FORD 6.0 Diesel TURBO - 10 MINUTE REMOVAL

No video

FORD 6.0 Diesel TURBO - 10 MINUTE REMOVAL

Рет қаралды 130,909

Күн бұрын

Ford 6.0 powerstroke diesels with turbo repairs this video is a must see for DIY!!!! Welcome! Good to see everyone is back and hopefully healthy! Obviously the video is longer than 10 min but we had some chit chat that we needed to talk about. We got a repair that WE 6.0 techs know very well and that is turbo charger replacement. I had one to do & wanted to show how EVERYONE would want and anticipate their turbo charger replacement to go. LIKE - COMMENT - SUBSCRIBE - SHARE See you next friday!!!!!
Check out my Instagram
@PTT_W_AROD
Music: ------------------------------
Relax by Peyruis / peyruis
Creative Commons - Attribution 3.0 Unported - CC BY 3.0
Free Download / Stream: bit.ly/2RkwcNw
Music promoted by Audio Library • Relax - Peyruis (No Co...
------------------------------
To send a small donation to help my channel grow & to also to contact me, please visit my Paypal at my email powerstroketechtalkwarod@gmail.com
I am the creator and owner of this material. It does not belong to; nor is affiliated with ANYONE, except for me, the owner and creator. Downloading is strictly forbidden. Contact me if you want my material, its that simple! The events, the characters & even the firms depicted in my photoplay are fictitious. Any similarity to actual events, persons living or dead or to that of actual entities are purely coincidental.

Пікірлер: 364

@Graveltrucking 4 жыл бұрын

I changed my turbo when I put a welded cooler in my 05 I changed the drain and feed lines changed the cac boots. I went with a Powermax stage 1 a lot more response oh a lot more whistle sounds like a jet with 4 inch turbo back exhaust no cat just a resonator. Bearings were gone in stock factory turbo vanes sticking unison ring was worn.

@PowerStrokeTechTalkwARod 4 жыл бұрын

Gotta love dem Powermaxx turbos Check dis out!! kzfaq.info/get/bejne/hbV1l7Gfzr23qn0.html

@lizkowal837 3 жыл бұрын

@@PowerStrokeTechTalkwARod i

@6.0hhh Жыл бұрын

Were you getting a whistle/chirp on start ups with the worn unison rings?

@PowerStrokeTechTalkwARod Жыл бұрын

@johnnorris1227 Жыл бұрын

I guess that's one benefit to having small hands and skinny arms. I had to use a magnet once I had em loose to get all but one of turbo bolts out because I couldn't my hands in there to grab em.

@jguilmette 4 жыл бұрын

Hmmm. 10 minutes for you equals 4.5 hours in my driveway. Great job. Love watching a pro at work.

@PowerStrokeTechTalkwARod 4 жыл бұрын

Thanks buddd

@jgatti8742 4 жыл бұрын

Seeing a 6.0 being worked on like this reminded me of diesel tech Ron. Learned so much from him. Gone way too early.

@PowerStrokeTechTalkwARod 4 жыл бұрын

R.I.P. DTR

@PowerStrokeTechTalkwARod 4 жыл бұрын

For ever will miss him😔

@jgatti8742 4 жыл бұрын

Whenever I work on 6.0's, I tell the owners to check out his videos. Can't be greedy with his knowledge because he himself wasn't.

@PowerStrokeTechTalkwARod 4 жыл бұрын

Grounds that this channel stands on

@jgatti8742 4 жыл бұрын

Keep the videos flowing ARod.

@GICK117 2 ай бұрын

I am impressed. I am no mechanic. You pro's make it look so dang easy. I am Just a weekend dude needing a new turbo. I am on 2 hrs. But I WILL succeed, being stubborn and cheap forces that to occur. Besides. We are 3 hours from the nearest honest mechanic.

