PARKSIDE 20V lithium battery repair

Рет қаралды 59,468

2 жыл бұрын

Пікірлер: 42

@ErCanEverything 2 жыл бұрын

Good battery repair video, well done👏🙂🤝🤝🤝

@RefurbishmentKJ 2 жыл бұрын

THANKS😆

@SnekSnack 2 жыл бұрын

You need to use cells with similar resistance and capacity. 25-R are 2500mAh, old cells are 2000mAh (New). There will be problem with balancing. You should use Samsung 20R or something similar as replacement.

@RefurbishmentKJ 2 жыл бұрын

Thanks for reminding

@davey2k12 2 жыл бұрын

I've recharged a few that 1 cell went too low and wouldn't charge and don't look like the BMS balances nothing just a protective circuit less there's a new version .... Put what ever cells you want in there cus the 2ah ones am pants anyway

@MrGodsking Жыл бұрын

@@RefurbishmentKJ can you upgrade mine if I post to you they are all new but faulty

@orlatris96 2 жыл бұрын

Excellent, I loved your work. Highly didactic, perfect. Thank you so much for sharing this simple work. If possible, could you tell me what liquid you used to clean the plastic parts? A hug

@RefurbishmentKJ 2 жыл бұрын

We use car engine compartment cleaner, which is called nose water here. I don't know what to call it in English. Good degreasing and decontamination effect.

@mcirelandosharma7411 Жыл бұрын

Carb cleaner would be an automotive name for it 👍

@silverxiree Жыл бұрын

@@mcirelandosharma7411 no it is not the same thing. carb cleaner would ruin the plastic parts. this solution is called in English exactly engine bay cleaner or engine compartment cleaner.

@Erdie65 7 ай бұрын

Great video! Just a question: How did you weld the contacts to the liIon cells. Which tool do you use for it?

@RefurbishmentKJ 7 ай бұрын

Thank you！It is welded with a spot welder.

@MrNickadu 6 ай бұрын

Excellent work ... well done !!! I wanted to ask you, what SPOT WELDER did you use to make the electrical connection to the batteries?

@RefurbishmentKJ 6 ай бұрын

The spot welding machine is made by myself and is controlled by super capacitor and mos tube.

@MrNickadu 6 ай бұрын

@@RefurbishmentKJ Thank you for your answer. Do you have a video of your construction of spot welding machine ?

@ghostalpha6873 2 жыл бұрын

hello, good job you did there. but I'm not sure it's a good idea to replace only 2 cells with different cells, it could cause problems in the future. that said, it's a nice repair

@RefurbishmentKJ 2 жыл бұрын

Thanks, that's not right, but I don't have any other batteries.

@Bianchi77 Жыл бұрын

Creative video, thanks for sharing :)

@RefurbishmentKJ Жыл бұрын

😁

@wizzardrincewind9458 2 жыл бұрын

good work!

@RefurbishmentKJ 2 жыл бұрын

Thanks!

@nothingbutthetruth7900 11 ай бұрын

Is it not better to just replace with same amp hours cells so theres no balance problems?

@RefurbishmentKJ 11 ай бұрын

I don't have a battery with the right capacity.😅

@greennich777 2 жыл бұрын

Good job 🥰😍🤩🥰😍🤩

@RefurbishmentKJ 2 жыл бұрын

thank you

@ZangerMarvin19 Жыл бұрын

Wat machine you use to connect the connection plate back to the battery cell? Looks like point welding but i need to know wat is the name of it machine

@RefurbishmentKJ Жыл бұрын

It's a spot welder

@ComputerTechNL 4 ай бұрын

Use the orginal nickel strip that you use is why too thin

@MacStrange 2 жыл бұрын

Really good

@RefurbishmentKJ 2 жыл бұрын

thank you

@kestans 2 жыл бұрын

Hi, it I have received 2Ah battery, manufacture in 2018. It volts are ok but it was not charging (red and green blink) then it drill only works for 1 second and shuts down until next push of button . I measured all cells was perfect balance. I then removed pcb and on other side found one track damaged it was a cell connection to balance circuit, after solder back it then started to charge but after 5 minute of charge it then again green and red led blinking and still same it after one second it drill shuts down. what can be wrong....

@RefurbishmentKJ 2 жыл бұрын

Some boards are protected and have a short circuit before that can cause the PCB to lock up. This fault seems to be a bigger problem with the pcb.

@florinmunteanu1670 Жыл бұрын

Metti link con tutti prodotti che h ai utilizzato per riparare questa batteria....sarebbe comodo per noi ...così compriamo pure noi tutti materiali .....così cerchiamo di riparare pure noi una batteria....grazie

@mandamados 2 жыл бұрын

never use batteries with different capacity, they charge and discharge with different rate

@RefurbishmentKJ 2 жыл бұрын

Thanks for the reminder, I will pay attention to the battery next time.

@nelchan2421 22 күн бұрын

please don't add cells with higher capacity

@achimgazelle3641 Жыл бұрын

Is it also possible to fit 5x Panasonic NCR18650B 18650 3400mA? That would theoretically be 17A strong or am I wrong?

@XSAILOR65 Жыл бұрын

Wrong. 5 will give You 3,4 A, with 10 (5s2p) of those You will have 6,8 A. NCR18650B has too bad max discharge current, not working in this application.