Paint gun for small compressors! Amazing budget clear

Рет қаралды 155,251

Жыл бұрын

In this episode I'll share with you the best budget paint gun for small compressors and a fantastic budget clear that will give you a great quality finish! See how well this gun and clear performs as I paint and clear this Dodge truck!
My amazon affiliate store : Tools and materials categorized to help you find what your looking for
CLICK HERE
⬇️⬇️⬇️⬇️⬇️⬇️⬇️⬇️⬇️⬇️⬇️
www.amazon.com/shop/garagenoise
In this video(affiliate links)
⬇️⬇️⬇️⬇️⬇️⬇️⬇️⬇️⬇️⬇️⬇️
LVLP R500 paint gun
amzn.to/3SLaaCZ
Upol clear
amzn.to/3WaxGwl
dura gold latex gloves
amzn.to/3T3nfJs
Disposable paint cups and liners
amzn.to/3CbOwDr
Tack clothes
amzn.to/3K7ivOS
astro sun light
amzn.to/3MMJPl0
If you find this video helpful be sure to let me know in the comments. I welcome your feedback and questions
SUPPORT THE CHANNEL
⬇️⬇️⬇️⬇️⬇️⬇️⬇️⬇️⬇️
LIKE AND SHARE VIDEOS
SUBSCRIBE!
COMMENT!
AFFILIATE LINKS!
www.amazon.com/shop/garagenoise
Business Inquiries: okpaintworx@gmail.com
Follow us on Instagram and get the scoop on upcoming projects!
/ garagenoise247
Follow us on Tik tok
vm.tiktok.com/ZMeV1et9D/
video equipment I use
⬇️⬇️⬇️⬇️⬇️⬇️⬇️⬇️⬇️
Go pro 7 black
amzn.to/35ddyAf
Rode wireless go
amzn.to/3xpJDAW
Dji osmo action
amzn.to/3cCjdUD
Acer Nito 5 laptop
amzn.to/3wvc2W0
CHECK OUT MY OTHER HOW TO VIDEOS
⬇️⬇️⬇️⬇️⬇️⬇️⬇️⬇️⬇️⬇️⬇️⬇️
Autobody repair made easy
• Auto body repair made ...
how to prepare primer for paint
• How to prepare a car p...
using body filler to repair a dent
• Using body filler to r...
How to repair body damage on your car
• How to repair body dam...
how to save a bad paint job
• How to save a bad pain...
How to repair and paint your bumper
• How to save money pain...
How to remove fisheyes from your paint job!
• How to remove fisheyes...
How to save a bad paint job
• How to save a bad pain...
Song: Dipcrusher - Islands (Vlog No Copyright Music) Music provided by Vlog No Copyright Music. Video Link: • Dipcrusher - Islands (... -----------------------------------------
Disclaimer:
Due to factors beyond the control of Garage Noise, it cannot guarantee against unauthorized modifications of this information, or improper use of this information. Garage Noise assumes no liability for any property or personal damage that may arise from doing a repair on your vehicle after watching any of my repair video's. Due to factors beyond the control of Garage Noise, no information contained in this video shall create any express or implied warranty or guarantee of any particular result. Again Any injury, damage or loss that may result from improper use of tools, equipment, or the information contained in this video is the sole responsibility of the user and not Garage Noise.

Пікірлер: 276

@GarageNoise Жыл бұрын

Hope you enjoy this video, and it helps you with your project! If your new to the channel or have any questions about your project let me know in the comments!

@DJJDSKREWED Жыл бұрын

what size compressor where you using about to order this gun and repaint my sons z28 camaro thanks for the info

@GarageNoise Жыл бұрын

@@DJJDSKREWED I'm using a a ingersoll rand full size compressor.

@DJJDSKREWED Жыл бұрын

@@GarageNoise how many cfm? and or gallon tank im looking to buy a affordable compressor to use this gun for my home body work

@GarageNoise Жыл бұрын

@@DJJDSKREWED ok, Buy the most cfm's you can afford. My compressor produces around 16 cfm I believe it's a 60 gallon but that doesn't matter as much as the air production and hp. More horse power the quicker your compressor will recover. For painting it's all about the cfm's. Hope this helps there's alot of other factors to consider when buying a compressor. Like what's your power source do you need a single phase compressor or a three phase. Appreciate the support hope this helps!

@DJJDSKREWED Жыл бұрын

@@GarageNoise thank you very much! im going to shoot for a 5.9 cfm 29 gallon 2hp one from harbor freight !

@uriel-heavensguardian8949 Жыл бұрын

Finally!!!! Somebody explaining and using this type gun!! I’ve been researching my but off trying to find the best gun for my application. I wish I would’ve saw this before I bought the Harbor Freight purple gun. But it’s ok. I’ll still use it for something! Thanks for this video!!! Was going to get the “spray it sp-352” with the swivel side cup for painting upwards.