@arcburn3364 3 жыл бұрын

I was about 64 yrs old when I did mine. I sure as heck didn’t hold it up for anyone to see. That thing is heavy. Good job young man. I love your tools too.

@PowerStrokeTechTalkwARod 3 жыл бұрын

Thank brother, appreciate that!

@chrismaddox15 Жыл бұрын

Been a tech for 20 years in dealership. I can say you have perfected this technique! AwsomAwesome! Thanks for being willing to share it with us. Thanks.

@PowerStrokeTechTalkwARod Жыл бұрын

Thanks for comin' thru & keepin' it real

@Traxxion 2 жыл бұрын

Thanks for this!!! I called my local Ford Dealer for fun, and they wanted 5 hours labor to do this job.... $900.

@PowerStrokeTechTalkwARod 2 жыл бұрын

Awesome

@gobdeep 4 жыл бұрын

Forceps. Clamp. Suction. Bro, you look like a surgeon. Good work!

@PowerStrokeTechTalkwARod 4 жыл бұрын

Lmaoo

@pablomay28 4 жыл бұрын

I removed my turbo when doing the oil cooler change and cleaned it. Taking it out is super easy putting it back in and getting up pipes and exhaust to line up and seal is another story.

@PowerStrokeTechTalkwARod 4 жыл бұрын

Gravy brah

@jessec7821 Жыл бұрын

I don't even have a 6.0 and I just watched this entire thing

@JimmyZ408 4 жыл бұрын

Done one or two of these before! Lol. You know I'm getting old when this is the highlight of my Friday evening. Not that it wasn't highly enjoyable!

@PowerStrokeTechTalkwARod 4 жыл бұрын

Thanks pal

@chrissargent9212 4 жыл бұрын

Love working on 6.0 with the built in hardware sorter on the cowling.

@PowerStrokeTechTalkwARod 4 жыл бұрын

Love it, gotta make sure to clean out the crannys when ur thru😉

@ngeltz 2 жыл бұрын

I have the early 2003 6L so that one bolt may be different (glad you mentioned it). I don't know if my turbo is going bad...hard start, peculiar loud noise - I'll need to check several other parameters but it's making a peculiar/odd noise so I'm suspecting the turbo. At any rate, I watched your video and this will save me TONS of time if the issue is in fact a turbo R&R. Thanks so much for taking the time to assist & inform others. Kudos.

@PowerStrokeTechTalkwARod 2 жыл бұрын

I appreciate chu

@rickdavis1295 2 жыл бұрын

Terrific video! Thanks so much, PowerStroke Tech Talk w/ARod. J Gatti87 : Diesel Tech Ron was the best! What an amazing kind-hearted individual to share so much knowledge. Legendary! Hats of to all those who take the time to outfit and hang your phone or camera, edit, and all the rest to benefit someone else watching your videos. You are all so helpful. Thank you!

@mikemurphy9953 6 ай бұрын

I wouldn't have believed it if I hadn't of seen it! Very impressive.

@PowerStrokeTechTalkwARod 6 ай бұрын

....one of the few NO BS KZfaq channels. Welcome!

@plherrington9947 2 жыл бұрын

Aftermarket malarky, I definitely have plenty of that on my truck. Like someone else said this would be an all day job for me. Great work

@jacobgomez2682 2 жыл бұрын

Nah man they are not bad at all

@ArthurVrancken Жыл бұрын

Thank you very much for this post. I have watched it several times to gain the confidence to pull the turbo so I can change the up and y pipes. Thank you again!

@PowerStrokeTechTalkwARod Жыл бұрын

Good luck Arthur

@paulrodrigues9603 4 жыл бұрын

I did one turbo on a 6.0 many years ago. But it was on an E450 box van. Was a piece of cake. Had our 12 F350 w/ 6.7L dually in for a check engine light today. Seams that the fuel pressure isn't dropping on shut off. Hangs up once in 5 tests.

