Performance Engine Coatings At Home

Performance Engine Coatings At Home | RM250 Rebuild 9

Рет қаралды 121,569

4 жыл бұрын

★Enter to win my RM250 when it's done! www.prymemx.com/pages/rm250gi...
★My Store (Pryme) www.prymemx.com (Shirt giveaway has ended)
Cleaning Wheel Adapters www.prymemx.com/collections/w...
★Video Sponsors
Cerakote cjn.mx/cerakote
Caswell Plating cjn.mx/platingkit
★RM250 Parts List www.prymemx.com/pages/rm250
In Depth Plating Video • Ultimate Guide To Maki...
The RM250 engine needed a little spice, so here's a video on doing performance engine coatings at home!
★Supplies Used In Video
Micro Slick Cerakote cjn.mx/microslick
Tungsten Cerakote cjn.mx/tungsten
Clear Aluminum Cerakote cjn.mx/alumclear
Graphite Black Air Dry Cerakote cjn.mx/blackaircure
Cleaning Wheels www.prymemx.com/collections/c...
Zinc Plating Kit cjn.mx/platingkit
Air Die Grinder amzn.to/2uV78GV
Dremel Rotary Tool amzn.to/36R2iIp
Buffing Machine cjn.mx/baldor
Respirator amzn.to/2zPKoaN
Rubber Gloves www.prymemx.com/products/rubb...
High Heat Masking Tape amzn.to/2VxLDIQ
Masking Plugs amzn.to/2Hea7Ow
Scapel amzn.to/2EUWRgk
Exhaust Fan amzn.to/2vT39bq
Tools www.prymemx.com/pages/tools
★Business/Social Media
Pryme www.prymemx.com
Instagram / cameronniemela
Facebook / cameron.niemela
★Camera Equipment
cjn.mx/camequip
★Ways to support the channel★
Bookmark the affiliate links below to make your purchases on Rocky Mountain or Amazon.
Rocky Mountain: cjn.mx/rmatvmc
Amazon: cjn.mx/amazon
★Send me mail:
Cameron Niemela
PO Box 704
Deer Park, WA 99006
#TEAMPRYME

Пікірлер: 295

@christianlockwood4314 4 жыл бұрын

“I got pissed and punched that”😂😂 my favorite line so far

@maverick2242 4 жыл бұрын

pissed with the printer, who hadn’t had a printer moment, classic though, see he is human 🤘🤙

@stealthenforcer1907 3 жыл бұрын

@@maverick2242 its hard to imagine him getting angry he always seems cheerful

@LP-kb1yo 4 жыл бұрын

Was listening to Kyle Brotherson’s podcast and i got a notification that cameron uploaded a video, was like “later kyle 😂”

@Dirt_Bike_Dave 4 жыл бұрын

That is so funny ...same thing here.😂😂😂

@justinpeterson8754 4 жыл бұрын

Totally. I think Kyle would do better if he released one video a week.

@lrnspprs 4 жыл бұрын

My OCD Satisfaction has reached its peak today. Just wow Cameron they looking hella pryme rn🔥🔥🔥

@VlogEpicness 4 жыл бұрын

It’s the intense attention to detail that is making this thing so amazing. I wanna see the bike in the Portland One Moto Show next year 👌🏻

@chasebarragar6961 4 жыл бұрын

I’d be interested on a Torture test on cerakote oven bake vs air cure

@armandoberoi 4 жыл бұрын

from my experience, oven bake would excel on almost any test, the air cure stuff is essentially the safe durability as spray paint.

@Goonies-ww3xx 4 жыл бұрын

Keep up the great work can't wait to see when she's done, love the work and patience you put into them to give those bikes a 2nd chance at life.

@wyattbaird5020 4 жыл бұрын

youve got me hooked on cerakote. I literally have done it my engine covers, linkage, handle bars, and all kinds of breakets n shit

@mm7460 4 жыл бұрын

Do you use an oven to cure it or air cure, does it hold up well to wear? Want to cerakote some parts but don't have a spare oven and wondering wether they won't look good after a while

@wyattbaird5020 3 жыл бұрын

@@mm7460 where I work there is a spare oven, and I use that. Havent tried air curing it. Cerakote does make an air dry product, however its basically overpriced spray paint. I've had much better results with the oven cure stuff. After three years it still looks new on my brakes and shocks.

