"I don't care how you call it." I can't remember the last time I laughed so hard. Nicely done, Marius.

Absolutely right. Who cares what it's called? As long as it's only EVER measured in metric.

Your work is nowhere related to my profession but I watch your every videos and enjoy a lot. I must say that I'm absolutely addicted to your videos. Nice work as always and all the best for your future projects.

An advantage of Al over Fe is that if you make a mistake and happen to hit a dog with a woodworking tool, your tool won't be scrapped immediately (provided the speed is appropriate for wood). See how I avoided the whole Al discussion?

Your eye roll when talking about reusing the old weight handle was hilarious to me, as it's the same face I've been making when reusing materials that my own parents have collected over the years. I've found parents just don't want to throw stuff out, but that's good for us!

MEXICO te saluda. I have seen your 155 videos. I finished today. I really enjoy your work, your video production an of course your post production. What I really like is your dedication to measuring, congrats. Keep the great work. Your no1. Fan

Alumi-numi-lumi-mumiun. That’ll work fine. Another great video, ausgezeichnet Marius!

Awesome work Marius! 😃👍🏻👊🏻

Great video Marius, thank you for sharing.

Great video. Looking forward to the next one! You were so methodical measuring the spindle angle I'm surprised you didn't use trigonometry to calculate the exact shim thickness needed as well. Well done regardless.

that's a really nice looking machine with some convenient features, I need to price one with a 8x4 cut area just to see how crazy that gets pricewise

Hello Marius, I take a measuring clock in the swing. it go must faster. also you can dril 2 holes for M10 orso in the head mount next to the bolt , then put a adjustingbolt in so that you not have to remove the head

Nice. Thanks for the good video. I am amazed each time I watch a new video at how precise and well thought out your projects are. And as far as that silver looking metal alloy. We just pronounce it like it’s spelled. ALUMINUM there is only 1 vowel at the end of the word.

Some unsolicited advice: If you have one, using a torque wrench to fasten the bolts for your spindle mount helps a lot in avoiding over/underfastening (especially if you get angry after having to do it over and over)

THE KING MARIUS IS HERE.

:) The sinister tone in 'Guess what....I don't care' - Brilliant! P.S. you were right with Aluminium ;)

Good idea i like it

using the hold down clamps to fix the mdf strips also had a secundary benefit, it made sure the spacing was correct.

Super precise CNC router table set up - can't wait to see the CNC workflow being more and more embedded in your projects.

Honestly, as an American I am pretty sure that we have it wrong, because the first time the word appears in print here it was misspelled. That is to say, when I call it alumin-E-um in front of other people I immediately tell them that I watch Top Gear and they just shrug. You're not the only one that doesn't care.

Einer der besten und umfangreichsten Kanäle hier Was mich ernsthaft wundert is warum du nich Millionen Abonnenten hast, wahrscheinlich is manchem das zu hoch was du da so treibst Mach bloß weiter so Ach ja und es heißt AL 13😅 MfG Tobi

Marius, Aluminium or Aluminum I can tolerate either. I can even ignore the American belief that the majority of the world will see the light and return to fractional imperial measurements in order to save them from having to bother with learning new stuff. What really presses my buttons as a grumpy old Anglo Saxon is the way our friends in the US pronounce soLdering as soDDering. It seems to be a national with speech impediment. 😉😉😉😁 Cheers Eric

I first thought you chose the more time-consuming method with the feeler gauge for the lack of a dial indicator. But then you use the dial indicator to check for any steps from surfaceing. I guess it would be way easier if you mount the dial indicator to your wooden extension. ;)

I'm totally taking credit for the "gluing MDF to plywood" idea xD [EDIT: I mean ideas aren't really worth much compared to the work of actual implementation, but hey it makes me feel important so I'm clinging onto that]

Hello Marius, if you would use a dial gauge directly as a probe, you would not have to work with the measuring strips. I use this method to align the table of my drill press. Regards Klaus

Thanks Marius, you inspire me to bother to get it 'right'....sadly, a rare phenomenon....

Try the masking tape and superglue method for affixing the MDF. It's just as secure as glue, is way easier to pull up later, and it would take about two minutes per slat. ;)

Yeah we sometimes call it "amelinium" because once there was a video with guy who misspelled it saying (loosely translated) "this is amelinium, You won't be able to paint it, unless You use special amelinianowa paint"

Máquina linda

You should put the head of the bolt in the T-nut, with the stud facing up. Then you can use a wingnut and a washer to tighten down your hold downs, and the length of the bolt doesn't need to be changed, one size fits all, since the screw isn't moving down towards bottoming out against the T-nut and the base.

Just go the german way and call it Alu. Fits for Aluminum as well as Aluminium ;)

It's called amelinium ;)

Water + MDF = Bad for (aluminium) cutting Water +(Playwood) marine = Good for (aluminum) cutting. Nice work dy the end.

Ausgeseichnet arbeit, Marius. Du bis richtig - im Deutsch und Englisch - "Aluminum" MFG von Romeo, Michigan, USA

Ignore the septics, it's called Aluminium!

Of course it has to be called what the first person who discovered/invented it, named it. The metal was originally named aluminum by Humphrey Davy in 1812. This, however, upset some other scientists of the time who thought it should use the -ium ending, like sodium, calcium, magnesium etc. (and some who thought it should be called alumina).

Marius, these are ingenious! Would you please include links to the hardware used in the 3D printed parts?

I normally don't thumbs up a video (nor comment) but the comment about the name of the metal at the end was just too good.

I wonder if it would be a cool idea to use a laser to adjust the tilt of the spindle. Something like polishing the shaft and pointing a laser along the X and Y axis at the shaft so it mirrors the lasor on to the bed. Man... I don't know how to describe of what I am thinking of...

