How to Size a Bicycle Chain

Рет қаралды 3,103,491

Күн бұрын

Replacement chains for bicycles are always longer than you need. This video will take you step by step through sizing a bike chain, including determining whether your old chain was correctly sized, sizing to an old chain, and the largest cog & chainring method, as well as some exceptions and considerations such as rear suspension and chain guides.
Questions or comments? Leave them below!
See all our chain videos in our chain repair help playlist ▶︎ • Repair Help: Chains
Video contents:
00:39 Tools Needed
00:57 Check & Remove Chain
02:57 Sizing to Original Chain
04:01 Sizing to Largest Cog & Largest Chainring
06:26 Exceptions & Considerations
➤ Tools & materials used:
• MLP-1.2 Master Link Pliers - www.parktool.com/product/maste...
• CT-3.2 Chain Tool - www.parktool.com/product/chain...
• CT-4.3 Master Chain Tool With Peening Anvil - www.parktool.com/product/maste...
• New Chain
• Marker
• Repair Stand - www.parktool.com/category/repa...
• See all Park Tool chain products - www.parktool.com/category/chain
For a text-based walk-through of this process: www.parktool.com/blog/repair-h...
➤ Subscribe: kzfaq.info...
➤ Like: / parktool
➤ Follow: / parktoolblue
➤ Fix It:
Did you know that Park Tool is the #1 resource for bicycle repair education?
• Visit our KZfaq Channel: / parktool
• Visit the Repair Help section of Parktool.com: www.parktool.com/blog/repair-h...
• Check out The Big Blue Book of Bicycle Repair: www.parktool.com/product/big-b...
➤ About Park Tool:
Since our founding in 1963, Park Tool has been the leading name in bicycle tools. Our KZfaq channel is an extension of our mission to be the ultimate resource for mechanics and riders of all skill levels. Here you will find comprehensive repair help tutorials for a wide range of components and processes, as well as troubleshooting guides, tips and tricks, and information on the latest Park Tool products.
➤ More Chain Repair Help:
• The Park Tool Guide to Chains ▶︎ • The Park Tool Guide To...
• How to Clean and Lube a Bicycle Chain with a Park Tool Chain Cleaner ▶︎ • How To Clean and Lube ...
• When to Replace a Chain on a Bicycle ▶︎ • When to Replace a Chai...
• How to Fix a Broken Bicycle Chain ▶︎ • How to Fix a Broken Bi...
• How to Replace a Chain on a Bicycle - Sizing & Installation ▶︎ • How to Replace a Chain...
• How to Replace a Chain on a Single Speed Bike - Sizing, Installation & Tensioning ▶︎ • How to Replace a Chain...
• How to Size a Campagnolo Bicycle Chain ▶︎ • How to Size a Campagno...

Пікірлер: 1 000

@David.. 4 жыл бұрын

See you in a few months when I forget this shit again for the millionth time.

@tadas6053 3 жыл бұрын

my thought exactly :D

@scrtchmrk4958 3 жыл бұрын

You're not alone

@wallaberto 3 жыл бұрын

Welcome back, good to see you again :D

@friskiii1 3 жыл бұрын

@@scrtchmrk4958 iii

@newboysgeneration6198 3 жыл бұрын

Hhhh Tottaly honest and true😄😄

@wadebesack4393 5 жыл бұрын

If there were awards for KZfaq videos, Park Tool would win hands down in the "How-To" category. They are clean, consistent, professional, clearly scripted, well organized, step-by-step...I could go on and on. Excellent way to promote the purchase of high-end tools and ensure happy customers after the sale, having empowered them to do the job right. If I owned a bike shop and hired a new mechanic or had an employee wanting to transition into that position, I would point them to the Park Tool channel and say "watch every video, then we'll let you start touching the bikes". Great as usual.

@borrisjung8049 4 жыл бұрын

One of the best part is PT is making you aware of possible mistakes and exeptions, I like that a lot!

@abu1950 4 жыл бұрын

@@borrisjung8049 Their tools are super awesome too, does anyone know where to get the tool hanger

@HardwareUnknown 3 жыл бұрын

You took the words, every single one, right out of my mouth. From making me want to purchase their tools to support them, to using this as a reference for new hires, Park Tool nails it each time.

@micromadnessman 3 жыл бұрын

There's a big brand bike shop near my house, and the mechanics have PC screens behind the bench. I looked back there one day...all park tool tutorial videos. Even great for professionals to get a clear and quick reminder.