@Genshim5 Жыл бұрын

Great 👍 ! I'm from Nicaragua and there haven't yet pro-sprayguns that those are very expensive, for pocket and this one low price but you show me perfect option and how to use it. And can see a beautifully paint work , Thanks 🙏 . Stunning finish!

@88Painterman Жыл бұрын

That lt100 is a great gun.. great video as always!

@Lucy00682 Жыл бұрын

Indeed I did...the outcome was beautiful. Great job. I'm 66 and you have inspired me to paint the door of my 1998 Corolla.

@GarageNoise Жыл бұрын

That awsome! Appreciate the comment and support!

@sergioferreyra3095 Жыл бұрын

You are incredible, always helping your subscribers with information and clarifying our doubts, for those of us who do not have a painting camera or money to buy $700 paint guns. If you have that result without a painting camera, I can't imagine the result if you had a special room. thanks for all your time. You are the best brother

@GarageNoise Жыл бұрын

I appreciate you! All the support inspires me to reach deeper and bring better content every week! Thank you!

@williammartino952 Жыл бұрын

This was just what I was looking for! Thank You!!!

@GarageNoise Жыл бұрын

Welcome brother! Appreciate the support!

@theroadtonascar3568 Жыл бұрын

Thanks again great video.

@dennish9519 Жыл бұрын

good timing on this video. I have the eastwood lt100 and right now I am in priming and blocksanding stage on my project. Basecoat/clearcoat is coming soon and I was not sure what settings I should use, now I do! Thanks for the great video.

@GarageNoise Жыл бұрын

Happy to to help! Hope everything goes well. Appreciate the comment and support!

@TOMVUTHEPIMP Жыл бұрын

Im restoring a C10 and doing prep work. I have a Devillbiss FLG5. Been trying to decide what to do about the compressor issue. Its a one time paint job. Dont want to buy a big compressor for a one time job. Dont want to buy a small compressor and not have the low CFM issue and dont really need a compressor for anything really. I think Im going to rent a compressor from a tool rental shop. Ive never seen any KZfaq channel mention this option. They rent 15CFM gas powered compressors for $150 a week or $60/day. Have the CFM needed, no big outright compressor purchase, no big compressor collecting dust when Im done. Just need a hose, filters, pressure gauge.

@brennanfurca7009 Жыл бұрын

Thanks for sharing all this info for us home gamers.

@GarageNoise Жыл бұрын

My pleasure, appreciate the support!

@comfort_in_discomfort Жыл бұрын

That's the clear I'm using on my Wagoneer project. I don't know any different, but it works for me so far and it's easy to spray with my LVLP.

@GarageNoise Жыл бұрын

👍appreciate the comment and support!

@israel9294 9 ай бұрын

Thank you for taking time to answer my question, it means a lot to me. I’m new to painting I wanted to know if I have to press the trigger all the way down when painting single coat or laying down base coat or clear coat, thank you

@pablogarciavasquez6637 3 ай бұрын

GREAT MASTER AND GREAT WORK , SO BEAUTIFUL ! THANK YOU . GREETINGS FROM PERU. ESTA MUY INTERESANTE ESTA PISTOLA. TENGO UNA LVLP Y TRABAJ MUY BIEN.

@jrv858 Жыл бұрын

Great finish i bought the kit that comes with the mini gun have not use the big gun i used the touch up gun and worked great with me 30 gallon tank

@GarageNoise Жыл бұрын

Oh that's cool, good to know! Appreciate the comment and support!

@suspensefulness 5 ай бұрын

man thank u....i have that central pneumatic 21 gallon compressor and i wanna paint my mustang bumper now i think i can...ii subbed to your channel...gonna pick up the lvlp 610 or 500 today

@nestormoran2812 Жыл бұрын

Very useful info! I've been using the blue Astro gun but am getting a lot of material in the air when clearing. The Sprayit/Eastwood gun looks like a great option for my garage spray projects.

@stevezack6077 Жыл бұрын

Are you using pps cups? That happened to me and i got rid of white plastic cups with the small filters that go into the cup. The big filter on the pps solved alot of my issues with budget guns, saved a ton in cleaning time and materials with disposable

@user-cz8pt9vd5k Жыл бұрын

سلام استاد برای پاشیدن رنگ متالیک آیا باید حتما از سری سوزن نازل ۱،۵استفاده بشه❤

@1984-TTJ Жыл бұрын

Very nice!👍

@GarageNoise Жыл бұрын

Thank you! Appreciate the support!

