Patina In a Can! - Old Truck Paint

No video

Patina In a Can! - Old Truck Paint

Рет қаралды 67,990

C10 Truck Nerd

Күн бұрын

Пікірлер: 87

@dorriersgarage9293 2 жыл бұрын

Hey, thanks for the shout out! I love the 67 - 68 Chevy Trucks, I have restored three of them so far. When I get ready to do another one it will be 503 green. Rocky Dorrier

@C10TruckNerd 2 жыл бұрын

You bet and thanks for helping me out earlier! I am glad you caught the video! I am going that route too. Just a cool old color! I gave you a sub. Thanks again!

@HBelectrician 2 жыл бұрын

A tip to add to this great video-on the final paint coat like on the green before you spray go ahead and lightly spray a little water on the surface in a few spots and paint the green on top that gives added patina look-

@C10TruckNerd 2 жыл бұрын

That’s a cool tip! I will try that next time. Thanks for sharing!

@milner1 2 жыл бұрын

My neighbors here the theme song from Sanford and Son when I come down the road with a trailer lol

@C10TruckNerd 2 жыл бұрын

Outstanding! That made me laugh out loud. Such a good tune!

@slvrktman7824 6 ай бұрын

Good job! Put the box on the truck…would like to see the whole package.

@C10TruckNerd 6 ай бұрын

I should have! I ended up selling it to a kid that needed a good 67 503 bed.

@horsedrag2468 2 жыл бұрын

They were only new once. I'm doing 4 K20s two have great patina, one Seafoam the other was a Connecticut DPW orange that pushed snow for 50 years. In all the restoration work getting the faded, chalk-like patina right is most challenging. I sometimes get lucky and find some little piece that matches but the welding and plastic work must be doctored or left raw. Your video is done well.

@C10TruckNerd 2 жыл бұрын

Thank you Frank! I love hearing you have 4 going. Each one we save will bring years of memories for someone else. Matching patina is an art I haven’t mastered, but it is fun to try! Thanks for sharing and for watching!

@billautomaton5998 Жыл бұрын

Yeah couldn't agree more. I used to spend so much time getting my vehicles shiny and nice, then some idiot would always scratch it or something. Patina all the way for me now...

@C10TruckNerd Жыл бұрын

I enjoy having a truck that I don’t have to worry about it raining, driving it down a dirt road, or a bird pooping on it! Good times!

@billautomaton5998 Жыл бұрын

@@C10TruckNerd Could not agree more!!

@vicentedacosta Жыл бұрын

All that work for your bed to look like my old VW Bus T2 is looking right now. :D Really gave me some ideias of how to make it look better. Tks and subscribed

@C10TruckNerd Жыл бұрын

Thank you very much! I didn’t like the patina look back in the day, but I really like them now. I think it adds a lot of character to what Mother Nature can do to a vehicle. Best of luck and thanks for watching!

@777Bviews Жыл бұрын

This turned out awesome!

@C10TruckNerd Жыл бұрын

I appreciate it! I have some more experimenting to try out soon!

@DustyMacsGarage 2 жыл бұрын

Im building a 78 C10 Patina Shop Truck on my channel. I enjoyed your take on re-patina'ing it. Turned out nice!

@C10TruckNerd 2 жыл бұрын

Thanks! You got a pretty cool shop truck there too!

@williamround-tree4096 Ай бұрын

Thank God for fast forward !!!

@C10TruckNerd Ай бұрын

Ouch!

@joehanika Жыл бұрын

That is some great work!

@C10TruckNerd Жыл бұрын

Thank you! I won’t lie, that was a lot of fun. I figured I could make it any worse.

@SuperAirsoft19 2 жыл бұрын

Lol that’s actually pretty good. I’m still trying to look for one here in Florida but I haven’t had any luck as of yet.

@C10TruckNerd 2 жыл бұрын

Thanks! I won’t lie. That was the 1st time I ever tried that! Figured how bad could I screw it up! Trying to find good ones around here is getting harder. The rust is getting pretty bad on them now. Thank you for watching!