@PowerStrokeTechTalkwARod 4 жыл бұрын

Hmmm

@yttikdab 2 жыл бұрын

nice

@niceguy4928 4 жыл бұрын

That’s how you roll when paid on book hours. Blazing fast 💨

@PowerStrokeTechTalkwARod 4 жыл бұрын

Woowooo

@WhatzPat Жыл бұрын

That was impressive. I wish I could do that in 5x the amount of time. This video creates confidence that it can be done in the driveway

@PowerStrokeTechTalkwARod Жыл бұрын

ALL day long!!!

@jaysont5311 6 ай бұрын

Yeah Im embarrassed how long it took me to get to that stage.awesome job

@stevenfuchs2548 4 жыл бұрын

Wow that was awesome, There's a man who knows what he,s doing! Great video Arod!!

@PowerStrokeTechTalkwARod 4 жыл бұрын

🙌💯

@unorthodoxridez 4 жыл бұрын

Bolts thrown on the windshield. Classy

@PowerStrokeTechTalkwARod 4 жыл бұрын

Cowling area...keepin it classy San Deigo

@dearderekking Жыл бұрын

well done. I easily turned this into a 3 hour job LOL

@davejaech1553 5 ай бұрын

Good job you do a lot more set up than I do I usually waste a lot of time grabbing tools I can typically get the turbo out in about 20 minutes however getting it back into place is a little bit more of a pain in the ass I struggle with the exhaust clamps to get them off but I live in Michigan it's pretty good environment for corrosion

@PowerStrokeTechTalkwARod 5 ай бұрын

I'm in detroit & still took me 10 minutes

@4truecarlovers Ай бұрын

I look forward to watching your other videos if they are anything like this one... TY😀

@tylermacconnell217 4 жыл бұрын

The 6.0 sounds great. Nice work as always getting that snail out and making it look easy.

@freddyhollingsworth5945 9 ай бұрын

10 minutes is crazy good, my neighbor lost his turbo on a 1,000 mile road tip and the shop charged him $1,800 labor and $1,800, over $4,000 total for a new Ford turbo in his 05 Excursion... turns out the turbo wasn't even the issue, it was a gas pedal sensor or something like that bx it did the same thing 400 miles later...

@PowerStrokeTechTalkwARod 9 ай бұрын

Omg!

@DungNguyen-xo8xp Жыл бұрын

Wow, you make it look easy to remove turbo. Great job brother

@PowerStrokeTechTalkwARod Жыл бұрын

Thanks brahhh

@randywenks961 Жыл бұрын

Yep. One day out. One day in. Heavy and awkward. Next one I pay for my mechanic to do! You make it look easy.

@jakekeller5670 Жыл бұрын

That’s impressive. Good job

@michaelchan8915 4 жыл бұрын

HOLY SHIT!!! That is one clean 2007! Brings back memories of my 2007 before I sold it to get into my 2016. I can't believe I'm actually saying this, but I miss those 6.0 days. Yup you did it exactly the day I used to do it. The bothers I had with doing this job were: those pushpins that retain the wiring loom over the cowl (the MAP sensor one being the hardest without breaking), that damn cheesy VGT wiring connector with the two retaining tabs that snap ever so easily, and once undoing the coolant bottle, pulling it off to side used to make me extremely nervous about possibly breaking that 'y' connection between the heater hose to front cover tube. Looks like this '07 also needs the update drain tube (6C3Z-9T515-A). Can't believe I still remember all the important 6.0 part numbers on the parts I used to sell quite frequently. You guys are still getting 6.0 diesels coming onto your doorstep? I would've thought for us dealership guys that 6.0 diesels would be old news by now! Now...can you remove a 6.0 diesel turbo from an E-Series in that same ten minutes?

@PowerStrokeTechTalkwARod 4 жыл бұрын

Great CHALLENGE!!!

@BrigT262 3 жыл бұрын

Super cool video. Thanks for sharing!

@tomthreelegs4374 2 жыл бұрын

Thank you. That was really, a educational? For a first time, Diesel owner? This will help out alot.

