and Ceramic Coating Gtechniq Crystal Serum Light Real Detailing

  Рет қаралды 17,534

Miranda Detailing

Miranda Detailing

Күн бұрын

Пікірлер: 189
@404notfound.....
@404notfound..... 3 жыл бұрын
You guys really do some outstanding work down there, that SUV looks amazing and the shop is outstanding!! 👍👊
@bjimsondetailing
@bjimsondetailing 2 жыл бұрын
Your wife is so industrious kudos to her
@MirandaDetailing
@MirandaDetailing 2 жыл бұрын
Thanks!
@mag1vl
@mag1vl 3 жыл бұрын
Hello Phil + Jess from Down Under ;) Great video and great results, the red does really sparkle now.. Maybe when they see it they might change their mind and not get it washed at a car wash..
@jimrogiokos9690
@jimrogiokos9690 Жыл бұрын
I applied Crystal Serum Light 3 years ago on my 16 Accord , the preperation work is the most important and can be very time consuming . As a weekend warrior it took me 14 hours doing it alone with just a finishing polish to clean the paint . Customers need to understand that to get the expected results it is time consuming , labor intensive and this is why it is an expensive but great option for the ultimate in paint protection.
@CardosCarDose
@CardosCarDose 3 жыл бұрын
37:35 Dear car manufactures, why do you guys make our lives so much more difficult to clean glass? I have seen so many methods to clean hard to reach glass but its always the same issue of having to wipe at an awkward angle. Ive tried the Stoners Glass Cleaning Wand, but even that I have trouble cleaning really dirty glass on the back of Sedans and Windshields of Sport Coops. Glad you introduced the mitt method, gonna have to give this a shot myself. Sending love from SoCal! ;)
@BetterThanNewDetailing
@BetterThanNewDetailing 3 жыл бұрын
I use 1 n done 80% of the time combined with orange pads from either Lake Country or Chemical Guys. I also have 3D One and Sonax Perfect Finish. I will still use TW Hybrid Solutions Ceramic Polish occasionally.
@iadubber
@iadubber 3 жыл бұрын
Phil I wanted to thank you so much for all your videos. They are really helping me get off the ground! Cheers!
@MirandaDetailing
@MirandaDetailing 3 жыл бұрын
Awesome!! We love hearing that!
@chrissemsch8781
@chrissemsch8781 3 жыл бұрын
Excellent demo on the glass coating.
@harrynazarian3184
@harrynazarian3184 2 жыл бұрын
Those blue light filtering glasses, I don't think they're making you see weird reflections. You might wanna try toning down the Starbucks Double Espresso shot cans a bit. I chugged two of those back to back once, and I was seeing sounds man. SOUNDS! Wait, you said no stupid posts... will get deleted and blocked... Awww man :( What if because we are excited to post something funny and stupid because we enjoyed the video so much? :) I think you're awesome man, you and your wife. I've learned so much from your videos that I actually enjoy washing and detailing my cars now.
@Shamon831
@Shamon831 3 жыл бұрын
fabolous color love great work guys
@ddautodetailing
@ddautodetailing 3 жыл бұрын
The SUV is looking sharp! Always enjoy your videos and explanations of the products and use!!! Keep it up.
@granddetailing
@granddetailing 2 жыл бұрын
Excellent job!! love the great tip on interior mirror cleaning - awesome!! :-) i was kind of waiting to see how you polished the chrome front, since it's big it was a good opportunity to film that as well. I dont see many detailers to show us that. a bit disappointed there. but i had no trouble to watch the whole 46 min video because it's always educational, you take us through the process, talk us through it, explain, not just boring video of cleaning the same routine inside and outside just for a show. great job Phil, thank you for taking the time to make these videos!!! :-)
@originalsupermommy
@originalsupermommy 3 жыл бұрын
I splurged right at the start and bought a Grit Guard Pad Washer, and it's so easy, so fast, and in less than one minute the pad is literally clean like brand new!
@kennovakowski1246
@kennovakowski1246 3 жыл бұрын
Nice job Phil appreciate how realistic you are. Team work 👍🏻👍🏻🇨🇦
@greymark420
@greymark420 3 жыл бұрын
Good evening Phil and Jess. Cappuccino and an excellent video, happy days.
@shealaking8557
@shealaking8557 2 жыл бұрын
Realistic expectations of results. Way to go, Phil. More need to emphasize that, especially when dealing with daily driver vehicles. 🙂👍
@MirandaDetailing
@MirandaDetailing 2 жыл бұрын
Thanks so much! 😎
@mann8254
@mann8254 3 жыл бұрын
Great work guys, totally amazing👌
@ljhookem14
@ljhookem14 3 жыл бұрын
As always, informative & quality work done. I still remember watching some of your very first videos.
