Peltor ARC rail helmet conversion 3M Peltor install

No video

Peltor ARC rail helmet conversion 3M Peltor install

Рет қаралды 63,087

Күн бұрын

Let's say you now have a cool new high-speed helmet with the ARC rail conversion kit for your 3M Peltor headset. You took one look it and said nope! This video is intended to get you over that hump and back in action with minimal stress, cursing and downtime. If this was helpful, drop a like! Stop by my Patreon to support my channel and say hi there as well: / 1empyre
If this was helpful, click the link and buy something, anything! I get a small comission if you do.
Peltor ARC rail adapter: amzn.to/3z3ISjS
Peltor Sport Electronic Headset: amzn.to/3z3ISjS
Casio watch: amzn.to/3TKanIB

Пікірлер: 48

@gr33dyglutton 4 жыл бұрын

Thanks for the video, but I think you have the adapters on the wrong sides of the helmet. You mentioned the longer legs, which hold the boom mic, the mic should be mounted on the front of the headset and you have your longer legs oriented at the back. Maybe that's why you had such a hard time getting them in the arc rails?

@1empyre1life 4 жыл бұрын

That could be true, I'll try and verify. I don't use the boom mics, but it will probably be self-critiquing if one were to try using a backwards boom. Thanks for the heads up!

@amschind 3 жыл бұрын

There were about 3 points during this exercise where I said "I'm going to break this damn thing." It's VERY helpful to have someone show you what you can and cannot accomplish with additional force, and as simple as this video was it performed that task to a T. Thanks so much for a great instructional video.

@1empyre1life 3 жыл бұрын

You're not alone on that one. I'm honored to help, and thanks for the great comment!

@jesterapp Жыл бұрын

Thanks man. They didn't have these attachments in the army. Without you, I woulda gotten real pissed off.

@1empyre1life Жыл бұрын

Hell yeah, brother! I'm honored to have helped.

@Darth_Smittious 6 жыл бұрын

"you can go into the back, you don't have to go into the front" LOL, Thanks for sharing

@FT4Freedom 2 жыл бұрын

I'd definitely try the rear entry with lube.

@shawnpagel4217 2 жыл бұрын

Lmfao

@tomaskroupa3288 11 ай бұрын

Thank you man. I would never set it with out you 😀

@THEBEAST4157 Жыл бұрын

Lifesaver

@romagnolo 6 жыл бұрын

Finally a video that helped me! I was having some difficulties to put my rail adapters in place and that idea of using the table to push it was great! Thanks.

@1empyre1life 6 жыл бұрын

romagnolo Thanks for the comment, I'm glad the video helped you!

@wisesage3289 7 күн бұрын

Thank you. Very helpful!

@1empyre1life 7 күн бұрын

@@wisesage3289 you're welcome! It's awesome to see an older video still helping people.

@armeddiver 6 ай бұрын

Thank you. The video was a huge help.

@1empyre1life 6 ай бұрын

You're welcome. I'm glad it helps!

@FT4Freedom 2 жыл бұрын

Little bit of silicone lube or PTFE lube dabbed on slide surface will defo reduce force required. I'm sure it's still difficult but less so.

@1empyre1life 2 жыл бұрын

That lube idea definitely could help. The only concern would be how well it stays locked in place afterwards, but it's hard to imagine what could actually cause a concern for that to happen. Either way, thanks for the comment!

@curtism2095 5 жыл бұрын

Thanks for the video. It was a big help.

@1empyre1life 5 жыл бұрын

Thanks for the comment! I'm glad to help.

@Matilda6448 5 жыл бұрын

Thank you! Good video brotha!

@scully1622 Жыл бұрын

I used too much force putting one of these on my helmet - the thing slipped straight through the rails and sliced my finger! Making the arms 'click' definitely feels like I'm gonna break it lol

@AlexanderYK76 2 жыл бұрын

Thx! 💙💛✌️

@nick3777 Ай бұрын

Could I do the same with Peltor Tactical 100s? Looking to mount some to my helmet instead of buying some comtacs lol

@yeonhohproduction5457 3 жыл бұрын

I fucked up my comtacs doing that.. my right cup do be going static game strong tho😌😌

@excurrahee Жыл бұрын

Much easier if you go from the back

@Schwetttyballz 5 жыл бұрын

Loosen the screw and it slides easier.

@1empyre1life 4 жыл бұрын

Not true. The screws adjust the amount of force required to rotate each side.

@thesydneymilitia8668 4 жыл бұрын

you put them on the wrong way around. the mic boom is meant to attach to the front leg.

@ChristiannTyler 5 ай бұрын

So you run the cord over the helmet not through? Is that personal preference or..?

@1empyre1life 5 ай бұрын

There very well may be a better way to do it then I did. So if anyone wants to comment on this to weigh in I'm sure it would be appreciated, but thanks for the question!