Painting & Bracing the Turbo Drift Trike

Рет қаралды 197,294

8 жыл бұрын

Make sure to download Garage Amino at the below links to view our exclusive Predator 420cc governor removal video!
Garage Amino for iOS: apple.co/1pJ66pI
Garage Amino for Android: bit.ly/1S22iJo
Our Garage Amino username: CarsandCameras
This time, we brace the trike for more structural rigidity, we do a wire tuck to clean it up, and we finally paint it blue! Our 420cc turbo drift trike should be ready for some awesome 40mph drifting if we only had a good place to ride. We'll find a place one day. EFI coming up next!
Thanks for Watching!
Go Power Sports Website: bit.ly/3QKyODE
1" Clutch: bit.ly/3QpvKgo
Drifter Live Axle Kit: bit.ly/3Qq1fXJ
Like CarsandCameras on Facebook: / carsandcamerasreviews
Follow CarsandCameras on Instagram @CarsandCamerasReviews The following video features activities performed in controlled environments by knowledgeable persons. DO NOT attempt to duplicate, re-create, or perform the same or similar activities at home, as personal injury or property damage may result. CARS AND CAMERAS, the persons shown in this video and ANY CONTRIBUTOR, ARE NOT LIABLE FOR ANY such injury or damage. ALL CARSANDCAMERAS CONTENT IS FOR ENTERTAINMENT PURPOSES ONLY.
Cars and Cameras makes no representation about the sufficiency of any safety precautions and equipment used in this video.

Пікірлер: 664

@LouSpowells 8 жыл бұрын

What do you mean you, "Can build another trike." You've got a spare Ike too.

@TheSchwaehn 8 жыл бұрын

+Lou Spowells ayyyyy

@oke215 8 жыл бұрын

make a monstertruck go-kart that would be really awsome

@manuelriemens3366 8 жыл бұрын

yessss plssss

@superdrizzle7342 8 жыл бұрын

+luc snippe An atv w a predator engine would be cool.

@FreeUpTheWeed 8 жыл бұрын

With suspension would be cool,a crawler haha. I'm sure forks from a mountain bike could work. Just cut and make them a bit wider to fit wider wheels in and re-weld with some decent gussets.

@JohnwayneSBL 8 жыл бұрын

+Adam Loer grab a chinese kids atv and use the suspension from that, hack away and boom there ya go. could even find a beat up tav with a bigger engine and use that. perfect for a single seater

@TheBrokenLife 8 жыл бұрын

Fearless Front is building that exact thing right now.

@Tvillright 8 жыл бұрын

7:42 just me who thought the handle of the Drift trike looked like the exhaust on the Honda? xD

@dylangxlrsm2212 8 жыл бұрын

that's creepy, I thought that too!!!!

@brandongrkman593 8 жыл бұрын

Hahaha

@adrianszugye5929 8 жыл бұрын

I thought that too

@Pollex_101 8 жыл бұрын

I did too

@jacobevans2300 8 жыл бұрын

Hahaha

@DerKrawallkeks 8 жыл бұрын

Oh, a little trick I did with the same problem of fuel being pushed back out (i know you'll install EFI, but just incase) I connected the overflow (-hose in my case) to the pressurized part of the intake (basically right next to the carb). This will pressurize the float bulb whenever you have boost, therefore you'll have a nice mixture and no leaks (in my case is was that easy, but no guarantee;) And.. yes, you can't run full power for more than 20 seconds because the pressure closes the float-valve...

@SnapPunchRobert 8 жыл бұрын

Great episode. Scary fast drifts there near the end. Looking forward to the EFI.

@seanhornibrook 8 жыл бұрын

That is so awesome. That blue turned out like perfect. Looks like some sort of drifty thing.

@whitecloudgroovin2005 8 жыл бұрын

Looks down right fun. That skinny road tho- another trick build guys. Thanks

@3DMachines 8 жыл бұрын

Coming to a Toys R Us Near you!

@motofriend7056 8 жыл бұрын

3d your the best bro

@brandongrkman593 8 жыл бұрын

Bruhhhhh

@magzillavlogs8086 8 жыл бұрын

i ❤ you 3dmachines

@jacobahlfs1371 8 жыл бұрын

You r everywhere Roman Atwood Cassie niestat

@codymills165 8 жыл бұрын

3d machine keep ur videos up

@VochoTalacha 8 жыл бұрын

On the foot rests on the pegs, put some handlebar rubber grips or something, just to add more aesthetics and a lil grip on the feet. You guys should definitely install a rear disc brake kit to be operated either by foot on the pegs or by hand on the left side of the handlebar

@2cwik4u104 8 жыл бұрын

another awesome vid. the paint came out cool with the exposed metal.