@timmoulthrop8510 Жыл бұрын

Good job on videos my question is how do you deal wit all the over spray. I see stuff in your shop that's gonna get over spray. I keep looking at that tool box which is like one of mine. Do you usually cover everything you care about?

@gorrillacgorilla405 Жыл бұрын

Nice job!!!

@GarageNoise Жыл бұрын

👊👍

@nestorenriquehuerta6309 Жыл бұрын

Perfect

@satamanschmidt3428 Жыл бұрын

I like the ASTRO gold gun for the same purpose. I think it gives a nicer clearcoat finish that this gun and it's not that big of an air hog. Uses more than this gun but still within the realm of possibility.

@thelonewolf2288 18 күн бұрын

Thanks that was really a blessing knowing I can paint without a massive 60 gal - 80 gal expensive compressor. Great video !

@Fourandaquarter 9 ай бұрын

I couldn't tell from the video, but I regularly would wet the floor with some water to keep down and trap dust on the floor. I painted several hundred cars in a homemade cross draft booth and would always spray a mist of water on the floor and walls to wage war on the ever present dust. Nice video. I'd like to try that gun out.

@GarageNoise 9 ай бұрын

Absolutely great tip! Appreciate the comment brother!

@Gegsite Жыл бұрын

Just ordered from Ali (50$ an r500) because of you, tho I have about 6 (hvlp) paint guns already. Keep it up! Greetings from Hungary

@GarageNoise Жыл бұрын

Thank's brother! Appreciate the support!

@chuckyz2 8 ай бұрын

Looks great. Wonder how well it holds up over time. It's been a year. Any feedback on durability?

@YootubeUK Жыл бұрын

Interesting! I've just ordered a R500 so I'll see how I get on with it! Thanks for the tip. :)

@GarageNoise Жыл бұрын

Let me know how you like it!

@YootubeUK Жыл бұрын

@@GarageNoise It will be a couple of months but sure, will do!

@clinttorres2508 Жыл бұрын

It's a great gun

@BearBudgetTurbine Жыл бұрын

I upgraded to a 2 stage 60 gallon, but still use this gun a lot for base. It works and overspray is pretty low. And my compressor doesn't have to work too hard. In fact, will be using it today on a Ford truck

@ygayovy 6 ай бұрын

You pretty much confirmed that it's working flow is waaay higher than 4cfm.

@marty3553 Жыл бұрын

Hi mate I really ❤ your video

@GarageNoise Жыл бұрын

👍

@bosshawg7427 Жыл бұрын

Upol makes good stuff. I've used the 2253 primer that sprays great as a high build or a sealer. The 2882 clear lays down nice also. I'm not sure how good the UV protection is, but for the price, it's worth it.

@GarageNoise Жыл бұрын

For sure, feel the same way. Appreciate the comment on your experience. Thank's for the support!

@jamesward5721 Жыл бұрын

Try the Novol "Protect 360" 2k epoxy primer - you'll like it.

@samster978 Жыл бұрын

is the ok for if i spray in my garage? would it be safe if i say just had one extraction . wearing a respirator and overalls of course

@MattWilson-nl4zk 6 ай бұрын

Thanks!

@GarageNoise 6 ай бұрын

Welcome!

@MontsweagGarage Жыл бұрын

Thank you for making this video. I am getting prepared to do my first paint work (hopefully this summer) and I am interested in this gun. The info you share on pressures, spray distance, and speed great. I am curious to know how this gun would fair with laying a drop coat for a metallic paint.

@GarageNoise Жыл бұрын

I've got a new video on this gun check out the channel. I blend a red pearl

@MontsweagGarage Жыл бұрын

@GarageNoise Will do. Just subbed. I have already found a ton of info I will find useful on the project.

@GarageNoise Жыл бұрын

@@MontsweagGarage awesome!

@STUDIO-2.1 Жыл бұрын

Hi, from Trinidad🇹🇹, i had this problem when i recently sprayed my car, air fluctuating. 28gallon compressor, ...im going to have to get this gun.

@GarageNoise Жыл бұрын

It really is a great solution. Appreciate the support!

@kevinhalbleib3588 4 ай бұрын

Can you use this gun for epoxy primer as well as base coat and clear coat?

@hazmatty36141 9 ай бұрын

I'm painting with the Eastwood low cfm gun and a 29 gallon harbor freight compressor and I have minimal issues.

@GarageNoise 9 ай бұрын

Eastwood Lt 100, great gun I have one. I believe it's the same gun rebranded. Appreciate your comment!