@curtisharper7042
@curtisharper7042 3 жыл бұрын
Good Morning Phil. Another great job on the vehicle. Because I am a proud owner of a GMC.
@UpstateAutoStyling21
@UpstateAutoStyling21 3 жыл бұрын
Up here on a mountain just chilling and enjoying another great video!
@joeyredmon
@joeyredmon 3 жыл бұрын
Great job!
@davidzayas4454
@davidzayas4454 2 жыл бұрын
Nice, loved the results.
@extremeoptimumautodetailin6616
@extremeoptimumautodetailin6616 3 жыл бұрын
Phil Jess awesome job great tutorial looks great I love you guys team work and passion for detailing as always be safe God bless William from extreme optimum auto detailing pr
@alexisamtosta
@alexisamtosta 3 жыл бұрын
Fantastic job bud!
@feliscampbell306
@feliscampbell306 3 жыл бұрын
Great vidéo From Campbells Moblie Detailing
@red.bk2autodetailing190
@red.bk2autodetailing190 3 жыл бұрын
2 ,,, Great work like always 👏
@LilRick96
@LilRick96 3 жыл бұрын
Just did 13 full details out in this stupidly hot sun 🥵🥵🥵 I'M DONE for the weekend
@MirandaDetailing
@MirandaDetailing 3 жыл бұрын
Dang man!! Get some AC and a super cold beer, or whatever your drink of choice it! 🍺
@marioskosmidhs9454
@marioskosmidhs9454 3 жыл бұрын
Again great video dear Phil, thanks for sharing..this car is a beast!!!
@RaldasDetails
@RaldasDetails 3 жыл бұрын
Great video brother!!
@millerdetailing4176
@millerdetailing4176 3 жыл бұрын
Great video Phil always enjoy all your content.
@MirandaDetailing
@MirandaDetailing 3 жыл бұрын
Thanks sir!
@onrdetailingnews802
@onrdetailingnews802 3 жыл бұрын
Great job buddy y'all got that truck clean tfs
@stilleysmobiledetailing1696
@stilleysmobiledetailing1696 2 жыл бұрын
lol i think this vid answered my text question..funny your awesome
@liquidshineelitemobiledeta1334
@liquidshineelitemobiledeta1334 3 жыл бұрын
Another great job and another video! I love that color on the Yukon! Thanks for all of the great training/teaching videos. #mustwatchtv
@chelsabailey1018
@chelsabailey1018 3 ай бұрын
Cool video, Phil and what an awesome outcome, too! Thanks for posting! I'm not a professional detailer, still, I find your videos enjoyable and informative. Question...can GTechiq's Crystal Serum Light be applied over the TW Flex Wax Spray Coating?
@MirandaDetailing
@MirandaDetailing 3 ай бұрын
Thanks! Nope, Gtechniq CSL should only be applied either on clean panel wiped paint or primers like Dr Beasleys NSP polishes. That goes for all coatings.
@Mdetailing
@Mdetailing 3 жыл бұрын
I liked the video sir, great results. Try some time DPC line coatings maybe you like some of them like T9, just your opinion on trying it. Keep up the great job
@jlane7731
@jlane7731 3 жыл бұрын
Looks great guys! I love washing my truck every weekend. I used turtle wax ceramic coating about four months ago. Do you still recommend that?I like trying new products just like you as well. Thanks as always guys. Be good!
@MirandaDetailing
@MirandaDetailing 3 жыл бұрын
Hi. Thanks! Oh yeah the Hybrid Solutions Spray Coating is awesome stuff. Totally keep using it if it’s working.
@Gumshoe88
@Gumshoe88 5 ай бұрын
Would have liked to see you show water repellent on treated half of windshield before you did both sides. Good job on that tank! 😅
@MirandaDetailing
@MirandaDetailing 5 ай бұрын
Hi. Thanks. Well I can’t do that during the job. That would mean getting the area wet. But check out the results when we maintain it. kzfaq.info/get/bejne/mZilhtWZ39C3mXU.htmlsi=cxju0UNh10UZPXyf
@Gumshoe88
@Gumshoe88 5 ай бұрын
@@MirandaDetailing sorry I didn’t mean to imply that you hose it down, but squirting a water bottle on it maybe to show the difference on how the water sheets off. thanks anyway!! good luck!
@MirandaDetailing
@MirandaDetailing 5 ай бұрын
@@Gumshoe88 Oh I see. Yeah perhaps. I'll try to show that in other videos. Thanks.
@sunilraj7692
@sunilraj7692 3 жыл бұрын
Another awesome vid! So unusual that the B pillars had no scratches on them. Be a sad day if you stop making vids!
