How to Paint Silver with NO STRIPES!
Рет қаралды 56,184
2 жыл бұрынOn this Episode we show you the steps of nailing down a beautiful Silver Metallic Paint job as Pedro from Scorpion Paint and I restore this once wrecked Maserati If you're struggling with spraying silver then in this video you will learn professional grade tricks along the way to turn those splotchy silver jobs into beautiful factory looking paint jobs!
Make sure to follow Pedro who helped us out greatly in getting our project painted! Scorpion Paint: @scorpionpaint
🟢CHECK OUT OUR ONLINE STORE🟢
www.amazon.com/shop/paintsociety
🔺SHOP ALL Exclusive Products found on our KZfaq channel for your project! 🔺
***To share your project or ask questions please join our facebook group: / 440942309941585
***Instagram: paint.society
Cleaners:
Prep Cleaner: amzn.to/3u9BlgF
Water Based Clesner: amzn.to/3N6wZzj
Additive:
Clear basecoat Part A: amzn.to/3LikOxJ
Clear basecoat reducer Part B: amzn.to/35dPTDk
Paint Guns:
Walcom BASE or CLEAR: motivatedpainters.com/collect...
Tape and Paper:
3M Yellow Tape: amzn.to/3wDs839
3M White Masking Paper: amzn.to/3wDs839
Tack Rag: amzn.to/36SzHI3
@scorpionpaint 2 жыл бұрын
Thank you my brother for this amazing video and for having helped me in the painting of this project, the whole video was in detail, the car came out very nice, It’s always a pleasure to share with you in the videos, we had a lot of fun. Thank you 💪
@PaintSociety 2 жыл бұрын
Follow this guy ☝🏻☝🏻☝🏻☝🏻
@dinnyjohnson4088 2 жыл бұрын
You guys make a great team
@donpaluch4488 2 жыл бұрын
I finished painting my car after watching a ton of your videos, and it came out great. But now I am addicted and keep watching them because they are just so damned good!
@ronmiller1162 2 жыл бұрын
i painted busses for a couple years and in that time i painted a few custom jobs that took a week to get all of the art work on the bus so at the end of every night i would bury the color under three heavy coats of ppg dbc 500 colorless basecoat just so i had confidence that no one would touch the color while i was catching up on my rest and one thing better is in the end its easy to bury heavy lines if you use this product every day for as long as it takes to finish your multi colored art or stripes i also would da with 800 on a hard pad just to knock the hard edges down every morning
@michaelb7071 2 жыл бұрын
Thanks! About to do my first paint job on some panels in silver. Very helpful information!
@marioivanisevic1708 2 жыл бұрын
How did that go?
@philtucker1224 2 жыл бұрын
Hi Brian and Pedro, once again I learnt a great deal watching you. Thank you so much.🙏
@laskothuglife9581 2 жыл бұрын
Wow !!! Beautiful job
@SDRacing88 2 жыл бұрын
Ahhh yes, some of the missing points ive needed to hear for years!!! Beautiful job!
@mrerenjv9123 2 жыл бұрын
Thanks man I just learned from watching you how to blend silvers cars, I really appreciate it
@AB-C1 2 жыл бұрын
Brilliant video guys! Thanks from London England 👍😎🏴
@markbarton4344 2 жыл бұрын
Great stuff, turned out great!
@brandonproctor9028 2 жыл бұрын
I’m usually a critic on a lot of KZfaq videos cause people just do some terrible stuff, but this is genuinely a great job. I’m personally not a fan of cutting in and putting on the car I’d rather paint it all apart for no tape lines etc, but all in all this is a great job and a great video an content keep up the good work!
@kimojoseph8057 2 жыл бұрын
Awesome 👏 video Brian and that was a fantastic job thanks for all those tips and tricks on that job haha 🤣 I really enjoyed that video it was amazing and scorpion 🦂 show those guys how to put it on lol 😂 the end result was spot on much love to you and scorpion enjoy your Sunday 👍👍👍👍🙏🙏🙏🙏💯💯💯💯🔐🔐🔐✊😎👏
@jonbeepath4943 8 ай бұрын
Truly appreciate your videos Bro. Thank you
@GarageNoise 2 жыл бұрын
So many great tips it this video! Nice work!