@shinigami1315 8 жыл бұрын

Niiice! I've been waiting on an update on the drift trike. Love the vids keep it up guys

@learninganddiy4954 8 жыл бұрын

Nice work! Looks fun and I like what you did with the gussets ;) Can't wait to see what you do next.

@isaacitllbefine7231 8 жыл бұрын

+Learning and DIY thanks

@dl-so9jj 8 жыл бұрын

you guys are heading in the right direction you guys are gonna blow up soon, great job

@Levi-Willis 8 жыл бұрын

Hey Issac, the pressurized air box idea could work, but you would need a fuel pump pushing fuel to the carb at the same time. If you didn't there would be no way for the fuel in the tank to make it to the carb. You'd likely blow air from the turbo into the fuel tank as the float dropped. Cool build guys!

@andre1884 8 жыл бұрын

Great job guys!! Ive been watching you guys from the beginning! keep it going, and get a Turbo on that 670!!! DRIFT KART!! haha

@ryanB66 8 жыл бұрын

that paint job is AWESOME

@fcknsick 8 жыл бұрын

I'm excited for more 670 videos. More power!

@Pdhutchi 8 жыл бұрын

It's crazy how this channel has developed, these videos keep getting better in my opinion. The content has always been great but the editing, talking points, and presentation has improved a ton. Congrats guys, keep churning out awesome videos!

@isaacitllbefine7231 8 жыл бұрын

+Paul Hutchinson thanks

@stephentroyer3831 8 жыл бұрын

blue looks great on that trike.

@rowanbauschard7609 8 жыл бұрын

I want to meet you guys so bad, and i love your videos, keep up the good work It'll be fine!

@mr.clutchlol 8 жыл бұрын

Damn Ike !!! Back at it again with the gnarly drifts 😂😍😍 this episode was great !

@isaacitllbefine7231 8 жыл бұрын

+Mr. Clutch lol thanks

@jaimel4740 8 жыл бұрын

great job looks good keep it up. my son and I are working on a shopping cart go cart .

@wisdom-human3126 8 жыл бұрын

GOOD JOB GUYS..TRIKE LOOKS GREAT

@isaacitllbefine7231 8 жыл бұрын

+LESLEY 420 thanks

@joshsimmons2663 4 жыл бұрын

I love it. This makes me want to take this old mountain bike and homemade kart at home and make one.

@davidsuzuki5209 8 жыл бұрын

Love the blue, also for a next project, I think a 670 "mini" bike would be epic, can't wait to see how the efi does on this, keep it up 👍

@S13Egg 8 жыл бұрын

What a crazy build!

@jeffland1007 8 жыл бұрын

ike I love the ideal of putting the pully for the alternator on the axle that's pure genius brother looks awesome can't wait for the efi I'd like to see a top speed run with put the PVC on the tires it would go faster without all that wheel spin

@dylanvincent8993 8 жыл бұрын

awesome man looks great

@JamieKugelmann 8 жыл бұрын

And as for the flywheel magnet, grab a normal bar magnet with North and South poles on opposite ends. There is a magnet on the flywheel (normally held in by epoxy with a screw visible on the top), it has a small gap either side of it. Put the north side of your magnet on the whole length of the flywheel magnet, if it attracts to nearly the whole magnet then the flywheel is a south pole magnet and you'll need a south pole Hall effect sensor for the EFI. If it repels, try putting the south pole of your magnet on the flywheel magnet, if it attracts nearly all of the flywheel's magnet then the flywheel is a north pole, if it repels it's south. Hope this helps!

@VeeDubP8 8 жыл бұрын

Hell yes! Nice work.

@jasongriffin8849 8 жыл бұрын

Turning out great! I would definitely do something to make those foot rest safer.

@wilberado 8 жыл бұрын

If you have any satin black left over you should paint that seat. Can't wait to see that EFI kit though!

@hooviedoovie5220 8 жыл бұрын

the mantra of this channel... "it'll be fine"

@mattb.5103 8 жыл бұрын

Love your guys vids. Trike is killer, gray sweat pants w/hole... Not so much! LoL 😆

@MJNSN01 8 жыл бұрын

the blue is nice and the trike too

@diavo009 8 жыл бұрын

CANT WAIT FOR EFI!!