@originalsupermommy
@originalsupermommy 3 жыл бұрын
I have the same drying towel from The Rag Company. 😁
@bjimsondetailing
@bjimsondetailing 2 жыл бұрын
You are wonderful.my questions is can I wash my car with water after polishing and then wax
@MirandaDetailing
@MirandaDetailing 2 жыл бұрын
Hi. Thanks. No need to wash again after polishing. You can wax right away.
@blondie1484
@blondie1484 3 жыл бұрын
Love the color. is it some sort of cherry red metalic? looks beutifull when its polish 😍
@jasoncraig7096
@jasoncraig7096 3 жыл бұрын
Great video!!! CSL is a great coating! So easy. Did you top it with anything? Do you feel it last any longer with EXO on top? That Yukon is identical to ours! That red is beautiful when cleaned up! Your pad washer is very similar to what I use to do. I splurged and bought the Lake Country. I feel it actually sped up my process and gets the pads cleaner. Thank you for the video!
@MirandaDetailing
@MirandaDetailing 3 жыл бұрын
Hi thanks! Yes it is! I learned from Gtechniq that it’s unnecessary to top CSL with EXOv4 right away. It can be applied a few year down the road when CSL starts to loose it’s hydrophobic layer. I do top it with C2v3 after the 24h however.
@jbm119jbm
@jbm119jbm 3 жыл бұрын
Phil. If you do rock chip repair, how about a video on that? Thanks for the video.
@MirandaDetailing
@MirandaDetailing 3 жыл бұрын
Hi. I don’t have any dedicated videos on that. But sometimes I include some touch up in my regular videos. I just use a tiny brush or tooth pick to fill in the chips. Sometimes I wet sand it gently and polish it.
@Ochtane101
@Ochtane101 Жыл бұрын
Hi guys, can you tell me what you guys use for your APC, in your pump spray bottle, before you do your contact wash? Thanks👍 Nice work, by the way.
@MirandaDetailing
@MirandaDetailing Жыл бұрын
Hi. Usually we just have Super clean at 1:10 in the pump sprayer. kzfaq.info/get/bejne/idVhiJurvJjIc2g.html kzfaq.info/get/bejne/mtJhaa573q-VpmQ.html kzfaq.info/get/bejne/Z7NnoLuQtJOXY58.html kzfaq.info/get/bejne/q8h0kpN_nLDTmYU.html
@J1Z06
@J1Z06 3 жыл бұрын
Terrific work! Your videos are so well done It's nice to see that You really don't have to put the paint under the microscope to coat it There's only so much clear(sadly) these days I've never tried CSL by itself I've always followed with EXO Have a nice weekend! Thanks for sharing another awesome video
@MirandaDetailing
@MirandaDetailing 3 жыл бұрын
Thanks so much!
@J1Z06
@J1Z06 3 жыл бұрын
@@MirandaDetailing You're very welcome! Keep these great videos coming.
@stevefulton5884
@stevefulton5884 3 жыл бұрын
Great video ya’ll. It’s really relaxing for me to watch these and I learn a lot. I have had Rupes LHR Bigfoot since I started back into detailing during Covid but I want a cordless to add to my arsenal. I also have not tried CSL. Do you all use EXO as a second layer?
@MirandaDetailing
@MirandaDetailing 3 жыл бұрын
Hi Thanks! Yeah we love our cordless!! We will top with EXOv4 if the customer requests it and pays extra. We found out after talking with Gtechniq that you really dont need to apply it right away, it can actually be applied a few years down the road when the top hydrophic layer of CSL wears off.
@stevefulton5884
@stevefulton5884 3 жыл бұрын
@@MirandaDetailing I am actually a 21 year pharmaceutical sales rep but I detailed as a kid back in college. During Covid quarantine, I started following you all and a few others that I like and was just blown away how the industry changed. I fell in love with the business all over again and needless to say, my golf game has suffered as a result but I have loved the work and look to transition this to a full time gig in the near future. Thanks for all that you and your wife do. I may have to come see you all soon and pick your brain a little bit.
@MirandaDetailing
@MirandaDetailing 3 жыл бұрын
That’s awesome man!! Thanks so much for the support.
@richardseem7948
@richardseem7948 3 жыл бұрын
As always awesome video and tutorial good friend. That spot looks and acts like some concrete that dried on paint.b well good friend
@rjanuari1978
@rjanuari1978 2 жыл бұрын
Hey, guys. Just found your channel and it's awesome. Would you guys have any recommendations regarding the detailing of a brand new vehicle? If you could give me some tips that would be awesome. Keep up the great work. Thanks!
@MirandaDetailing
@MirandaDetailing 2 жыл бұрын
Hi! Welcome aboard! Yes we detail many new vehicles! You will find many videos on our New Car Prep service kzfaq.info/get/bejne/nbKVlMlh0r2uoas.html
@rjanuari1978
@rjanuari1978 2 жыл бұрын
@@MirandaDetailing Thank you very much!
