🤣🙂🤝

This is the second case, the first was with a friend who had bought a new one and was constantly throwing a chain, and we improved his in the same way.

​@@ErCanEverythingYou executed that well. I have done a similar ''motor angle alteration'' on a cordless bandsaw from Makita. The bandsaw was droping the blade and yeah, washers to the rescue.

Thank you for the kind words my Friend🙏🙂🤝

Нали знаеш, винаги избирам по трудното и понеже ме мързи да ходя до града заради 1 шайба. Но ако беше в съботен ден когато имаше битак, със сигурност още сутринта щях да съм там🤣

Thank you my Friend🙂🤝

This is second hand but a friend had bought a new one B2 version which had the same problem. But my first one was an A1 I was very happy which I sold it. I don't know if the performance series have a same problem, and it could be due to a very tight chain I do not know🤷

@@ErCanEverything Chain tension problem is like on b2 gasoline version-sprocket that runs the chain isnt concentric.Or the sprocket on the chain guard isnt concentric .So one part of chain is loose and other is super tight. Quality control is crap on parkside tools.

In my B2 (although I don't know if it has the same IAN number as yours) this washer on the sprocket does not have a completely round hole. It is round at the ends and with extended sides. It fits onto the end of the motor shaft and rotates with it. The chain doesn't fall off that easily. Although the quality/hardness of the metal is equally poor. BTW, do you know where to get this integrated electronic module? The Chinese have something similar, like the one for an angle grinder that you replaced in one of your videos?

I haven't bothered with this because I don't mind the feature🤷

@@ErCanEverything I understand, but you have to understand if you cut a lot the soft start is really annoying and takes much time, because you have to wait every time s couple seconds until the same has full revolutions.

Soft start helps increase batttery life and prevents premature hardware wear.

@@VitorMadeira Good luck with soft start when you are in the woods and you want to finish cutting the wood as fast as possible. Work time is more expensive. Is your time nothing worth for you? Sometimes I don't understand people. This isn't a saw for thousand's of dollars. Priority is finish the work.

​@@hanf022 Parkside tools are not intended for professional use. It's a supermarket brand (Lidl) intended for end users in their spare time hobby, so they prepare those machines to be light and cheap and they say it in the users manual. Slow and home made work. Have a good life.

Teşekkürler komşu🙂

I think they pay less for quality control🤷

And much more for Arnold😅

@@ErCanEverything 😂🤣😅

Quello è grasso al silicone.

Teşekkür ederim. İnşallah buna benzer 1 tane ben de yaparım🙂