@SquidWithGear 8 жыл бұрын

Looks like sooooo much fun :D

@nathansharp2004 8 жыл бұрын

loveing that blue

@michaelmavro 8 жыл бұрын

very good video guys great job

@Mx2J 8 жыл бұрын

should get some handlebar grips for the foot pegs so you have a little bit more sturdy foot pegs. :) might be a little more comfortable for your feet too

@Orbacron 7 жыл бұрын

im thinking that this turbo on the 670cc attached to a manual transmission of a fiberglass kit car or motorcycle would be an excellent build. any suggestions? it would have enough horsepower to be fun. possibly a gutted ford fiesta or something super light weight?

@cryban7011 8 жыл бұрын

cooool paintjob.

@jordinmichael3298 8 жыл бұрын

That thing must be so fun

@902isfake 8 жыл бұрын

I actually just removed the governor from my Honda gx340 (predator 420) your vid helped a lot

@isaacitllbefine7231 8 жыл бұрын

+b00st cool

@alexsayers6979 8 жыл бұрын

wow your cart looks a lot better now. Need to get a Pyrometer for carb tuning

@MrJcoupe96 8 жыл бұрын

Great Job guys, its coming along great and looks like loads of fun! Just a recommendation, maybe you want to wrap those foot pegs with some grip tape to help keep your foot from sliding off the smooth paint if your shoe were to ever get wet on the underside.

@tomhuest1300 8 жыл бұрын

Can't wait until you guys get the EFI hooked up and running awesome :-) :-) :-) :-) :-) :-)

@MacroMachines 8 жыл бұрын

I've been wanting to do a trike like that with a rear lawn mower wheel as the front wheel, or something stupidly big like that

@Addimotive 8 жыл бұрын

Hey! You used the metal cast spray paint I suggested after using it on my kart! Whether or not my comment actually influenced your guys' choice, it still makes me feel good haha

@TonyFleetwood 8 жыл бұрын

its like a 64 impala man, X frame :) also blue was a great choice!

@dylanobyrne4142 8 жыл бұрын

Great job you guys

@isaacitllbefine7231 8 жыл бұрын

+Wake me up Inside thanks

@Yohosun 4 жыл бұрын

Billy crystal and will Ferrell that’s a nice paint job 🎨

@graesoncritchlow6884 8 жыл бұрын

good vid keep it coming

@SpentBrassAdventures 8 жыл бұрын

Great job guys.

@isaacitllbefine7231 8 жыл бұрын

+Ethan Swapp thanks

@sittinheavy1 8 жыл бұрын

Are you guys going to use a wideband to monitor AFR's. I don't see how self tuning can work without one. If you get a wideband, I can tune it via Team Viewer.

@Paxmax 8 жыл бұрын

Some people don't like the "ya'lls" and southern expressions but I think it's really comforting and family friendly.

@isaacitllbefine7231 8 жыл бұрын

+Paxmax thanks

@MrTheHillfolk 8 жыл бұрын

18:05 Why's it running so good ? Cause it's about to blow up, they always do that 😂

@JamieKugelmann 8 жыл бұрын

Don't forget when you install the EFI that you'll need a longer exit exhaust system from the turbo onwards so that the oxygen sensor works properly. I find if you place the oxygen sensor just after the turbo exhaust outlet it will get heated to at least 300c which is perfect for the sensor's requirements. Placing it between the engine's exhaust and the turbo inlet will make it too hot, and also restrict the flow of exhaust. Let me know if you need any help setting it all up.

@tylerlewis7984 8 жыл бұрын

brushed silver rims would look Awesome!!

@jayholt2101 8 жыл бұрын

I just found your channel. I love it! I wanna build something like this. I don't have that much money to throw at it and i don't have a welder or hell anything yet. I took a look at the axle kit you guys are running. MMM I kind of wanna do the whole build for that much. Maybe I can't :(. I will just have to look around junk parts and clean then up. Love what you guys do and keep it up. Id love to see you do some high speed drifting. It will be fine.

@isaacitllbefine7231 8 жыл бұрын

thanks

@meade816 8 жыл бұрын

Can't wait to see what EFI system you have and how it will work on a small motor. That said if you guys were working on a budget I would recommend MegaSquirt pretty much DIY EFI system without the self learning. Maybe one day someone will release a MegaSquirt that can self tune.

@kingofmodelrailways4040 8 жыл бұрын

can't wait for EFI Ike

@forrestkirkendall4048 8 жыл бұрын

You guys should do a hemi vs non hemi predator 212 comparison. In both parts/hardware but also performance.

