NEW AvalonKing Armor Shield MAX ceramic coating! 1 layer, 3 years protection!

Рет қаралды 32,493

8 ай бұрын

NEW AvalonKing Armor Shield MAX ceramic coating! 1 layer, 3 years protection. In this video, I unveil a new ceramic coating that we decided to apply to my brother’s SUV. I will share all the new features of the ceramic coating as well as doing an application demonstration of the new AvalonKing Armor Shield IX MAX ceramic coating!
▶️ SUBSCRIBE, SHARE and LIKE today’s video & Turn On Notifications for New Videos - bit.ly/PanTheOrganizer
⬇️🔶 LINKS TO PRODUCTS MENTIONED IN THIS VIDEO ⬇️⬇️
✅ The new AvalonKing Armor Shield IX MAX coating: avl.kg/panas9max
Get a free AvalonKing LITE ceramic spray with your MAX coating! LIMITED OFFER
AvalonKing Ceramic Prep Shampoo: avalonking.com/products/ceram...
AvalonKing IPA Prep Spray: avalonking.com/products/ipa-p...
AvalonKing Multi-Purpose microfiber towels: avalonking.com/products/multi...
AvalonKing microfiber buffing towels: avalonking.com/products/micro...
AvalonKing Microfiber Chenille Wash Mitt: avalonking.com/products/micro...
AvalonKing Armor Shield Lite (maintenance spray): avalonking.com/products/armor...
Tire dressing used here: bit.ly/2ZXCKt3
✅ The original AvalonKing Armor Shield IX beginner ceramic coating: avl.kg/pan25
Use the promo code PAN25 during checkout and receive $25 off each purchase! Discount code only applies to the original Armor Shield IX ceramic coating.
Features of the new AvalonKing Armor Shield IX MAX ceramic coating:
- 3 years of durability
- 1 layer application
- Only 4 hours of curing time without exposure to water or rain
- Improved gloss
- Enhanced hydrophobic properties
- Provides UV protection
- New applicator for quicker application
- Can be applied on paint, glass, wheels and plastic trim
Important notes:
- If you happen to drive the vehicle in rainy conditions 4 hours after the application, it’s recommended to wipe any water off in a 4-12 hour window after the application.
- Do not wash the car for 7 days following the application.
- Do not apply in direct sunlight.
- Use a silica spray sealant (like Avalonking Armor Shield LITE) once every 2-3 months to maintain slickness and shine.
We applied the AS9 MAX coating in October 2023.
Watch more of my videos below:
✅ Armor Shield IX application demo and review: • AvalonKing Armor Shiel...
✅ AvalonKing Armor Shield IX : 2 year update: • 2 YEAR UPDATE : Avalon...
✅ AvalonKing Armor Shield Lite spray review and demo: • NEW! AvalonKing Armor ...
Full disclosure: This is a sponsored video. However, I made sure that the opinions expressed in my video are my own and the company had no influence on my content.
🎶 MUSIC I USE IN MY VIDEOS - Referral link, get a free trial by clicking below!
www.epidemicsound.com/referra...
Welcome to Pan TheOrganizer, one of the biggest car detailing channels on KZfaq, here to help you with fun and entertaining tutorials, tips, tricks, products and equipment reviews!
👍🏼 Click the like button if you enjoyed the video and share it with your friends and family. Don’t forget to SUBSCRIBE to my channel and activate the notifications (the bell icon) if you want to be notified every time I upload a new video. Welcome to the Pan TheOrganizer family!!
👕 My merchandise store: pantheorganizer.creator-sprin...
🎥 List of equipment I use to produce my KZfaq videos: • My New 4K Camera Gear!!
📲 Follow Pan TheOrganizer:
Instagram, TikTok, Facebook & Twitter: @pantheorganizer
🌐 Visit my official website: pantheorganizer.com
🎶 Intro music by Hurley Mower
/ hurleymower
#AvalonKing #ArmorShield #MAX #detailing #cardetailing #cleaning #pantheorganizer #detailingtutorials #autodetailinge

Пікірлер: 526

@PanTheOrganizer 8 ай бұрын

⬇🔶 LINKS TO PRODUCTS MENTIONED IN THIS VIDEO ⬇⬇ ✅ The new AvalonKing Armor Shield IX MAX coating: avl.kg/panas9max Get a free AvalonKing LITE ceramic spray with your MAX coating! LIMITED OFFER AvalonKing Ceramic Prep Shampoo: avalonking.com/products/ceramic-prep-shampoo AvalonKing IPA Prep Spray: avalonking.com/products/ipa-prep-spray AvalonKing Multi-Purpose microfiber towels: avalonking.com/products/multi-purpose-microfiber-towels-6-pack AvalonKing microfiber buffing towels: avalonking.com/products/microfiber-buffing-towels-3-pack AvalonKing Microfiber Chenille Wash Mitt: avalonking.com/products/microfiber-chenille-wash-mitt AvalonKing Armor Shield Lite (maintenance spray): avalonking.com/products/armor-shield-lite ✅ The original AvalonKing Armor Shield IX beginner ceramic coating: avl.kg/pan25 Use the promo code PAN25 during checkout and receive $25 off each purchase! Discount code only applies to the original Armor Shield IX ceramic coating. Watch more of my videos below: ✅ Armor Shield IX application demo and review: kzfaq.info/get/bejne/iM2cnJmHs7LXe2g.html ✅ AvalonKing Armor Shield IX : 2 year update: kzfaq.info/get/bejne/aMxmlcSav9nPlXU.html ✅ AvalonKing Armor Shield Lite spray review and demo: kzfaq.info/get/bejne/os9de5d7ureslmg.html

@owenbanks4621 8 ай бұрын

Really excited to hear about this. Big fan of the original armor shield. can't wait to try this out.

@mr.mephistopheles2497 8 ай бұрын

Congratulations Andy and thank you yet again Pan. Cheers brothers.

