Construction of a MEGA sized Modern Home PT 13

Рет қаралды 257,880

22 күн бұрын

Wild Badger Mower: Amazon: amzn.to/4c9wXCw
Official website: bit.ly/3V44FCs
Amazon Sales: 15% OFF, deal price is $230.91
Start Date : 7.10 End Date：7.17
Get first dibs on our NEW Official Gear... HATS, SHIRTS, STICKERS and DRINK WEAR! Link below.
www.perkinsbuilderbrothers.co...
Buy the Tool Belt we designed and wear!
perkinsbuilderbelt.com/
Slim... Lightweight... Comfortable... Carries all the tools you need!
This video follows a construction crew as they disassemble concrete forms from a construction site. The crew faces challenges such as stuck screws, wedged panels, and intense heat as they methodically remove and organize the materials. They use various tools and techniques to pry off the panels and clean the concrete off the reusable wood pieces. The video highlights the teamwork and problem-solving skills required for this physically demanding task. Despite the difficulties, the crew remains upbeat and shares some humorous moments. Overall, the video provides an inside look at the meticulous process of dismantling a large-scale construction project.
Attention Pros!
Get your exclusive SashcoPro Sample kit now. Enhance your craftsmanship with high-performance sealants. Claim here: www.sashco.com/perkins-brothers/
Subscribe to Building Jays Way (Jason from our Crew!)
/ @building_jays_way
Get amazing deals on HARDWARE, FIXTURES and TOOLS at:
perkinsdeals.com
Get a 15% discount on ALL of the Truewerk gear we wear With their Pro Deals:
truewerk.com/pages/the-truewe...
Check out Zip System
www.huberwood.com/
Learn more about us at:
www.perkinsbuilderbrothers.com/
Learn more about the RSS and R4 screws
www.grkfasteners.com/
You can visit Bryson City and stay in a House WE BUILT! Link below (has all of Jaime's Rentals):
airbnb.com/h/plotthouse
brysoncityfarmhouses.com
#npdevices
#construction
#huberpartner

Пікірлер: 411

@PerkinsBuilderBrothers 21 күн бұрын

Wild Badger Mower: Amazon: amzn.to/4c9wXCw Official website: bit.ly/3V44FCs Amazon Sales: 15% OFF, deal price is $230.91 Start Date : 7.10 End Date：7.17

@frankpiscopo 20 күн бұрын

There's a quicker way to count parts. Weigh one, then add more until you get to the right weight.

@ramellesmith1520 20 күн бұрын

Looks like satisfying work, good job guys! Congrats on your 1 million subscribers, what an accomplishment! And thanks for allowing Arlo, your mom and me to come to the site to celebrate that accomplishment with a homemade cake, iced Cardinal coffee and balloons! Love all you guys! Great seeing the “Great Wall of Jackson” in person~

@ImConstantlyDrunk 20 күн бұрын

❤

@tdave00 20 күн бұрын

Eric, a cup wheel on a grinder will make easy work of cleaning up that concrete.

@jamespppyacek342 20 күн бұрын

Naw. He'd rather destroy his titanium hammer.

@dougtrembley9861 20 күн бұрын

50 years commercial carpenter here, did a lot of this system back in the 70's- 80"s this is a young mans job for sure, yes you do discover tricks to make it easier. best part is after you wreck all the forms and get cleaned up then look back at those beautiful walls. great job!! 68 years old just a warning this work will break your body down, so be safe and take plenty of breaks

@MrDeni3d 20 күн бұрын

Glad you boys are liking all the goodies I sent you!

@kylemcweeny878 20 күн бұрын

Not all heros wear capes. Some send knowledge. In the form of a tool

@marshallhaslett8717 20 күн бұрын

Essential Craftsman would probably say Burke Bar. I think that’s what he called it it’s a huge pry bar he always uses. I bet walking the top with that would pop em off easier. Congratulations on 1 million you guys deserve the success!