@gergemall 10 ай бұрын

Thank you

@GarageNoise 10 ай бұрын

You're welcome

@anthonydito2974 Жыл бұрын

Great video! Thanks! New to auto painting….. do you think this gun can be used to spray an epoxy primer? Most likely will be using a smaller 20 gal compressor as well

@GarageNoise Жыл бұрын

Yes but you need the one with multiple needle sets I'll leave a link amzn.to/44Be1t2 So this is the same gun just updated version but it comes with a 1.7 tip and needle set an that should be big enough for epoxy.

@emilfrias4991 7 ай бұрын

Thanks for sharing the information you provided. Are there any spare parts or rebuild kits for the "R500" variants on the market?

@GarageNoise 7 ай бұрын

So many different brands sell this gun. Even eastwood's lt 100. Aero pro a 610, yt160, inokraft d1. Yes, you can get new needle set. I really don't think there's any part to go bad. Theres No gaskets, may be a o ring but that's it.

@BoostedGeeks Жыл бұрын

Great video and information. I'm trying to word this question to my best ability. Between what minimum size compressor to the maximum size compressor would this gun be suitable for. Do you have a compressor or compressors in mind that you can recommend? I am planning to try to paint an engine bay soon once the motor is out if not the whole car using a 110 socket at home in my garage. Appreciate any feedback, Thanks.

@GarageNoise Жыл бұрын

For this gun you want a compressor that produces 4cfms or above. When buy a compressor for painting a car the cfm it produces is what matters. I always say buy as many cfm's as you can afford. I don't have one to recommend . May have a video in the future for this topic. Hope this helps. Appreciate the support!

@fbkinetics Жыл бұрын

Luv it. Q: Because a lplv gun sprays slower, if I’m doing a full car should I use a slower reducer so I can finish a side before one end begins to flash over/dry?

@GarageNoise Жыл бұрын

Yes, a slow reducer would be the right choice. Unless it's cold when you paint. Your referring to you base coat correct?

@Archeydec Жыл бұрын

I watch your video's I work in a body shop i trim a lot of parts an use to paint looking to buy my own gun for own projects but dont want to tie up a lot cash if i dont have too thanks for the reply.

@GarageNoise Жыл бұрын

This would be a goid one.

@gutshotgriz3936 5 ай бұрын

You mentioned using the Clear Coat Fast Activator, but the can in video was Standard Activator. Does that make any difference in the application as you described it?

@nestorenriquehuerta6309 Жыл бұрын

Yes Sr

@jamesmarques7245 Жыл бұрын

Spot job looks good 👍 gun sprays well. What temperature did you paint??

@GarageNoise Жыл бұрын

Thank's brother, It was about 75-80°

@Whitening98 Жыл бұрын

Out of clear coats that you've used, what would you say is the best "budget" clear coat under $200 ? I just started watching your channel recently. Very good videos keep it up!

@GarageNoise Жыл бұрын

I like the nason 498 clear for under 200.00 Or matrix ms52 amzn.to/3Akhhvx

@johnjenson5738 3 ай бұрын

What size tips are you using.Thanks

@irietropicals4255 Жыл бұрын

Dang son! Hammer time 💧

@GarageNoise Жыл бұрын

👍👍👊👊

@gutshotgriz3936 5 ай бұрын

How much flash time do you allow between the clear coats?

@jonledgin5614 4 ай бұрын

What are the specs on the air compressor you used for this? I’m interested in a lvlp gun/ small compressor setup for my garage. Any help is appreciated.

@dropbear9526 8 ай бұрын

I've been watching your video's on this gun and a few other things. Seems like the right gun for my needs. I was just wondering, do you have a link for the correct adaptor to fit the disposable cups you use? I'll be using the same disposable cup system. A link for the gage would be great as well. Thank for sharing.

@GarageNoise 8 ай бұрын

This link is for the yt160 which is the updated appearance of the orig R500 and this one come with the adapter and some cups amzn.to/3QDxeEE

@dropbear9526 8 ай бұрын

@@GarageNoise Thank you. Much appreciated 👍.

@alimabrahim4462 Жыл бұрын

thank you so much i have a 100 litre Hoteche 3HP BUT I THINK ITS MORE LIKE 2 HP compressor its the cheapest i can afford and i have the sprayyit 5000

@GarageNoise Жыл бұрын

👍

@theroughblueram114thgen5 11 ай бұрын

Question ; I’m going to be using the Aeropro A610 to spray my Ram truck in a base coat jet black and clear coat 1. What pressure at Gun Base coat ?

@GarageNoise 11 ай бұрын

About 24psi , fluid at 2.5 out from closed and adjust if needed

@rogeryanez8107 Жыл бұрын

Nice video brother, Would you say this Sprayit gun is better then the Orange Astro gun Lvlp ?

@GarageNoise Жыл бұрын

I would say it's definitely more versatile because of the low air consumption. Both are great budget guns .

