Paul Yaffe 12 inch Classic Bagger Apes Installation

Рет қаралды 206,130

7 жыл бұрын

Paul Yaffe 12 inch Classic Bagger Apes Installation -
note with the 12" bars we did not have to extend electrical lines But we did have to get a +4" clutch cable and didn't have the how to video for that so here is a channel that we used and gave very clear instructions
Ryan Urlacher
• Remove Harley Clutch C...
here is links to parts we purchaced for this video
black 12" paul yaffe bars - amzn.to/2oDUrsM
chrome 12" paul yaffe bars - amzn.to/2oDNhVr
Clutch cable - www.ebay.com/itm/Barnett-Clutc...
Hope we helped you with this installation sorry if you are more mechanically inclined and didn't need this so thorough we gear ourselves more to the average person to help with everyone's skill levels. Thank You for watching make sure to share this video and subscribe for our future videos!!

Пікірлер: 143

@jaimichaelmusic 5 ай бұрын

Step 1. Cover the gas tank and front fender. Step 2. No need to pull the radio or unplug so many wires. Simply remove two bolts from each side of fairing brackets and rock faring forward to access handlebar bracket cover bolts. Otherwise, great video guys. Thank you so much.

@Running-with-skizers 5 жыл бұрын

Thanks for the tutorial I just ordered 14 inch bars, cables, and wire extensions for my FLHT not as hard as I pictured it and it saves me a grand from having Harley install them

@steveoconnor1527 7 жыл бұрын

You guys are great. Took the anxiety factor way down. Seems like patience is the key to getting this done correctly. Great video.

@2MostlyBaldGuysKC 7 жыл бұрын

Steve OConnor thank you yes it does take patience. But its not bad i think the worse part is just trying not to scratch anything lol thank you for commenting and watching

@erniejones6220 Жыл бұрын

9.nn6y❤b.6b8vrg7uo9b ooo8989z999❤😅dwarf😅😅😅dwarf❤ v 8888,iii8888899o898z999999. Sbb9. Oooghy😮j3 😅I 9see f😮😅

@cammacjunebug2898 2 жыл бұрын

This is the best video out for helping install larger handle bars . Great job guy and thank you

@davechristel5408 4 жыл бұрын

Thanks for the video guys! Exactly what I was looking for to install LA Choppers Twin Peaks on my 2009 FLHTCU.

@Dude7840 2 жыл бұрын

Thanks for the video fellas. Really helped me get my bars installed!

@marksalminen7050 5 жыл бұрын

Pretty much a video of me and my brother-in-law doing something.. Good job!

@infini1970 4 жыл бұрын

Wow great job. I was thinking about doing some of this and my stereo install myself. I think I'll go to a shop lol!

@onOnewheel_jay 3 жыл бұрын

you guys made it very simple for me thank you

@gregoryhousch725 2 жыл бұрын

Really Like The Way Those Bars Look Opposed To The Pointed Curvature Ones.

@dustinmorrison147 4 жыл бұрын

Nicely done!

@tbaine 5 жыл бұрын

I did my 2012 Street Glide and you don't have to remove the radio. When you tilt faring forwards it clears the clamp bolts. Little less work.

@lakotareddeer397 2 жыл бұрын

I was going to say same thing. Why remove radio

@walteralexander7867 7 жыл бұрын

beginning in either '12 or '13 HD gave you more electrical wiring and more brake line so you didn't have to extend them, earlier than that you do have to extend everything.

@2MostlyBaldGuysKC 7 жыл бұрын

Walter Alexander thank you we were un aware of that. it will be nice to have that info for future questions.

@joediffy3788 2 жыл бұрын

I just put 12” bars on my 01 only need the brake line extension

@hddm3 4 жыл бұрын

Really nice. Thanks

@BoringFisherman 3 жыл бұрын

I have an older version of this. Mine is a 1996 and has throttle cables. Do I need extended cables for that if I go to 12" bars? Thanks

@rjwan1000 3 жыл бұрын

Hi guys .. i want to install 12 inch handlebar on FLHTCU 2007 ( without ABS ) . I have to change the clutch cable or throttle cable or brake line ?

@felipescaramella1819 Жыл бұрын

Hello. Did you use any extension on the electronic throttle? (You could activate the international subtitles, we are watching from Brazil. Your video has helped a lot, as it is very expensive to do it at an HD dealership, and not many people have the courage to make this change).