@cyclesportservices3323 2 жыл бұрын
Love it, thanks for the info
@timwest9300 2 жыл бұрын
Beautiful
@geoffreycartmill7717 2 жыл бұрын
Great video. Great car also
@87bjackson 2 жыл бұрын
Those guns are amazing, like works of art.
@juliojreyes6234 2 жыл бұрын
I like the flat silver look before the clear.
@IzziedeD 2 жыл бұрын
yeah the matte silver look is nice. looks like aluminum of something. I think the best way to achieve that is to have a nice smooth, polished paint job, then do a matte silver vinyl wrap. Matte paint will look terrible after it takes any wear.
@haha-gu2vz 2 жыл бұрын
Yes it as happen to me where I forget to put hardner in the second patch to spray the second coat I did spray hardner over the car and surprising it worked(sherwin williams)
@dawidp351 2 жыл бұрын
Amazing job. Greetings from Poland guys :)
@JohnSmith-rb5um 2 жыл бұрын
In trade school I put reducer in the clear instead of hardener my instructor took straight hardener and hammered over the top of it and it did set up lol it died back hard and we gave it a couple days and cut it down and buffed it and it looked fine lol I would hate to see what it looks like today I guess it’s good I learned that lesson in school instead of on the job😂 sometimes I think I’ve made every painting mistake possible and then another one comes along
@flokijhdfjkvnhsdfjkl 2 жыл бұрын
Awesome video u-2
@laskothuglife9581 2 жыл бұрын
Learned alot
@Ohshiitsdatboi 2 ай бұрын
Can you do a video about job opportunities and a career in automotive paint. I’m still a beginner painter, but I think my jobs and colors come out clean and I put pride in my work. Only sprayed one paint line at one shop for roughly 3 years. And at this point I feel like I’m being taken advantage pay wise. But don’t know what else is out there
@GrandPitoVic 2 жыл бұрын
Looks great. Thank you for the content brother. 🙏. I am learning quite a few things. I love a silver car. Especially when there is black to break up too much silver. Plain Jane silver is just boring. But I like it toned down with black. Black grill, black rims, black accents on the mirrors. Maybe even a black pinstripe. Maybe. Lol. Thank you for showing the silver. I have a 03' Crown Vic Police Interceptor I am thinking about silver with black mirrors,rims and black straps on the lower sides similar to the mustangs but not the same. I was also thinking about skin black on the center portion of the hood. In 84' or 85' the mustang gt came with the satin black on the center portion of the hood but it was a sticker type. I would rather have paint. Lol. Thanx again brother.
@jennifervogt9366 2 жыл бұрын
Your descriptions, explanations, and work are wonderful - Thank you! I think maybe I can tackle this. QUESTION: what paint volume did you use for base, clear, etc?
@williamzanghettijr5862 2 жыл бұрын
Always enjoy your videos Brian. I have a shop up in Massachusetts. We have been using the Deltron line for years. I did not see you guys add PPG's DX57 in the basecoat. It really helps with adhesion, zebra stripes and modeling, also mandatory when doing 3 stages .Rock on brother.William
@PaintSociety 2 жыл бұрын
Nice. Didn’t even know that! Was cool yo spray a different paint. I still remember the smell from when I used it in the garage lol
@torowazup1 2 жыл бұрын
👍🏼👍🏼👍🏼👍🏼👍🏼 Los Dos Locos 👌🏼
@eddiegoforth4328 2 жыл бұрын
Groovy daddy-o
@docfischer7291 2 жыл бұрын
I am finding that the lint and light dirt/debris come out and level with microfiber cloth. Great video !
@YtShorts88877 2 жыл бұрын
Excellent video 👌 keep up the great work
@MatthewScott 2 жыл бұрын
Use the Iwata lph400 with the orange cap on some base and clear. Like to see that. I use that for mine and a 2.0 airgunsa like you gave away for primer.
@paintgods 2 жыл бұрын
Thanks for the video I have been a long time spies hecker painter and just switched to ppg I absolutely love the paint just having some mottling issues with some of the ppg metallics like fords J7 if you know any ppg guys that use the solvent any advise is much appreciated I have a new dv1 and am trying that just not sure on the control coat technique that deltron users use. Thanks again
@stevealexander6415 2 жыл бұрын
Adhesion promoter like what you did around the handles and the moldings on that silver car and what is an all-around just good paint gun for paint and clear and sealer
@christopherjones8025 2 жыл бұрын
Man can’t get the Old Deltron line in Maryland anymore . That 2021 clear I always loved to spray .
