He pretty much convinced me to have it done by someone who has done it before . Good video to show what is involved .

I'm glad everything worked when you buttoned it back up. Believe I would have checked before I put everything back together. Of course I'm not as experienced at this as you are.

I have watched a Lot of bar installs and there are a lot of companies that sell bars. It appears bars are made from one central company and folks buy them and put their name one them. Stainless steel or chrome plated steel bars look good.

nice tricks. Looks so much easier your way!

I just finished mine up. Not a bad project, gets a little stressful pulling the wires through. There are longer wires on the Yaffe web site that is at the bottom of the bar order page. (Hard to find) ( highly recommended) the wire pull kit is worthless look at other videos use string and air. I used my stock cables and 6”Guerrilla cable extensions with the 12” Yaffe bars (Cheaper and easier) aux cables extensions available from Harley are cheap like $9 bucks. Didn’t really need. Stock clutch and brake cables were fine with the 12’s . The hardest part for me was getting the fairing back on. Ugh wasn’t starting high enough to clear top bolt holes. I did these on a 2018 street Glide CVO, factory grip heaters were long enough too. I was quoted $500-$600 from my dealer. I’m no hard core mechanic but I was able to do.

Good job 👍🏻 bro ❤️❤️❤️❤️

he did a 3 hour billable job in 30 minutes!!!!

What size heat shrink do you use on the throttle wires and control wires?

Yeah my bike going too the shop I can do it but dont have patience

Would like to know what size heat shrink you used

ยอดเยี่ยม verry good

fairing screws are t27

That’s looks great👍🏻👍🏻 That’s the look I want for my 2018 H-D Limited!! Are those 10 inch ape?

2017 streegluide do I have to reroute clutch and brake cables with 10 inch yaffe bars? Thank you

How much further can the bars be pulled towards the rider

So what size bars are those and did you use the stock brakes and clutch cables? I have a 2021 street glide special and thinking of changing it to 12" bars but can I use my stock brakes and clutch cables? Please let me know thank you

How different is this setup for a 2015 Electra Glide

How are you making sure the bars are in position? As to the bars being more forward(towards the front wheel) or back(towards the gas tank) is that just rider preference?

I’m 100% confident I can replace my bars (my 10 inchers came in yesterday) thanks to this video. I may not be as quick, but I won’t have to pony up $350 for my Harley shop to do it. I have. 2013 street glide. Will my cables all reach or are those extensions absolutely necessary?

Hi Will the after market heated grips fit these??

Can you still see the stock mirrors with those 10" bars?

My wires are to big to fit. I have destroyed them. Any tips on getting them to fit?

My wires that are depinned definitely do not want to go through as easily as yours.

You should list what size these are and a link to where they can be found, would be a smart business decision I think. They look like 12”. I didn’t realize you could use the stock clutch and brake cables with these.

the toughest part is installing the wire extensions, am i wrong, was that part totally omitted?

How much are the 10” bar kit for a 2017 ultra limited

What size bars are those? Thanks

Great video, however, my 2012 sg has total of 18 wires on right side. A lot tuffer to run through as you demonstrated on your bike

I just ordered 12 inch monkey bars for a 19 road king special. Can you tell me if I'll need wire extensions or not?

Overall it was a good video. You skipped how to de-pin and re-pin the connectors though.

So, common.. . Why you don't tell, what size they are??? Sorry, very unsympathetic!!!!!!!!!!!!!!