@joshdonley2842 3 жыл бұрын

Calvin has always sounded a bit patronising to me.

@HardwareUnknown 3 жыл бұрын

Calvin is this best bike service teacher I've found on KZfaq. I've nearly finished replacing my entire drivetrain for the first time from his videos. Others have said it before; this is the kind of value added benefit that a company can do to make me want to support them by buying their products. Granted it would be one thing if the tools were awful, but Park Tool stuff has consistently held up much better than cheap alternatives. For the premium, I'll take the better tools and support the consistently professional videos. Thanks Calvin and Park Tool!

@mindfever6285 6 жыл бұрын

this guy is such a boss

@AndrewBlucher 4 жыл бұрын

Calvin

@thomashardbattle4287 3 жыл бұрын

Calvin is the man

@escapegoat32 3 жыл бұрын

He is the boss

@timmusk9939 3 жыл бұрын

He knows what he's doing he's been riding since he was two years old

@chriscyrelestil304 3 жыл бұрын

Read his book, the book is very good.

@redrocker1055 8 ай бұрын

Park Tools are expensive, I get it. But everyone should try to purchase at least one item from them to show appreciation for the knowledge they share we these videos. Park Tools and RJ The Bike guy are the two quintessential KZfaq channels every cyclist should follow.

@johnhenrick2298 2 жыл бұрын

I note the 563 down votes and I wonder why. Are those down voters more knowledgeable or better mechanics than Calvin? He makes excellent videos, the very best! I appreciate his clear, concise instructions.

@bakedpotato8602 Ай бұрын

Thank you so much Mr. Calvin Jones and to the park tool team! You've helped me so much to the point I'm capable of being able to independently service my bicycle! Thanks to your wide array of impeecable video guides, I was able to get a blown inner tube replaced when I was at least 10km away from the nearest bicycle shop! Another incident, I was able to cruise back home with a bent derailleur hanger from a crash, by readjust my derailleur indexing and limits! Besides, I just got my bicycle chain resized to have less chain slap and probably reduced 10 grams of chain's weight! After learning how to correctly cut and size the chain here 😊😊

@Braindead19442 2 жыл бұрын

As a total beginner I have watched many KZfaq videos. I have to say that your site is the most uderstandable site to watch. You use simple, easy and precise language, without all the unnecessary waffle that I see on many other videos. Thank you for a site that I can understand and follow with ease.

@lumpythefish 4 жыл бұрын

Honestly... the single best How-To vid I've ever seen on You-tube. Kudos to everyone who worked on this gem.

@masaharumorimoto4761 11 ай бұрын

THANK YOU! Just completed my 1st sizing a new chain, delinked 5 links and it was a complete success :) Chain looks perfectly sized now and no more loosy-goosy :)

@BMH1965 7 жыл бұрын

One of the best instructional videos I have seen on KZfaq or anywhere else - clear view of area and clear instructions, and with variations to standard systems.

@adamscotera2378 21 күн бұрын

Thank you! I didn't have an old chain to compare and had no idea how to proceed, but watching this once made it clear. Much obliged!

@1974kenm 3 жыл бұрын

Thank you. These videos are incredibly helpful when I go to do maintenance/repair and the technology changes. Also, I started acquiring tools from Park when I was working in bike shops in HS and college. Now in my 40s, they still work great, still have warranty, and have been worth every penny.

@tomaskotulek7179 6 жыл бұрын

Great video! After days of reading of "how to size the chain" I'm finally able to do it by myself without a fear of doing something wrongly. Thank you.

@virkelie2 4 жыл бұрын

What I like about these Park Tool videos and Calvin Jones is that the repair videos are very clear and specific. For instance other videos also say to add 2 links in sizing a chain; - but are unclear how to count a link. Calvin Jones is very specific and clear, so that you don't need to guess how to count 2 links.

@reggier2343 Жыл бұрын

This really helped me. First time replacing a chain. Tiagra 10s. Before I watched THIS video, i watched another video and I didn't pay attention to the details. I opened my new chain wrapped it around the sprocket and the cassette put the pin in and linked the new chain. Couldn't figure out why the chain was so loose. LOL So realizing my dumbness, and that I couldn't reuse that pin, I ordered a set of pins. In the meantime I found your channel. I watched the chain install and chain resizing 5 times each. Resized the chain, installed the new pin. Everything is good. Going to watch the videos on rear-derailleur adjustments and then ill hit the road. You guys also showed me that my brand of bike tools where trash.