@PanTheOrganizer 8 ай бұрын

Thanks!

@JT_70 4 ай бұрын

I’ve applied AS IX twice and have been very pleased with it and with the support from Avalon King. I ordered AS IX Max this evening before watching this video. One important application detail is to wipe off or buff the finish as soon as it flashes (depending on temperature may be as soon as 1 minute). If you don’t buff it off quickly enough it is nearly impossible to remove the flashed product from the finish). I do much smaller areas before buffing than shown in the video. With AS IX I always apply 2 coats to ensure full coverage. The gloss is amazing.

@PanTheOrganizer 4 ай бұрын

Thanks for sharing your experience. How did you discover my channel by the way? Welcome to my channel. You discovered one of the biggest car detailing channels on KZfaq as we surpassed 985,000 subscribers and we have over 135 million views! I have been detailing for 27 years and I love to share my knowledge and passion with my viewers. You found the right channel to help you learn everything about detailing.

@benoitparadis6398 2 ай бұрын

How is the slickness? Me I don’t have any slickness at all. Gloss and hydrophobic are very good however.

@scootytamra 8 ай бұрын

Congrats Andy! You deserve all the best!!!! I love seeing you!

@PanTheOrganizer 8 ай бұрын

Thanks for watching!

@cgraham6 8 ай бұрын

Congrats on the fresh coating, Andy! That's always a great place to be, knowing it's going to be a good few months before you have to worry about your protection layer again.

@PanTheOrganizer 8 ай бұрын

Thanks for watching!

@daveorourke8447 8 ай бұрын

Congrats Andy, Thanks for another awesome video

@PanTheOrganizer 8 ай бұрын

Thanks 👍

@hayden199516 8 ай бұрын

Thanks for the video pan! And Congratulations Andy on your new coating and home. 😊

@PanTheOrganizer 8 ай бұрын

Our pleasure!

@lindavent9490 8 ай бұрын

Really happy to see they have upgraded the applicator pad. That foam block was terrible! For the beginner or non-professional diyer, I do think this is an acceptable product. User friendly, that doesn't break the bank, and provides a great result. The new and improved version looks even better and I will definitely consider purchasing. My only beef with Avalon King, is when they have a sale. I live in Canada, and when I tried to purchase Armor Shield Lite, $25 immediately jumped $10 plus tax and shipping, which brought the final price to almost $50. Not a great deal, and I was unable to get the advertised price, after numerous attempts. I gave up and purchased Maguiars ceramic topper at Walmart for $20. It does the same job I'm sure, for half the price.

@user-bs7fg7jq6n 8 ай бұрын

Congrats on your new home Andy! How exciting!

@PanTheOrganizer 8 ай бұрын

Thanks for watching!

@ThisOldDetailingDude 8 ай бұрын

Andy!!!!! It always great to see Andy ! Great tutorial as always!

@PanTheOrganizer 8 ай бұрын

Glad you enjoyed it

@frankiemoore531 8 ай бұрын

I used the previous Coating and absolutely love the easy application... This and Gyeon Can coat are my favorite to apply...

@PanTheOrganizer 8 ай бұрын

Thanks for sharing your experience Frankie!

@benroos 8 ай бұрын

Thank you Pan! I've learned a lot from you and I also appreciate the product reviews which helps me making my choices. Good luck with your channel and I continue to stay tuned! Kind regards, Ben Roos

@PanTheOrganizer 8 ай бұрын

Thanks for your support Ben!

@ddautodetailing 8 ай бұрын

Great video! It's great to see the new changes. I really like the new applicator, so much more versatile.

@PanTheOrganizer 8 ай бұрын

Thanks!

@Rubiowner05 2 ай бұрын

Thanks for this update. Just ordered the Max!!

@PanTheOrganizer 2 ай бұрын

Welcome to my channel. You discovered one of the biggest car detailing channels on KZfaq as we surpassed 1 million subscribers and we have over 135 million views! I have been detailing for 27 years and I love to share my knowledge and passion with my viewers. You found the right channel to help you learn everything about detailing.

@kawh8719 8 ай бұрын

Pan, I really appreciate your detailed review. Extremely helpful showcasing your steps. I used AvalonKing 9 on my brother's motorcycle, amazing protection! His bike always looks amazing and it's a show stopper when he wipes off the dust for admirer's. It's great to show your work on different cars, most of us can only dream about detailing a Porsche!

@PanTheOrganizer 8 ай бұрын

Thanks for the kind words! I appreciate it. I work hard to produce my videos, so it's nice to see my efforts don't go unnoticed by my viewers.

@yankeepride1 8 ай бұрын

A lot of people hate on it for being a rebrand. I used it and it is easy to use and does last a decent time

@jayp9450 8 ай бұрын

Thank you and congratulations to your brothers new house 🎊

@PanTheOrganizer 8 ай бұрын

Thanks!

@bobgratton9362 8 ай бұрын

Super vidéo comme toujours Pan 👌🏻✌🏼

@PanTheOrganizer 8 ай бұрын

Merci Bob!

@piggietruckerjones7545 8 ай бұрын

Great video as always. I can't wait to see what's up with the garage.

@PanTheOrganizer 8 ай бұрын

Thanks!

@canadianelementsautodetailing 8 ай бұрын

Big hallo to You and your cool brother Andy. I have mentioned that to you once before but you are my teacher I’ve been in the business for five years consistently I’m gonna open my own shop soon thanks to your Ceramic video that I watched long time ago. My whole life has changed for the better just by watching that one video of yours changed my whole life so I can’t thank you enough pan

@PanTheOrganizer 8 ай бұрын

That is awesome! Thanks for that positive feedback!!

@davidboyce6427 8 ай бұрын

Absolutely love seeing Andy in any of your videos 🤗🤗

@PanTheOrganizer 8 ай бұрын

😁👍🏻

@lowasteam5319 8 ай бұрын

New weekend warrior here and so appreciate Pan!