@willylovesand 4 жыл бұрын

Good shit brother. I did a 6.0 turbo last Friday. you know how long I been fighting those air filters I have a new way NOW THANKS. the exhaust clamps I unbolt them and spray them with some good penetrating spray and they usually pop soon after. But I think your back east so probably more pain in the ass with all that rust and salt.

@PowerStrokeTechTalkwARod 4 жыл бұрын

1st to pick up on that....ONLY WAY TO DO IT!

@huntingspud3086 4 жыл бұрын

Made it look easy, nicely done and thanks for making videos for the "rest" of us. LOL

@PowerStrokeTechTalkwARod 4 жыл бұрын

Thanks for watchin homie

@wandanance9324 4 ай бұрын

I would pay this guy more then the ford dealer because he is a mechanic, not an overpaid parts changer.

@PowerStrokeTechTalkwARod 4 ай бұрын

Book appointment let's get your truck inside

@ss0073 4 жыл бұрын

Those Milwaukee M12’s are the chit! I have 18 different tools....that’s all I use.

@PowerStrokeTechTalkwARod 4 жыл бұрын

I absolutely love mine

@jbussey5301 2 жыл бұрын

Nicely done. I'll remember to use these methods and tools when I upgrade the turbo on the 05 F250 I drive. Props man 👍

@PowerStrokeTechTalkwARod 2 жыл бұрын

🤙🤙

@donbelliston7664 2 жыл бұрын

thanks,,I loved it..Wished you lived close, so you could do my work on my 6.0

@selfmadeboss707yt8 3 жыл бұрын

Just picked up a mechanic apprentice job and I’m working on one of theses. Vgt went out along with bad turbo. PCM couldn’t tell something was wrong kept blaming it on the egr. Been to 2 mechanics before us. Put new vgt and fixed the surging it was getting but turbos under pressure now. Rebuilding turbo tomorrow. Just studying. Thanks for the insight

@PowerStrokeTechTalkwARod 3 жыл бұрын

🙋‍♂️👍👌🤝

@3374jj 4 жыл бұрын

Us mere mortals take a day to complete this task... Lol Good job bro

@PowerStrokeTechTalkwARod 4 жыл бұрын

😄😄😄🤣🤣

@reidpowers3932 8 ай бұрын

You have me beat by like 15min lol good stuff 🤙

@PowerStrokeTechTalkwARod 8 ай бұрын

Lmaooooo. Ill retry...bet ill do it again faster hahaha

@reidpowers3932 8 ай бұрын

@PowerStrokeTechTalkwARod dude that was fast as shit lol I always get caught up on the y bands. Always easier after someone takes it apart and lines them up right. Good shit my friend 🤙

@kevindavis5263 Жыл бұрын

It can be done, Now it's my turn.. thanks,great video...on to the Oil Cooler

@PowerStrokeTechTalkwARod Жыл бұрын

Gravy

@1keykneedeep 24 күн бұрын

Nice work my man. I bet u have done that more than once.

@PowerStrokeTechTalkwARod 24 күн бұрын

Do it in my effin' slee0

@oldretireddude 4 жыл бұрын

The 6.0 PowerStroke has become my favorite engine to listen to. I drive a late '99 7.3 but the firing order and late firing injector make the running sound less enjoyable for me.

@rosales1975rosales Жыл бұрын

Hi good afternoon I have a question for u any idea how much a mechanic would change to fix it my turbo I have ford 250 2004 that truck have a good memories belongs to my brother did he pass away last year

@PowerStrokeTechTalkwARod Жыл бұрын

Labor maybe 4 or 5 hrs. Turbo bout 1200-1400 pesos

@kensingletary9391 3 жыл бұрын

YOUR THE MAN!!!