@MirandaDetailing
@MirandaDetailing 2 жыл бұрын
You’re welcome! 😎👍🏼
@patcap535
@patcap535 2 жыл бұрын
Another great video, looks great. I like that mitt I think it might be okay for the wheels and dash.also. Have you tried the wand from invisible glass that works good for the glass?
@MirandaDetailing
@MirandaDetailing 2 жыл бұрын
Thanks! Yeah I do have one of them glass wand things. It works sometimes, mostly it’s trying multiple things to make glass cleaning work for me.
@hartlanddetailer5670
@hartlanddetailer5670 3 жыл бұрын
Excellent Job, Mirandas! I have a question? When applying a coating, shouldn't you also apply the coating to the door jam? I noticed you used a Lithium product, maybe "Ignite" ? When possible, shouldn't all painted surfaces be coated, door jams, trunk & hood areas, etc.?
@MirandaDetailing
@MirandaDetailing 3 жыл бұрын
Hi! Thanks. Well at the owners request I will. But I leave that as an option that the customer can choose to have done. 👍🏼👍🏼
@adammathews9246
@adammathews9246 3 жыл бұрын
Does that glass coating have wiper chatter bad? Yukon looks superb, like everything else.
@MirandaDetailing
@MirandaDetailing 3 жыл бұрын
Hi. Not that I’ve experienced. As long as you change the wipers and/or clean them regularly.
@spoon55
@spoon55 2 жыл бұрын
I was wondering what is the Ivan lacroix ipa mix you were talking about and can you share how to make it?
@MirandaDetailing
@MirandaDetailing 2 жыл бұрын
Hi. It’s this kzfaq.info/get/bejne/i7Roh8Rhu86ag2g.html
@scottsaia5134
@scottsaia5134 2 жыл бұрын
Awesome video as always. Love the comment on the one and done to dampen your towel a little. When I used I found it extremely hard to remove. Excited to use it again now.
@MirandaDetailing
@MirandaDetailing 2 жыл бұрын
Thanks! 😎👍🏼
@scottsaia5134
@scottsaia5134 2 жыл бұрын
BTW. Best channel out there for detailing. I wish I had all day to watch the videos, but I have to work also🤣
@MirandaDetailing
@MirandaDetailing 2 жыл бұрын
Thanks! We work hard detailing and filming to make it enjoyable and educational! 😎👍🏼
@scottsaia5134
@scottsaia5134 2 жыл бұрын
@@MirandaDetailing I've learned so much in such a short time. I'm always looking to hone my skills and watching you both helps each day big time. I keep trying to get my wife to help me but no luck yet😜
@scottsaia5134
@scottsaia5134 2 жыл бұрын
Have you ever detailed a Toyota 86?
@greymark420
@greymark420 3 жыл бұрын
Never mind the panel wipe, i like the guy next to it.😁
@mynsxt6
@mynsxt6 4 ай бұрын
Link for the glass cleaning mitt please Phil, so innnovative😎
@MirandaDetailing
@MirandaDetailing 4 ай бұрын
Hi. You mean these? amzn.to/4aRJlGU
@mynsxt6
@mynsxt6 4 ай бұрын
@@MirandaDetailing Yes thanks
@MichaelJohnson-ko6td
@MichaelJohnson-ko6td 2 жыл бұрын
Would the 1 ounce bottle of the crystal do a small suv paint and glass?
@MirandaDetailing
@MirandaDetailing 2 жыл бұрын
Hi. Yeah the 30ml bottle of CSL would definitely do a large suv. Just manage how much you’re using and don’t over apply on the applicator. But you don’t apply it on glass.
@patricktuggles4815
@patricktuggles4815 3 жыл бұрын
Why don't you get the lake country pad washer? It saves so so much time lol and cleans the pad perfectly in seconds
@MirandaDetailing
@MirandaDetailing 3 жыл бұрын
Maybe I will🤔 …..maybe I will🤔 😁😎👍🏼
@patricktuggles4815
@patricktuggles4815 3 жыл бұрын
@@MirandaDetailing mannnn. You can do an entire car with one pad lol
@MirandaDetailing
@MirandaDetailing 3 жыл бұрын
Well do you mean washing the pad and spin drying and then using it again to polish? I have tried that and when the pad is still damp it would make a mess and splatter while polishing. That’s why we switched to simply grabbing a new pad and tossing the used one in the bucket to wash later.
@juanvargas2745
@juanvargas2745 3 ай бұрын
👌🏼
@raulc-ix4yp
@raulc-ix4yp 3 жыл бұрын
Great video !! Was wondering which air compressor you have ?