@PanTheOrganizer 8 ай бұрын

Hi! Welcome to my channel. You discovered one of the biggest car detailing channels on KZfaq as we surpassed 945,000 subscribers and we have over 125 million views! I have been detailing for 26 years and I love to share my knowledge and passion with my viewers. You found the right channel to help you learn everything about detailing.

@CobraHobby 8 ай бұрын

Great video Pan.

@PanTheOrganizer 8 ай бұрын

Thank you!

@davidboyce6427 8 ай бұрын

Congratulations Andy on your new home purchase 🤗🤗👌

@PanTheOrganizer 8 ай бұрын

I'll let him know! :)

@ronayotte3571 8 ай бұрын

Congratulations, Andy on your new home! Congrats on the new coating on your Mazda! Pan... I can't wait to see your garage upgrade.

@PanTheOrganizer 8 ай бұрын

Thanks for watching Ron!

@milbydunnii 8 ай бұрын

I applied Avalon King to my 720S almost two years ago, and the properties seem to still be effective on the PPF. Since it's been two years, I think I'll try their new product. I love that it can be used on glass, plastics, etc. Thank you for the review, Pan; your videos provide excellent visual demonstrations.

@PanTheOrganizer 8 ай бұрын

Thanks! What color is your 720S? Those are beautiful cars. If I didn’t have my 911 Turbo S and didn’t care for all wheel drive (I drive it in winter), I would have loved a 765LT!

@milbydunnii 8 ай бұрын

@@PanTheOrganizer It's Sarthe Gray 2022-such a neat color. It appears black at night, but in daylight, the blue in the gray shines through. I considered the 911 T, but the McLaren's dihedral doors were irresistible. The sunroof's two-tone, button-activated design is fantastic as well. I'm eyeing the 911 T for the future, but I'm already tempted by the new McLaren 750. All the best!

@lesliephillips8099 3 ай бұрын

Ordered my bottle the other day. I will be applying this Sunday on my Assistant Pastor's vehicle and then mine. Can't wait! Thanks for the video Pan! You da man!

@PanTheOrganizer 3 ай бұрын

Hope you enjoy it! How did you discover my channel by the way Leslie? Welcome to my channel. You discovered one of the biggest car detailing channels on KZfaq as we surpassed 990,000 subscribers and we have over 135 million views! I have been detailing for 27 years and I love to share my knowledge and passion with my viewers. You found the right channel to help you learn everything about detailing.

@joelsmith6919 8 ай бұрын

Was wondering about this stuff! Really wanna try it out

@PanTheOrganizer 8 ай бұрын

Thanks for watching Joel!

@DetailingMadeSimple 8 ай бұрын

Can wait to see the durability. Also the new GOAT coating looks awesome 😮. Thank you for the review

@PanTheOrganizer 8 ай бұрын

Thanks! I’ll be monitoring the durability for sure.

@jimprovax6846 8 ай бұрын

Thanks for taking us along on your adventure. The first Avalon King coating was super easy to apply. Looks like the new coating is as easy to apply and more durable. Enjoy your day.

@PanTheOrganizer 8 ай бұрын

Thanks for watching!

@ultrapepe2905 8 ай бұрын

@@PanTheOrganizer please reply 🙏 Pan could you please tell me what we could use for those that have used the turtle wax hybrid solutions ceramic spray coating and alike that can go over top for dealing with the water spots? (The one's that don't come with the extra step)

@PanTheOrganizer 8 ай бұрын

I don't understand your question. If your paint has water spots, it depends how bad they are and how deeply they etched through the clear coat. You start with the less aggressive method first, and then see the results, and move up with more aggressive methods if the water spots aren't gone. 1) Use a waterspot removing shampoo like this: amzn.to/40txSJz 2) Use a waterspot removing spray like this: amzn.to/3uf65Ak (the car has to first be washed, and then you use the spray on a clean and dry surface) 3) Machine polishing.

@RicLucifer 8 ай бұрын

amazing! Thank you for sharing!

@PanTheOrganizer 8 ай бұрын

Glad you enjoyed it!

@_fast4lfa 8 ай бұрын

Pan, you are a word class gentleman! Love your content!

@PanTheOrganizer 8 ай бұрын

Thanks for the kind words, I truly appreciate it!

@marcelogarcia5094 6 ай бұрын

Great video. Thanks from Australia

@PanTheOrganizer 6 ай бұрын

Thanks for watching! How did you discover my channel by the way Marcelo? Welcome to my channel. You discovered one of the biggest car detailing channels on KZfaq as we surpassed 960,000 subscribers and we have over 130 million views! I have been detailing for 26 years and I love to share my knowledge and passion with my viewers. You found the right channel to help you learn everything about detailing.

@davidfromafrica 8 ай бұрын

Incredible review

@PanTheOrganizer 8 ай бұрын

Thanks David!

@scottweinstein4255 5 ай бұрын

Wasnt happy with my AS IX so i contacted them and theure sending max as replacement.. great response. Also thanks for including the tire dressing in the notes, looks terrific. And, of course, congrats to Andy!

@PanTheOrganizer 5 ай бұрын

Oh good to know!

@Dimasik25 8 ай бұрын

Very cool video. Thanks

@PanTheOrganizer 8 ай бұрын

Glad you liked it!

@kennethbascom5023 8 ай бұрын

Great review pan YES we need to see the goat

@PanTheOrganizer 8 ай бұрын

Thanks Kenneth!

@edmondmartin1971 8 ай бұрын

Thanks for a great video Pan. I have used this ceramic on a few vehicles in the past couple of yrs and really look forward to using the new MAX....with a 3 year protection. Looking forward to 2024 on the new Avalon King NEW ceramic!!! Andy...Congrats on the new House...Now you need to make it a Home!! 😜

@PanTheOrganizer 8 ай бұрын

Thanks for watching Edmond! I hope you are doing well.