@tjkenfeld7620 18 күн бұрын

kzfaq.info/get/bejne/r6uhac2W3cvKiKs.htmlsi=_bVuP4wup9ymflPi

@nastynatetpc 20 күн бұрын

Perfect timing. Just took off my tool belt for lunch and have entertainment for the break

@2times2is4 20 күн бұрын

Get a stake puller. They are amazing. Twisting those ties with your hammer claw snaps them off. Floor scraper to clean the forms off. Long wooden wedge to drive behind the really stuck ones helps not destroy the concrete.

@jerryorrell4856 19 күн бұрын

I am retired. This is so much fun watching others work so hard. Seriously, guys, it really is a joy spending time with you. Quality builders who know how to have fun. All of your videos are a pleasure to watch. Can't wait for the next one.

@gucu 20 күн бұрын

I don't watch the channel for the building or for the jokes or for the adverts - they are very good. I love work and I can watch it all day long. Thanks for producing good content constantly.

@hedge685 20 күн бұрын

Two suggestions: 1. Burke Bar...2. Walk around jobsite magnet on wheels. Both will improve your experience by 100% ✌

@matthewstone5968 20 күн бұрын

Just want to say your videos are the best example of reality TV. I live alone and to have your videos running makes me feel part of the family. It is really enjoyable to see the team with such great work ethic, respect for each other and still have so much fun. I live in Australia and my son lives in LA so I will definitely make to trip to North Carolina to check out the scenery and get a Cardinal coffee. Keep up the great work and congratulations on the 1 million

@PerkinsBuilderBrothers 20 күн бұрын

Hey thanks Matthew!!

@TheBuilderdad 20 күн бұрын

Gloves my friends, gloves. 30-year commercial carpenter here, just wear gloves with that concrete system. Also, corner chamfer really takes it to a new level of quality. Great to see a residential project use this hand set system, its fast, accurate and really usable. Well Done gentlemen!

@Beandiptheredneck 20 күн бұрын

When I used to do construction gloves were a must doing form work, between the splinters, oil and infinite pinch points

@LimestoneCoastCustoms 20 күн бұрын

I have to agree, especially with corner chamfers. 👍👍

@richardflanigan9475 20 күн бұрын

9 years concrete Symons and Gates forming… gloves 100% agree. Concrete dries your skin out and rubs you raw. I think I mentioned chamfer in your previous video. Easy to use for grade. Also great time to grind and rub the walls. Green = Easier. Hit it with a large grinder with a cup. Knock down the seams between the panels and check grade. I think I wore the waffle head off my hammer in less than one year… Large bar + small block of 2x4 They make a stake puller 😀 super easy.

@John_Locke_108 17 күн бұрын

I was thinking the same thing but wasn't sure of builders like them have hard, leather skin. I don't any type of work around the house without gloves. But I'm a wuss.

@DrTubeman 20 күн бұрын

@Perkins Builder Brothers Congrats on the turnover to one million subscribers Perkins Crew, I admire and don't envy Jamies job and responsibilities on each new house build your certainly need exceptional organizational skills which Jamie has in Spades. I have to Tip the Fedora to Eric for his persistence in battling the KZfaq algorithm, making consistent, relevant, and entertaining content. Putting in all his extra behind the scenes work arrangement and bringing in the sponsors, organizing filming and wrapping up all the editorial work then getting a couple of reels of film out weekly to the subscribers, a heck of a lot of work just thinking abou ...on yahs, Eric. The Walls are looking smooth as yeah. All the Perkins Crew have done a awesomesauce job on putting up the concrete shutters for this mega house build. Cheers for the reel Eric.....

@itscrikey 20 күн бұрын

As you remove the screws hold a magnetic tray beneath it...

@Twinkie1960 20 күн бұрын

8:40 a tru ray-jay builder buddy moment 😂

@RayJones-PBB 20 күн бұрын

We think we’re smart, sometimes 🤣

@KilroyWasThere 20 күн бұрын

Jay faking like he got hit by a board John-O was blindly throwing over the wall made me crack up!

@Irishmayhem89 20 күн бұрын

Thanks for another video fellas. Been following before you guys even hit 100k subs. Glad to see the channel grow. Yall are great

@wernermoura7326 20 күн бұрын

Congratulations team for reaching 1 million subscribers... The long-awaited moment has arrived... the concrete was wonderful. There is a lot of work ahead, may God give you strength and health so you can continue working and providing us with great entertainment videos. A big hug to the whole team here in São Paulo - Brazil.