@MirandaDetailing
@MirandaDetailing 3 жыл бұрын
Hi. Thanks! This is the compressor we use in the garage. amzn.to/3Bq2AFN
@jameshowlett8811
@jameshowlett8811 3 жыл бұрын
Always enjoy your videos have you tried Meguiars ceramic coating yet?
@MirandaDetailing
@MirandaDetailing 3 жыл бұрын
Thanks...Not yet! but it looks good
@TheZigzone
@TheZigzone 2 жыл бұрын
Phil, would a 30 mil bottle of CSL cover a 2015 Jeep Wrangler 2 door with color matching hard top and fender flares that will need to be coated too?
@MirandaDetailing
@MirandaDetailing 2 жыл бұрын
Hi. Oh yeah. At least with our method it should be.
@TheZigzone
@TheZigzone 2 жыл бұрын
Cool, what’s your method or one that’ll keep me from running out?
@MirandaDetailing
@MirandaDetailing 2 жыл бұрын
Well I don’t over apply the coating on the applicator like some guys show. I use just enough to apply to a 2x2 foot section. On average I use 15-20 mils per vehicle. kzfaq.info/get/bejne/ftGRoblhutGVqas.html
@harisyoung4110
@harisyoung4110 2 жыл бұрын
Usually when doing paint correction, what speed to use on the polisher ?
@MirandaDetailing
@MirandaDetailing 2 жыл бұрын
Hi. Usually we have it at speed 5-6 for cutting and speed 4-5 for polishing.
@harisyoung4110
@harisyoung4110 2 жыл бұрын
@@MirandaDetailing thanks
@ArthurMSoto
@ArthurMSoto Ай бұрын
How did you approach polishing the chrome on this vehicle? Also curious on the longevity of CSL on plastics and wheels, I know they have dedicated coatings and never could find the answer how the two compared.
@MirandaDetailing
@MirandaDetailing Ай бұрын
Hi. The chrome is. We so we polished it just as we did the paint with Dr beasleys NSP 45 and used CSL on it. Here is the maintenance detail on it a year later. And even to this day and out 3 years later it’s still preforming like day one. The plastic trim still looks great but plastic trim coatings only last about 2-3 years and same goes with wheels. So at some point I expect those to start to show signs of wear. kzfaq.info/get/bejne/mZilhtWZ39C3mXU.htmlsi=81CHfM_loEndOdCl
@ArthurMSoto
@ArthurMSoto Ай бұрын
@@MirandaDetailing awesome, thanks for the responses they always help! you’re one of the best 🙏🏼
@MirandaDetailing
@MirandaDetailing Ай бұрын
You’re welcome. 😎👍🏼
@richardfield5176
@richardfield5176 3 жыл бұрын
Phil....where do you find plastic razor blade as shown at the 9:40 mark.....??
@MirandaDetailing
@MirandaDetailing 3 жыл бұрын
Hi. I got them here amzn.to/3sSAWy0
@viniciusvale42
@viniciusvale42 3 жыл бұрын
Phil, have you tested the new SPTA model? If so, what did you think of her? Will there be video on the channel? Good weekend!!
@MirandaDetailing
@MirandaDetailing 3 жыл бұрын
Hi. Oh yes we did!! kzfaq.info/get/bejne/jbSWrbinsLvTc4E.html You will see more and more of it soon!! 😎👍🏼
@johnboy5632
@johnboy5632 3 жыл бұрын
Another awesome video brother, I always learn soo much from watching your videos.I'm somewhat new to auto detailing. I had a question , . . . . . . . . . .What kind of camera/📷 Phone are you using?? The picture is coming out Awesome. any feedback would be greatly appreciated. 🙏
@MirandaDetailing
@MirandaDetailing 3 жыл бұрын
Thanks so much! In this video, I was using my Canon 200D(SL2) with the kit lens. But I recently upgraded to a Canon M50 with a Sigma 16mm 1.4f lens for my more recent videos.
@johnboy5632
@johnboy5632 3 жыл бұрын
@@MirandaDetailing ahh ok nice. I personally like nikons. I always thought the dslr cameras were too bulky Toby's for vlogs, but I guess the Mirrorles cameras with a handling grip makes it more manageable. Thank you for the response
@MirandaDetailing
@MirandaDetailing 3 жыл бұрын
Totally agree. I'm loving the M50. Its really nice
@adambrunious1284
@adambrunious1284 3 жыл бұрын
Awesome video, have you considered placing your product links in alphabetical order? Occasionally it's laborious to locate for purchase. Or it could be me, ha! Anyways, keep up to great content. You're the best.
@MirandaDetailing
@MirandaDetailing 3 жыл бұрын
Hi. Actually, that would be advantageous, but man it would take a while to organize for each video. 😂
@adambrunious1284
@adambrunious1284 3 жыл бұрын
@@MirandaDetailing Try using excel. It's been very helpful for my channel video descriptions, the bruno bunch.
