Awesome! Getting to work with pops is always a hoot. The ol stories and whatnot. Be safe.
@PastoralHomesteadOutdoors4 жыл бұрын
More and more I cherish our time together much more than the physical activity that we are doing. He is a great man and I am privileged to have him around!
@lastaccountbannedfortalkin14493 жыл бұрын
See the oscillator tool you used to cut the outer part off (usually referred to as a multimaster or multitool) you can get longer scraper blades for them for wood and even for silicon believe it or not. Fein have an extensive range of blades that you could have scraped that rotten wood out flush. I've just bought a Mayland boat and already my Fein mutimaster has done about 80% of the work on its own.
@PastoralHomesteadOutdoors2 жыл бұрын
Great tip! I'll get one of those
@chrisreynolds71294 жыл бұрын
Good to see you back on here. I still haven't started on mine. Now that I am stuck at home it may be a good opportunity to start on it. Looks good so far. Keeps the videos coming. God bless!
@PastoralHomesteadOutdoors4 жыл бұрын
Hey Chris! I was just looking over our old messages and wondered about your old boat! I hope you and your family are well and you get to catch some fish this spring!
@lukedawg357SIG4 жыл бұрын
My 88 skeeter is rotten i never seen it done from the back like y'all are doing most ive seen cut the top off thanks for sharing.
@PastoralHomesteadOutdoors4 жыл бұрын
You bet, let me know if I can clarify anything for you.Not a professional, but I'll help if I can!
@jsetser001 Жыл бұрын
I'm about to tackle replacing mine. 2 minutes in and I feel better about doing it.
@PastoralHomesteadOutdoors Жыл бұрын
I'd love to hear about your progress, I hope it goes well!
@Thepaintballinfool4 жыл бұрын
Not sure how I missed this ! Will be watching part 2 right after this ! God to see y’all redoing this gem! Also the saw is known as a multi tool, multi saw, or oscillating saw.
@jerryoxendine7642 Жыл бұрын
Wrong way to do it
@naniamo13 жыл бұрын
Cool video I'm doing this type of project and I thank you for putting it on there.
@PastoralHomesteadOutdoors3 жыл бұрын
No problem 👍 Let me know if I can help in an way!
@galada524 жыл бұрын
Glad to see you back. Looking forward to seeing the finished product.
@PastoralHomesteadOutdoors4 жыл бұрын
Thank you so much!
@williamriley25284 жыл бұрын
Looking forward to Transom Restoration Parts 2 & 3...!
@PastoralHomesteadOutdoors4 жыл бұрын
I'm excited about it. I would appreciate your input and insight as we go forward. Please let me know if there is anything that I miss or need to do differently!
@spike27942 жыл бұрын
Excellent!!! Have a 89 cobra bass boat with a rotted transom. Looking at the price of boats today......thought maybe I can fix it.
@PastoralHomesteadOutdoors2 жыл бұрын
You definitely can! The best lesson out of the rebuild was that it is possible even for a couple of dudes that don't really know what they're doing. Just some research and some time and you'll be good to go! Good luck! By the way, I love those old Cobra boats! For sure worth saving!
@williamriley25284 жыл бұрын
U.S. boat manufacturers have completely eliminated wood from their products... I believe Triton Boats was the first U.S. boat manufacturer, in the early 2000's, to completely eliminate any/all wood from their boats. The other U.S. boat manufacturers have eventually followed Triton's lead...
@gerardguglielmo16443 жыл бұрын
Not sure about others but Skeeter first composite hull was 1997 at least for the Bass boat. Would love to have a list of the composite hulls and when they started. Sadly while the hull is composite some of the rod lockers and storage still use wood. Hopefully that changed in time.
@javierferrer46343 жыл бұрын
Nice! Thank you for sharing.
@PastoralHomesteadOutdoors2 жыл бұрын
Thanks for watching!
@jondavenport7896 Жыл бұрын
Just came here from blackberry channel trying to figure out replacing transom on my 1987 gemini bass boat
@PastoralHomesteadOutdoors Жыл бұрын
Did you already tackle your transom? How did it go?
@jondavenport7896 Жыл бұрын
@@PastoralHomesteadOutdoors once I started opening it up it needed all new stringers and everything so I sold the motor for about 3k and the person took the boat and trailer as a mode of transportation. I still have a 1975 16' aluminum starcraft that I use regularly.
@PastoralHomesteadOutdoors Жыл бұрын
@@jondavenport7896 Sounds like you avoided a headache. Glad you got the motor sold!
@marcgroeblacher66622 жыл бұрын
The tool you’re referring to is called a oscillating saw or a Fien saw.
@blackberryridge82054 жыл бұрын
Ohh man!! I just found your channel! I just bought an 85 Stratos last week. I have to do this same thing. Can’t wait to see you drop the other videos to this. Subscribing now!!