@mcrmao4096 4 жыл бұрын

👍🏻nice thank you🤙🏻

@leftymike8730 5 жыл бұрын

Great job guys. I would recommend replacing all the torx with Allen bolts while they’re off. Or in the very least make sure you have the highest quality torx wrenches, sockets, etc you can afford

@malzziymw Жыл бұрын

Shut up

@hawaiibikekahuna8204 Жыл бұрын

How did you get your finger under the ignition knob? I couldn't get my pinky in there and had to use a screw driver. Also getting the screws out of the radio were a pain but how about getting them back in?

@erictalley3694 Жыл бұрын

I have a 2011 street glide can I use stuck cable and wireless for 14inch ape ?

@JohnYoshii 5 жыл бұрын

Maybe I didn’t catch it. Did you need an extension on the throttle wire?

@Anasmonkey18 7 жыл бұрын

Also for future reference, Yaffe bars usually measure out 2" more than what you order. I ordered 10" for my bike so I wouldn't have to extend anything and they measure as 12" and had to reroute my cables and got really lucky. now I'm installing 16"s lol. getting all new cables this time and internally wiring. 2002 Electra Glide true conversion to Street Glide.

@2MostlyBaldGuysKC 7 жыл бұрын

Jacob Anderson we noticed they were little taller because the red street glide that was in the garage in the video has 12" and mine were taller lol but im glad because im enjoying them.

@kimanigrant254 5 жыл бұрын

So with true 12s on an older road glide, would I have to extend or reroute?

@josephbeaudoin9025 6 жыл бұрын

Video was great about to install mine on a 2007 Electra glide

@jimmystokesjr.2950 4 жыл бұрын

Joseph Beaudoin did you have to buy wire ext. Or cable ext?

@georgeking7013 2 жыл бұрын

How did they turn out on your 07 EGlide? Any extensions needed?

@garycornett9903 3 жыл бұрын

Do throttle wires need extension. Looked like u used what was there

@hawaiibikekahuna8204 11 ай бұрын

So you didn't have to remove and re-pin your handlebar controls? I had to get a longer clutch cable.

@gallier89 5 жыл бұрын

Im confused... Does it work with the factory clutch cable or not. In the video it appears you use the factory cable and re-routed it but then you have captions saying that you did a +4 cable?

@andreiyurkoits4140 3 жыл бұрын

Good question! Wonder the same after watching the video and reading the description. Any luck to clarify this ?

@jasondesch-ym2gc Жыл бұрын

Did you guys change the brake cable or

@BOSS4R Жыл бұрын

Did you have to change brake cable?

@killaxxpr4134 5 жыл бұрын

Hey is this a 2013 street glide ?

@joesevrie3627 Жыл бұрын

What year is the ultra your doing this on ?older then 98 ?

@stephendwinells8260 4 жыл бұрын

Are Those 12’s they look tall... I am stuck between 12 or 14s

@joshuajmcneil 6 жыл бұрын

What is that fairing pouch that fits between your bars behind the windshield? Looking for one for my 14 ultra limited.

@2MostlyBaldGuysKC 6 жыл бұрын

Josh McNeil I believe it's just called windshield bag problem with a 14 is you have the vented fairing so that would be blocked but you could still do it

@justanbiccum3407 3 жыл бұрын

So you didn't have to buy extended brake lines? I have an 08 ultra glide I want to put 12" apes on but the "installation kit" for an abs equipped bike is more than the bars themselves 🙄

@stovallsweddingandvideoser2289 3 жыл бұрын

Roughly how long does it take you guys

@johngray2476 3 жыл бұрын

Where is the link to the 4in extension clutch lever?

@stevenhankins8552 Жыл бұрын

Why 4" extension? 12" bars stock wires should be fine?

@TheBigpappa160 5 жыл бұрын

LA Chopper's 12" Twin Peaks 1 1/4" bars you can use all oem cables, lines and wires! $231.73 on eBay

@MarioSanchez-yd9wy 4 жыл бұрын

What year bike ?

@TheBigpappa160 4 жыл бұрын

Mario Sanchez 2012 Street Glide, but update, I had to get a longer clutch cable, but reused the oem brake line

@blackjack14888 Жыл бұрын

I’m installing Arlen ness modular 13in bars on my 08 street glide, should I need clutch and brake cables?

@itiswhatitis6000 Жыл бұрын

Did you end up needing to extend them?

@blackjack14888 Жыл бұрын

@@itiswhatitis6000 yes I did. I ended up getting a burly cable and wire kit.

@jerry-riverbluffbaggers3910 5 жыл бұрын

Will I have to change cables if I put 10" or 12" bars on my 09 road glide?