@cameronwhite1011 4 жыл бұрын

As usual, superb attention too detail!! My favorite part about you and your channel cam, just getting into my klx110 build. Frames just been prepped and painted and now onto a full engine rebuild with the full 143cc kit 🤘🏼 definitely stoked on possibly cerakoting some engine parts on it. Thanks for the informitive videos

@epicbagelswag 4 жыл бұрын

Honestly your videos are the only ones I can sit through and be interested the whole time. Love how meticulous you are with everything.

@davidjenkins2011 4 жыл бұрын

Been doing a RM 250 rebuild whilst on lock down and these videos have been epic. Depressing because I can’t replicate the same results but it’s nice to dream haha. The amazon links to the tools is great too 👍🏼

@wingdwolf56 4 жыл бұрын

Really a labor of love here...and you are the most patient person I’ve ever seen.....well, other than the wall! Great work!

@mariusmyhree 4 жыл бұрын

Dude you had me at 14:55! I’m laughing so hard. Keep it up bro and stay safe with that dremel😂

@AudreyH48 4 жыл бұрын

Coming from a automotive restoration background I get the feels every time the parts come out of the plating, or refinishing. It's worth the extra time and effort! Such a beauty! Going to be the best 02 RM250 on the planet!

@robertwoods2505 4 жыл бұрын

Wow, you take parts that look ready for the metal pile at the dump and give them new life. Fastastic work Cam. So impressive!

@sparky_zap69 4 жыл бұрын

Always love the attention to detail in your builds and videos!

@reilrobert2912 4 жыл бұрын

Mint mindig a profizmus ! Imádom nézni ezeket a videókat sajnos nálunk ilyen dolgokat nem lehet beszerezni és kapni ezért is csodás ezeket a műveleteket látni.👍

@f1hotrod527 3 жыл бұрын

re-plating the hardware, next level, Really Random Channel would be proud.

@jimmadonna1436 4 жыл бұрын

No need to apologize! Happy to see you healthy and wearing a Tyvek suit. Epic results. The Dremel attachments ROCK.

@archchrisler23 4 жыл бұрын

Hats off to you man. I really admire your being meticulous and attentive to details. Thanks man.

@tomatoknuckles 4 жыл бұрын

1st off i hope you're doing good. Absolutely love your work man. Someone is gonna be very lucky getting this bike. Oh and long video's are good.

@AndreaCampaner88 4 жыл бұрын

That is freakin fine!! Always dreamed of being able to do the whole restore process. Congratulations, really admire your dedication

@johnbennettiv 4 жыл бұрын

Good to have you back, Professor. Beautiful work.

@triplec3804 4 жыл бұрын

Video is not to long. Im addicted to watching! Looking good! Cant wait, to see this thing finished!

@bryanwilliams7380 4 жыл бұрын

That zinc playing is off the charts amazing! keep up the great work Cam!!!

@Sleepy_g11 4 жыл бұрын

Hey Cameron, im 12 years old, when i was 10 i found your channel and you inspired me alot, i got my own little dirt bike and started fixing it, it was trashed, your video's helped me get it looking and running amazing, at only 10, your videos can help you learn so much and are really entertaining, your a beast with a hella cute wife too, im now 12 and work on bigger motorcycles just rebuilt a honda cb750 whole top end myself, thanks cameron, keep it up!

@sawyertarnanen5580 4 жыл бұрын

Keep making these videos that help me think what I should do with all my bikes.

@UlisesGlez26 4 жыл бұрын

Every part came out perfect! You just keep making everything perfect haha, I love it

@tomnekuda3818 4 жыл бұрын

Really good to see you back.....looked several times.....was a bit concerned but, hey, it's all good. Welcome back!

@rubencriviDT 4 жыл бұрын

Sweet! Can't wait to see that engine assembled! Keep it pryme!👌🏼

@kevinlepage123 4 жыл бұрын

Camtastic once again keep up the good work it's just perfect

@hannujantunen1163 4 жыл бұрын

Nice Job Cameron. Ive been watching a few of your videos and I find them very well made and thought out. Keep up the good work!

@mudstick2509 4 жыл бұрын

It's looking great! Can't wait to see it all together

@mxrider2strokebraaap54 4 жыл бұрын

Can’t get enough of these fresh parts🔥 Great vid!

@marcogenerator 4 жыл бұрын

Sei un vero artista !! Grazie anche per la traduzione 🙏🙏👍👍

@nick_3771 4 жыл бұрын

Bro-everything is looking sick! This is over the top.