@mikepadilla9065 Жыл бұрын

Do I need a gun adapter for the disposable cup set you have listed in description. And are the adaptors universal?

@GarageNoise Жыл бұрын

Yes you do, the adapters are not universal for every gun. I got mine at harbor freight. I think it it the 3/8 female don't quote me tho.

@mikeammargon6847 Жыл бұрын

1 question.. if you got the perfect texture...and no need to cut and buff.. but it has dust nibs.. what do you do to keep the proper texture without making a flat spot??

@GarageNoise Жыл бұрын

That might be another video lol but I use a small block and 2000 sandpaper to remove dirt nib then sand a larger area with 3000 then a larger are with 5000. So gradually working out. The difference in texture is basically undetectable. Appreciate the comment and support!

@dsimms6 Ай бұрын

My local store only stocks the UP2882, can you use that as well? What's the biggest different between that and the UP2892 that you mention?

@handyishrandyish334 Жыл бұрын

What’s the most used size on your masking paper I’m looking at buying a masking stand not sure on what sizes I’d use most currently I just use 3m plastic to mask but paper would be handy here and there

@GarageNoise Жыл бұрын

I use 18inch and like you I mostly use plastic. Appreciate the support!

@handyishrandyish334 Жыл бұрын

@@GarageNoise thank you for the reply! Do you ever use the small like 6-8in say for like inside mirrors or tail holes

@DentZero123 Жыл бұрын

Chris could you please tell me what the best mini spray gun for a low compressor would be that I can use over and over again in your own opinion

@GarageNoise Жыл бұрын

Sprayit makes one haven't tested it. Also astro makes some that I hear are good but again I haven't tested so can say for sure.

@mitchellferre1652 Жыл бұрын

Sata 4400, pro lite mini. Mini guns use less air than full size guns so they work well with small compressors.

@scottdilalla Жыл бұрын

Thank for such an amazing video. Just curious ..what is the difference between this clear and UPOL 2882?

@GarageNoise Жыл бұрын

2882 is a overall clear if you painting an entire vehicle .

@scottdilalla Жыл бұрын

@@GarageNoise Ahh, ok. I'm painting a motorcycle gas tank so it's not a very large area but do you think the 2882 is the better choice? Just need something good yet forgiving. Thank you

@GarageNoise Жыл бұрын

@@scottdilalla 2892 is the better choice because its for small parts one or two full panels, it will dry quickly . 2882 will work tho .

@scottdilalla Жыл бұрын

@@GarageNoise great!! Thank you!

@luisdiaz9142 Жыл бұрын

@Garage Noise - I was thinking of spraying the basecoat at 28 psi but now seeing the finish on your truck im doubting myself if I should go lower(painting my whole hatchback) 😅

@GarageNoise Жыл бұрын

Yeah for basecoat you can probably go with less pressure 15-20psi

@luisdiaz9142 Жыл бұрын

@@GarageNoise even if its a pearl basecoat I shouldnt have any issue spraying it at 15-20psi?

@GarageNoise Жыл бұрын

@@luisdiaz9142 even if it's pearl base, the color should not effect how the basecoat sprays. Unless you've added some coarse metallics.

@michaelbell7465 Жыл бұрын

Nice video. What size needle and fluid tip did you use? Reducers and their percentages?

@GarageNoise Жыл бұрын

1.3 fluid tip. Paint reduction for nason is 2:1 clear is 4:1

@michaelbell7465 Жыл бұрын

@@GarageNoise No reducer in the clear, just the hardener?

@GarageNoise Жыл бұрын

@@michaelbell7465 no reducer in clearcoat. I know others do it but I feel it lessens the effectiveness of the u.v. protection and in turn the durability. Honestly it's not needed for most clears. If you feel you need to always check the technical data sheet. Good question, appreciate the support!

@Nicola---Cambridge Жыл бұрын

Hi great video. I’ve read for paint spraying the minimum cfm is around 12. Would this gun work with a small compressor, if so can anyone recommend which size/brand. Which compressor was used in this video, please. I’ve been looking at HVLP turbine units for painting but compressor/ gun setups seem quieter, give a finer finish and are perhaps less costly.

@GarageNoise Жыл бұрын

Personally I would go with a compressor gun set up. Yes , this gun will only require around 5 cfm's of air to spray properly, that's what's so unique about this gun. So most 20 gallon compressors will work well. I always recommend getting the most cfm's you can afford. I use a large compressor and don't have any recommendations for a small compressor at this time.hope this helps appreciate the support!

@Nicola---Cambridge Жыл бұрын

@@GarageNoise many thanks Happy New Year

@joshmadden4871 Жыл бұрын

27 gallon Fortress from harbor freight produces 5.1 CFM That’s what I’m using with an R500 works just fine

@9496juan 8 ай бұрын

What compressor did u use?