@celticwinter 2 жыл бұрын

If people want to know how to make good "how to" videos, they should look at this series. Cutting, illustration, guidance and explanation. Just excellent.

@righteousone8454 3 жыл бұрын

Thanks, Calvin You have educated me quite a "BIT" now, from changing cassettes, to sizing chains. I really appreciate your videos, good Sir Cheers

@gsxrinfrance5827 5 жыл бұрын

Learned so much from you guys at Park Tool, serviced /replaced front and rear wheel bearings, replaced gear cables, cassette remove and clean, chain replacement plus adjusting front and rear derailleur. ...your videos are appreciated, Thank you....

@Itsshowtimecheer 3 жыл бұрын

I hope my bike shop follows this guy on KZfaq.

@MichelOcampo 5 жыл бұрын

this video wasnt really what I was looking for because I was searching for the wrong thing BUT I must accept that I watched the whole video just because of the good quality of it, I was suprised of how well explained it was, highlighting and showing examples of your explanation, just perfect! I wish there was more channels (tutorials) in youtube like yours. well done sir

@tonydeady3413 3 жыл бұрын

This is the best video on chain sizing! Clear and precise instructions and explanation. I watched about six videos before this one and they all left me more confused than when I started. From one teacher to another, thanks!

@scottsprojects658 Жыл бұрын

4:00 Sizing: Largest COG & Largest Chaining Method is what I needed. Thank you!

@haubitze 27 күн бұрын

Why has this video only 3 mil views until now??? This is brilliant!

6 жыл бұрын

Fabulous video!! Clear, concise with excellent tips and close-ups.

@Aaron40117 7 жыл бұрын

Brilliant, Best video on the subject currently on youtube. thanks guys

@unitedeurope8614 Жыл бұрын

The guy is just great. Just focused on the relevant stuff. No unnecessary talk. I only watch park tool videos - and then buy their tools :-)

@TurkeyManIndustriesLLC 2 жыл бұрын

I love these videos. A wealth of knowledge surrounding bicycles. And as far as learning how to maintain something goes, bicycles are at the top of the list. One of the coolest inventions of all time.

@kevinhornbuckle 4 жыл бұрын

I just got my ParkTool chain tool from a bike shop in downtown Eugene, Oregon. Now I know how to use it.

@jesseblack6083 6 жыл бұрын

Calvin your videos are awesome! Very clear and concise. Thanks brother!

@DJKLIBRA 3 жыл бұрын

Thanks to the people of park tool I had no issues replacing my chain after my old one snapped in two yesterday. Threw it in the bin at the side of the road so had no comparison for my new chain. Very calm and clear instruction. Measure twice, cut once. Instant succes. Thank you Park Tool! By the way, your chain cleaner device also works like a charm, so as your Alan keys. Quality guaranteed with Park Tool. Greetings from a very satisfied customer.

@richarde1355 3 жыл бұрын

I love the subtle use of the blue “Park Tool blue” Sharpie to mark the reference link. Yet another super quality Park Tool video!

@petecurran3995 7 жыл бұрын

Excellent vid - all bases covered! Thanks Calvin! 👍

@backpacker3421 5 жыл бұрын

Calvin, I didn't watch this video, because you've already taught me to do this several times over. But I did want to drop a note to thank you for YEARS of teaching me how fix bikes. The Big Blue Book was where I learned first. I still have a copy that is in such bad shape I don't know if can ever use it again. It's seen beyond dog-eared... All the KZfaq videos have been a blessing as well. Nearly everything I know has either been from you or from mistakes I made because I forgot lessons you taught. THANK YOU. Have a wonderful 2019!!!

@tomaburque 11 ай бұрын

This channel comes in very handy from time to time.

@hovadopn 3 жыл бұрын

I repair my road and mtb always at my own, but if i am not sure about something, i watch Calvin 😎. Better than any teacher.

@myshihtzudontstink 6 жыл бұрын

Great video. I just watched this as I was doing mine. Got me through it without any confusion and my chain is right on! Went from a 11-23 to a 11-26 so using my old length wasn’t an option.

@MrJadiin 5 жыл бұрын

Look if you're not spending 10 minutes swearing out loud trying to break the masterlink by hand are you even really trying to be a DIY bike mechanic?