@AJV4L2007 4 жыл бұрын

Did you do them

@awedihdaira2786 3 жыл бұрын

@@AJV4L2007 yeah did you done it ? Coz i got 2009 Electra glide & just bought 12" mini ape for it but still not sure if I should get 13" cables kit for it or the original would fit ?!? 🤔

@jontucker7292 7 жыл бұрын

will this same setup work on my 06 ultra classic? I didn't see or hear what year your bike was in the video. thanks

@2MostlyBaldGuysKC 7 жыл бұрын

jon tucker mine is a 2013 so im un aware because of different frames but never hurts to try then if doesnt order longer wires and cables but all i had to change with these bars is clutch cable if you get harley 12" i believe it would work.

@jontucker7292 7 жыл бұрын

thanks, and I appreciate the quick response, very cool channel, keep em coming

@2MostlyBaldGuysKC 7 жыл бұрын

jon tucker your welcome shall try we wish harley would sponsor us because these videos are not cheap lol

@jontucker7292 7 жыл бұрын

2 Mostly Bald Guys Roger that

@71donkrider 6 жыл бұрын

Great video...

@CR-ji4ub 4 жыл бұрын

If you’re in the kcmo area maybe you guys can help me with mine?! 🤔

@harleyrider9991 2 жыл бұрын

Did I miss what year this is? 00-07?

@jeffcomeau9883 2 жыл бұрын

Did you guys have extend front brake line ?

@2MostlyBaldGuysKC 2 жыл бұрын

Nope it reaches

@ispep1162 4 жыл бұрын

Replaced my bars on a 2010 ultra classic and now I have zero power from the battery everything is plugged in I’m confused on why this happened. I’m in the process of backtracking to see if I missed something but as of right now zero power will not turn on at all 😩

@finley614 4 жыл бұрын

Check your fuse also as it may have blown

@jura_cowboy8937 4 жыл бұрын

Ur ignition switch is probably miss aligned. Check videos on KZfaq for instructions

@ridgerc5976 3 жыл бұрын

So when do I bring my 13 Street Glide over to do a set of 12" Twin Peaks? Lol

@bikersagainstbulliesusaohi5403 7 жыл бұрын

Did you have to extend the TBW harness or not?

@2MostlyBaldGuysKC 7 жыл бұрын

Bikers Against Bullies USA OHIO no we did not have to it was long enough on 2013 other years im not sure.

@bikersagainstbulliesusaohi5403 7 жыл бұрын

Thanks. I have a 12 limited. I'm hoping not to extend them on mine as well.

@2MostlyBaldGuysKC 7 жыл бұрын

Bikers Against Bullies USA OHIO your welcome.

@brittdavid8591 4 жыл бұрын

👊🏾

@hddm3 4 жыл бұрын

So can you see out of your stock mirrors after that

@2MostlyBaldGuysKC 4 жыл бұрын

Yes I prefer them down with them up I couldn't see past my shoulders so under I can see better around me. Everyone is different though so I would try it if not put them back it's super easy.

@rwebdaddy 5 жыл бұрын

Why take radio out? Waist of time doing that

@j.p.279 7 жыл бұрын

hi guys, did you extend the brake line??? and if you do what's the new size?? thanks

@2MostlyBaldGuysKC 7 жыл бұрын

Jaime Pacheco Espinoza nope the brake line reached on it no problem

@j.p.279 7 жыл бұрын

this was the original brake line?? mine I think can't reach... I try to solve first the clutch line

@2MostlyBaldGuysKC 7 жыл бұрын

Jaime Pacheco Espinoza yep mine is original

@j.p.279 7 жыл бұрын

My electra is 99 and yours??

@2MostlyBaldGuysKC 7 жыл бұрын

Jaime Pacheco Espinoza mine is a 13 so yours might be different

@B2lazy 7 жыл бұрын

Did you have to bleed the abs system ? I was told i have too. I dunno

@2MostlyBaldGuysKC 7 жыл бұрын

Mr Lazy my bike is non abs and i have never researched it so im unaware of that if you have to

@B2lazy 7 жыл бұрын

2 Mostly Bald Guys i see you didnt even have to open the brake line so long as i dont open it i wouldn't havd to bleed it. But yall did an awesome job. I have a 13 ultra and i wad going go 10's now thinking 12 wire the same way , external

@2MostlyBaldGuysKC 7 жыл бұрын

Mr Lazy thank you just know with 12 you will have to do a clutch cable. But im telling you now well worth it very comfortable ride i love it!!!

@B2lazy 7 жыл бұрын

2 Mostly Bald Guys i kinda like the bars hidden behide the bars not over. Still a thought 10 or 12. What yr is that ultra

@B2lazy 7 жыл бұрын

Is it a classic or limited, last question,

@shanes_bs2659 4 жыл бұрын

So what year Harley is that? You should put that in the title. Decent vid except for using all the wrong tools...