@MirandaDetailing
@MirandaDetailing 3 жыл бұрын
Oh that could work.
@johntolbert6901
@johntolbert6901 3 жыл бұрын
Hey Phil/Jess, Another great and informative video...much appreciated!! Can you or have you done a video on a paint enhancement for a white car? And lastly, would you know if the paint on a 2017 Mini Cooper Countryman, is soft or hard? I will be getting a white one to work on. Any suggestions or tips would be much appreciated! Thanks and please Stay Safe!!
@MirandaDetailing
@MirandaDetailing 3 жыл бұрын
Hi. Thanks! Yeah we have a few kzfaq.info/get/bejne/hZp2qqmmubuzdI0.html kzfaq.info/get/bejne/psCPqtKUuN-wYKM.html Not sure about the Mini Cooper though. You only knows if the clear is soft or hard when you start polishing it. It’s hard to say sometimes.
@johntolbert6901
@johntolbert6901 3 жыл бұрын
@@MirandaDetailing thanks Phil, much appreciated! This helps a lot! Take care!✌🏾
@TheZigzone
@TheZigzone 2 жыл бұрын
I tried the Vision Protect glass coating and new wipers and the wipers chatter across the windshield like crazy in the rain. Cleaned windshield with invisible glass, machine polished with glass polish and glass polishing pad, cleaned again with invisible glass, then used the Vision Protect prep towelette, then the coating and finally a new set of Bosch Icon wiper blades. Rained 3 days after and the wipers chatter across the windshield. So annoying and very disappointed in Vision Protect.
@MirandaDetailing
@MirandaDetailing 2 жыл бұрын
That’s very weird. I have never had an issues with it. It’s on both my vehicles. Did you change the wiper blades?
@TheZigzone
@TheZigzone 2 жыл бұрын
@@MirandaDetailing yes, new Bosch Icon wipers that I’ve used for more than a decade and they’ve never chattered. I reached out to the Vision Protect and they blamed it on the wipers even though they’re new. 🤷🏻‍♂️
@MirandaDetailing
@MirandaDetailing 2 жыл бұрын
Thats very weird. Sorry that happened, I never have issues with any wipers chattering, ever. 🤷🏻‍♂️
@TheZigzone
@TheZigzone 2 жыл бұрын
@@MirandaDetailing No worries Phil. Not your fault. I just wanted to share my experience.
@MirandaDetailing
@MirandaDetailing 2 жыл бұрын
Thanks man.
@MirandaDetailing
@MirandaDetailing 2 жыл бұрын
Hey Guys! Check out the Yukons first Maintenance after 6+ months here kzfaq.info/get/bejne/mZilhtWZ39C3mXU.html
@Detailguy101
@Detailguy101 3 жыл бұрын
Hi phil, I had a friend who had his vehicle ceramic coated. The thing is I noticed that bug guts and rail dust still stick to his paint? I thought coatings prevented this or am I wrong?
@MirandaDetailing
@MirandaDetailing 3 жыл бұрын
Hi. How often is the vehicle washed and maintained? Does it sit outside or in a garage? There are many misconceptions about coatings. They are basically a “higher form” of protection, but certainly nothing bulletproof. Stuff will still stick to it, but it will be much easier to wash and maintain then any traditional waxes or sealants.
@Detailguy101
@Detailguy101 3 жыл бұрын
@@MirandaDetailing ok thanks that makes sense
@MirandaDetailing
@MirandaDetailing 3 жыл бұрын
You’re welcome!
@MahendraSingh-rp6er
@MahendraSingh-rp6er 2 жыл бұрын
Did you give up on rupes uno protect? I see its not in your go too arsenal, any updates/comments?
@MirandaDetailing
@MirandaDetailing 2 жыл бұрын
Hi. Oh yeah we still use it. We just have so many products we love to try others out.
@fireball7671
@fireball7671 3 жыл бұрын
Hey Phil, what's your favorite water spot remover for a vehicle that is already coated?
@MirandaDetailing
@MirandaDetailing 3 жыл бұрын
Hi. So far it’s Gtechniq W9. It’s not as strong as others but it works well for coated vehicles.
@fireball7671
@fireball7671 3 жыл бұрын
@@MirandaDetailing Thanks so much!
@niktherd3
@niktherd3 3 жыл бұрын
Hey Phil. What’s the length and brand of the pressure washer hose you’re using?
@MirandaDetailing
@MirandaDetailing 3 жыл бұрын
Hi. It’s this amzn.to/3sPZU0W
@TheZigzone
@TheZigzone 2 жыл бұрын
Phil, your thoughts of the Vision Protect windshield coating? Getting my windshield replaced and want to coat it with something that’s easy and won’t break the bank. Recommendations?