@tellis17 8 ай бұрын

Super excited to try this ! If I was to use the Armor shield lite every 2 months what can I use when I after my weekly wash’s for a drying aid/ final wipe down.

@PanTheOrganizer 8 ай бұрын

You can use Lite as often as you want. Or any ceramic or graphene based quick detail spray that you want.

@stephenthompson1562 8 ай бұрын

Hi Pan. Even from PRINCE EDWARD ISLAND here again. With all these new coatings you should do at some point in time a review of the top five and see if there's some sort of tool that measures the gloss factor of the paint and see which one comes out on top! These videos are great thank you for all your great work. When I'm visiting my family in Montreal I'd love to see your shop sometime lol!

@PanTheOrganizer 8 ай бұрын

Thanks Stephen!

@TheCarDetailingChannel 8 ай бұрын

Great overview of this new coating Pan. I didn’t think the original Armour Shield 9 could get any easier as it was already the easiest ceramic coating I’ve ever used (even easier than uk3.0). I think I’ll probably grab some of this stuff just to try it out. The problem I have with Avalon King is that I think they have some quality control issues with the formula, I’ve applied their coating several times and have seen inconsistent results; for the price though, it’s too be expected.

@PanTheOrganizer 8 ай бұрын

Thanks for watching! Yeah the original was sooooo easy to apply, it was the easiest when it was released years ago. This new one still retains that ease of application, and should in theory last longer all with just one layer, so I'm looking forward to real world testing to see how long it goes.

@BenTheAVGNFan 8 ай бұрын

Way to go Andy! 💪

@PanTheOrganizer 8 ай бұрын

Thanks for watching!

@Remyp388 8 ай бұрын

Pans smile when he rubs the panels for the slickness tells you he really loves what he’s doing he’s not faking it.

@PanTheOrganizer 8 ай бұрын

Hehe thanks man! Even after 26 years of detailing, I’m still so passionate of this craft. It’s a true artform that makes me happy. I hope you’re having a great weekend! 👍🏻

@Remyp388 8 ай бұрын

@@PanTheOrganizer that’s awesome man happy for you. It’s not work when u you love what you’re doing and thank you hope you have a great weekend also.

@PanTheOrganizer 8 ай бұрын

Don't get me wrong producing videos is super demanding and time consuming. It's actually the hardest thing I ever did in my life (and I studied in medicine, so that goes to show just how hard it is to produce quality KZfaq videos consistently year after year). But yes, at least I enjoy producing them. I have been doing videos since April 2016, so we're coming up on 8 years of videos, over 1000 videos so far, with new ones added twice weekly. Plus I can spend up to four hours each day personally replying to KZfaq comments, as I like being connected with my viewers. No other big channel does that. I won't lie, it does take away from my personal and family time, but in the end, I'm so passionate about detailing, it's nice to see my viewers share a common passion with me.

@Remyp388 8 ай бұрын

@@PanTheOrganizer yeah that’s crazy how time flies I been watching your videos pretty much since the beginning I can’t even imagine how long it takes to put a video together after editing and all that. I really appreciate that you always reply back to my comments and others that’s really cool and times consuming I did wonder how you do it lol I don’t know if your girlfriend helps you with the replying part lol. You definitely help me and others pick the best products and help with new ideas and techniques to detail it’s my hobby, I’m a weekend warrior when I have time to keep tight and keep my car clean. 😅 keep up the great work man look forward to your next video and all the new products from this years SEMA.

@PanTheOrganizer 8 ай бұрын

Thanks for the kind words! You sent me positive vibes! 😁👍🏻

@theunknownpers0n Ай бұрын

Thanks for the video Pan! Ive just bought this thanks to your review! I applied it to my new Audi q4 it’s a big car so it took just over 3/4 of the bottle but I covered everything from windows paint, plastics to wheels. It pops now. can’t wait to see its hydrophobic capabilities!! Installed outside in the UK weather it was just as easier as their last coating.

@PanTheOrganizer Ай бұрын

Great to hear! Welcome to my channel. You discovered one of the biggest car detailing channels on KZfaq as we surpassed 1 million subscribers and we have over 140 million views! I have been detailing for 27 years and I love to share my knowledge and passion with my viewers. You found the right channel to help you learn everything about detailing.

@robertpenland2429 8 ай бұрын

Wife said I can’t watch you anymore I keep ordering stuff 😊. 4 hrs to go hang out in your bad boy media room 👍thx Pan for all the great videos .

@PanTheOrganizer 8 ай бұрын

Haha tell her all your purchases are Pan approved and let me know how that conversation goes! 😂👍🏻

@Spirited282 7 ай бұрын

Congrats Andy on your new home and fantastic shiny looking suv. I love that Andy's car is close to the color of my Rav 4 it gives me an idea of how the product will turn out :)

@PanTheOrganizer 7 ай бұрын

Thanks for watching!

@TheCarDetailingChannel 8 ай бұрын

Not done watching yet but hilarious blooper at the beginning. We love you too Pan 😂.

@PanTheOrganizer 8 ай бұрын

Heheh :)

@scottsigmon926 8 ай бұрын

Already preordered mine!!!

@PanTheOrganizer 8 ай бұрын

Enjoy!

@scootytamra 8 ай бұрын

Wow Andy's car looks amazing!!!! Like candy!!!! and it deepens that nice grey color!!!!

@PanTheOrganizer 8 ай бұрын

It came out great!

@bryanvlogs1421 8 ай бұрын

After using DIY details 3 year graphene coating I cant go back to any other coating both personal and professional. But Avalon King is a decent choice also. Good Video!

@PanTheOrganizer 8 ай бұрын

Thanks for sharing!

@chrissimmons9969 8 ай бұрын

Congratulations to Andy for living his best life right now with a new new home and freshly ceramic coated vehicle. That kicks a$$! I’m interested in the durability of this new Avalon King formula.

@PanTheOrganizer 8 ай бұрын

I will also be curious to follow how this coating does over the coming months and years.