@Rattyman577 10 ай бұрын

Great job and highly entertaining video 🙂👍

@C10TruckNerd 10 ай бұрын

I appreciate it! I’m a goof ball.

@somewhatfast 2 жыл бұрын

Im working on a patina video on a 1955 Plymouth Wagon. Great video, subscribed.

@C10TruckNerd 2 жыл бұрын

I appreciate it! Email me some before and after pics or post them on my facebook. facebook.com/profile.php?id=100084424137370

@jasonanderson6714 8 ай бұрын

Great videp thanks for sharing it.

@C10TruckNerd 8 ай бұрын

You bet! Thanks for watching!

@jasonanderson6714 8 ай бұрын

@@C10TruckNerd your welcome

@SOLDOZER Жыл бұрын

Mix a jug of saltwater and vinegar, soak some rags and put them on the rusty bits. It will be really rusty again the next day and not look like sanded down rust.

@C10TruckNerd Жыл бұрын

I like it! I’ll give that a try on the GMC. Thanks for sharing!

@jamiekilbury7346 Ай бұрын

I like that idea,then what just use those soaked rags and wipe the whole truck down with them?

@WhiskeyDents 4 ай бұрын

I really enjoyed your video.

@C10TruckNerd 4 ай бұрын

Thank you! I’m getting much better at it now. I’ll have a follow up in the future.

@WhiskeyDents 4 ай бұрын

@@C10TruckNerd I’ll give you guys a shout out on one of this weeks episode.

@kennethlocke4213 3 ай бұрын

U did really good. How about white highlights? Bondo spots?

@C10TruckNerd 3 ай бұрын

Thank you! I've been experimenting with new methods. I hope to make another video soon.

@kennethlocke4213 3 ай бұрын

@@C10TruckNerd I've also seen dents in a bumper brazed in spectacular look. Patena/some chrome/gold color if the brass melted into the debt divets. Torch and brass rod brazing us actually a real old metal working method on cars so it actually "looks" authentic. So is lead,but the fumes are toxic. Babit is a safe substitute for lead Experimenting with these? Will take you in awesome new directions

@Stewartmotorsgarage 10 ай бұрын

Wow beautiful video

@C10TruckNerd 10 ай бұрын

I appreciate it! Thanks for watching!

@christianarmoryworks 8 ай бұрын

Great video ❤

@C10TruckNerd 8 ай бұрын

I appreciate the support!

@mikevitali6799 8 ай бұрын

Nice on bro. 🤟🏼

@C10TruckNerd 8 ай бұрын

I appreciate it!

@phillipvansickle4220 2 жыл бұрын

Leaning towards going this route with my '68. Had to replace the cab corners and rockers though... I guess I could just do the filler work on those and attempt to blend in some paint.

@C10TruckNerd 2 жыл бұрын

I won’t lie. It was pretty satisfying to experiment. I was really impressed with the U-POL spray paint O’Reilly’s mixed up. Little pricey but it went a long way. I was able to do the bedside, side of cab and 2 complete coats on the dash.

@christianarmoryworks 8 ай бұрын

"Horsepower and Burnouts". 🤘🤘

@C10TruckNerd 8 ай бұрын

How can you go wrong with that combo?

@alldabeanzracing9650 11 ай бұрын

and... subscribed!

@C10TruckNerd 11 ай бұрын

I appreciate the support and thanks for watching!

@user-iu6xs8jp5j 8 ай бұрын

Отлично показанный пример для работы.

@C10TruckNerd 7 ай бұрын

Thank you!