@mr.s7059 4 жыл бұрын

I love it when it's turbo time! 💪💪💪💪 sadly I'm about to be in the same situation before long

@PowerStrokeTechTalkwARod 4 жыл бұрын

Turbski

@mr.s7059 4 жыл бұрын

Ja Ja

@joeyrizk3275 2 жыл бұрын

That man knows whats up.

@The219Beast 4 жыл бұрын

Honestly would’ve liked to see the whole job!!!!

@PowerStrokeTechTalkwARod 4 жыл бұрын

Ehh maybe next time 🙌

@tctwg1 4 жыл бұрын

Thank you for all the uploads 👍. I love this channel

@PowerStrokeTechTalkwARod 4 жыл бұрын

Awe thanks buddy!

@theautomotivegarage 3 жыл бұрын

Another - Great Quality Video Sir, very Informative and Educational. Learning something New everyday. .Thank You!!!

@PowerStrokeTechTalkwARod 3 жыл бұрын

Thanks pal!!!

@Lucariorunner 9 ай бұрын

Thanks for showing this

@DaFrostyG 4 жыл бұрын

Milwaukee needs to sponsor my man ASAP.

@PowerStrokeTechTalkwARod 4 жыл бұрын

Tell em.....they wont respond to thy little fish...

@ricklang5434 4 жыл бұрын

Yes, R.i.p Ron

@lwidinaguilar245 5 ай бұрын

not bad I like to remove the alternator for better access removal and sometimes even loosen the up pipe to get it installed better

@PowerStrokeTechTalkwARod 5 ай бұрын

Yikes I duno about all that

@matthewfort3740 3 жыл бұрын

Pretty cool ARod quickly done.

@PowerStrokeTechTalkwARod 3 жыл бұрын

Hell yeah

@dleemonk7928 Жыл бұрын

That’s when everything went perfect I’ve seen back bolt stripped out that’s always fun! First turbo I ever did on 6.0 took me 61/2 hours lol now if everything goes perfect I can pull and replace in 30minutes! But we are talking about a 6.0 powerstroke lol

@larry9210 Жыл бұрын

That was outstanding! Do you have a video of how long it takes to reinstall it? That would be very helpful

@PowerStrokeTechTalkwARod Жыл бұрын

No....you literally reverse what u saw me do...

@Powerstroke431 11 ай бұрын

@@PowerStrokeTechTalkwARodremoval is ALWAYS way easier than install unless tons of rust.

@dwaynerobertson383 2 жыл бұрын

Excellent video man. Thanks for sharing. I would have went with a different tune but...excellent video. I'll be doing this on my '04 F-350 next week. Hope it is this painless!! PEACE!

@RyanSmith-us8ol 2 жыл бұрын

Im doing it now on mine… ty I knew there had to be a third bolt. Just couldn’t find it.

@BestBettsPools 4 жыл бұрын

14:00 “the ol reach around”

@PowerStrokeTechTalkwARod 4 жыл бұрын

Gotta giver her final hug there while i unmate her from her pedestal🤣

@briank1671 Жыл бұрын

I'm very impressed !

@chadjohnson2853 28 күн бұрын

Brother I am so glad I subscribed to you I step daughter just got one of these with this over boost P0234 code limp mode . Time to fix a ford 🤭😎.

@kwmiked 4 жыл бұрын

My buddy use to bang out jobs like that, once the dealer caught on they banged him with the handy van buses

@Itsdazeni 4 жыл бұрын

Damn that’s impressive lol. Maybe you need some teardown trays bro and top side creeper!

@PowerStrokeTechTalkwARod 4 жыл бұрын

Got both......this is the perfected way

@georgewelford8648 3 жыл бұрын

Your kids got better pipes than your truck! But yes a huge problem for 6.0 owners, thanx Bro.

@seangriest7949 Жыл бұрын

Miss desel tech ron to good guy

@jaime33912 Жыл бұрын

Great job!

@jdmsaywhat 3 жыл бұрын

Damn you're a G bro. Badass.