@KonstaNykanen 8 ай бұрын

Absolutely amazing that AvalonKing brought a more durabale coating, with great features to the market! I love that the curing time is only 4 hours, fantastic! Great video Pan, like always❤. Congratulations to Andy on his new home, hard work definitely pays off👍🏻

@PanTheOrganizer 8 ай бұрын

Thanks! I’ll let Andy know.

@KonstaNykanen 8 ай бұрын

@@PanTheOrganizer 👍🏻❤️

@peppersmith 8 ай бұрын

Yes, very easy and quick. Like i said and its coming. Spray & Drive Ceramic coatings😃I'll put this on my list... Nice!!!

@PanTheOrganizer 8 ай бұрын

Thanks for watching!

@PeterXaymountry1 8 ай бұрын

This coating looks amazing. I wish my car has less dirt with my System X ceramic coating on it but it seem to attract so much dust within a day or 2.

@user-le8wh6mi3x 8 ай бұрын

Congratulations to Andy, on his new home.

@PanTheOrganizer 8 ай бұрын

👍🏻

@radik90 7 ай бұрын

Thank you for this video @PanTheOrganizer! After watching your video, I purchased the Armor Shield IX Max coating. I have a quick question, in the video you said that the new version requires a single layer coating, but can it be applied over 2 layers. If yes, what is the technique and what's the wait time between applying the 2 layers? Thank you!

@johnfitzgerald168 8 ай бұрын

Hey, Pan. Love your videos. Ty for the content. I just bought a 2023 model Y. Which ceramic coating would you recommend? I have watched all the different videos , with different products you have used. I just need help nailing it down. Ty

@PanTheOrganizer 8 ай бұрын

Hi John! First, welcome to my channel. You discovered one of the biggest car detailing channels on KZfaq as we surpassed 945,000 subscribers and we have over 125 million views! I have been detailing for 26 years and I love to share my knowledge and passion with my viewers. You found the right channel to help you learn everything about detailing. There are so many coatings, at different price points, there isn't one good answer. It depends on your needs, your experience level, your budget, and if you're looking for a pro grade or DIY consumer grade coating. One thing is for sure, all my top products recommendations are in my popular annual car detailing products awards here: kzfaq.info/get/bejne/gbimatl82NvQmYU.htmlsi=zhvoyi8oL1jho8sC

@user-ew4rc6mg2t 6 ай бұрын

I'm watching yor videos and inspire for the detailing. Keep doing in the same way. I will try soon the AvalonKing ARMOR SHIELD IX DIY CERAMIC COATING KIT and check the results :)

@PanTheOrganizer 6 ай бұрын

Thanks for the kind words about my videos! I wish you a happy new year! How did you discover my channel by the way? Welcome to my channel. You discovered one of the biggest car detailing channels on KZfaq as we surpassed 960,000 subscribers and we have over 130 million views! I have been detailing for 26 years and I love to share my knowledge and passion with my viewers. You found the right channel to help you learn everything about detailing.

@yavorhristov6863 6 ай бұрын

@@PanTheOrganizer Thanks Pan and Happy New Yar too. I have found detailing like the thing that I like to do (for many years I'm doing an IT software job). Cause we do not have many such channels in Bulgaria, I have found the IDA then Yvan Lacroix channel and after that yours. s

@yavorhristov6863 6 ай бұрын

Sharing knowledge is great and also like the detailing community 😁

@kristofferpence 8 ай бұрын

Hey Pam! Great video as always- wanted to ask, is the advanced graphene video coming out soon?

@PanTheOrganizer 8 ай бұрын

Yes, it should be this month.

@cederieckconard888 8 ай бұрын

Uk 3.0 or avalongking let me now it wil be my next on the car ! Great vid btw

@PanTheOrganizer 8 ай бұрын

Thanks! Both coatings are easy to apply so simply pick the less expensive one for you to get.

@kimnach 8 ай бұрын

It was three summers ago that I applied AS IX to our four vehicles. (We are in the north-eastern Ohio area.) First, the coating on my car remains fantastic; however, consider that my '88 Camaro is a summer-only car and is hand washed followed by Turtle Wax Flex Wax as a drying agent. The IX is nearly spent on my wife's Trax and my Silverado--both are year round drivers, are solely tunnel washed weekly at the local Car Wash, and had gotten only semi-frequent ceramic detail spray applied (tough to do in sub-zero temps). Finally, the Equinox coverage was spent after the first year--our older son had it in college in Stuebenville for year one and our younger son now has it at Ohio State. That car was lucky to have been washed whenever they came home with it. It's really all about the maintenance. Next summer I will be busy with five cars (older son recently purchased a Colorado) and this new product!

@PanTheOrganizer 8 ай бұрын

Thanks for sharing your experience! How did you discover my channel by the way? Welcome to my channel. You discovered one of the biggest car detailing channels on KZfaq as we surpassed 945,000 subscribers and we have over 125 million views! I have been detailing for 26 years and I love to share my knowledge and passion with my viewers. You found the right channel to help you learn everything about detailing.

@kimnach 8 ай бұрын

@@PanTheOrganizer I've been a subscriber for a couple of years and occasional commentor. I have been fastidious about cleaning and maintaining my cars since my first (1976 Mustang II) when I was in high school in the 70s. I recall first using Pledge, of all things, on its interior!

@PanTheOrganizer 8 ай бұрын

Hahaha yes Pledge, and the good old oily overly shiny Armor All days! And the terry rags (way before microfiber towels were invented), and leather chamois to dry (before microfiber drying towels were a thing) and hard to buff waxes! The good old days hehe. A trip down memory lane for sure!

@kimnach 8 ай бұрын

@@PanTheOrganizer Actually, a combination of a "greasy" turtle wax product (it was clear) and consitently using a windshield sun shade has kept my dashboard pristine after 35 years of ownership. Can't say that a lot about thirdgen Camaros--most are cracked and warped. Have a great evening, Pan!

