🤣🤣🤣👏

😂😂🤣🤣

Wish I'd have seen this bit of the video before I went out and bought 14 broom handles to make a step ladder out of.

@@anttherubbishdrummer.8513 damn you too?

Yep👍

You are awesome, I kept all my naps covered in bags and they lasted a week until I got off work and was able to paint some more again , thanks for the tip

Bisogna

What’s TSP?

@@slimdougmaddox4634 Trisodium Phosphate. Very good cleaner and cheap

If I saw any of my painting team do this, I'd have words

@@garethtichauer5153 Do what? remove the plates or use foil. The guy I painted for owned one of the top painting companies in our area and people were always very happy with his work. He always went above and beyond to do the little extras.

You clearly know how to read and write so don’t feel too bad about yourself Orta.

😅

6

Everybody 🙄

That guy in video never painted room all his gadgests are just LMFAO exept that drill cleaning

Si, es cierto y más rápido

Cheaper/ faster if everything goes according to plan... in old buildings outlets/ switches might have loose parts inside, worn-out screws, 70 year old insulation that will crumble, maybe even aluminium wires that break... or improperly (too much) removed insulation, so to avoid a short or shock best to turn breakers off... then you need to manage lights and extension cords.

BiIixkxkxnn

That aluminum foil is more work than removing the wall plate.

Tajemnice malarskie wyszły na jaw. Cała budowlanka teraz pierdolnie, kryzys.

obviously this dude is not in USA my friend. Did you looked at the outlets ? europe or southamerica

It was bad A broom handle was a killer Foil around a socket just looking for a shock The paint brush I would throw away after use All in all a cheap and lazy painter

100 per cent agree with everything you said, saved me writing all that

agreed , 30 year plumber turned handyman and ive taught myself , w help , everything u said ... i dont know what a wooster pole is but i use the one that came with this spider web mop duster thing i got for $9 ... never again w the webs , but im not tsp the whole house either

уже до художников добрались.ещё немного и гинекологи не хотят шоб вы это знали или работники морга не хотят шоб вы это знали😆😆😆

Any REAL painter has a 5 in one in his pocket... they all have that "brilliant" roller scraper already built in to the tool..lmao

@@ericjennings2508 It doesn't matter, those "cleaners" will not remove all the paint, and you'll be cleaning for an hour, all the while running water over the roller cover.

@@davidg.4911 No SHIT!.. all I'm saying is that a REAL painter would just properly clean his gear when he's done. It takes NO WHERE an hour, and hardly 5 gallons to get a roller PERFECTLY clean with a good nozzle and an empty bucket.. SOURCE: 22 years of doing it!

You can squeeze paint from a roller for hours, especially after using it all day and they're saturated with paint. Either you throw it away or let it soak and continue to try to get the paint out. At around 3-4 bucks apiece, it's simply not worth the effort it takes to clean them. However, the idea of using centrifugal force to clean is seems like a great idea. The only problem is attaching it to the drill.

0plaadbare

Having lived in Germany, this doesn’t work the same way as American electric switch, outlet, internet, or cable plates! They for one (in Germany) operate on 220 volt systems, and 50 Hertz or Cycles. The outlets have been made so that they can be inserted into wet Plaster, and to remove them is a lot more work and can damage the wall area around the outlet! Then that leads to more repairs than you could have imagined. The fact that you have to hire a Licensed electrician, licensed plumber, licensed interior design specialist, licensed painter, and several more for interior home work, becomes extremely cost inhibitive! Fact you move into an Apartment or home, you have to bring your own kitchen cabinetry and many more things, that we expect to be part of the household when we buy it or rent it! And there are some contracts for any rental property that tell you even who you can hire to do the home improvements. Painting and Wall papering are still something that you can do without much pain, as long as you are not pounding a nail in your wall or removing outlet covers... Once at my In-laws house they were having some work done to install some outlets and switches on the wall of their kitchen just inside of the door. (where we would naturally put them here) I would expected to see for example a 3” wide cut out in the wall from the ceiling down to the outlet level 16”-18” above the floor, then across at that level to the door framing and up to the normal switch height and a box installed on the inside of the wall fastened to the inside of the door frame with some “Sleepers” to support the Drywall when it was all done you would never know that say 20’ x3” was carved out. There in this case, a chiseled passage was diagonally cut in the Face from the Ceiling to the switch and outlet! Hey it’s rock and plaster on the face... and the houses are built to stand up for 150+ years! Look at the houses that were destroyed in Ukraine the roofs are supported by Wood frameworks the rest of the houses are made of stone plaster, fiber blocks are new, like a cinder block but light and structurally strong. But I guess my point is almost lost already. The best tricks of the trade may not apply here, but they are still great ideas for overseas or in alternative building practices, to our own wood houses...

@@andrewostrelczuk406 Point taken. I guess I should have noticed the unusual (to a north american electrician) outlets and devices in that box :p

@@s3tione Hey My Dad was a Journeyman Sparky, after the Army I tried to explain it to him too. 38 years with Detroit PS and 3 years out the Local 58 IBEW he was an A- Member, WWII & Korean Vet. Left me with a lot of Knowledge! Sadly he has passed away more years ago than it seems.

Even without removable plates, there is no need to tape those off ( or foil them..lol)..if you can't cut that in cleanly with a decent brush, you should probably not be painting anyways.

Why squeeze the paint into a plastic bag? Surely better to use it up or wash the brush out

Me ahorraste el comentario

Also vacuum out the back /mounting box at the same time.Cleanliness and prep are important.

How about spending some money on a decent brush

silver foil on electric's yer right, unscrew it and lift it off the surface a bit is better

With a brush.

Ага. А ещё проще,снять накладку. Легко и просто.

Zum Glück sieht das noch so jemand

Yeah. What a lucky coincidence that paint rollers have hollow handles that just happen to be the perfect size to put a stick in.🤦‍♂️