@DentFreeImagePeterVega 11 ай бұрын

Great video! Looks like these guns spray very nice. When compressor size is not an issue, would this be a better gun when compared to the HF black widow or an entry level Iwata? I ask because I will be spraying a classic VW van using an inflatable booth, that is slow removing the overspray. The van bolt on panels will be sprayed first then later the roof and then the body. With the R500 gun would I still get good results with the larger panels on the van. Would the parts dry time be an issue with a smaller fan and possibly spraying at a slower speed? I will like to be able to follow the paint wet edge without the clouds of paint in the air and it looks to me that one of the benefits of this gun is not having a thick cloud in the air. Greatly appreciate your advice.

@GarageNoise 11 ай бұрын

You do get less overpray with the R500 but do sacrifice a bit of speed. You can increase your speed with the R500 by reducing the spraying distance. For your situation I think I would use the R500 on the loose part and the black widow on the body of the vehicle. You can get just as nice of a finish with the R500 tho. It sounds like a fun project shoot me some photos after paint. I might be able to share with the community. Garagenoise247@gmail.com

@GarageNoise 11 ай бұрын

P.s. R500 Fan size I don't find to be an issue. About 10 inch

@DentFreeImagePeterVega 11 ай бұрын

@@GarageNoise thank you for your advice! Would the R500 be able to do the body as well? The roof will be the largest panel i will be spraying first by itself. I ask because I will be afraid of having different texture using two different guns. I saw another video about the R 500 a few years old, and the person did not recommend this gun for a complete job because it doesn’t have enough volume and will leave dry edges when working large areas constantly, according to him. Looking at your videos looks to me that is capable. I think spraying a little slower may help me focus on how things are laying down, don’t know if that makes sense. I will definitely send you some pictures of the process. Thank you again!

@bingo90210 11 ай бұрын

I have a 60 gal.125psi, 13.5cfm compressor. Would that be over kill for this gun? Or Would you recommend a different gun for my compressor?

@GarageNoise 11 ай бұрын

It's not overkill, this gun will preform Ethier way. You could use any gun with your compressor. Just depends on you needs. Cost, skill level, pro or hobbiest

@willsmith8058 Жыл бұрын

What is the model and stuff for that adaptor and cup you are using on this gun

@GarageNoise Жыл бұрын

The adapter is a 57505 spectrum from harbor freight or a 3m legacy #2 adapter. Here's a link to the disposable cup kit amzn.to/3GZgzqq Appreciate the comment and support!

@garagenut2012 Жыл бұрын

What pps adapter work with this? I have the original pps which works with the harbor freight knock off stuff which is nice if I run out on a weekend.

@GarageNoise Жыл бұрын

Not sure of the size but it's a female adapter that i got at harbor freight. I want to say 3/8

@garagenut2012 Жыл бұрын

@@GarageNoise thank you keep up the good work I’ve painted a dozen cars from learning on your videos

@Jahrome3278 Жыл бұрын

Just in case I missed it ,but what size tip is on your spray-it spray gun?

@GarageNoise Жыл бұрын

It's a 1.3 appreciate the support!

@ronj6586 5 ай бұрын

what hp and gallons is your compressor?

@Idealmediaatoz Жыл бұрын

Yes👍🏼👍🏼👍🏼

@GarageNoise Жыл бұрын

Appreciate it!

@LuisC202 Жыл бұрын

Chris which clear do you like better? The Upol or the Finish 1 FC720

@GarageNoise Жыл бұрын

I perfer the upol just because I usually buff the next day if it needs it and the finish1 is still a little soft the next day it will buff out but it takes longer. Both are great tho.

@dennish9519 Жыл бұрын

What regulator were you using on that paint gun? I like the digital gauge. My current gauge is a little foggy due to cleaning the gun and the gauge has a plastic face!

@GarageNoise Жыл бұрын

That is a harbor freight air gauge.

@luisdiaz9142 Жыл бұрын

@@GarageNoise I havent had luck with the harbor freight digitals. Ive had to return 2 of them 🤦🏻so i ended up getting the analog one instead

@GarageNoise Жыл бұрын

@@luisdiaz9142 yeah, I had to return one as well. I have like three of them. Sagola makes a great one for $50

@S197jet 7 ай бұрын

I have seen other videos adjusting the psi and they set at 20-30psi is there a reason why you would set at 15 psi?

@GarageNoise 7 ай бұрын

It's all personal preference. For base you want it a bit lower 15-25 for clear generally 28-30 depending on gun and type of clear your using. I will adjust my base coat pressure according to temp and color high metallics I perfer the air pressure a bit lower for metallic orientation.