@ThePlockets 18 күн бұрын

Best way I know of to remove rebar stakes from the ground: A vise grip and a 3-4 foot board. Clamp the grips on the rebar parallel to the ground towards the top, and use the board as a lever against the ground to pry up on the vise grips. Takes about 5-10 seconds per stake.

@TheGreatRandom 21 күн бұрын

Jay’s cold plunge is the place to be after the pour and form pull. 😅

@BestNatureVids 20 күн бұрын

Pro tip for removing the steel form stakes: Grab the top of the stake with a large channel lock plier at a 90° angle then pull up on the stake while twisting back & forth... Jay's way works but this method is much faster although less dramatic😂

@disklamer 20 күн бұрын

visegrips even easier

@Torbox1 20 күн бұрын

Definitely need a magnetic broom for this job site haha. Concrete looks awesome.

@calebjay35 19 күн бұрын

ahh pulling steel pins, the joy of concrete work! Tip, use a pair of vise grips when pulling the pins. It allows you to twist the pin and gives you a handle to pull on! Really appreciate the content y'all produce, Thank you!

@izzaacalley 20 күн бұрын

Just in time for my lunch break

@niabhinghy 20 күн бұрын

it's stuck in dolphin mode lol

@katdimsmith7134 20 күн бұрын

You can twist a grade peg with a pipe wrench or large channel locks and pull them up most of the time

@oldcarpenter2372 20 күн бұрын

You did great as first time users! I first used modular forms back in the 1980s. There are several brands of stake pullers that will work on those round stakes, that make it a LOT easiser to pull out of the hard red dirt. I'm in NC too.

@christianpoynter7971 20 күн бұрын

So satisfying to see the forms come off! Always fun to learn something new, but I'm sure you guys were thrilled to put this stage behind you and start moving back to familiar territory too...

@tc2882 19 күн бұрын

2:58 -- When my parents' house was built, 60+ years ago, 2x12's used to form up the foundation footers were reused as joists in framing the floors. Seemed to be a common practice in NJ at the time, you can still see concrete on them.

@rhondakennedy819 19 күн бұрын

Be kind to each other. Stay safe. Love to all

@Longeno55 19 күн бұрын

Hey Jamie, the concrete around the safe room doorway came out awesome.

@carolewarner101 19 күн бұрын

Looks like you guys passed the 1 million subscribers mark. Congratulations & well earned!

@gkbuilding 20 күн бұрын

Pair of vice Grips is your best friend when it comes to pulling stakes! Just clamp on and twist and it’ll pull right up!

@cadman10000 20 күн бұрын

Pulling those forms off is so satisfying to see!

@christopherwedemeyer2993 20 күн бұрын

Taking out mass quantities of screws pro tip: get a speaker magnet and put a loop of para cord through it and hang it on your wrist that you're holding the impact with. It won't catch em all, but it will catch a lot more than hits the ground...

@jwk4567 20 күн бұрын

Wonderful. We saw the revealed concrete in a couple of ads, but it’s so satisfying to see you guys take that all off. Well, done my friends!

@awesome19611 13 күн бұрын

While wizard Arlo is enjoying his retirement all I can say is who needs Arlo when we have Jono 😊

@MrBswede 20 күн бұрын

With so many parts from the concrete forms, you could count out some quantity, weigh them and then just weigh handfuls or bucketfuls or whatever instead of counting each set. Of course that means you need a scale but. it would save a lot of counting

@kearneyfamilylondon68 20 күн бұрын

Just about to post to the same effect!

@CaptainBlueTech 20 күн бұрын

They said in an earlier video thats how the company counts them

@szymonokun9841 20 күн бұрын

The rental company counts them by weight, but I wonder how they account for the extra mass of concrete that sticks to them.

@ScottGunMag69 20 күн бұрын

Thanks I appreciate you guys sweating in the humidity. It’s been bad here in Northern Virginia.