@joekelly3849 5 жыл бұрын

Like John Doe’s comment. Back in Limerick, we used to break chain by lying the bike flat on the ground. Put the chain over a net and hammer the rivet out with a steel nail hammer and skinned knuckles.

@joekelly3849 5 жыл бұрын

John Doe ✊

@lmullen06 5 жыл бұрын

It’s actually really easy by hand, can be done in about 5 seconds by just pinching master link plates together before the usual first step, there are some videos out there on this method. Calvin and these Park Tools videos are pretty much the best out there but I was surprised this method wasn’t mentioned.

@SsomebodyTookMyName 4 жыл бұрын

@@lmullen06 I think it depends upon your master link, some are designed to be reusable/removable and others are effectively single use (the latter clip together securely) The link that shipped with the Shimano chains I've bought recently have been noted as non-removable on the packaging

@tsmith1487 5 жыл бұрын

Another spot on video. The perfect amount of information presented clearly with excellent visual aids. Thanks.

@alfwilliams5446 3 жыл бұрын

Did the big-big and add two rivets technique and it all worked really well. Thank you.

@Joozt112 6 жыл бұрын

Riveting stuff!

@peser71 6 жыл бұрын

Best video i wached about how to size a chain. I am now a new subscriber

@trekimpossible2850 5 жыл бұрын

My road bike has Shimano system. I followed the instructions, especially the way 4:02 for chain sizing, to replace the chain myself. Went out to ride for 40 miles with 2000 feet elevation gain, no problem. Thx for the tutorial.

@brodtstuff 6 жыл бұрын

One of the best videos on KZfaq! Well done in regards to information and instructions.

@jeffscomp 5 жыл бұрын

good video. I was able to resize a new chain using the old chain and the video guide :)

@M1nius 6 жыл бұрын

after washing this :D I will try to repair my bicycle for sure. It rested 2 years in the cellar but now it won't. Wish me luck :D

@dustinsupencheck 4 жыл бұрын

Did you fix it?!?!!?

@KnightMirkoYo 4 жыл бұрын

Dude, don't be lazy. Fix it up, go out and ride!

@AbdullahKhan-se1xz 9 ай бұрын

Did you fix it?????

@stephenmace8436 4 жыл бұрын

Outstanding video, having watched this explanation park tool will be my "go-to" channel for bike maintenance.

@MultiVde 19 күн бұрын

Thank you Calvin, I've successfully changed my chain and crank thanks to your tutorials.

@Theclaw17 6 жыл бұрын

Thanks for the video explanation, excellent!

@idezilla 6 жыл бұрын

Thanks, great info!

@RGCastro7 6 жыл бұрын

Excellent tutorial, Calvin and Park Tool. Thank you for sharing!

@Durwood71 Жыл бұрын

I just replaced a worn chain and instinctively used my old chain as the reference, but this is good information if I ever need to replace my chain and don't have the original to compare it with.

@rossross5620 5 жыл бұрын

Just perfect as all the video tha you make thank's a lot for sharing it really worth a lot to me at to many other people My best wishes for the future :-)

@nukenomad6503 3 жыл бұрын

My last chain had way too much sag so I went with the largest cog, largest chainring method on my shimano XTR 1x11 full suspension and like magic, my chain was the perfect length, no sag. Thanks for the expert advice.

@harjak999 3 жыл бұрын

Did you add the 2 or 4 extra chain links?

@Synysterjmz 2 жыл бұрын

I did the same upgrade and ended up with a chain that was too short. 4 rivets just about works for a medium cage derailleur, but still seems a tad too short.

@neytiritetskahamoatite7688 7 ай бұрын

1:12 This means at least 122 chains links on my frame, and you don't find 122 chain links on the market ! You find mostly 118 !!! (extremely rare) Regularly 114 ! So i FK-ing need to compose 2 chains !!! luckily for u (or not , hahahaah) I know how, without spending any consumable bolt, but just reusing a chain link, making it working again with a hammer and a rock 😊😁😉

@Benjamin-iu9iu 2 жыл бұрын

Thanks so much, I had a feeling my chain was incorrectly sized. This video gave me the confidence to get the tools and do the job. Unfortunately I paid a mechanic to install my chain and rear cassette a while ago, I wish I did it myself now.

@coppermouse100 4 жыл бұрын

Your videos are the best bike repair videos hand down. Thank you!