@sportyp3293 2 жыл бұрын
Car painting is what I do in the Philippines,painting silver is the most problematic color to paint but actually we overcome it even though we're using inexpensive spray gun(cost 18-20$)
@rooksauto617 2 жыл бұрын
Hi Brian can you maybe answer a question for me I Have a Used Devilbiss gti pro lite with a 1.3 t20 cap can I use the 1.3 t110 cap without changing the needle and nozzle?
@REYREY-ue5fz 2 жыл бұрын
Yes that’s the cap I use love it
@undercarriagechroniclesssi9252 2 жыл бұрын
After spraying the base coat, can you lightly sand with 1000 grit then spray clear. Thanks
@sportyp3293 2 жыл бұрын
Sir Paint Society.. Sometimes we overthink it coz clients always expect more quality in our lesser quality working environment and equipment...I wish we have that kind of equipments here in the Philippines...
@sportyp3293 2 жыл бұрын
It's too expensive
@nomecognome2712 Жыл бұрын
The most beautiful metallic silver i have seen..what's the name of this color?
@gearheadfred5.059 2 жыл бұрын
I noticed that you don't put much paint on the lips of the wheel wells, or the front and rear edges of the fenders. Is there a reason for that or does the paint just get to those areas. Great job, and you guys are helping me learn a lot of things that I have questioned when I have painted in the past. Self learned, and "shooting from the hip" techniques!
@ferdinandvs.benedictvs 2 жыл бұрын
Oh man, countless times I have forgotten to add hardener to my mix! It's a nightmare!
@rickramsey9868 7 ай бұрын
What color of primer do you suggest to use under silver. Great video. Rick
@moisessingian3551 Жыл бұрын
Sir Brian your job very good, from Philippines index o me your spray gun,
@retardedfolks 2 жыл бұрын
Hey there! Love your vids! I use ppg paint at my shop, and have never heard of a clear base before. I wanted to ask you if using ppg color blender (dbc500) would be the same or similar as the clear base in between coats to have a constant wet bed? I have always sprayed sealer first, tacked and then layed on blender but it seems I should lay the blender down first? Also should I spray blender between each coat of base and after I finish? Seems that there are so many ways to do it, and honestly wish I could just sit and chat and pick your brain lol. In this vid I noticed that the base coat wasn't reduced out to make it more transparent. Sorry for the long rant haha. Take care!
@calimero1569 Жыл бұрын
Excellent video as always.
@icebmwpower 2 жыл бұрын
TOP NOTCH vid, Brian (as always). 🏅🏆 If we use slow/extra slow Reducer for the clear coat is it a must to use slow Hardener as well?
@kenc6764 2 жыл бұрын
Great video, just want to clarify a point. With metallic paints.; use a faster reducer than normal. I thought the slower the better? I'm prepping a car right now and gonna shoot a light blue metallic / pearl over a pure white basecoat. I only want to do this project once. Your advice has severed me well in the past and I proudly wear your merch. I really appreciate you featuring other great painters. That association and mutual respect is great to see.
@mrcriz530 2 жыл бұрын
No. He said high temp reducer. Wich is a slow reducer. Fast temp reducer is a low temp. Says it at 13:58
@haha-gu2vz 2 жыл бұрын
Trying to make a hlvp turbine.what size hose do you recommend????
@harlandbross3222 2 жыл бұрын
I'm planning on repainting one of my buddy's car with him. The only question I really have, is what do you guys do with guys do with door jams and trunks? Every video I see no one really messes with those parts of the car. It might be the fact that they aren't changing the original color of the car. But my friend wants to change the color, what do you recommend?
@956Sparkys 2 жыл бұрын
How soon can u apply wax, sealant or ceramic coating on the fresh new clear?
@rickramsey9868 6 ай бұрын
Brian, I'm shooting metallic silver and the booth temp is 65 to 70 deg, What reducer would you use for the paint? Slow? the tech sheet says fast. What about the reducer for the clear? Same speed as the paint? Do I shoot for the middle and use a medium speed reducer? Thanks for any input.
