Can i use valve box for daystate huntsman

What keeps the valve attachet to the rest of the airrifle? Are there attaching screws or is it pressure fittet?

@@quintenvandijk8725 the valve goes inside a 20mm inner dia tube. Then the tube will have threads and there will be grub screws same length as the tube's wall thickness. I made mine with 26mm tube and 3mm bolts, but I realized it might be a bit fragile, so I will make a new one with 30mm tube and 5 mm bolts.

But I thought it's fragile because they are short aluminium threads, not just bcs they are short. I recommend making it with stainless steel or maybe brass if you want a smaller pipe

@@pcpairgunschannel thank you for your reaction.

terima kasih

👍❤️

Wow nice How many ftlbs/joule?

@@pcpairgunschannel with 9 mm i did about 700 fps so 120 joule. Ore 210 meter per seconde. In 6.35 mm i did 240 to 260 meter per seconde . With the standard air hole at 4.5 mm. So it can go up.

@@florisnr11 very powerful. İs it a homemade gun? Or you install it to a readymade gun? I have seen some PCP gun using this valve called "PCP urko İİİ"

@@pcpairgunschannel home made pcp rifle, als made a pistol pcp, and now i am building a full automatic pcp.

@@florisnr11 that sounds super cool, i would love to see some of it. With this valve I already made a 5.5mm rifle with 60 joule max power (with power adjuster), but I made it with scrap material, so it's a bit low quality, therefore I will be making a new one with the same valve.

Thank you! Cheers!

😁

Thanks

im pretty sure you can buy it in the UK but you do have to keep it below 16 joules of course

Nooo i don't think u can connect this valve anywhere in that gun... It's mostly meant for homemade air guns (I think). Ur shot count will depend on the hammer (how much power) pressure range and tank size. for me my tank is 0.3L and i usually shoot around 28 ftlbs (38 joules) with my power adjuster between 2000-3000 PSI and get around 45 shots with that pressure range, but the power is not perfectly balanced in that range, it's like between 26ftlbs and 30 ftlbs

harga valve 600.000 mas tautan dalam deskripsi jika Anda tertarik.

It's for homemade air guns

link beli ada di deskripsi digunakan untuk pipa id 20mm

It can’t be stored at under 1k psi as it will leak out slowly but you might be able to make a weaker gun using 800 psi

@@pcpairgunschannelI want to build an air gun with 1500 max psi. Can you recommend me a cheap valve? I’ve seen one called a super well mentioned. I need the valve to also include the output part (idk what it’s called, the thing the firing pin strikes to release the air). If you could link a good one that would be great

@@Afeller this will work for that but the shot count and power will be a little lower. I don't really know any other valves you could buy that are meant for a lower pressure rate. And if you want a cheaper valve, I don't think you can get them unless you live in Indonesia or The Philippines where you can buy air gun valves from shopee or lazada

​@@AfellerIt will be easier for you to remove the valve from the fire extinguisher, then replace the spring in it with a lighter one, it works at any pressure

No

It's for homemade air guns, unless you can modify your air gun to fit the 20mm valve housing into the hammer housing.

Unfortunately no sir, this is mostly meant for DIY PCPs. But if u own a lathe and have some materials u probably could do it, but i don't recommend doing it since its very easy to mess that process up. If ur valve is broken i recommend looking at some valve repair videos. And never try to fix pneumatic things if there is pressure!!!

Hi, sorry if I didnt understand properly but here are the sizes the hole for the stainless steel valve is M16x1, for input valve M10x1, for pressure gauge M10x1, the connector to the bottle is M18x1.5, and the connector is attached to the aluminium block using a 1/2 inch thread.

if you didnt understand something, or i understood the question incorrectly please let me know.

@@pcpairgunschannel I was wondering the thread size is on the silver valve .it can unscrew. I no the paint ball tank side 18m 1.5 thank you for your help 👊✌️🍻💯🎯🛠️

​@@josephsaucedo8691 The valve itself is m16x1, but you can buy ones in m18x1.5 too, heres the link s.click.aliexpress.com/e/_DELCt0N just select the m18x1.5 one

@@pcpairgunschannel thank you very much 👍👊✌️🍻💯🎯🛠️

sekitar 550.000 rupiah, jika berminat link ada di deskripsi

hey yes, we spoke earlier. what you should do is pull the valve pin outwards a bit, but not so hard that it comes out, hanging it in the air by the pin could be enough, then while holding it just pump a few strokes and there shouldn't be a lot leaking. then pump to the high pressures since it shouldn't be leaking that much anymore, leaking stops 100% at around 1000 PSI, and will stop noticeably at around 100-200 psi

sometimes its just caused because the spring isn't pushing the teflon seal balanced enough, so it leak from a very tiny hole around the corner

@@pcpairgunschannel thank you for the advice sounds about right, your knowledge around this is the best I've found, I will try and report back

@@pcpairgunschannel Fantastic this seems to work as intended the leaking air seemed to reduce as i pulled the pin out further and as the pressure increased somewhere near 200-300 psi reduced almost to nothing but i didn't got much higher as i do not yet have the remaining components, thank you, have a great day!