@harrydemetro1935 Жыл бұрын

Can this be used with something like a 6 gallon or should I just stick with rattle can

@GarageNoise Жыл бұрын

You need a compressor that produces at minimum 6 cfm's of air.

@kseries20-24only Жыл бұрын

@Garage Noise it sounds like you've been using these lower CFM guns for a while now, do they keep working upon cleanup just as well? In fact, could you do a video on cleaning your guns? My brother and I have this debate because he doesn't break them down saying it's bad for the tip, he just fills the cup with lacquer thinner and sprays it out a couple of times where I break them down and try to clean the tips and pieces. 🤷 What is your experience in this area?

@GarageNoise Жыл бұрын

I break them down when I need to. Usually when it's not spraying right🤣. About once a month i break them all the way down. Otherwise a quick clean does well. It doesn't hurt anything tho break them down and clean tho.

@kseries20-24only Жыл бұрын

@@GarageNoise thanks brotha 🙏

@jimfeaster4837 Жыл бұрын

Thank you... Do a video with duplicolor please...

@GarageNoise Жыл бұрын

Will do! I'm planning a few videos using only Aerosol can for the diy guys!

@Archeydec Жыл бұрын

is the paint gun better then the little astro gun? clear looks good

@GarageNoise Жыл бұрын

It's as good as the astro. The astro is a great gun but this is more versatile since it uses less air. Both spray great tho. Appreciate the comment and support!

@ripkobexnip3719 7 ай бұрын

Hi I bought a 27 gallon fortress compressor will it be enough for a bumber or a hood I bought a 80$ harbor freight paint gun

@GarageNoise 7 ай бұрын

Should be, I don't know what gun you bought tho. Some of those hf gun use alot of air.

@ripkobexnip3719 7 ай бұрын

@@GarageNoise I got the black widow from harbor forgot 11.8cfm @35 psi gun is 14 to 35 psi input have another gun central pneumatic 15 cfm @ 40 psi honestly ima return my 27 compresser and get a 60 gallon I should be good with a 60 galllon rite dewalt 3.7 hp 155 max psi 13.4scfm at 40psi and 11.5 scfm at 90 psi I don’t wanna risk the small 27 gal ima upgrade to a 60 gal

@idronecharpifpv89 10 ай бұрын

I have a question.... while you are letting the paint flash do you remove the paint from the gun? or can you leave it there?

@GarageNoise 10 ай бұрын

No need to remove the paint from the gun. Until your done with the project. Appreciate your support!

@danielking5749 9 ай бұрын

Hi I’ve just been given a compressor to use to spray my van and it’s got 1.5hp / 6L / 115psi / CFM 7 / FAD 4.5 is the compressor ideal for this spray gun you’re using? Cheers

@GarageNoise 9 ай бұрын

It will work, may have some air fluctuations if painting multiple panel or a full car but should get the job done.

@danielking5749 9 ай бұрын

@@GarageNoise yeah i think I may just buy a bigger air compressor like a 50ltr😂 thanks for the reply

@ANDY-we7mr Жыл бұрын

Nice video 📹 Chris hope you're OK and well aren't you going to used a wet bed on there Chris so it blend in with the car

@GarageNoise Жыл бұрын

Not on this one because for one it's black and it's not a problem blending black. It's also not hot . I mainly use a wet bed on extremely hot days or tough colors or metallics like silver or gold. Good question, appreciate the comment and support!

@madbazRC Жыл бұрын

I’ve been looking at a compressor that’s is 50litres with 14.5cfm would this be acceptable? Many thanks

@GarageNoise Жыл бұрын

That would work great! Appreciate your comment and support!

@madbazRC Жыл бұрын

@@GarageNoise thanks for the reply great videos they are helping a lot with setting up my home garage. 👍

@GarageNoise Жыл бұрын

@@madbazRC appreciate your support!

@NicholasGeer Жыл бұрын

With the LVLP gun, how much clear are you using on each panel?

@GarageNoise Жыл бұрын

Roughly about 6oz

@daviddickmeyer5231 Жыл бұрын

It seems like ther was a lot of overspray with this gun. Do you know of one that will produce less overspray? Thanks

@GarageNoise Жыл бұрын

It may of seemed like it but it truly produces much less overspray than any other gun on the market.

@daviddickmeyer5231 Жыл бұрын

@@GarageNoise OK, Thanks

@chauffeurmarco Жыл бұрын

Me I just want a gun for small job, like motorcycle fender. Not the entire fender but rader deep scratch so you understand what i'm saying. it's once and a while little job. So i'm not looking for hundreds of dollar gun. What gun should I buy for my needs?n I have a 8 gal thank, 1.5HP, max pressure 135

@GarageNoise Жыл бұрын

You may want to cosider a good touch up gun astro makes a good one.