@tanethomas 8 ай бұрын

Hi Pan, awesome channel, you’re the GOAT. I have a Boxster, just wondering if there’s a ceramic coating for the fabric roof? None of the solutions I’ve used are hydrophobic for very long and I wonder what the best maintenance solution is? Thanks!

@PanTheOrganizer 8 ай бұрын

Thanks! For fabric tops, there are some fabric coatings like CarPro Fabric 2.0 but none are designed to last for years like oaint coatings due to the soft surface they’re applied to unfortunately.

@404notfound..... 8 ай бұрын

Outstanding product!! Andy's suv looks amazing!! Pan what tire shine did u use ? Tks 👊 🇨🇦

@PanTheOrganizer 8 ай бұрын

Thanks! I used this tire dressing: bit.ly/3VdsPd6

@garethshaw5210 8 ай бұрын

Another great video pan!! Congratulations on your new house Andy!!🎉 Pan, is there going to be a discount code as there was for the first edition? Thank you. 👍👌

@PanTheOrganizer 8 ай бұрын

No discount code, but for a limited time they’re offering a free bottle of the Lite spray maintenance topper.

@brolandry 8 ай бұрын

Always enjoy your videos Pan, thanks! I applied armor shield IX to my kids car about a month ago. Was sorta disappointed, likely cause I only applied one coat. Can I decon and wipe down and put this one directly on top, or is there another step before applying the MAX?

@PanTheOrganizer 8 ай бұрын

You must remove the previous coating by machine polishing. It’s the only way to ensure 100% removal of any previous protection, especially a ceramic coating.

@dvcavall 3 ай бұрын

I have really been enjoying Pan's videos. After watching his initial review of the previous product I ordered two bottles. Then I watched the Dimitri's Garage video where he tested that product with washings and it failed after two washes! Adams Graphine Ceramic, tested the same way lasted hundreds! I hope Pan begins doing actual testing for things like durability..BEFORE..posting reviews.

@PanTheOrganizer 3 ай бұрын

Be careful what you accuse me of. You need to get your facts straight before dropping false accusations. I saw his video and he tested the old silver/chrome bottle Armor Shield IX, not the new MAX black bottle version. Two COMPLETELY different products! The previous one I had tested in real world conditions and made many updates. It lasted 18 months on a super neglected car. Here’s a two year update video that I made: kzfaq.info/get/bejne/aMxmlcSav9nPlXU.htmlsi=P93Qtb3uuY2vHqMF This was an entry level super inexpensive coating especially with the discount code. Are there better coatings? Absolutely, but they are usually more expensive. The Adam’s Advanced Graphene Ceramic Coating is significantly more expensive. So yes of course it should absolutely last longer. This new MAX version only requires one layer and the claimed durability is three years. I will be making updates on that too. And it’s not because a product doesn’t last in one person’s conditions that it means it will not last for another person. There are tons of variables to consider for durability. Prep, application, conditions, weather, mileage, maintenance. I have covered that topic many times in the past. I have also been testing the Adam’s Advanced Graphene Ceramic coating for over 2.5 years on my girlfriend’s car and it’s still doing ok. It did start to lose a bit of its original performance, but it’s hanging in there. It likely won’t last the full claimed 9 years though, as weather is brutal in Canada. The only way to test a coating is to apply it and see how it does in YOUR specific conditions. Multiple wash test in one video doesn’t mean much. Nor do chemical resistance tests. Real world tests on a daily driven vehicle is the only way to draw true conclusions. Also, NOBODY would test a product for four years before making a video... I hope you realize how stupid that is. By the time you'd be ready to make the video, there would be hundreds of newer and better products. The best thing to do is to apply, show people what the product is about, and do real world updates every now and then when possible.

@candybaldassano1164 8 ай бұрын

max is great and lot new stuff coming down the road too , i like the ceramic coating spray that's coming out better then the Shield Lite spray my self. beta tester here

@PanTheOrganizer 8 ай бұрын

Good to know!

@Dstromb232 8 ай бұрын

WOW, look new!

@PanTheOrganizer 8 ай бұрын

Thanks for watching!

@guymongeon6622 8 ай бұрын

Oh no .. I just ordered Armor Shield IX last night. Ops! Did not see Armor Shield Max on the site . Great stuff . I have the previous coating on my car. Lasted 3 years .

@PanTheOrganizer 8 ай бұрын

Thanks for sharing your experience with it!

@charlesmitchell9647 8 ай бұрын

Hi Pan, I like the Armor Shield Coating the only issue I had was water spotting. This is normal from what I have learned. So I had to put CarPro Gliss as a topper. Then it was better from rain no problem but from the sprinkler system I had to get the car dry soon as I could. I wonder if the MAX will be better at water spotting? I do love the new one coat and dry time.

@PanTheOrganizer 8 ай бұрын

I’ll be looking for things like durability and water spotting issues in my long term testing.

@hutchrt0596 8 ай бұрын

I was looking at buying this but there's not a good enough deal for Black Friday! They give you some free gifts, but that was what they were given before Black Friday. It's still cost $90 anyway, I want to look at it.

@Wishes890 8 ай бұрын

Thst slip up in the beginning was full on funny!

@PanTheOrganizer 8 ай бұрын

LOL

@LeSoldatRyan 8 ай бұрын

Hi Pan, great video. What's the best : glaco or ceramic glass coat ?

@PanTheOrganizer 8 ай бұрын

What “ceramic glass coat”? Be specific on the company name and the name of the product. But one thing is for sure, Soft99 Ultra Glaco is the best glass specific DIY coating I have tested.

@J1Z06 8 ай бұрын

I didn't have good luck with the original version. Maybe I'll try this. Andy's vehicle looks BETTER THAN NEW!!! WOW!!!

@PanTheOrganizer 8 ай бұрын

Yeah he was so happy!

