Thank you! Glad you liked the video and the blind too 👍

Ah cheers Paul 👍 Thanks for the comment and checking out the videos 😀

Hey! Thanks for the comment and checking out the video!

Thanks Angela! Hope you still enjoying your Van too 👍

Thanks really kind of you to say Kwinchco and for taking the time to watch and comment 👍

Cheers Darren 👍

Yeah a good solution - I am sure I saw the original idea on another channel but not seen them in a custom so gave it a go 👍

Nice one cheers Rob 👍 thanks for great comment and checking out the video 👍

Thanks Terry 👍 Yeah happy with how they turned out 😃 Work really well

Hey there! Wow thanks for the comment 👍 I have to confess I did see the idea somewhere else but not seen in a Transit Custom so gave it a crack! Thanks again and all the best… 😃

Great job does ikea do them for rear windows or do you have to cut them down

@@chriscurl8162 hi mate - I think they do a smaller blind but I am not sure if they would fit the rear window. I only did the side windows on mine as I don’t have rear windows. Smallest width is 60cm looking at their website www.ikea.com/gb/en/p/hoppvals-room-darkening-cellular-blind-grey-10386431/

Thank you!! 👍

Ah great thanks for checking out the video and the kind comment! Good luck on your fitting too 👍

Hey there 👋- Ah thanks for the comment and checking out the video. Not been called genius before 🤣 However that is super nice of you 👍

Thanks for the comment.. Would the US term be conduit maybe? Not 100% sure?

Hey Kris 👍 ah cool! Not done the sliding door side yet - but I did check and there is a smaller blind that fits inside the window aperture and then the process should be pretty much the same 👍

Thanks for the comment and checking out the video 👍 I haven’t got to the sliding door but I do have a plan to.. same approach really but the blind is narrower to fit the window aperture in door.. I hope the same idea will work in the Traffic too! Good luck with it 👍

Sorry have to do this… I have been expecting you Mr Bond 😀 on a serious note… thanks for the comment and checking out the video… I am not sure if IKEA class then as 100% blackout but to be honest when using they do pretty much give us full darkness… On the fly screen…no but that’s a good idea! I’ll have to think about that for v2… I am still saving for a new van hence why I haven’t done much new content… but as soon as I do I’ll think about the fly screen 👍 cheers again and all the best

Ah cool thanks Kenny 👍 Yeah pretty good hack I thought… glad you got one on your build too 👍 I can’t claim the original idea but happy with how my version ended up.. Ha the broken shelf… I think my wife picked these up from home bargains or somewhere like that? It was a longer one that we cut down to two pieces 👍

@@TransitCustomCamper cheers for the reply. I have a home bargains just down the road so I'll take a look. One final question if you dont mind. what width was the cable trunking you used to fit the hoppvals into? many thanks and best regards, Kenny.

Hi - thanks for the comment and checking out the video 👍 they stay in place no problem… only thing I noticed that there is a spring inside the blind at the top that does rattle a little bit against the metal body of the blind so on the one on the sliding door side I put some foam tape in there so no rattles 👍 so if you go for this solution I’d do that before fitting too 😄

Hey Scott 👍 thanks for the comment and feedback on the videos mate, glad you finding them useful 😃 The windows was one thing I didn’t do myself… There was a local conversion company close to me that did the supply and fit for these but they closed down over lockdown 👎 although it am pretty sure they came from Kiravans www.kiravans.co.uk/products/left-opening-window-for-ford-transit-custom-2013?variant=30380999278645&currency=GBP&+shopping&gclid=Cj0KCQiAuvOPBhDXARIsAKzLQ8EtO-2cjd0gvdanRcrneZ9o0Hjs2KdCblWTF4j5sWxDcEZBXlyzpsoaAnMOEALw_wcB

@@TransitCustomCamper ah, I see. Thank you for the link, I will have a look there then. Thanks pal 👊🏼

@@scottwinnel3983 no worries 👍 good luck with the conversion 👍

Ah thanks mate 👍 Sounds like a good Xmas holiday project! I can’t recall the exact size I think it was about 1 inch or maybe a bit over? I think I eye balled it when I was in B&Q 😃 Thanks again and have a great x-mas season 🎄

@@TransitCustomCamper ok thanks bud im making the trip to b&q and ikea today to get all the parts i will let you know how i get on

@@TransitCustomCamper also what mm ply did you use ?

I think it was 3mm…?

I don’t know if they would classify as 100% blackout but they do do a very good job!.. IKEA describe it as a “darkening” blind so maybe not full black out 👍

Ah thanks 👍 yeah the blind does go all the way up behind but could have maybe cut the hole a bit bigger also.. thanks for the feedback, comment and checking out the videos too 😀

Hi thanks for the comment and checking out the video 👍 the metal blind housing at the top is just over 4cm

Hi thanks for the comment and checking out the video 👍 the metal blind housing at the top is just over 4cm

Hey 👋 I just used the Velcro tape and it’s been fine no issues and still in place so I didn’t need anything else… Also it’s pretty snug when fitted into the window aperture too so I think that helped a little too 👍 Hope you can get it sorted… Also one thing also I would try and put some foam tape inside where the metal spring is in the top casing as it rattles a bit! 👍

@@TransitCustomCamper ah ok brilliant i will go with the velcro iv found a roll and just fitted to the prototype and your right it does seem very secure very happy how it looks , iv just got to wait for some suede now and build a good one , cheers for the tip with the spring ! is that hitting the housing ?

@@roostaraver ah nice one 👍 yeah it’s hitting the housing… I didn’t do mine but someone commented after it was fitted… you could try and put 4 way stretch Capet in but I think foam tape should be winner!

I think this was 90? From memory.. I think on the IKEA site you can see all the size options 👍

Ah great yeah! These are well worth a go compared to the cost of the pods! No I didn’t use a template - I just measured up and then had a few test fits before I got the final fit 👍

@@TransitCustomCamper fair play to you looks factory. What size ply did you use

We only have this one blind at the moment so there is other windows where the light gets in our van - however these are the black out options and they do keep the light in very well too 👍

@@TransitCustomCamper Thank you for your response.

Hi - thanks for checking out the video 👍 I haven’t got around to the sliding door one yet 🥲 I was planning to use the same style blind as before but I think the smaller version

@@TransitCustomCamper no worries and I need a 90 cm blind which they dont seem to do its 80cm or 100cm wonder if there's something, way of cutting these down

Ah OK - I think they can be cut down but not sure how to be honest - sorry - hope you can get it sorted ✅

@@TransitCustomCamper I'll let you know by the end of the week when I've done them

Did you do the side loading door? If so what size blind did you get away with. Thank you

It’s about 1 inch 👍

Hey Alan - these are 155cm - I am not sure the come in different depths but there are different widths available - Link on IKEA site is here www.ikea.com/gb/en/p/hoppvals-room-darkening-cellular-blind-grey-10386431/

Ah thank you 😊- ah sorry if it was too much talking from me 😀 I did do a quicker 10 step version without me on it too if that’s any use 👍 kzfaq.info/get/bejne/b8x8jd2rv5zOnJ8.html