@MirandaDetailing
@MirandaDetailing 2 жыл бұрын
Hi. The vision protect is nice stuff! Very easy to apply. I have it on my Lexus GX and it’s great!
@Detailpops
@Detailpops Жыл бұрын
You think gtec panel wipe is still too strong even at 1:1? I had some swelling with it straight
@MirandaDetailing
@MirandaDetailing Жыл бұрын
Yeah I do not use the Gtechniq Panel wipe on paint at all now. Way to strong.
@Detailpops
@Detailpops Жыл бұрын
@@MirandaDetailing speak of the devil lmao I saw your video and did a truck wearing gloves , took em off today and I got contact dermatitis 😂 the struggle
@josephsweet921
@josephsweet921 Жыл бұрын
where are you located
@MirandaDetailing
@MirandaDetailing Жыл бұрын
Chesterfield VA. Check out our website for more info www.mirandadetailing.com
@mindbodyandsoul604
@mindbodyandsoul604 Жыл бұрын
how much was that package?
@MirandaDetailing
@MirandaDetailing Жыл бұрын
Our ceramic coating services start at $1000 for a 1 year coating and go up from there.
@frediricwalker1799
@frediricwalker1799 3 жыл бұрын
Frederic (Quebec,Canada) Hi Phil and Jess. Hi whant to do my first ceramic coating . What is best betwin carpro cquard and gliss vs gtechnic serum light ? My next question is if hi put gtechnic do you put toper and in the maintnance wash what protection do you put on? Thank (excuse my english)
@MirandaDetailing
@MirandaDetailing 3 жыл бұрын
Hi. I enjoy using both Cquartz and Gtechniq coatings. The CSL is rated as a 3-5 year coating. But at the 3 year mark it usually needs an application of EXOv4 to extend it. That’s how Gtechniq explained it to me. After CSL we also top it with C2V3 after the 24h initial cure.
@frediricwalker1799
@frediricwalker1799 3 жыл бұрын
@@MirandaDetailing thank you Phil. How many time betwin c2v3 application (week, mont)?
@MirandaDetailing
@MirandaDetailing 3 жыл бұрын
We apply for very 3 months or so. But you could even apply each time you wash.
@Detailpops
@Detailpops Жыл бұрын
Hey brother ! I have a lifted duramax truck coming in tomorrow that doesn’t fit inside the garage :/ we get morning dew here. You think it would be an issue if it gets moisture during the night after coating ? Wwyd? Lol
@MirandaDetailing
@MirandaDetailing Жыл бұрын
Hi. What coating are you using? If you are using the new Gyeon coatings you should be fine, because they cure faster. But any other coating I would be concerned about getting it wet to soon.
@Detailpops
@Detailpops Жыл бұрын
@@MirandaDetailing I was hoping to use CSL
@MirandaDetailing
@MirandaDetailing Жыл бұрын
It’s risky applying it outdoors. I would go with either a lesser coating or the Gyeon ones.
@Detailpops
@Detailpops Жыл бұрын
@@MirandaDetailing darn I figured. I was going to try to get there super early to finish let’s say 12 but by midnight it might have Dew :/ I’ll try to find a 5 year gyeon then. Appreciate ya as always my brother 🙏
@kimnewling5728
@kimnewling5728 3 жыл бұрын
Suv that size are alot of work. Would you say most of your polishing is paint enhancements? Or would you say 1 steps? Yukon turned out great! Hi wife!
@MirandaDetailing
@MirandaDetailing 3 жыл бұрын
Hi. Yea they are! Lately mostly Enhancements. My one steps are also very close to enhancements becasue we try to achieve the same results. That’s why I don’t have a “one step” service. I treat it as an enhancement instead. 😎👍🏼
@earljames5377
@earljames5377 3 жыл бұрын
When polish the glass what pad are you using sir?
@MirandaDetailing
@MirandaDetailing 3 жыл бұрын
Hi it’s this bit.ly/3kwMumU
@earljames5377
@earljames5377 3 жыл бұрын
Thank you!!!
@Detailpops
@Detailpops Жыл бұрын
Hey brother ! How many towels today do you go through using csl & what’s your preferred ones Btw that red looks WET 💦
@MirandaDetailing
@MirandaDetailing Жыл бұрын
Hi. it depends on the size, but usually 2-4 towels. I alwasy use new Kirkland yellow towels for coating leveling.
@Detailpops
@Detailpops Жыл бұрын
@@MirandaDetailing no wayyyyy. I have 4 new packs sitting there. I’ve been spending too much on towels that are soft for soft paints and coatings. They never micro marr?