@americanlawdawg3609 3 жыл бұрын

Holy crap dude 👍🏻

@gurubryant 2 жыл бұрын

I watched this all the way through (quite impressive!) but then went out to my truck and the same old turbo was still in there. How many times do I have to watch it before it swaps out mine?

@PowerStrokeTechTalkwARod 2 жыл бұрын

Hahahahahahahahahah

@DaFrostyG 4 жыл бұрын

Flat rated the shit out of that turbo. Good my guy. Fast I’ve had was like 18 minutes.

@PowerStrokeTechTalkwARod 4 жыл бұрын

Thanks pal

@mikemassegrafixshopmike 4 жыл бұрын

You do enough of em and you can get em apart fast af

@Mutts1979 4 жыл бұрын

The up pipe clamp can be stubborn sometimes. I absolutely hate doing turbo’s on 6.7. They almost pay the same maybe a hour more but way more work.

@PowerStrokeTechTalkwARod 4 жыл бұрын

Buddy, u just inspired me....wait till I SHOW YOU HOW A 6.7 TURBO FALLS OUT 👊🙌💯

@Mutts1979 4 жыл бұрын

PowerStroke Tech Talk w/ARod cool man 👍

@bobbyjacques5541 9 ай бұрын

I do find these instructional videos such a blessing! I have an 03 and have had the turbo off when I did some work to upgrade to an 05 intake along some other upgrades. Just recently developed an oil leak somewhere on top and it's not on or near the oil cooler. Assuming it's the turbo drain tube. I need to update both the drain tube and feed line. Do these older drain tubes have issues normally? Is it critical for the newer drain tube to be in so far as the older tube has a stop? Thanks again ARod!

@PowerStrokeTechTalkwARod 9 ай бұрын

Only problem ive had is people crushin them because they slammed the t/c down on ot

@JimmyZ408 4 жыл бұрын

That was impressive time. Next time I want to see it installed as well in 10 mins. You can do it!! 🤦‍♂️👍✌

@PowerStrokeTechTalkwARod 4 жыл бұрын

Gravy

@PowerStrokeTechTalkwARod 4 жыл бұрын

Ill gett 1 up 👊

@ShawnDunca-bc2ru 7 ай бұрын

Awesome thanks

@jwkustm Жыл бұрын

That was epic!!! I "think" i have a leaking up pipe. Didnt have money to have a shop do it so i am trying..... Watched a couple videos, after seeing this 🤦 bro im like moving at a sloths pace!!! Amazing Thanks for the info and the last screen showing the pulled turbo area, i didnt know where to look for the turbo mounting bolts.... I found i am for sure missing one 😬 Hopefully it goes well. Thanks

@TheDuhop454 3 ай бұрын

Awesome 🤘🤘🤘🤘

@ISAACEverdeen 4 жыл бұрын

Exactly how I do my 6.0s 30min tops out and back in

@PowerStrokeTechTalkwARod 4 жыл бұрын

Yeppp same herrr 🙌💯

@centariprime9959 4 ай бұрын

It's one thing to do it fast. Good for you. But it's another thing to instruct on every step of the way, what to look for, why you're doing it and the pitfalls.

@PowerStrokeTechTalkwARod 4 ай бұрын

That's in other videos pal...

@centariprime9959 3 ай бұрын

@@PowerStrokeTechTalkwARod Yours or DieselTech Ron's, pal?

@PowerStrokeTechTalkwARod 3 ай бұрын

Both

@a.s.l.internationalhorsehe4501 Жыл бұрын

my f350 in time i have to change mine. thank you so much showing how to do it. now. people are telling me i should trade in my truck. i put so much money into her already. i mean a lot of money. should i trade her for a regular v8 4x4 or keep her and get ready for a new trubo. i know i won't get what i did to her. let me know what you guys think. she is a 2005 f350 4x4 diesel. great video dude.