Juhu👍

What surfacing bit did you use? All I have found have an imperial shaft size, not metric.

Great content as always, spelling error in video title, it's spoilboard

Marius, keep up the great work, and for the record, it's solid tin foil.......lol

Schöne Halbzeugsammlung

That weightlifting bar looks quality and has sentimental value.. Should save it and just purchase new material... 🧰👍🏻🏎

Since you glued the MDF on top, how do you remove it to replace it?

How do you plan on replacing the spoil board since the fasteners are now below the glued mdf surface?

Hast Du für das Planfräsen ein Programm benutzt oder bist Du händisch die Fläche abgefahren? Welchen Fräser hast Du dafür benutzt? LG aus Bayern

On this type of machine, is there any possibility that the gantry is not perfectly parallel to the bed? I thought you would shim the gantry support legs, but you shimmed the motor mounts. I suppose any variation there was compensated by flattening the spoilboard first.

Mission accomplished on the Aluminium. Now this: "I don't care HOW you call it" Well I can call it loudly, softly, while doing jumping jacks or by morse code. But that doesn't change WHAT I call it: Aluminium. Have a nice one.

3:20 Why not use the indicator on edge on your tramming tool instead of using shim/feeler guage?

Proper name is space metal

Marius are you going to put a "bridge" in the back to support the workpiece further out if needed?

German guys as we are know, its caled Aluminumum

Is that a Gru Industries logo on the jogging wheel?

I don't think the aluminum (aluminium) cares what we call it either...ha!

what are you going to do when you want to replace the wasteboard?

Do you have any problem with axis X? Drive solution on this axis doesn't look too precise as for other axis. I'm not expert in cnc but I asked some cnc owners and cnc sellers and they really don't liked this solution. Also I found out that in specification is sometimes backlash 0,1 mm and sometimes 0,01 mm. I suppose that first value is right. Hammer dealer wasn't able to confirm it. His response was that 1 mm is enough for wood (by some norm specification). Can you do some stress test video? I'm thinking that I will buy that machine and it could help me decide. Thanks.

I'm not a fan of wood base.. you need something firm and robust, but maybe for light works..

The proper way of saying and spelling it is Aluminium - that goes with the rest of the elements... Magnesium, Sodium, Potassium, etc. The "ium" is Latin and is used to form abstract nouns and verbs. There was a spelling mistake on the name back in the 1800s, and because North America is lazy, and had already got used to saying it a certain way, they refused to change. But like you said, you don't care how people pronounce it :) And really, why should anyone. They sound similar and you know what they're talking about.

and why haven't you used the dial indicator in the first place when trimming your spindle ? just mount the indicator instead of that metal pin on the end of your trimming jig..

6:32 What is that arrow?

When you hear people say "Aluminum", it's an indicator that they are in North America typically.

I want that screwdriver, would you link it or mention the manufacturer?

Please let me know what is the model of your CNC router?

The dumble without the weights is called metal. 🙃

The plywood / MDF lamination seems a bit needlessly overengineered. Can you not get thicker MDF?

whe should call it fool's steel (zu deutsch Katzenstahl)

Marius can you please cut the end off that zip tie. It's driving me insane.

What happens when it's time to replace the MDF?

Bauxite guts.

After you showed the dial indicator, why didn't you just use a dial indicator instead of the outer pin in the tramming jig? That's how you tram real mills and you wouldn't have to fiddle with those gauges. As I scan the comments to not repeat something someone else already mentioned..well there it is, someone has already mentioned that. The dial indicator doesnt fit under the gantry? That's a surprisingly tiny Z height for the price of that machine if that small dial indicator can't even fit under it. From the video it seems like it would fit just fine, the top part looks to be below the lowest joint of the holder that is mounted on..?

What's the point of arrow at 6:32?

Aluminimum.

Can i also get one in adult size?

Hierzulande sagt man wohl алуминий. Also nichts, wo man nicht drauf kommt... Bei mir isses einfach Alu :-P LG aus BG

It's not called "Aluminium" or "Aluminum". It's called, "Compressed Tin Foil".

I'm sure it's called allu-troll, Right? 🙃

So I don't have a CNC machine, so what do I know, but instead of spending all that effort to make sure the spindle is perpendicular to the table surface, why not just keep planing down the table surface? Wouldn't it eventually become perpendicular to the "crooked" spindle? Honestly curious.

in German it is Aluminium so in Englisch is it to . . . . . . for me anyway

A-LOOM-e-num! 🤣

There is no discussion, it's simply aluminium.

Whatever about Aluminium, can we please get “risotto” right!

Metal good wood bad

Aluminium

What the he'll was it? Lol.

Aloomimium

Alec Steele answered that question, pretty definitively from a historical context, in a recent video- it IS the American pronunciation.

Great video, but this is a wrong way to tram the spindle and surface the spoilboard. The right sequence is to tram the spindle and after to surface the spoilboard. And to tram the spindle you need a surface reference. Something like in this video kzfaq.info/get/bejne/fOB2g8SV1MCsZYU.html. Of course you can use your jig like it is or with the dial indicator.

ITS CALLED NUCULAR

Is there a reason not to use a dial indicator with the jig?

No truth in your horizons

Don't you just hate it when boogers stick to your finger when you are trying to video an episode?

A-loony-um

Alumaniniumum

I think it is allumminion. 🤣🤣🤣

Aluminum... weightlifting bar??? Of all the places where you want to save weight... this isn’t one! 🤨

Was it mined in a British Commonwealth country? Aluminium. Mined anywhere else? Aluminum. Made from recycled scrap? Scrapyard = mine. Don't know? Cannot track it down? Just do not bother with the extra syllable. Or just call it Element 13.

Aluminum to me Aluminium to some You can shine like silver all you want But you're just aluminum

man just stop wasting space in z axis :)