@MirandaDetailing
@MirandaDetailing Жыл бұрын
As long as you use them gently they have never given me issues. On soft black paint any towel could mar. I always wash them first also. Sometimes a pack of towels will get pst quality control and they are not soft. I just return them and get another pack.
@Detailpops
@Detailpops Жыл бұрын
@@MirandaDetailing ohhhhh I never wash them first haha I’ll try that ! Thanks brother!
@NeoB-Lac
@NeoB-Lac 3 жыл бұрын
Brother, how long does it take you to do a job like that from start to finish?
@MirandaDetailing
@MirandaDetailing 3 жыл бұрын
Hi. On average about 6+ hours with the both of us. So about 12 man hours.
@NeoB-Lac
@NeoB-Lac 3 жыл бұрын
@@MirandaDetailing thank you sir!!! It came exquisite my man!!!! Tell your wife we say hi and we enjoying watching her throw down!!!
@MirandaDetailing
@MirandaDetailing 3 жыл бұрын
😁😎👍🏼
@rickvh0195
@rickvh0195 3 жыл бұрын
Hey man i have a question. I watched your video on removing sand and stuff from the interiour. But no matter how much i scrubbed and used the drill brush the sand and stuff wouldnt get out of the carpet It was a renault twingo soo the quality of the carpet is shit but how do you handel that?
@MirandaDetailing
@MirandaDetailing 3 жыл бұрын
Hi. Sand is one of the worst things to remove, in my case the sand is never 100% removed. We get it to an acceptable degree and call it. We always communicate with the customer and let them know that sand and dog hair is very difficult to remove 100% and there may be some that can't be removed. Basically lots of brushing and tamping of the carpets will bring the sand to the surface and it takes lots of vacuuming. it simply takes time.
@rickvh0195
@rickvh0195 3 жыл бұрын
@@MirandaDetailing yes thats what i had today with a customer but somehow i just feel bad that i couldnt give a better result. But would an extractor not get all the sand out? With the proper shampoos ofcourse
@MirandaDetailing
@MirandaDetailing 3 жыл бұрын
No an extractor doesn’t pull sand that well. Saturating the carpets with chemical or water doesn’t really help. It’s better to keep it dry, drill brush, tamp, and vacuum as much as possible. But honestly as detailers we have to learn to draw the line and stop it and when we realize it’s a loosing battle. We could be wasting time and money on those jobs unfortunately.
@rickvh0195
@rickvh0195 3 жыл бұрын
@@MirandaDetailing ohh okay i didnt know. Thx for the advice man have a nice day.
@MirandaDetailing
@MirandaDetailing 3 жыл бұрын
You’re welcome.
@1stfrompuertorico568
@1stfrompuertorico568 3 жыл бұрын
1st
@kimnewling5728
@kimnewling5728 3 жыл бұрын
Good morning
@1stfrompuertorico568
@1stfrompuertorico568 3 жыл бұрын
@@kimnewling5728 hello mate!🖐👍🖖 Hope you have a great and healthy day!
Easy Paint Enhancement and Sealant Detailing Service! #realdetailing
44:36
Ouch.. 🤕
00:30
Celine & Michiel
Рет қаралды 44 МЛН
Алексей Щербаков разнес ВДВшников
00:47
а ты любишь париться?
00:41
KATYA KLON LIFE
Рет қаралды 2,7 МЛН
Harley Quinn lost the Joker forever!!!#Harley Quinn #joker
00:19
Harley Quinn with the Joker
Рет қаралды 27 МЛН
DON'T BUY CERAMIC COATINGS BEFORE WATCHING THIS !!
37:51
Pan The Organizer
Рет қаралды 649 М.
GTECHNIQ detailing products : Brand Review !!
25:03
Pan The Organizer
Рет қаралды 86 М.
Gtechniq Ceramic Coatings Explained
28:53
The Detailing Space
Рет қаралды 28 М.
Unclogging  a Ceramic Coating! #ceramiccoating #detailingtips #detailing
24:53
Can We Rescue This Older Lexus? #detailingtips #realdetailing
47:10
Miranda Detailing
Рет қаралды 12 М.
Why Gtechniq CSL + EXOv4 Is Our Favourite Ceramic Coating
28:54
Omni Garage
Рет қаралды 3,1 М.
ПРОЩАЙ, ЛЮБОВЬ МОЯ
45:07
Асафьев Стас
Рет қаралды 1 МЛН
Ремонт BMW 535i GT молотком и зубилом!
52:57
ИЛЬДАР АВТО-ПОДБОР
Рет қаралды 2,5 МЛН
Разогрев водителя
0:16
yanapozitive37
Рет қаралды 227 М.
Сэнсэй и СИНЯК! inst: psawkin
1:00
Petr Savkin
Рет қаралды 105 М.