@gailsmale7039 20 күн бұрын

So glad to see the walls taken down, seems like progress will happen now. I imagine us as well as you were thinking this house will never be built

@ikb3823 20 күн бұрын

Yall Are the best! Huge inspiration

@marigeobrien 20 күн бұрын

I bet right about the time you were doing this part, building a stone wall started to seem like a good idea, huh. LOL! Again, congrats on reaching 1 millions (+) subscribers. Woo-Hoo!

@hawaiianraider8087 20 күн бұрын

That's from working construction for over 20yrs jason is a smart man

@Bef090 19 күн бұрын

Happy 1 Million Fellers! And hi from NC!

@rkalle66 20 күн бұрын

A weelbarrow comes handy to collect all this little pieces like wedges.

@RiyaK0506 20 күн бұрын

i wish i could just roam around and gather up all that stuff and organize it!! so therapeutic!!

@HK-ul8qb 20 күн бұрын

I have been watching your builds for a while now and have enjoyed watching your projects, congratulations on your 1 million subscribers.

@johnnyrocker73 20 күн бұрын

Looking great!! Thanks for another great video.

@hector.abrach 20 күн бұрын

Our guys use a piece of rebar to clean the top of wall. Cheaper than a hammer.

@iansubashmohan634 20 күн бұрын

great job. Its always a surprise when you do the formwork reveal.great feeling when no honeycomb .

@NextLevelCraftworks 20 күн бұрын

congrats on 1 mil. you guys rock. hope to see more Arlo.

@StevenCampbell1955 20 күн бұрын

Splash a bit of Diesel fuel oil on that formwork before you pin it up as that will help it to release from the concrete. And a loop of chain ('D' link and a hand's breadth) around a crowbar will lever those steel pins straight out of the ground. Those WIDE BRIMMED HATS should be mandatory. In later years your team will have suncancers on ears , nose and neck from those fashionable backwadds caps.

@mattgilstrap7295 20 күн бұрын

Cutting some giant wedges from 4x4's that are like 2 feet long and using the persuader would help on the super tight ones.

@debraimmer260 20 күн бұрын

Always enjoy your videos, you guys are hilarious and professional. Remember to stay humble.

@keithparady2594 20 күн бұрын

They make a abrasive disc for a grinder for masonry lol

@stevenvia2452 19 күн бұрын

congrats on 1 million guys

@BigFrankieC 20 күн бұрын

For the screwheads on the forms, a piece of duct tape on them before concrete time makes them easy to remove.

@jailbreak852 4 күн бұрын

Forms looked pretty clean

@willcallcool 20 күн бұрын

You guys did a beautiful job looks great

@alvintapia4943 20 күн бұрын

Greetings from the philippines🇵🇭👏👏👏💙

@KeLPlays24 20 күн бұрын

Congrats for hitting 1 mil ❤

@raymondprohs4842 20 күн бұрын

Loved this!

@royrussell8531 17 сағат бұрын

Love all the videos, that blue Hawaiian shirt is killing me, LOL😅😅😅

@chrisschrader1499 20 күн бұрын

leaf blower and a cupping wheel on a grinder for the top of those green walls

@leonardo57 20 күн бұрын

Wow that is one big concrete wall👍👍👍👌👌

@gregory_woomer735 20 күн бұрын

Y'know out of all the build projects they've done I can guarantee this project is gonna be roughly 70 or more episodes depending on how long the Perkins Bros are willing to make each video.

@davidbruce5377 20 күн бұрын

Congrats on 1M!!

@shannondennis1021 20 күн бұрын

loving this series!

@robertmeyer1356 18 күн бұрын

Burke bars are great for stripping forms and all kinds of prying. Essential Craftsman has great videos on them. Good job fellas. Love the videos I watch them all.

@netposerx 20 күн бұрын

Jono at 15:56 was next level!!

@susansteiner6575 20 күн бұрын

Is that when the board bounced back at him and he was able to field it and send it over? Good reflexes!