@dinnyjohnson4088 2 жыл бұрын
Forget the Hardener in clear we all been there ! 1 time probably in the first 6 months in my career i had a batch of clear I didn’t mix thoroughly half the job still tacky talk about nightmares
@philliptaylor4041 2 жыл бұрын
Hello ive been watching u for yrs ive painted my son 01 blazer candy cobalt blue with red pearl. Lady side swapped lower rear corner and trim around window. Insurance is saying only paint corner and side trim. Can this bedun and not tell. Paint job is 8 months old.
@TekMan05 2 жыл бұрын
Nice technique for blending. Gonna be replacing rocker panels and repainting doors and this should help quite a bit. BTW, what kind of stand was that with the bumper on? It was a paint saw horse with the arms?
@Skipdogg15 2 жыл бұрын
It's a bumper stand. They tilt up and down and the arms twist around to whatever you need. They make pretty cheep kits that come with arms and a center bar that clamp on to a regular folding stand.
@haha-gu2vz 2 жыл бұрын
Hye bro......dont overthink it its just paint
@topstring74 2 жыл бұрын
I sprayed a 17 Highlander two new doors blend fender blend quarter.. first coat of clear forgot clear hardener... Second coat remembered.. baked it and it would actually buff.. pulled it into the sun and it would sag lol... It literally took me about 8 hours of scotch, rags and laquer to remove it all and not mess up my blend panels!! What a nightmare
@eddieflores2852 2 жыл бұрын
I have always cross hatched my silver so that it doesn’t look blotchy!! Either way nice clean paint job by Pedro the man!!!!
@PeteR-or5kj 2 жыл бұрын
I have a pair of fiberglass bumpers that I want to have a chrome look to them. Can anyone recommend a quality paint that looks like chrome. Thanks.
@tonyborja7883 2 жыл бұрын
Hey Brian I repainted my car door because it had a dent in it n when I bought the color the person paint matched the color of my car and sold me the paint but when I got done spraying and clearing the new paint looks way darker then the old paint how can I fix this ?
@tnasituning8173 Жыл бұрын
But i thought that the bumper will need its own separate mixture configuration of material because it needs an added flexible agent in the primer, primer sealer, base metallic silver and clear? Yes?
@johanschoeman6427 2 жыл бұрын
Hi,thanks for the video's,i watched a lot of them. Just one question,what distance do you hold the spray gun from car body when you put on base cote and clear cote..
@PaintSociety 2 жыл бұрын
4-6inch
@cdumee 2 жыл бұрын
Hey Brian. Current working on painting my front bumper. Silver metallic. Stripped all paint and prepped for primer using 400 and a maroon scuff pad. After I laid my primer (SEM flexible primer surfacer) I sprayed some SEM guide coat before I began sanding with 800. As I was sanding a ton of black speckles remained on the primer and would not be removed until I went super deep into the primer leaving a super thin layer. Any idea what could cause this? I ended up stripping all the primer because I didn’t want the paint lifting later due to the speckles. Thanks!
@bodyshopsolutions695 2 жыл бұрын
You should sand the primer with 400 and basically sand it until all of the orange peal is gone.. you will break through the primer in places but it will be fine
@jimw6991 2 жыл бұрын
Nice video. How come we didn't get to see the finished product (car put backtogether)? It would "prove" how nice the new paint was blended, not that I have any doubts in the abilities of the folks doing the work.
@MrDequaddm 2 жыл бұрын
Nice video and Pedro is awesome. I just have a couple questions. One, why did you put wetbet over the fenders and hood? It already has basecoat. Second, not sure if PPG sponsored this video, but Pedro is an AkzoNobel Lesonal shop. So why not use Lesonal 100%? Keep up the good work!!!
@bodyshopsolutions695 2 жыл бұрын
Wet bed goes on between coats of base to help absorb the dry overspray when applying base coat. It makes the job much cleaner and helps blend panels.
@richardsymyniuk6928 2 жыл бұрын
Hey Brian on the clear coat gun did you use the std air cap or MP cap? 1.3 or 1.2 fluid tip
@PaintSociety 2 жыл бұрын
1.2
@spenceair1972 10 ай бұрын
Every time I try the drop coat I get a real rough texture.