@J1Z06 8 ай бұрын

@@PanTheOrganizer The gloss is a mile deep!! Congratulations to Andy on becoming a home owner!! 🤘🏼😬😎

@PanTheOrganizer 8 ай бұрын

I will tell him that! :)

@acf1376 8 ай бұрын

Great stuff Pan! Would you still consider this also a beginner's coating? I have never done it, so wondering if I can go for it as a first timer or stick to the previous version for my first try.

@PanTheOrganizer 8 ай бұрын

It has more advanced technology compared to their beginner coating (the original Armor Shield IX) but yes, a beginner can absolutely apply the new MAX version, as it's just as easy to apply! If you have applied a wax in your life, you can definitely apply this coating.

@loveandbaconbrian1901 3 ай бұрын

Can you go in direct sunlight after applying it in the shade or do you also have to wait 4 hours for that?

@piperman63 6 ай бұрын

Pan, great video, I have never heard of this brand before. I am very interested in the new G.O.A.T. product. I would love to see what you think.

@PanTheOrganizer 6 ай бұрын

Thanks! If I get enough viewer requests, I'll try to look into it when it's officially released.

@MrMimios Ай бұрын

Excellent demo Pan; just wondering if you can also apply this coating on the kompoloi hanging from the inside mirror of the Mazda. Yeia sou!

@PanTheOrganizer Ай бұрын

Haha bravo opa!!

@dannyboy8644 8 ай бұрын

I used Armor Shield 1x on my vehicle over two years ago and i really love this product. Recently I applied a differnt cermaic product ,and i wish I stayed with Armor Shield. Armor Shield was much easier to apply versus the new product used. I am sticking with Armor Shield going forward. I love the ease of use ,.protection , gloss of armor Shield.

@PanTheOrganizer 8 ай бұрын

Thanks for sharing your experience!

@blake8297 8 ай бұрын

I didn't do 2 coats of the original coating, but I was able to get just a bit over a year out of it. Car is only washed maybe once a month and sits outside 24/7. I was a bit disappointed, but it is what it is. Going to try EXO v5 next. I think the AK GOAT coating was $200 during their early offer or whatever. I'll hold off and see what thats all about...

@PanTheOrganizer 8 ай бұрын

I'm looking forward to test the G.O.A.T. coating and see what that nanodiamond tech is all about.

@abismaellatorre5579 7 ай бұрын

I love your channel and every time I watch 1 of your videos I feel so inspired to go and detail my car. My question to you is, I don't have access to a garage but I can work in the shade all day but since I'm not in a control enviroment what can that do to the curring time?, with all the wind, dust and or bugs that might land on the vehicle before the 4 hours, should I cover the car in any way?

@PanTheOrganizer 7 ай бұрын

Thanks for the kind words. It’s certainly not ideal to apply a ceramic coating outside, but if you absolutely need to, you must follow some basic guidelines: - don’t apply in direct sunlight, only in the shade on a cool surface - don’t apply in temperatures below 50F (10C), ideally being closer to 68F (20C) - make sure you do it on a day with no rain - not a windy day where dust flies all over the place

@cpfb68 8 ай бұрын

I guess I just didn’t read the info on the original Armor Shield product but thought it was a 3-year product and not a 1-2 year. I have a car that lives outside 100% of the time in Atlanta, GA and has gotten a 3-month top coating for the last two years and it finally failed. I’ve re-coated it with the original product and then saw this new product. I may hold off for the upcoming 5-year product. Just need to see Pan’s review of it. As always, great video Pan. Please keep up the great work

@PanTheOrganizer 8 ай бұрын

Thanks! I’m also looking forward to test their 5 year G.O.A.T. Coating.

@projectdipz-idf 8 ай бұрын

Hi , merci pour la video . Il y aura une comparaison avec la céramique cerakote ? J'ai l'habitude d'utiliser avalong king , j'essaie de trouver le meilleur rapport qualité prix

@PanTheOrganizer 8 ай бұрын

Je ne compare pas des céramiques professionnelles à des céramiques grand public. Les deux sont bonnes pour différentes raisons.

@isabelnunez3349 7 ай бұрын

Great video as always Pan! I applied the original Avalon King coating a few months ago and so far so good. Do you have a video that shows how to remove a ceramic coating and prep the car for new coating? Also, I used my original Avalon King on all the plastic inside my car, can the Max be used that way as well?

@PanTheOrganizer 7 ай бұрын

The only way to remove a ceramic coating is by machine polishing. So you would have to redo all the steps from A to Z. Decon wash, iron remover, clay bar, machine polishing, IPA wipe or paint prep spray to remove polishing oils, and then apply the new coating. The AvalonKing coatings are only meant for exterior use.

@giovannia3452 8 ай бұрын

Do you recommend using this coating for all surfaces like you did in this video or should a trim coat be used for trim and this coating for paint etc?

@PanTheOrganizer 8 ай бұрын

Up to you to decide. It's versatile enough to be used on pretty much all the exterior surfaces, so might as well take advantage of that, you'll be saving a crap tone of money. But like any versatile coating, it lasts longest on paint, compared to other surfaces. On glass, wheels and plastics, I expect about 1 year. Time will tell.

@waynespoerre 8 ай бұрын

Pan, what ceramic coating should I use on my newly painted Alpina wheels for my BMW

@PanTheOrganizer 8 ай бұрын

My favourite wheel coating: bit.ly/3kEb073

@dannydaugherty5702 8 ай бұрын

Wow 😮 The results look amazing ☝️👏✨I’m with you I believe a ceramic coated car stays cleaner as well! Congratulations to your Brother Andy on his purchase of his new house 🏠 Now he can keep his car cleaner by keeping it safe in a garage ☝️👏

@PanTheOrganizer 8 ай бұрын

Thanks for watching Danny!

