Part 3: 1985 Ford Bronco Upgrades and Testing Off Road

No video

Part 3: 1985 Ford Bronco Upgrades and Testing Off Road

Рет қаралды 38,920

Күн бұрын

Today I take the 1985 Ford Bronco and Cassie takes the Land Rover Discovery II to the off road park, but first I have some changes I have to make to the Bronco. If you haven't seen the first video on this truck check it out here: • 1985 Ford Bronco Would...
Don't forget to visit my website for more updates: www.thisweekwit...
This Week With Cars - Episode 0138
#FordBronco #OffRoad #Bronco

Пікірлер: 106

@matthewmilam4760 3 жыл бұрын

Nice work on that Bronco! Can’t wait to see what you do to it after this.

@colerippeon3903 3 жыл бұрын

Awesome. Keep up the bronco videos! If those sunvisors annoy you, a simple fix is to get some neodymium magnets with a recessed hole in the center. Run a screw through the magnet and sunvisor on the end of the visor and put a speed nut on the end of the screw. This will hold the visor up on the roof and keep them flopping about.

@mayflyamp 3 жыл бұрын

Hey, don't be so hard on Cassie! She's out there doing it.

@keithjefferies9862 3 жыл бұрын

Amen

@jonathanz4987 3 жыл бұрын

Please keep the Bronco videos coming! It's a nice change seeing you work on something I've worked on myself.

@member799 3 жыл бұрын

Learned 2 things today. Apparently I've being spelling the work Chief wrong my whole life and second that Jeep Owners are disproportionately over confident.

@ericwalstrand3512 Ай бұрын

That's like the "No Regerts" tattoo.

@rayfunk5659 3 жыл бұрын

Suggestion on that alternator, consider what has come to be called the 3G replacement. 85 came with a 2G alternator and there are some serious problems in the connector which can lead to failures and even worse, fire.

@lawrenceengel3330 3 жыл бұрын

Nothing beats a good day out playing in the mud 👌

@acebull7408 3 жыл бұрын

You know the Discovery 1 and 2 are really good offroad.

@MarcB5807 5 ай бұрын

I've got an "84 Bronco, 351W all good metal. Work in process. The body paint is rhino liner top to bottom. Not sure if I'm going to add headers, only because of heat issues.( I lve in the Phoenix area). I do like your choice of mudd tire. Good road tire for me, with the sand and then switch to a rock tire for the northern trips. Thanks for the videos

@davidjohns.3065 3 жыл бұрын

I think Cassie had the best vehicle.

@filmart430 8 ай бұрын

Love the look of those bullnose broncos.

@Tarkov. 3 жыл бұрын

Ha, she broke the same light you just fixed.

@notrut 3 жыл бұрын

A typical female ability ...

@jonathanz4987 3 жыл бұрын

Just put back the old one.

@wyattblackwood3927 3 жыл бұрын

A REAL Bronco. Like the old saying goes, they don't make them like that anymore. Love it, sounds great !

@andrewYashua7490 7 ай бұрын

These and the 75-77 k5 blazers are still bad ass. I wish they would make the new Broncos like these oldskool joints.

@robertmorin1454 3 жыл бұрын

Yes more bronco fix ups please a! Looked like some fun in the mud!,👍🇨🇦

@keithjefferies9862 3 жыл бұрын

the blinker shop going love you

@cassiemoses6591 3 жыл бұрын

💖😅

@paulb4uk 3 жыл бұрын

loving the bronco great looking truck seemed to handle everything fairly, effortlessly i cannot wait to see more of it in action .

@sexysammij1 3 жыл бұрын

Loving these builds, keep the progress and fun coming love it and love seeing your wife involved having fun too.

@jsmit8686 3 жыл бұрын

Great video. Would be nice to have a camera with Cassie as well. She is doing great.

@zezosafady1373 3 жыл бұрын

Yes more bronco

@inverted311 3 жыл бұрын

Had an 85 Bronco myself years ago... Gosh do I miss it.

@dakotabeardall7139 3 жыл бұрын

More Bronco videos! Ive owned a number of different Broncos but never my favorite body style (the bullnose) but i was finally able to pick one up and havent had a minute to start wrenching on it so these videos are cool to watch. I also like that you saved a pretty decent bullnose from the crusher! Good job guys

@wayne93094 11 ай бұрын

Nice, I found a nineteen eighty fi've just trying to figure out if it's worth picking it up.

@micheltebraake7915 3 жыл бұрын

Do not renew a flashing light unit just before an off-road day. Yes, more Bronco, this is a fun project car.