@modugusampathkumar3361 2 жыл бұрын
Bro iam from India... How can i buy your spraygun in low budget
@GarageNoise 2 жыл бұрын
Been there, no hardner. Do it once you'll never let it happen again!
@PaintSociety 2 жыл бұрын
Hahahah we sit there and think of ways of making it hardener. It just won’t lol
@lukmansalam634 7 ай бұрын
What is your temperature?
@dansummers4980 2 жыл бұрын
i do it for a living but you never stop learning
@wotruannwah5678 2 жыл бұрын
How does that House of Kolor product compare to Sikkens Blending Additive?
@PaintSociety 2 жыл бұрын
Probably a little bit better
@wotruannwah5678 2 жыл бұрын
@@PaintSociety Awesome thanks
@juanmarquez7667 2 жыл бұрын
Where I can get those painting suits
@PaintSociety 2 жыл бұрын
Devilbiss lab coats
@dansummers4980 2 жыл бұрын
his site is all spanish ?
@stitchbonersoup8580 2 жыл бұрын
Why isn't Pedro covered?
@alialsaeedi1024 2 жыл бұрын
How do you make clear base?
@PaintSociety 2 жыл бұрын
I linked it in the description
@glen4407 2 жыл бұрын
The clear base coat is whatever the system uses as a mid coat carrier in tri coats. I would rather have the same base coat and reducer versus 2 different base coats and reducers.
@Gegsite 2 жыл бұрын
I forgot to add an epoxy hardener to the primer.... I added the clear hardener. Juhhh I was not happy. Clean all down, lost about 2 hours. Only those make mistakes whom work.
@triplecranks 2 жыл бұрын
I have always walked the distance and not stop at the fender then clear the door etc. Comments?
@samuelfrodge4988 8 ай бұрын
Innercoat
@davidray4655 Жыл бұрын
Just use a devilbiss DV1
@stevealexander6415 2 жыл бұрын
Two questions do you use
@patriklennartsson9099 2 жыл бұрын
Forget the hardner, ooyes. I was spraying a hole side of a tourist buss (14 meters) in a beautiful red color. And then it was time for the clear coat. Me the idiot behind the gun forgot the hardner in the clear coat 🥴 that was a messy job. No one of my co-workers dared to be around me that day, I wasn't in my best mood 🤣🤣🤣
@MrFishone777 2 жыл бұрын
What does (Model) mean?
@edgartafoya 2 жыл бұрын
maserati quattroporte
@PaintSociety 2 жыл бұрын
It’s actually mottle
@MrFishone777 2 жыл бұрын
@@looper451 Cool, thanks for the infro
@MrFishone777 2 жыл бұрын
@@PaintSociety Are Metallics flakes? And they stack up?
@josemsm 2 жыл бұрын
Hey I love your videos!!!! 25 minutes in between coats of clear is the worse advice u can ever give any of your subscribers. I would refer them to the TDS for their specific product, 25 minutes the clearcoat is way tooooo dry, rule of thumbs is 5 to 10 minutes or buy the time you touch the paper and is no longer stringi... plus if scorpion is an akzo shop why in this world is he using PPG????
@bodyshopsolutions695 2 жыл бұрын
25 minutes is fine.. I do it all the time.. I paint thousands of cars.. you can wait longer than that even.. but I know the BASF tds says 5-25 minutes of flash time..
@davidgentz1731 2 жыл бұрын
Hey dude your man is letting off the trigger and not keeping it running when he goes off to end of a panel tell him to get
@paulkelley7445 2 жыл бұрын
Sc
@christopherjones8025 2 жыл бұрын
Oh yeah forgot to put harder in clear about 7 years ago with Some Nasons on a set of four white f250 fender flares . When you wait 24 hours and is rubbery and then you just know and say to yourself ur an IDIOT.
@PaintSociety 2 жыл бұрын
Lmao
@Curiosity_Cars Жыл бұрын
way he accelerates in and out of he's spraying is weird. Not very uniform
ColoroN Car PainteR
Рет қаралды 75 М.
Ivan Ivanov
Рет қаралды 6 МЛН
Контент
Рет қаралды 9 МЛН
ABRACADABRA TV
Рет қаралды 902 М.