@81chowder 8 жыл бұрын

Great job men!

@isaacitllbefine7231 8 жыл бұрын

+Scott Lester thanks

@audictedb6466 8 жыл бұрын

Shifter kart next

@Oneshotup 8 жыл бұрын

gawd yes!

@gt1man931 8 жыл бұрын

+stupid rc studio With their fab skills, they'd probably hurt themselves.

@Pdhutchi 8 жыл бұрын

It would also be cool to see a shed update every once in a while. Not necessarily a whole video but a quick update would be interesting. Maybe you all could paint it with a CarsandCameras theme. And drop some wood chips or gravel on the swampy area in front.

@evilpuppyjdm2702 8 жыл бұрын

I think you guys should build a racing lawn mower.love the vids keep it up

@TrulyUnfortunate 8 жыл бұрын

Are the foot pegs the same diameter as a pair of handlebars? Some grips on em would be pretty cool.

@S13Egg 8 жыл бұрын

Put Blow Off valve on it :D

@chrisw9451 8 жыл бұрын

Looks great guys, good work. How hard would a waste gate be to home make, because you are killing me with the key thing lol?

@RobMccloud3 8 жыл бұрын

Amazing job guys. Can't wait to see more videos. Definitely a better idea on the charging system. And I was wondering can't you drift without the (pvc) on the tires? Keep up the great work.

@RobMccloud3 8 жыл бұрын

can *

@DappieKS80 8 жыл бұрын

Nice! Just a suggestion, put some handle bar grips on the foot pegs.

@nocouponsforkaren8587 8 жыл бұрын

I've been trying to figure out how to use a mower engine I was given can you make a vertical drive to horizontal guide.

@crazyivan512 8 жыл бұрын

Well done guys ^5

@didierneeferc 8 жыл бұрын

Its AWESOME

@mat6179 8 жыл бұрын

And it will save you alot of money lol but I feel a 3 inch long intake would be a good place to start

@yammieboost4714 8 жыл бұрын

considering its carbed theres probable not a hall sensor, what you can do is add a 36-1 pickup wheel (pretty much the standard) and it should work fine

@RastaRider 8 жыл бұрын

I've been thinking about declaring a King of the Hill reference.. Based on homie's voice. But I just know it had to have been posted a bunch already lol. And yet here it is.

@stephentroyer3831 8 жыл бұрын

So, is there a run coming up with the PVC removed for maximum speed and safety?

@thatscooterdude129 8 жыл бұрын

I LOVE EFI

@dylangxlrsm2212 8 жыл бұрын

You should definitely make a gokart with body a body kit and side, exhaust....or something on the lines of that would look amazing and different

@sketchgarage9463 8 жыл бұрын

you guys are awsome

@isaacitllbefine7231 8 жыл бұрын

+rhy roo thanks

@jeremyhammond2862 8 жыл бұрын

Should have painted the seat matte black as well but looks good now I want to build one

@olivierbeucken6671 8 жыл бұрын

Than a blow off valve would be a good idea. Now you have a draw through turbo setup. You can only place a blow off valve on a blow through turbo setup as far as i know.

@redneckbryon 8 жыл бұрын

What you could do is use a GM alternator to charge it while your driving and use the stock charging system to keep it charging while the engine is running, no drain on the engine and your always charging. Idea, hide the throttle cable in the same method you did to the wiring harness it would help clean up the frame a lot and there's no risk of getting it caught on anything while your driving.

@zenkyu3578 8 жыл бұрын

More drift ! :D

@Johnathan0055 8 жыл бұрын

I've been trying to find a good video on how to put a key start on a predator 212 for my mini bike...so it will be easy for my son to start.. Maybe y'all can go over that one day..it would help out thanks!

@Cali_B51 8 жыл бұрын

love the trike

@isaacitllbefine7231 8 жыл бұрын

+Calvin Bouvier thanks

@wabash9000 8 жыл бұрын

You should take the seat plastic off and either paint it matte black or dye it black with some rit dye.

@CIBERXGAMES 8 жыл бұрын

I think the next build you guys should do is a very powerful electric go-kart. That would be amazing!

@thundercamel 8 жыл бұрын

11:40 "Dang it, Bobby!" - Hank Hill.

@sabrom 8 жыл бұрын

Take the sliders off the rear wheels for tuning purposes and you might even pick up a few MPH that's scary with trees on both sides of ya going 40mph face first...lol