Glad it was helpful!

Thanks for your support

My pleasure!

Glad it was helpful!

You're welcome 😊

Good to hear

The CAMSETs are compatible with specific cameras using any lens.

Holding down the custom button is only necessary when using a recall custom hold memory and not the 1, 2 and 3 on the shoot ode dial. When using Shutter priority you have to be aware that it is possible to accidentally overexpose or underexpose or risk the camera losing Phase Detect AF on all cameras except the A1. If you think you know your camera you may need to think again.

@@AlphaCreativeSkills thanks yeah I do save it to the custom settings so it remembers my full setup. I just found I was never changing my aperture but would change my shutter speed often so I figured I would change from aperture with min shutter speed back to shutter priority. But it’s all based on your workflow with little tweaks that worked for my setup. I appreciate the feedback!

If you are Patreon you need to ask your question on the Patreon support channel. We have had to disable Notifications on KZfaq as we are receiving new comments every few seconds. Only Patreons can download CAMSETs from Mark's support channel - Patreon.com/markgaler Admin Team for Mark Galer

The existing A9III CAMSET on my Patreon support channel works with version 1.00 and version 2.00 of the A9III firmware. Please use the Patreon forums to ask these questions as I can only get to respond to a small percentage of comments that I see on KZfaq (I have had to disable notification on KZfaq).

The Recall Custom Hold memories are able to override the Drive and Focus modes set by the upper dials.

Yes

The A7Rlll predates the CAMSET feature but my A7Rlll eBook guides you through the setup of the camera to use the PAL workflow

I shoot at sporting events with the 400 F2.8 GM hand-held. Even if the match lasts more than hour or a MotoGP lasts for three days. The camera sonly raised for a minute at a time. I also shoot a lot of wildlife without a tripod - sometimes I am on the ground with my elbow either on the ground or on my leg supporting the weight of the lens. If you were a bird photographer waiting for for extended periods of time trying to capture a particular bird in flight then I guess supporting the weight of the lens hand-held may become a pain - hence the use of gimbals for these photographers. I have a short attention span so tend to pick subjects where I am reasonably confident of capturing images frequently without having to use a tripod. If the weight of the 400 GM Prime is likely to become a problem I will be using my 100-400 GM

@@AlphaCreativeSkills Thank you Mark for your detailed answer. Helps my decision making process a lot.

Same story here. Fast action shots aren't frequent for me, so I kept Action on 2. I put Landscape on M1 (so still PAL) because the landscape doesn't often move while being photographed: if it does, I may have bigger problems than getting a photograph. Light may change rapidly, but not faster than I can adjust settings. The M1-M3 settings are backed up to my computer, so I can reload them if I format or replace the card. If I forget to do that, I still have four decades of photography memory between my ears to draw on, including full manual mode, for any shooting situation.

You can set up a third group of settings on P, A, S or M and when you return from 1 or 2 those settings are retained. Unfortunately any changes will have to be reinstated when putting the camera away. There is also the option to use one of your older cards for storing the M1 to M4 memories - a card that you don't shoot to and one that you don't format. After loading the memory you can eject the card as the camera does not have to have access to this card after loading the memory. Not ideal if you need speed, but if you put your landscape setting, astro setting or Timelapse settings on the card there is rarely a need for speed in these instances.

Answered on Patreon.com/markgaler

There is a duplication of the Custom Key/Dial Set. for Movies and Stills. The Dial Customize menu has additional options for customising the dials such as AV/TV rotate etc.

@@AlphaCreativeSkills Thank you very much.

This is the video where I show Alpha users how to save and load CAMSET files: kzfaq.info/get/bejne/n7Jjedl2x92pY6s.html Switch your KZfaq membership to a Patreon premium membership (you don't need both) by heading over to Patreon.com/markgaler - as well as the CAMSET files you will also get access to a 500-page ebook (free for members) and Raw files (in the DNG file format) I captured for my Sony camera and lens reviews.