@chloe-uc4bk 10 ай бұрын

So I was wondering ..... How long did you spend getting all that overspray off your truck parked 3" behind you ? How about the gravel chips from that brilliant rock throwing technique of yours ... lmfao ! 🤪👍

@C10TruckNerd 9 ай бұрын

I probably should spend a little more time on prep work... Nah! The best patina rock throwing technique I have found is side arm! Lol

@daljam4794 2 жыл бұрын

Really like this look! Thinking of trying it myself but was wondering does it not need a coat of primer before you painted it? For the paint to stick to?

@C10TruckNerd 2 жыл бұрын

For longevity primer would be helpful. If you like how rust looks now you might skip it. But you will have to touch it up more frequently unless you put a clear over it. There are some neat companies that make wipe on clear coats. I plan to try one out in the future.

@juncrips 9 ай бұрын

Hello Chad! Awesome video. Would you be interested in participating in a 15 minute interview asking about your opinion on patina vehicles?

@C10TruckNerd 9 ай бұрын

I appreciate it! Shoot me an email and we can get something worked out. Itsthechad71@gmail

@dondavis2546 2 жыл бұрын

I don't know I've been doing it for almost 40 years and I'm still working on it being retired now

@C10TruckNerd 2 жыл бұрын

I bet! I have never been a good body guy. This was actually pretty satisfying and fun. I am really leaning towards the patina look for my next build. Thank you for watching!

@loganboyer8816 Жыл бұрын

Chad! I know you were outside, but mask up brother. That upon paint is not good to breathe in!

@C10TruckNerd Жыл бұрын

Good tip! I might get more views if I cover my face too!

@chloe-uc4bk 10 ай бұрын

Don't worry . The truck 3" behind him caught most of it .. lmfao !!! Good job Chad 😷🤭

@rossernst6860 2 жыл бұрын

Great job! What color of brown is that?

@C10TruckNerd 2 жыл бұрын

Thank you! It’s called rusty metal primer by rust oleum. Home Depot stocks it around here.

@georgieats 11 ай бұрын

you remind me of Mr Rogers

@C10TruckNerd 11 ай бұрын

My sweet sweater?

@georgieats 11 ай бұрын

@@C10TruckNerd The words the way you were explaining things

@C10TruckNerd 11 ай бұрын

@@georgieats Thanks neighbor! Haha. I guess you can tell what I grew up watching and what I have the girls watching now!

@waldoamaya2612 Жыл бұрын

YOU-KNOKKT-IT-OUT-DA-PARK......

@C10TruckNerd Жыл бұрын

I appreciate it and thanks for watching!

@pthrelkeld090 11 ай бұрын

Sanded off a beautiful patina huh? I swear... some peoples kids...

@C10TruckNerd 11 ай бұрын

Rust showing through that light green code 503 is my favorite.

@ucantkeepup5234 2 жыл бұрын

Acrylic paint or base?

@C10TruckNerd 2 жыл бұрын

The U Pol brand that O’Reillys mixed was base. They also have clear. I was really impressed with the color match.

@Misguidedchopper 2 жыл бұрын

What can of green is that?

@C10TruckNerd 2 жыл бұрын

This can was bought and mixed at a local O’Reillys. The brand was U-pol. The GM paint color is light green code 503.

@fernhoppertimberworks8037 2 жыл бұрын

Sorry but patina is another word for lazy Ness . I have rattle canned my 67 two times ...once gloss black and the other time krylon cherry red and got compliments both times and I liked it because it was all one color . I loaned my 67 to my brother to cut fire wood and I didn't get it back because he sold it but didn't give me any money for it ....one reason I don't talk to my brother. I would rather have my truck back than the money but that ain't gonna happen . Great video if you want to patina something but that ain't me....rattle can is the only way to go if you can't afford the body shop!!!

@C10TruckNerd 2 жыл бұрын

Sorry to hear that happened! I never was a fan until lately. I let nice paint limit when and where I used to drive because I was worried something might happen to it. Now, I’m more about suspension and drivetrain. I hope you can find you another 67 to make yours again! Thanks for sharing and for watching!

@ArmyK5Guy Жыл бұрын

No body cares and patina paint jobs are dope