@richardtschida2321 4 жыл бұрын

Wow that's awesome your attention to detail is epic Cameron. Very nice 👍

@Iamalizard 4 жыл бұрын

Awesome work on the engine! I have to say, I use electrolysis to remove the zink because it looses its shine over time, then polish bolts etc. and then blue them with a torch, somewhat you did on the exhaust on the Honda 450. looks like jewelry on my tools, bicycle and pretty much everything in my house where screws and bolts and nuts are used. Speaking of jewelry: I am going to give my girlfriend a tri-metal engagement ring, make it myself, highly polished and a Cerakote finish (last a lifetime) thanks for video, liked it very much.

@dylanswicegood471 4 жыл бұрын

You truly do beautiful work!! Parts are gorgeous!

@darbybowen7997 4 жыл бұрын

In the first 30 seconds of the video you’ve already help me so much

@markphilipsantamaria8790 4 жыл бұрын

Nice to see some video of you again bro.more power.

@sketchyoperations9181 4 жыл бұрын

thanks for the tip on reusing the wheels, I have tons of ole ones lying around that I can now use, thanks man

@lukegulas6520 4 жыл бұрын

Those cases look amazing🙂

@ccasady1 4 жыл бұрын

What an awesome transformation on that engine 👍

@rvann1212 4 жыл бұрын

Keep em coming 🔥🔥

@haydendouglass1417 4 жыл бұрын

Love ya work buddy all those parts came out awesome! 👌🏼🤩

@CurtisTarwater 4 жыл бұрын

Really like the air cure cerakote. Appreciate the info and the instructions you have provided. Time to get my cases on the MT250 coated in bronze.

@ericbrieno4116 4 жыл бұрын

Man this engine coming out great love it cam

@erniewilson4324 4 жыл бұрын

Looking Great Cam, keep up the great videos.

@MSlaytonOIF06 4 жыл бұрын

Great video, good demonstration on why you should always tighten up your dremel bits😉👍

@dashrides2679 4 жыл бұрын

You always do such amazing work. I'm thinking about picking up a project bike for Dash's next bike, and I sure I'll be referring back to your vids quite a bit. Stay strong 💪.

@therealdjt532 4 жыл бұрын

I can tell my wife I'm not the only one who has fits of rage. Nice work on the parts, the scotch bright setup is brilliant.

@Blacksheeprc2024 4 жыл бұрын

😍 looking sick glad treatments are working for ya bro

@maffthetaff8625 4 жыл бұрын

I find it therapeutic watching ur videos mate,, only a recent subscriber but im bloody hooked,, ur awesome mate 👍

@jarunioo_426 4 жыл бұрын

beautiful work 👌with Honda project you have gone through yourself I hope that RM will come out as beautiful as honda good luck my friend✌️💪

@BTR2018 4 жыл бұрын

Quality of your work is fire🔥=) thanks for the great video:) stay blessed:)

@davidofqwerty 4 жыл бұрын

You never fail to interest and impress me, I think it's because of you the cerakote is starting to get big in uk, at one time it was only me and 1 other in uk doing it as a business, but now theres 6 or 7 doing it lol, competition is good though I guess. Good vid man keep up the good work.👍👍👍

@mxprogression 4 жыл бұрын

And when we thought things couldn’t get better,that 237 - tungsten colour is amazing,if the new Hondas 2018 onwards engine was that colour 🤤,sik job cam 🤛🏻

@j.d.7321 4 жыл бұрын

Lookin great Cam!! Love your vids

@tobiasmes3386 4 жыл бұрын

could listen to your vids all day long

@blaketurner6492 4 жыл бұрын

LMBO this is by far my favorite video. Some awesome cerokote vids with some funny parts in it. " that hole yea my printer pissed me off so I punched it."😂😂

@rowdymacd 4 жыл бұрын

Hey bud, thanks for taking the time to make these videos. Love watching the content! So much valuable info, tips and tricks. You do by far the best job on these builds I have seen to date. Keep it up 👌. I was wondering where you picked up your spray gun for the cerakote and are you currently still using it or have since upgraded. Looks like it does the trick for sure.

@maverick2242 4 жыл бұрын

Sick work Cam🤙

@CyrusFisher619 4 жыл бұрын

Amazing job!

@jaredamoroso8273 4 жыл бұрын

Great video and have been looking forward to seeing them.

@PremixandPedals 4 жыл бұрын

It is like you are building works bikes....some really great stuff going on out there!!!

@petebird7171 4 жыл бұрын

Thanks Cam, learned a lot from this, great video.