@jasonfaulk1305 Жыл бұрын

Did you ever get an answer? I have a 06 SG and I'm about to do 12".... wondering if I can use stock cables or what all I need without finding out in the middle of installation and having the bike sit...

@RikWCrlsn 7 жыл бұрын

What model year is that bike

@2MostlyBaldGuysKC 7 жыл бұрын

RikWCrlsn 2013 electra glide classic

@JDH8208 3 жыл бұрын

Was the stock brake line long enough?

@andrewsiettmann2363 3 жыл бұрын

I've watched this a couple times to see how they did the brake line. That's the only thing that doesn't look long enough for mine

@goodboyringo9716 4 жыл бұрын

How tall is the guy on the bike at time 17:21 ?

@2MostlyBaldGuysKC 4 жыл бұрын

6'1ish maybe little over that

@goodboyringo9716 4 жыл бұрын

2 mostly Bald Guys.... I have a Roadking and wanting taller bars to prevent pain in my traps. Because the bars cost 400.00 and 300.00 for cables I want to make the right choice in height. I’m 5’10 “ 200 lb . So how do you like 12” or do you think 14” would have fit you better

@2MostlyBaldGuysKC 4 жыл бұрын

@@goodboyringo9716 I think 14 probably would have been better the only reason I went the way I did was I went the max for not changing cables and harness. At the time didn't have money and the bars were stupid cheap. At 5'10 I would say 12 would be good for height. I will say the amount of times my hands go numb is far less which helped alot.

@goodboyringo9716 4 жыл бұрын

@@2MostlyBaldGuysKC ... Yes you did the right thing to save 300.00 on cables. My bike is a 2000 Road king that I bought new so it doesn't have long cables. If I could save 700.00 , (bars & cables) I would but I get pain riding 50 miles so I'll need to do something . Sad day when changing bars cost 700.00

@dalemasyk1583 5 жыл бұрын

well lol that alot of fckin work to change the handle bar , i like the way it was before hmmm that ape hanger kindna looks abit off now sorry however great video

@mikeessary4925 3 жыл бұрын

It's a good thing they put those bars on there bike and not yours right?

@elsworthcook4764 Жыл бұрын

Put the egnition shaft back in to unlock the wheel now can't get it back out. ? Wth

@robertoliff5074 2 жыл бұрын

You should not have to remove the radio.

@JerryFornell 2 ай бұрын

Man those almost look 14" bars.

@rickpiland1667 6 жыл бұрын

@GuruLiving4 3 жыл бұрын

I thought I could do it, I’ll pass!

@addeedo1 6 жыл бұрын

Nice teaching vid...but I think I will just work a little O.T. and pay somebody. Thats ALOTTA cramped, tedious work

@2MostlyBaldGuysKC 6 жыл бұрын

Ralph Martinet yes it is. But if you buy the bigger bars thick it's easier or if you buy bars pre wired even better

@addeedo1 6 жыл бұрын

OK thanks...you two fellows seem like good peeps!

@2MostlyBaldGuysKC 6 жыл бұрын

Ralph Martinet well thank you we try to be. Thank you for watching

@goodboyringo9716 4 жыл бұрын

Ralph Martinet..... Always work on your own bike , save money and learn, also the extra money you'd pay to someone for labor you can buy tools.

@ALPHAFTUCK 4 жыл бұрын

OMF PAINFUL to watch

@hebertscott6969 5 жыл бұрын

The biggest issue yall skipped over. The fly by wire hiw to hook up in the bars. I just waisted 30 minuts. Thanks for nothing....

@mikgto68 7 жыл бұрын

I would of took My time and pulled the pins so you can run the wires internally. ...

@2MostlyBaldGuysKC 7 жыл бұрын

Michael D we did but it wouldnt all fit we sat there forever but the dimple under wouldn't allow us to feed all together needed 1 1/4 bars for more room

@mikgto68 7 жыл бұрын

2 Mostly Bald Guys that a bummer ....they look awesome though!!! I'm getting ready to to 12"hellbent bars on my dyna fatbob! they're 1 1/2" bars so I hope them wires fit lol

@2MostlyBaldGuysKC 7 жыл бұрын

That should work with room to spare remember i have radio controls so extra wires. We had like 12 or 14 wires on each side

@mikgto68 7 жыл бұрын

2 Mostly Bald Guys yea that's true! still looks great with the ferring hiding most of it ...thanks for the videos!!!

@2MostlyBaldGuysKC 7 жыл бұрын

Michael D thank you and thank you for watching