@maxsvarga9235 2 жыл бұрын

Hello. I am from Russia from the city of Vladivostok. I looked at your review with pleasure. I really like Bronco. Real American power 💪🏻 We sell mainly Land Cruisers .I really want to buy a Bronco 78-79. What is the price of such a car you have ?

@mattharte7334 3 жыл бұрын

Great video I was surprised the Jeeps didn’t do better on the outdoor course, I think LR Defenders would have made easier work of it.

@vinyl_soul9292 3 жыл бұрын

The Bronco project is great.

@kevat310 3 жыл бұрын

Great vid!! Sorry, but I had to laugh at the broken light..... leave the R/H as is and maybe find a broken L/H and install it... preventative maintenance. LOL!! Keep up the good work!

@WillemHuber 3 жыл бұрын

Not sure if you’re ever gonna paint this rig, but go down to your local home depot and grab a few cans of Rustoleum Gloss Black Turbo Cans. It’ll give the rig a nice shine and you’ll be done in 15 minutes. Just mask what you wanna mask, sand what you wanna sand, then paint. It’s affordable and would be perfect for this bronco

@simonbelmont65 Жыл бұрын

I wish they would bring these old bronco’s back. The new ones don’t look nearly as good.

@snivesz32 6 ай бұрын

9:28 Did he really misspell “master chief?” lol

@nakedgoblin4090 3 жыл бұрын

Great work brother keep it up I wish they had places like that in New York City you should bed line the whole rig

@madpainter69 Жыл бұрын

HI! i have a 1985 bronco. I feel your pain on the wiring. i gave mine a trim when i ditched the Old ford Hei and installed a gm style one wire distributer, i ditched a p09nd of messed up unnecessary wiring and a control box and i gained a hotter , easier starting unit... I recommend the upgrade. Reply

@SL1CK1307 Жыл бұрын

Waiting on all ur bronco videos

@ThisWeekWithCars Жыл бұрын

Filming one right now.

@scottwelch2044 Жыл бұрын

I know it has been a while but watching these I have not seen what if any lift you have to fit 37" tires?

@aaronbrandes7456 3 жыл бұрын

Very Cool.

@regsparkes6507 3 жыл бұрын

Good fun video and knowing your limits is smart too!

@AndrewHCann 3 жыл бұрын

Excellent video and looking forward more videos too also

@user-kn1dp7ws4l 5 ай бұрын

Does anyone know what happened to this bronco?? I love bullnose broncos and was hoping to see this thing get a full resto. Especially since it’s a junkyard rescue

@roum22 3 жыл бұрын

I'm surprised the rocker pivots are easily machinable and not hardened.

@rayfunk5659 3 жыл бұрын

Yes, same here. Unique solution, not sure why the hydraulic lifters would not take up the slack, but if you have success, carry on!

@randomgc 3 жыл бұрын

Great work on the Bronco! So glad to see it coming back to life, and am looking forward to more. Were the Jeeps having Locker problems? I would have sworn they were open differentials, or limited slip, at best, in a few of those clips.

@ThisWeekWithCars 3 жыл бұрын

One of the Jeeps was having locker problems.

@harrywalker5836 2 жыл бұрын

@@ThisWeekWithCars seeing your in u.s. next vid, should be,,bin the ttb, fit d44 with lunchbox. exactly what ive done here in aus.. 8 stud, & d60 rear.

@johnmoruzzi7236 3 жыл бұрын

I’m glad you didn’t get crazy big tires for the Bronco... shame to spoil looks and driveability just to get over slightly bigger rocks...

@shackman9566 3 жыл бұрын

Thank you again.

@charlestheboss1847 Ай бұрын

Well I hope he least balance the front two tires

@mds2465 3 жыл бұрын

Nice job on the bronco, I guess you should’ve taken one of the other Land Rover’s instead on your off-road adventure lol. Looking forward to the next video!

@MrBradjr1234 Жыл бұрын

Btw the first rocker should have oil in it like the rest so maybe that's the problem you're having with value train noise js

@tylermarshman4382 3 жыл бұрын

Funny. The wires in my 86 bronco look just like that and no idea what the go to. The other funny thing I saw in one of your videos the cracks on your dash are in the same spot as mine and I have no rear window.

@TheHord 2 жыл бұрын

Enjoyed the video, would like to see more on this Bronco, looks like it has been over a year since any updates?

@CMKshadow 3 жыл бұрын

Great! Thanks!