@SkidinDingo 6 жыл бұрын

i've seen people use boot lace or 550 paracord to break masterlinks, too.

@joekelly3849 5 жыл бұрын

Couldn’t be more cogently explained😎

@JJ-ws3zn 4 жыл бұрын

Just use your fingernails. Always works for me, I saved however it was for the tool

@robivlahov 4 жыл бұрын

Copper wire works well to :)

@adriansue8955 7 жыл бұрын

Regarding the 1X drivetrain. Your example stated SRAM - add 2 full links (4 rivets). Is 1X for Shimano different?

@tomasstach1162 6 жыл бұрын

I need anwer for that too

@Mekhanic1 6 жыл бұрын

SRAM has larger wheels on the derailleur. You could try 2 rivets or 1 full link on SHIMANO

@parktool 6 жыл бұрын

In shimano's instructions they say to add 2 inks(1 inch) just like in a 2x or 3x.

@sloemost5809 5 жыл бұрын

Park Tool - does that (Shimano instruction - 2 links / 1 inch) mean 3/4 rivets? Again, same question as above - Shimano 1 x. Thanks.

@VisionExplo 6 жыл бұрын

Thanks for the clarity on full suspension bike

@PeterAndrewH 4 жыл бұрын

I've been panicking about installing a new SRAM groupset for fear of sizing and breaking the chain incorrectly, this gentleman (Calvin) just nails it for clear concise instructions. Now I feel confident about giving it a go. Thanks.

@Synysterjmz 2 жыл бұрын

Pfft, I was in the same boat upgrading from an 8 speed BoxFour to a Shimano 11 speed groupset on my Vitus Nucleus. If, like me, you follow this guide, you'll end up with a chain that's too short. As far as I can tell, sizing a chain is complete guesswork.

@zygmuntthecacaokakistocrat6589 7 жыл бұрын

Or just use a master link (of the correct width) for every chain, and keep the pins for subsequent repair, or BB gun ammunition. This makes proper chain hygiene a lot more approachable.

@Aquietas01 7 жыл бұрын

Thanks for a great video. Quick clarification question, regarding full suspension bikes, when you say "use the same system" does that mean that for sram 11/12 speed on full sus you add 2 rivets, or will you add 4 rivets as per the previous hardtail installation of the sram chain?

@tytanbiker5225 3 жыл бұрын

... quiTe confusing ... sram 11 and 12 speed sysTem on hardTail seT up should add 4 riveTs while on full suspension seT up wiTh The suspension fully compressed should only add 2 riveTs ?..

@agustinc6102 2 жыл бұрын

@@tytanbiker5225 yeah because the chain line is lengthened when the suspension is compressed, so that lengthening already accounts for the 2 extra rivets on hardtail.

@cookeecutkk 5 жыл бұрын

Great video. Makes the process easy to understand and is shot / lit well enough to be able to spot all the details.

@Leentje1963 5 жыл бұрын

Super instruction!!! Great help, considering the remarks on 11-speed & full-sussers!! Very helpful, thank you!!!

@abedfo88 4 жыл бұрын

I tried to use one of those calculation algorithms but it was waaaaaay out

@hamleyn 3 жыл бұрын

Likewise, my chain ended up way too short. Will definitely be using the largest chainring-largest cog method next time

@medawc519 6 жыл бұрын

I disagree that replacement chains are ALWAYS longer, than we need. Typical off the shelf chains are 114 or 116 links long. In my touring bike I have pretty standard 48-26-26 triple crankset with 11-34 cassette and pretty long chainstays - 460mm. That configuration requires exactly 116 links of chain, so no cutting needed. Actually I need to be careful not to buy the too short, 114 links version.

@parktool 6 жыл бұрын

Good point. There are exceptions to every rule, including this one.

@markholm7050 6 жыл бұрын

Same situation on my wife’s bike.

@seymourtompkins 5 жыл бұрын

Mark Holm well, we all know about her !

@gregdonnelly7228 3 жыл бұрын

Thank you thank you thank you! Broke and lost original chain on my MTB. Really want to get this right. The instructions are very thorough

@benanderson8294 2 жыл бұрын

Thank you so much! I realized my chain was a link to long (chain was rubbing derailleur on smallest sprockets) and was able to get it fixed! Thanks so much!

@Jump-n-smash 11 ай бұрын

These videos are SO GOOD. I'm a park tool fan now.

@MrSchattka Жыл бұрын

Followed the recipe for a 1x12 drive train. It worked well. Thanks Park Tool for this content.