@PastoralHomesteadOutdoors4 жыл бұрын
Blackberry Ridge coming this week my friend. Easter week is busy! Let me know if I can help in anyway or answer any questions.
@blackberryridge82054 жыл бұрын
Pastoral Homestead Outdoors I hear ya!! Looking forward to it. When I put some videos up of working on mine I will give ya a shoutout and link your videos and channel!
@PastoralHomesteadOutdoors4 жыл бұрын
Blackberry Ridge that’s great man, I really do appreciate it. I’ll look out for your videos!
@JuanSepulveda-d7s18 күн бұрын
I just saw this myself
@josephkitchens48313 жыл бұрын
They use those tripods to lower people into man holes. Seems to work well for outboards.
@PastoralHomesteadOutdoors3 жыл бұрын
Joseph Kitchens I’ve used that thing for countless applications. We even strung a deer up with it this fall. I would highly recommend it!! I didn’t know about the manhole...that’s interesting
@sandys97913 жыл бұрын
That is exactly what it is for.
@psychodad46346 ай бұрын
I think I have the same problem with my Procraft 750, except the transom is hollow on mine.
@bcroft68bc4 жыл бұрын
That little tool is called a “oscillating saw”. They’re very handy.
@newwavepressure6478 Жыл бұрын
Lookin to get my first boat kinda want a smaller 20foot bay boat to learn and I get the guts to go out in open water lol
@beardedtrucker94864 жыл бұрын
Did you think about sea cast. That’s what I am going to do with my nitro at end of this season. Going replace all wood with sea cast ..
@PastoralHomesteadOutdoors4 жыл бұрын
BeardedTrucker we did consider sea cast. I think the coosa board will work better for this boat. Sea cast looks to be a great product
@tonyhagey86963 жыл бұрын
Do you absolutely need to cut the Trans fiber glass mine isn't cracked it was just bending out I got all the wood out can I just glue everything back together with new wood ?
@PastoralHomesteadOutdoors3 жыл бұрын
I’m so sorry I missed your comment! It is not necessary to cut out all the fiberglass if you’re going to seacast it. I would think it would be too difficult to build back the layers the way we did without removing the outer glass sheet.
@santiagoaltunaga72542 жыл бұрын
Hi, I have one just like it, but I don't know where to get it. I don't even know the names of the products you used. If you would be so kind as to give me a list of all the products used, thanks.
@PastoralHomesteadOutdoors2 жыл бұрын
I don't have a full list, I know we mention everything in the videos. In the future rebuilds, I'll do better at putting those lists and costs together.
@kelliwalter57383 жыл бұрын
My dad is restoring a 79 skeeter transom and was looking for the list of products you used to replace yours. Can you send me that or a link to all of it? Please and Thank you!
@PastoralHomesteadOutdoors2 жыл бұрын
It's been a while since I put that list together, if you will send me an email I'll try to track everything down!
@WayneTheBoatGuy4 жыл бұрын
I may be having to do this to my boat :-( Interested to see whether the coosa board is a "better" option
@PastoralHomesteadOutdoors4 жыл бұрын
I am going to be doing another rebuild soon, and I for sure will be using coosa board. It's a little expensive, but it's easy to work with and it retains no water...hands down the best stuff that I've seen out there.
@mrpaly103 жыл бұрын
Hi my question on the coosa board is that how do i measure the size of it and the thickness depending the size cut of the transom?
@arowanarene443 жыл бұрын
Nicely done! I enjoyed watching you and your dad getting it done.What size coosa board did you go with? Looking to do the same job on my 85 Astroglass.
@PastoralHomesteadOutdoors3 жыл бұрын
I believe this was 3/4in board. We ordered it cut in half because the shipping was a lot cheaper!
@davidconroy56833 жыл бұрын
Complete transome rebuild part 4
@lonniesimmonds22944 жыл бұрын
What ever happened to the boat from hell. Still wondering if you ever started doing any work to it?
@PastoralHomesteadOutdoors4 жыл бұрын
Haha, I mentioned it at the end of this video! I am bringing it back from New Mexico this weekend and we're going to tear into it!
@lonniesimmonds22944 жыл бұрын
Did you get it back to start working on it
@nicku1012 жыл бұрын
Where did you buy the coosa board from?
@PastoralHomesteadOutdoors2 жыл бұрын
We searched online for the cheapest cost with shipping. Not sure where it was from.
@abigailcavazos16304 жыл бұрын
will there be a video of the boat in the water after the Transom build?
@PastoralHomesteadOutdoors4 жыл бұрын
That is something I didn't think about! We've had it in the water several times after the replacement, but I didn't think about making a video, I'll get to work on that!