@chauffeurmarco Жыл бұрын

@@GarageNoise thanks. Astro gun will be

@marty3553 3 ай бұрын

What needle size and can this gun spray solvent paint????

@GarageNoise 3 ай бұрын

1.3 and yes it can

@SLIBOLARDIST Жыл бұрын

What do use to mix the paint base coat with??

@GarageNoise Жыл бұрын

Not sure what you mean?

@robkipa 17 күн бұрын

How do you manage to get 30psi at the gun while spraying, especially with the added bulb filter? On mine I'm lucky to get 25psi regulated if I send the full 110psi of tank pressure (20gal/2HP), using 25ft of 3/8" line. I do have a wall-mounted oil+moisture filter in the way, but still...

@GarageNoise 17 күн бұрын

Make sure the air adjustment knob on the bottom of the gun is open allrhe way.

@robkipa 15 күн бұрын

@@GarageNoise Thanks, it was already open. It ended up being the cheap regulator I had on it. I overnighted the same square blue digital type I saw on yours and that fixed it!

@GarageNoise 15 күн бұрын

@@robkipa 👍

@fluorescentmug8333 2 ай бұрын

eastwood lt100 is currently on sale for 64.97$

@GarageNoise 2 ай бұрын

👍

@carlo127 Жыл бұрын

💪💪💪have you tried the clear 2:1 with this gun?

@GarageNoise Жыл бұрын

No, I'll have to test it.

@chris01479 Жыл бұрын

What air compressor do you use and how many cfm??

@GarageNoise Жыл бұрын

My compressor is a ingersoll rand that produces 16 cfm at 90 psi

@67cudaksa34 Жыл бұрын

what do you think on using this gun with single stage paint

@GarageNoise Жыл бұрын

I think this gun would do just fine. I don't shoot a lot of single stage these days but have in the past with guns that are similar with no problem. Appreciate the comment and support!

@Keepin-it-wheel101 Жыл бұрын

Do you think the kiwami4 is the same or similar to the R500? I cant make a decision which one is best for clear coat?

@GarageNoise Жыл бұрын

Kiwami is a different gun for sure. Kiwami 4 I feel is a better clear gun but I hesitate because you may like the r500 better and you my have concerns with air consumption. The r500 is less money.

@Keepin-it-wheel101 Жыл бұрын

@@GarageNoise I think th r500 is best for me, my compressor is 26 gallons, base on that limitation I might have to go for the R500. I really like the kiwami4 everyone says is good...

@eddiejones8339 Жыл бұрын

I have both guns, the kiwami lays down clear really well but that R500?? For the price, air consumption and how it lays down clear it can't be beat.

@Keepin-it-wheel101 Жыл бұрын

@@eddiejones8339 I may have to get both.. One for clear coat one for base color.

@eddiejones8339 Жыл бұрын

@Daniel Medrano I use my astro HE for base coat. I have a brand new one sitting in the box waiting to replace it. That Kiwami 4 lasted a year just spraying clear. I bought 2 at the same time. The second one is still in the box. The R500 I've used twice and it laid down the clear very well and was 65.00 that Kiwami4 was 187.00. Could buy 3 R500's for the price of the Kiwami just saying.

@yoofaceee514 10 ай бұрын

I have a 4.5 gal 5.1 cmf air tank would I be able to paint a hood with this gun

@joaquin0023 6 ай бұрын

Did you end up painting the hood?

@yoofaceee514 6 ай бұрын

@@joaquin0023 yess I did bro turned out really good

@joehiatt1992 9 ай бұрын

How much paint in a 2 stage base,clear would it take to paint a hayabusa ?

@GarageNoise 9 ай бұрын

Depends on the color and paint line but a quart will get it done.

@joehiatt1992 9 ай бұрын

@@GarageNoise Thanx, what I was thinking.

@joenmass 2 ай бұрын

I think the air consumption is way overstated and wrong on these types of spray guns. I use a Husky air compressor rated at 4.5 gpm and these guns based on the R500 no way uses just 3.5 to 4 per minute. Another KZfaqr said these guns actually use 7.5 to 8 gpm of air. That explains why I can’t get a constant flow of spray paint for any considerable amount of time. Would be nice to have an episode on actual air consumption is compaired to what the manufacturers claim it is.

@GarageNoise 2 ай бұрын

I think your right. I believe these guns are around 7-10 as well. The orig R500 is on the low end on that number tho

@israel9294 9 ай бұрын

Can you use this clear coat to paint an entire car? Why does is say for spot panels?

@GarageNoise 9 ай бұрын

Yes, you could but they have an overall clear as well. The overall dries a bit slower for more working time. Here's a link amzn.to/3RYRkMb