@dannydaugherty5702 8 ай бұрын

@@PanTheOrganizer Oh I try not to miss out on your uploads ☝️😂

@PanTheOrganizer 8 ай бұрын

Let's go!! I hope you are having a great weekend. It's getting quite freakin' cold here in Montreal (0C) already. :(

@dannydaugherty5702 8 ай бұрын

@@PanTheOrganizer I live in the state of Georgia and it’s just starting to get cold 🥶

@user-oc8nj4qv2u 8 ай бұрын

Can this be used over top of vinyl graphics? Having custom race stripes installed and want to ceramic coat after. Thoughts?

@PanTheOrganizer 8 ай бұрын

Yes.

@nicholosk7280 8 ай бұрын

Yasou Pan and Andy, Thank you for the video on Avalonking ceramic coating. Which one do you recommend for someone like me who has never used or applied a ceramic coating - is it this one by Avalonking or Cerakote? Thank you, NIKOS

@PanTheOrganizer 8 ай бұрын

Both are super easy. Pick the one easiest to purchase for you.

@skaga102 26 күн бұрын

Can ie aplay 2 layer, when the time to prep the car is done. To get more/longer protection

@PanTheOrganizer 26 күн бұрын

You’d have to ask AvalonKing

@svetoslavvasilev3282 2 ай бұрын

Great video! What do you do with the rest of the solution as there is only one applicator in the package? I do not see another that can be purchased? Do you use another brand?

@PanTheOrganizer 2 ай бұрын

Once opened, you have about 1-2 months to use the rest of the coating before it becomes unusable. You can purchase other microfiber coating applicators, like these: amzn.to/3QLRrJz amzn.to/4bi7RS6 amzn.to/3wCBOgy

@svetoslavvasilev3282 2 ай бұрын

@@PanTheOrganizer thank you for the reply! I really like your videos and I have learnt a lot. :)

@nascardonjuan708 8 ай бұрын

Which video are you talking about that show the steps prior to applying this ceramic coating? Thank you!!

@PanTheOrganizer 8 ай бұрын

Here's the video where I showed the application of the original AvalonKing Armor Shield IX coating: kzfaq.info/get/bejne/iM2cnJmHs7LXe2g.htmlsi=toAH4bGqO-c3e6fr

@mills271 8 ай бұрын

I like Armor Shield's products, but for some reason I've had a lot of trouble trying to remove them. I've tried different towels, using less product, etc., but for some reason it's still hard for me to remove.

@JT_70 4 ай бұрын

You are waiting far too long before buffing off the haze. I found that I have to buff the haze off almost immediately after applying. If you wait too long it’s nearly impossible to remove the haze. Depending on the temperature, I typically buff the AS IX haze within a minute of application.

@jeffreybowman9221 8 ай бұрын

Hey Pan thanks again for the content you provide. I have a 2021 Hyundai Elantra with black metallic paint that hasn't been washed for over a year and has set out in the elements. My car was detailed right before we moved here and I think he just put a wax coating on. My question is what would I use to strip my paint to the clearcoat? My detailer said I could use Dawn dishwashing liquid for a wash which would strip it down to the clearcoat so I can apply the ceramic coating. Suggestions? Thx kind sir.

@PanTheOrganizer 8 ай бұрын

You would use a stripping soap, like the AvalonKing Strip Wash I linked in the description. I don't recommend using household items on car paint. Dawn dishwashing liquid was a trick used decades ago. Now the technology with good stripping soaps exists. But regardless if you use a stripping soap or Dawn, that doesn't guarantee 100% removal of the previous protection. It just starts the breaking down process. If you still see water beading after the strip wash, you should do a light machine polish step. That's the only way to ensure 100% removal of any previous protection. And after polishing, make sure you use the IPA spray (like the AvalonKing Panel Prep spray) to remove polishing oils and residue, and ensure a proper bond of the coating to the paint. I have covered this topic extensively in many videos on my channel.

@jeffreybowman9221 8 ай бұрын

Thx kind sir. 👍✌

@jeffreybowman9221 8 ай бұрын

Thx kind sir. 👍✌

@sipock97 8 ай бұрын

You had the original Shield9 on the car. Did you polish the old off first, or over the original? I literally have the original and was planning to put on today, but now thinking about ordering the new.

@PanTheOrganizer 8 ай бұрын

I explained it in the video. In this specific case, as we knew there was no protection left, all that was needed was a decon wash with the stripping soap, iron remover, claybar, and IPA wipe. The paint had no crazy swirls or scratches and we want to preserve as much clear coat as possible, so polishing wasn't needed here. But if you still have paint protection left (if you still see water beading on the surface) or need to remove swirls and scratches, then yes you'd machine polish the surface, then IPA wipe, then apply the coating. This will allow the coating to properly bond to the clear coat.

@jasonfitzgerald8559 8 ай бұрын

So is AK one of the more enthusiasts friendly coatings to use if you're not a pro detailer?

@PanTheOrganizer 8 ай бұрын

Correct. They are the easiest ceramic coatings you can apply in the DIY category. Nowadays, many brands are catching up with ease of application, but when the original AvalonKing Armor Shield IX coating was released many years ago, it was the easiest coating to apply by a long shot.

@pickels198 5 ай бұрын

Looking for experience with the Armor Shield G.O.A.T. product. Will application be similar to MAX, flash time, easy leveling, etc.?

@PanTheOrganizer 5 ай бұрын

I haven’t tested the GOAT yet.

@jngtruong 8 ай бұрын

Looking forward to test this out when my Armor shield 9 wears out. I applied in 2020 and my car does get park in garage at night so the 9 is still hydrophobic until today. Btw: what are you using for tire shine?

@PanTheOrganizer 8 ай бұрын

Good to know. Here’s the tire dressing I used in this video: bit.ly/2ZXCKt3

@JaboDon 8 ай бұрын

Winter is coming soon so should getting a full detail and ceramic coating be done now or after the winter season

@PanTheOrganizer 8 ай бұрын

It's always best to have the protection from day 1 as soon as you take delivery of a new car. So if you haven't applied protection on your car yet, then yes, absolutely do this now. Your paint will be protected over the winter months.