@highstargazer Ай бұрын

im buying a 86 bronco 2 with a 4 inch lift on 35’s😁😁😁

@2H80vids 3 жыл бұрын

These Jeeps should come with a factory-fitted towrope on the front.😁

@vicmabus1532 3 жыл бұрын

Seems like only the Jeeps got stuck.

@tomsilven 3 жыл бұрын

Yess!!

@Oyvind88 3 жыл бұрын

Great video😀

@awesomeguy8392 3 жыл бұрын

Absolutely LOVE the truck Steve! I take it that was the charging light on the dash?

@ThisWeekWithCars 3 жыл бұрын

No that was the 4x4 light.

@absenteeatom 3 жыл бұрын

Almost 50k Steve 👍

@ThisWeekWithCars 3 жыл бұрын

So close!

@windronner1 3 жыл бұрын

Would have preferred to see you set up drill press for machining instead mounting tires.

@Gerinse 3 жыл бұрын

Kitty Litter can be great for creating traction when you get bogged down.

@absenteeatom 3 жыл бұрын

Regular or used?

@Gerinse 3 жыл бұрын

@@absenteeatom whatever floats ya boat, mate. Think the turds might hurt the traction though :P

@Swoldemort500 3 жыл бұрын

Part 4 on the Bronco can't come out fast enough.

@jamesdearman814 3 жыл бұрын

fun stuff if you like that kind of thing - i'd rather watch than drive -

@jakealter5504 2 жыл бұрын

My dad has a bronco around the same age as yours

@joshcummings6642 3 жыл бұрын

Was hoping you'd take the bronco through that hole and show jeepers whats up.

@ThisWeekWithCars 3 жыл бұрын

Need lockers first.

@neilmurphy845 3 жыл бұрын

@@ThisWeekWithCars can you get them or was it never an option

@ianatkinson8464 3 жыл бұрын

Do it all!😉

@jayyin88 3 жыл бұрын

more video off the bronco

@lanceneuman9528 3 жыл бұрын

He spelled it right on one side though.

@MegaDirtyberty 3 жыл бұрын

Why was she always turning the wheels to the right?.

@StanleyKubick1 3 жыл бұрын

what I'm seeing is a lot of wheelspin and bunch of people who have no idea how to drive off road. Bronco looks great on the new tires though, would love to see more content with it.

@ThisWeekWithCars 3 жыл бұрын

That’s a Jeep thing they are all about wheel spin. Land Rover Motto: Slow as possible, fast as necessary.

@danielpothier9990 3 жыл бұрын

more bronco please

@harddriveusame7248 3 жыл бұрын

Just curious, what is the weight difference between Jeep/Bronco/Discovery?

@ThisWeekWithCars 3 жыл бұрын

Lightest to heaviest Wrangler, Discovery, Bronco with the Bronco being 1000 lbs or more heavier than the Wrangler

@mry82 3 жыл бұрын

8:47 “Insanity is doing the same thing over and over and expecting different results.” -Einstein.........Haha. :)

@neilmurphy845 3 жыл бұрын

Shouldn't those tire's grip in the mud

@garymatthys3605 3 жыл бұрын

How much did you take off the rocker stands?

@ThisWeekWithCars 3 жыл бұрын

20 thousandths

@davidcontreras2799 2 жыл бұрын

Do 35’s fit well on stock suspension?

@ThisWeekWithCars 2 жыл бұрын

The front wheel wells were tubbed on this truck already, that is where you might have your issues so I cannot say what it would be like on a unmodified truck.

@davidcontreras2799 2 жыл бұрын

@@ThisWeekWithCars oh ok thanks 🙏🏽

@toddchambers3820 3 жыл бұрын

For Ford V8's of this ilk you were supposed to by either 0.040" longer or shorter pushrods to accomodate for dimensional changes in the motor.

@ThisWeekWithCars 3 жыл бұрын

That would not take the slop out of the pivots and rockets. I was not adjusting valve gap.

@toddchambers3820 3 жыл бұрын

@@ThisWeekWithCars This was one of Ford's "Better Ideas" back in the mid 70's and early 80's to deal with valve train and rocker noise. If memory serves me look at Motor Manual 1974-7 pg.1155. I agree there are other ways to "skin this cat" and yours is a novel idea and costs a heck of a lot less than a set of pushrods (about $85 from the dealer back in 1995). At the time, it fixed the valve train noise, for a student of mine, in a 1975 F150 with the 351W engine. By the way this was the fix for all ford V8's from that era.