@abigailcavazos16304 жыл бұрын
@@PastoralHomesteadOutdoors The makeover looks great. Looks like a lot of doubters need to see this beauty in action! Thanks for the tips my skeeter is getting transom redone as we speak!
@abigailcavazos16304 жыл бұрын
I will be doing my transom myself.. would love to show you my project and direct me in some pointers if you could.
@PastoralHomesteadOutdoors4 жыл бұрын
Abigail Cavazos Feel free to shoot me an email with your progress and pictures! I would love to help you in anyway that I can
@kevinvanramshorst69853 жыл бұрын
This is a fibreglass boat ?
@PastoralHomesteadOutdoors3 жыл бұрын
Yes.
@bassneckfishing25054 жыл бұрын
How much is cooas board I'm trying to restore my challenger bass boat
@PastoralHomesteadOutdoors4 жыл бұрын
Talbert Roberts it’s really good stuff and easy to work with, it’s about $200 for the amount we needed.
So you went over top of that plywood? Wasn’t it rotten?
@PastoralHomesteadOutdoors Жыл бұрын
No sir, all the plywood was removed. Replaced with coosa board. All of that is addressed in the subsequent videos.
@mikelovesspeed1315 Жыл бұрын
@@PastoralHomesteadOutdoors ok so that last layer you didn’t take out was down to the fiberglass of the boat?
@mikelovesspeed1315 Жыл бұрын
@@PastoralHomesteadOutdoors working on a transom on a 1990 stratos trying to decide when to stop tearing out
@PastoralHomesteadOutdoors Жыл бұрын
@@mikelovesspeed1315 that’s correct. The back part that was left was the interior fiberglass hull. There was some residual stuff left on which makes it look weird, but we took it all out down to bare glass.
@PastoralHomesteadOutdoors Жыл бұрын
@@mikelovesspeed1315 I’d take every bit of wood and resin out of there and rebuild it with new.
@tignocam68454 жыл бұрын
I have to ask. In the description it says you’re in the Panhandle? I’m near Amarillo!
@PastoralHomesteadOutdoors4 жыл бұрын
Tator-Tot I am over by Meredith!
@tignocam68454 жыл бұрын
@@PastoralHomesteadOutdoors You are kidding me?! I'm from Stinnett hahaha
@PastoralHomesteadOutdoors4 жыл бұрын
@@tignocam6845 Let's go fish!!
@lapd19894 жыл бұрын
Are you base in Miami?
@PastoralHomesteadOutdoors4 жыл бұрын
lapd1989 No sir, I’m close to Lake Meredith.
@DawgPrepper4 жыл бұрын
Who in the devil's hell told you to cut the back end of a boat out you're supposed to pull the top and then go down in there and take the transom out, You just took all the strength out of the transom...
@PastoralHomesteadOutdoors4 жыл бұрын
That option was not possible due to the top cap overlapping the transom, which is addressed somewhere in the video series. There is no sacrifice of strength or rigidity when cutting out the back end and re-fiberglassing it back in. If you would, just take a peak at the rest of the videos and see the final result. This is the same process that many mechanics and boat manufactures go through when they replace transoms. I appreciate your comment and concern.
@DawgPrepper4 жыл бұрын
@@PastoralHomesteadOutdoors Ok... This is what I do for a living for about 40 years now... And you have to remove the top..That is what the rub rail covers... But I will watch the rest to see what you did later to strengthen the Transom... I cringed when I saw you destroy a classic boat.... Professionals cut the top rail if the top can't be removed and use a drill bit to take out the wood... We would never cut the rear end out of boat...
@PastoralHomesteadOutdoors4 жыл бұрын
I understand what your saying and we definitely considered doing that. However, after checking with a variety of sources, this is the process we chose to follow. There are countless youtube videos that use this method as well as a Ranger technician I spoke to that performs this same procedure on newer Ranger boats that are fixed under warranty, although they cut it our from the inside. We didn't destroy this old boat, as a matter of fact, I've spent several thousand dollars keeping it on the water. Just because someone chooses to do something differently than you would perhaps do it, doesn't mean that it is necessarily incorrect, it's just different. As for putting it back together, we simply built the coosa board out with fiberglass until it was flush, re-epoxy the cut away pieces, beveled the seams and fiberglassed until it was flush and then sanded and gelcoated over that. I assume its stronger now than when it rolled of the factory floor.
@BBD404 жыл бұрын
You talked for 4 minutes without a boat in the video...
@PastoralHomesteadOutdoors4 жыл бұрын
BBD40 that’s true. I also completed the project with 7 videos in total. You can always skip through the parts you don’t like!
@Travizzlee4 жыл бұрын
Dude. Talking to much
@PastoralHomesteadOutdoors4 жыл бұрын
I know...I hope folks can fast forward past that and get to the rest of the video series. My apologies!