@PowerStrokeTechTalkwARod Жыл бұрын

Thanks pal

@bobcuomo5122 4 жыл бұрын

Nice fast work !!!

@PowerStrokeTechTalkwARod 4 жыл бұрын

Thanks bud

@OneEyedGhoul84 3 жыл бұрын

I work on 6.0s every week and pretty much identical to how I remove them, only I've found I have to take an extra couple min to drain a gallon of coolant to empty degas bottle and remove hose. The whole leaning the degas bottle over still attached trick has bitten me so so many times. They love to break at the plastic connection at the T and being $60 or so to replace, its not worth the time saved.

@PowerStrokeTechTalkwARod 3 жыл бұрын

Yeppp👌

@doughibbard8462 3 жыл бұрын

Broke mine. Thank goodness the replacement is metal.

@robertbevilacqua8548 Жыл бұрын

Do you have a 10 minute install video? Great stuff btw

@niallcosgrove5596 4 жыл бұрын

Pretty sure diesel tech Ron could have done it faster 😉 or srmastertech.. just pulling you're leg good job. the would glad to see someone is still making good content on FORD'S

@PowerStrokeTechTalkwARod 4 жыл бұрын

Thanks pal!!!!!🙌

@codystevens3711 2 жыл бұрын

6.go love it subbed

@mike_adams 4 жыл бұрын

Oooooo ... shame on you! You’re boss gonna be mad you didn’t charge the customer 2hrs labor for removal. 🤪 Amazing to see a pro at work. Great job!

@PowerStrokeTechTalkwARod 4 жыл бұрын

😬🤭😄🤭

@ss0073 4 жыл бұрын

Ohhh, I’m sure he got charged 2 hrs. That’s how flat rate guys make the loot.

@notreconstructed Жыл бұрын

Good job brah

@tedhicks5431 3 жыл бұрын

From what I watched I'd have video and mark every part bolts etc then maybe I could doit. I believe I'll let expert doit!

@PowerStrokeTechTalkwARod 3 жыл бұрын

Gravy

@jackgtx440 2 жыл бұрын

I learned in this video, that while it took 10 minutes, I’d rather take the turbo off my 12v cummins any day if the week over pulling the turbo off my 6.0. 😂

@PowerStrokeTechTalkwARod 2 жыл бұрын

U can keep that cummins trash

@aaronwright561 6 ай бұрын

The pad really helps with the snagabagaphobia

@lumberjackdreamer6267 3 жыл бұрын

Impressive!!

@Coastalguy101 3 ай бұрын

Good work. Like watching a Surgeon. I am going to attempt to change the turbo on my 07 E350 van. Do you know if it’s the same procedure or same turbo? This is my first time mucking about with a big engine and I’m handy with tools. I need to do it myself or I can’t afford to fix it. Any tips or suggestions appreciated.

@PowerStrokeTechTalkwARod 3 ай бұрын

Yes same turbo

@superdave2316 2 жыл бұрын

Awesome job. I'm pulling mine out tomorrow and you've given me hope.....lol

@PowerStrokeTechTalkwARod 2 жыл бұрын

Gravy job broski

@beatboy7kgaming Жыл бұрын

I guarantee this is gonna take me 3 hours in the junkyard🤣

@anthonyhill503 3 жыл бұрын

Nice..gonna take mine off in 2 months

@danielaho5212 4 жыл бұрын

Great content, thanks!

@PowerStrokeTechTalkwARod 4 жыл бұрын

Thanks so much!!

@hawkarhama6674 4 жыл бұрын

well done bro

@PowerStrokeTechTalkwARod 4 жыл бұрын

Budddddddy!!

@jeremymanley5256 3 жыл бұрын

Nice, now show us the quick and easy way to take that third rear bolt out on a 2003-early 2004. I would settle for just that bolt in 10 min. Argh struggling with one right now

@PowerStrokeTechTalkwARod 3 жыл бұрын

Bro gravy....Powerstroketechtalkwarod@gmail.com