@chaserood7954 20 күн бұрын

Great video! Glad to see another video

@phillipwhitley2054 20 күн бұрын

Another idea you can use band iron across the top of those wooden forms to tie your form together and you don’t have all that concrete unfinished underneath it

@timinjapan3836 20 күн бұрын

15:55 Jono, nice catch!!

@mrjones2516 20 күн бұрын

The wait inbetween episodes is killing me 😅 glad another episode is here though, cheers boys!

@ChrisK-LTC 20 күн бұрын

Jamie, if your Chevy still has the manual transfer case check to see that it didn't pop into neutral. They've been know to do that and you can't tell it by looking at the shift lever indicator.

@phillipwhitley2054 20 күн бұрын

Put a 3:04 small piece of zip tape on your screws when you tie forms together on top or any other place where Concrete’s gonna come in contact with them

@MillIronSpear 20 күн бұрын

Try Steeldog or Advanced Concrete forms next time for wall pours like this. Used them for forming basements in Colorado. We would show up at 7, strip the footers, and be pouring concrete for walls by 3pm the same day on 2,000sq ft+ houses with walkout basements and 9' walls.

@tracy.mankey4562 19 күн бұрын

Looks amazing what did you expect ❤

@djrenault 20 күн бұрын

2:09 I knew this would happen when I formed my footings for my house, so I put Tuck Tape over the screws, and left an end folded over itself to have a handle to pull up with. It all got splashed with concrete, but with a masonry hammer in one hand and pulling on the tabs with the other, it actually worked really well.

@jimmymcclelland3727 20 күн бұрын

We usually take those boards off when we pour and trowel the top of walls smooth it way easier

@MrJonnyb1234 20 күн бұрын

Take that "wonder bar" use the tear drop nail puller. Put that on the wall tie and spin. They pop off easily.

@praetoriian1625 20 күн бұрын

The greatest series on KZfaq.

@wallacewoodworks9582 20 күн бұрын

“Figuring it out right when you’re done” is exactly how it always goes 🤣

@Beandiptheredneck 20 күн бұрын

Ive actually got a gas powered wild badger weed eater. Its pretty good, its a powerful piece and was only 150$ on sale. Id never heard of them until i bought it

@mattstivers1683 20 күн бұрын

5:08 lumber mill calls them sticks. The ones that go on the bottom that the straps go around are dunage. They have a slot cut in them for the straps. The sticks also allow for the wood to dry

@ronsimpson143 20 күн бұрын

Jamie missed the opportunity to bust through the wall and yell, "Oh Yeah!"

@stuartbaker666 20 күн бұрын

Really enjoying your show guys, its fun to watch, and your all mad, crazy dudes. I'm hooked, and I learn a shit load too. Especially how not to do somethings. LOL🌏

@bradlittlefield9871 20 күн бұрын

I agree wire wheel,or masonry disk to clean the concrete.

@zachdaddychris 20 күн бұрын

Pro Tip: use a piece of rebar to smooth the top of the wall. Works great.

@tii2015 20 күн бұрын

That's a lot of work Smella's! Good job!

@CityPlannerPlaysChair 20 күн бұрын

Finally catching up to when the ads were filmed

@davevanbeers6944 20 күн бұрын

I’ve seen this video on Facebook where a lady explains when en how to use white caulk or when to use black caulk 😊really informative 😊

@darrenmarsh2290 20 күн бұрын

That was funny.

@woodturner1954 20 күн бұрын

Wood worker tools for concrete work. Hammer as chisel, proper tool usage. Oh what the hell, what ever your wearing is the right tool for the job.

@jayankumar4479 20 күн бұрын

amazing construction

@estebanespinoza5022 20 күн бұрын

21:38 Everything is a hammer… unless it’s a NICE hammer…then it’s a chisel 6:18 😂

@travisredwood9115 20 күн бұрын

For stubborn round stakes, use a pipe wrench and spin it out with a upward pull

@chainscdmc 20 күн бұрын

I predict someone will send y’all a Burke Bar after this episode. A lifesaver when striping forms.

@buildingwiththedotys8987 20 күн бұрын

If you put vice grips on those pins that won’t come out of the ground and just turn them a few times and pull up on them, guaranteed to come out of the ground