@persiathiest1963 3 жыл бұрын

This is an example of hight quality presentation. I love the way details are visualized at @5:16.

@allthingsbike2720 3 жыл бұрын

Thank you very much I was going to take my bike to my local bike shop but came across this video and fitted and sized the chain myself. Excellent content

@waltertruenorth 4 жыл бұрын

Thank you for showing this procedure, good details.

@byefromalgeria2960 Жыл бұрын

*I always say it... This is the best channel in KZfaq history🙏*

@fhowland 3 жыл бұрын

The Park master link pliers is one of the best tools I’ve ever bought. Don’t know how I lived without it.

@raulespinoza5819 3 жыл бұрын

I have the IceToolz 62d3 master link, works flawlessly (for closing and opening links)

@Saxtoo Жыл бұрын

Calvin, my 1980 Raleigh racer started jumping its chain in 1st gear. Chain was factory fitted. I split a link, removed it, added a master link in place, then measured it using your system. I know your method works as I have already used it on other bikes. So, when I measured my racer's chain, I found it was fitted 2 links too long. This is crazy, since it's a factory mistake. And Raleigh built it, in Halesowen, Birmingham, UK.

@martinschneider4 3 жыл бұрын

Very good explanation! Especially the inserted coloured arrows were helpful. Now I am no longer concerned to size my new chain. Thank you!

@psoon04286 6 жыл бұрын

Top notch how-to video. Professionally presented.

@siddacious 5 жыл бұрын

This video is so much better than the others I've seen on the topic. Kudos! I'll keep buying park tools to support great content like this.

@Nithael_ 11 ай бұрын

This guy Calvin Jones is incredible…such a wealth of clear, concise knowledge. Thanks Calvin!

@benaya6 3 жыл бұрын

Calvin Jones re-defines professionalism. amazing.

@serendipityrecordco9380 2 ай бұрын

I have a Deore mullet groupset inbound to throw on my son’s 24” bike. I’ve only ever sized chains based off the old ones so this was the right information at the right time. 👍

@scottfabel7492 3 жыл бұрын

One of the best videos I've seen. I have a Sram 1x12 full suspension and the end of this video helps a lot. Thanks Park Tool!

@TomMSTie1138 3 жыл бұрын

Thank you, Park Tool! I'll never worry about the size of my chain again!

@ruvrandomusefulvideos Жыл бұрын

Very precise instruction, size my chain on my 2015 Stumpjumper following the simple steps on this video, thank you.

@towhee7472 4 жыл бұрын

Totally gonna start buying Park Tools, just because of these amazing videos. These instructions save me tons of money.

@theeuropeancyclepaths8206 2 жыл бұрын

I wish you lived in Cyprus. I’d bring my bike straight to you every time

@christianb7 2 жыл бұрын

Great video. Super clear and helped me do the job easily. Thank you

@douglasdye6221 2 жыл бұрын

Excellent, comprehensive video. Thanks very much Calvin!

@markgrant4087 7 жыл бұрын

Park Tools video always well done, very clear and helpful!

@n.sirois578 6 жыл бұрын

Thanks for your help with different systems!

@banditrider613 7 жыл бұрын

brilliant, made it so simple to understand and then implement on my bike ,wont bother following anyone else for my bike instruction . thanks

@CedricSantizo 6 жыл бұрын

did the sizing largest cog vs largest chainring and it worked nicely!

@96gts 4 жыл бұрын

These videos are a master class in how to do a good instructional video. Keep them coming!

@Durwood71 Жыл бұрын

Also a master class in how to service your bike!

@zarko_mkd1780 7 жыл бұрын

Excellent demonstration THANKS!!!!

@andy56730 5 жыл бұрын

so helpful and informative with clear and concise visual guide's excellent video as always thanks park tools

@ggillesp1 2 жыл бұрын

Excellent Job... Very clear and easily understood. Thank you!

@tatangsm09 Жыл бұрын

It becomes easier after having such explation above, especially for 1x12 speed bike with rear suspension. Thanks alot.

@kaigronlund8217 4 жыл бұрын

Park tool videos are indeed great! One note on this video however! Make sure you watch it ALL they way before cutting. I was just about to cut, but fortunately decided to watch the video all the way through. There are a number of exceptions, which are mentioned only at the end. Most notably full sus and hardtails with SRAM 11/12 spd.