@@Sean-- great, hope you will have fun making your project, you can store this tank and valve under 3000 PSI

valve about 40$, tank 20$-30$. links in desc

It's mostly meant for homemade guns, but it won't work for crosman since the inner diameter of the hammer housing tube isn't 20mm.

@codebuddy8315 thanks that's why I thought I'd ask they look very close in size to each other.

Thanks brother. Since AliExpress is banned in India, there aren't many cheap choices to buy the tank. Best way I found is eBay www.ebay.com/itm/124818022733

I think on banggood.com it would be cheaper but i didn't find one. You can try yourself if you get luckier

Thank you bro i suppose to buy from other site am also planning to make air gunpcp

@@nirdoshbara3618 awesome. I am interested to see how your air gun turns out

@@nirdoshbara3618 do you own any PCPs?

this isn't capable of that much. at 22 cal around 40-50 joules is the best this can do, but at larger calibers like 9mm around 100-120 joules is as high as it can go.

Terimakasih 🙏

I made a homemade PCP gun with this, you can check it on my channel

Anda bisa, tetapi Anda perlu menyesuaikan kekuatan pegas. Jika Anda menginginkan 100 tembakan, itu tergantung pada rentang tekanan dan kekuatan. Jika rentang tekanan Anda 4500-2500 PSI misalnya, perkiraan saya adalah Anda akan mendapatkan 100 bidikan antara 1050-1150 FPS dengan 10,8 grain.

​@@pcpairgunschannella mía dice 4500 de entrada y 4500 de salida se puede montar así mismo

It might be possible but its gonna need quite a bit of modification to the point where i don't recommend it

ok cheers ​@@pcpairgunschannel

sorry it's not possible

with heavy modding yes, but generally no. So i don't recommend it. the 1377 tube is about 19mm while this valve is 20mm, therefore you'd have to turn this valve down to like 16mm too so that it would fit in the tube

enlaces en la descripción

No sir, it's for DIY PCPs.

If you no were a machine shop is you can have them make a adapter and remove the universal valve to screw in the adapter it in to a crossman valve and in to the super well block. . Are you looking for a drop block adapter?💯🎯🛠️

valve 1900 peso bottle 1200 peso hindi ito co2 tank pero pwede mo itong punan ng co2 sa gas form kung yan ang meron ka. Ito ay kadalasang sinadya para sa pagbuo ng iyong sariling custom na PCP rifle. narito ang isang halimbawa kzfaq.info/get/bejne/ic6RntR1l5OVn6c.html

ok bro

PCP pump

how isnt it aligned

@@thepblaze Its not regulated so no output, it’s for 3000 PSI

Yes, you can find all the links in the description. Check them

bạn có thể mua từ các liên kết trong mô tả

what do you mean?

itu buat senapan angin bikinan mas

Can you elaborate sir

yes, takes a few minutes

links in desc

it won't fit in that gun without modding, sorry

@@pcpairgunschannel modify is possible or not to Strom rider is?

@@tassartanang117 i guess its possible but its not easy, and will need lots of tools and precision. I don't know how it would be done

tidak cocok untuk itu. ini untuk bocap jawa id 20mm.

Boleh order boss? Send ke Malaysia...

​@@youtubetube469 ya. dalam penerangan

maybe 50-80 shots at 12-15 ftlb probably.

@@pcpairgunschannel thanks for your reply. are you on rumble or anywhere else in case you are takem down? love your channel.

i'm just on youtube, i doubt KZfaq would take my channel down. I'll just have some demonetization issues@@peterRobinson10101

​@@pcpairgunschannel Why would you get demonetized?

KZfaq could potentially see these videos as threatening firearm related content@@Just_A_Casual_Fan_Sorry

tidak, untuk bocap jawa

the buy link is in the description

Hello sir, the product is still in stock. Please let me know if you can buy it Links in description

I am not sure sir, for co2 to PCP conversion you just need to replace the CO2 with air cylinder. ngunit wala akong karanasan dito. mangyaring tingnan ang ilang iba pang mga video ng conversion

terima kasih klep z 650.000 rupiah dan link beli ada di deskripsi. Saya pikir Anda dapat menemukan versi yang lebih murah dari shopee, jika menurut Anda terlalu mahal. dengan shopee Anda akan mendapatkan pengiriman yang lebih cepat juga

The parts are in the description. I have provided links, just tap the title of the video and it will open up the description

links in the description to order

sa tingin ko ay hindi

@@pcpairgunschannelah ok Po salamat po sa kaalaman

I don't have access to Chinese websites, you can search for PCP Z valves.

tautan dalam deskripsi

hello sir hiwalay po yung tank at valve, if interested pa po bilhin nyo po sa description, dun po nakalagay. Valve 2900 peso Tank 1600 peso

Yes, you can buy it from the link in description. AliExpress links

Assalamu alaykum, if you are still interested in this product, please check the purchase link in our description I will look forward to your response