@destefano626 4 жыл бұрын

“Holy shitttttt” 😂🤙🏻

@carterbowe9964 4 жыл бұрын

That was funny!

@carterbowe9964 4 жыл бұрын

Wow that's sooooo neat!!!!!!!

@jamest5149 4 жыл бұрын

Awesome job Cameron

@mikeshem7665 4 жыл бұрын

I'm loving the look of the cerakote. 😎😎😎😎

@flyingplumber7945 4 жыл бұрын

Excellent video! Learned something there

@FEARLESS_MEMORIES 4 жыл бұрын

Love your videos bro u make it look so eazy I been wanting to buy my first dirt bike and rebuild it but I'll probably mess somthing up lol. hope all is well in health and much love from connecticut stay strong brotha

@ollylewin 4 жыл бұрын

When the bit flew out the dremel I haven't laughed that hard for a while 😁😂

@dylcar 4 жыл бұрын

Bro your videos always kill it. Keep it up.

@aitkenmikey 4 жыл бұрын

Wow, great Job brother!! Thanks for sharing, God bless you!

@teemill450 4 жыл бұрын

Looking sweet! Nice work as you always do. Get well fam.👊

@paulmessamore2440 4 жыл бұрын

This is going to be an amazing bike. My favorite dirtbike

@bryancorpuz6774 4 жыл бұрын

Hope your treatments are working will be praying for you don’t stop the amazing work you do 🤙

@CameronNiemela 4 жыл бұрын

Thank you Bryan! Much appreciated

@cbadnc9040 4 жыл бұрын

Hey Cameron, your videos are so professional. It would be cool to have a behind the scenes video to show us how you make them. Maybe like someone videotaping you while you film and then how you edit all the raw footage. Keep it up brutha!

@blaketurner6492 4 жыл бұрын

Those cases n covers are sickk

@mauritzploeg1087 4 жыл бұрын

I love watching your video’s they are very informative. I wish I could do the same as your are doing but in Switzerland there not so many dirt bikes. Keep up the great video’s..!!!!

@MrCalifornia1234 4 жыл бұрын

Looking epic! My engine cover has a nice new color on it to. I call it mud. 😝

4 жыл бұрын

Looks GREAT !

@michaeljansevanrensburg5717 4 жыл бұрын

Hi Cameron what's up..All the way from South Africa..love your videos man you got me stripping my 2007 yz 250 2 stroke obviously love the bike got stolen and recovered but bike was brutal when I got it back. Keep up with the videos keeping me busy. Regards Michael

@gtisid 4 жыл бұрын

perfect, covered everything i wanted to know.

@gtisid 4 жыл бұрын

if you were to use clearcoat on alloy rims would it. need heating up or air cure like the cases? or is the clearcoat air cure only?

@MemeRider 4 жыл бұрын

Those look so Pryme 🔥🔥🔥🤩🤩🤩

@Shinysideup 4 жыл бұрын

Nice work dude

@truvintage5800 4 жыл бұрын

New subscriber to your channel, coincidentally also restoring a 93 rm250. Plan on using some of your products for sure. Keep up the awesome vids and positivity!

@MrMatari7 4 жыл бұрын

Awesome video 👍

@TheBousouzoku 4 жыл бұрын

I just imagened opening a motor and it had clear coat and plated head bolts and other gem looking parts inside... Nice!

@hansbertz2079 4 жыл бұрын

Tremendo trabajo! Es como me gustaría reconstruir una moto.👍

@breezeofficial3372 4 жыл бұрын

Amazing job 🤘🏽🤘🏽

@gekobike 4 жыл бұрын

Grazie!!!! sei il migliore.

@gandhicap7844 4 жыл бұрын

That's actually sweet!

@bimph 4 жыл бұрын

cara é sensacional oque você faz. Parabéns

@cyrusearlrojo1128 4 жыл бұрын

Please send that bike over here in the Philippines. Loved your ideas of rebuilding that engine. Thanks

@brettholm3564 4 жыл бұрын

Nice blister bud!!! Good times in the 509!!!

@kayyakitkit9141 4 жыл бұрын

Nice job..!!👍👍

@Scarecrowe_72 4 жыл бұрын

very cool, would love to see an update on the PV after 50 or so hrs of use

@kellyhill430 3 жыл бұрын

Dude all joking aside if the police ever saw that zinc plating set up they would no doubt think you were doing something pretty shady. But enough of that kind of talk. Those bolts look freaking awsome ! I really love your attention to detail.