No video
PERRIN Pitch Stop Brace Install | 2015 - 2021 Subaru WRX/STI
Рет қаралды 4,491
Күн бұрынInstalling the PERRIN Pitch Stop Brace on my 2018 WRX. The OEM pitch stop brackets on the 2015-2017 WRX/STIs are prone to cracking. This pitch stop brace (not to be confused with the pitch stop mount) will help prevent it from failing. If your car has supporting mods such as the Group N Transmission Mount, Pitch Stop Mount, or any other parts that “stiffen up” the chassis, I highly suggest installing the pitch stop brace as those parts put a lot of stress on the OEM pitch stop brackets. My car is equipped with these parts so I went ahead and installed the brace to be on the safe side!
5:04 - Installation begins
9:20 - Clutch bleeding process. I made a separate video on this and you can watch it here: • How To BLEED Your Clut...
Relevant Links:
►PERRIN Pitch Stop Brace: www.perrin.com...
► SKU: PSP-DRV-112BK
► Pitch Stop Mount: www.perrin.com...
Thank you for watching! If you liked the video, please click here!: bit.ly/2KvMm8O
Check out my other Tutorials:
bit.ly/3sMJ3un
Check out my Vlogs!:
bit.ly/3cYUlWw
Business Inquiries: ronfromportland@gmail.com
Follow me on Instagram!: / ronfromportland
#PERRIN #PitchStopBrace #Subaru #WRX #STI #howto #install
@ianlominski5227 2 жыл бұрын
I plan on doing this install on my 2016 very soon and I will definitely be using this video to guide me! Love that you go into great detail, have great camera angles, and include the torque specs.
@ronfromportland 2 жыл бұрын
Hey that’s awesome man! Let me know how it goes. Thanks for checking the video out!
@ianlominski5227 2 жыл бұрын
@@ronfromportland We had a warm day in NY yesterday so I went out and got it done! Took me three hours. Your video helped so much it made the process really easy to follow and understand. Now I just need to bleed my clutch because I ran out of daylight yesterday. Thanks again!
@ronfromportland 2 жыл бұрын
@@ianlominski5227 Good to hear! I’m glad it turned out well! 🍻
@David_Saijen 8 ай бұрын
My 2016 wrx broke off my firewall 😭 wondering if it's worth trying to weld it back on, then add this on or rely the brace itself? 🤔
@SubieShakedown 3 жыл бұрын
I have always called them crows feet wrenches? Seems like a no brainer mod honestly. That would be a nightmare if that pitch stop location broke. I always enjoy your content dude, its always top notch!
@ronfromportland 3 жыл бұрын
I had a feeling there’d be other names for them! Much needed mod that I should’ve done a long time ago. Thanks so much dude!
@MoJoNinjaGarage 3 жыл бұрын
I’m going to have to pick one of these up for my car! Nice video!
@ronfromportland 3 жыл бұрын
Thank you sir! 🙏
@WRXSNOWBOARDER 3 жыл бұрын
Nice clean install. That masking tape trick has save me a few times.
@ronfromportland 3 жыл бұрын
Thanks man! Definitely does wonders!
@phsubieinjp 3 жыл бұрын
Very nice DIY job man. Gonna watch your other tutorial videos. Support from Tokyo Japan.
@ronfromportland 3 жыл бұрын
Thank you man!!!
@chriscootauco2939 3 жыл бұрын
Love these tutorials !
@ronfromportland 3 жыл бұрын
Thanks man!
@chrisdevlin4146 Жыл бұрын
Thanks for this.
@ronfromportland Жыл бұрын
Glad to help!
@rc0787 3 жыл бұрын
Great stuff! Keep it up. I like the little details you include in your videos such as the banjo bolt order, torque specs, and tips to keep the nut from falling into the engine bay. An ACTUAL walkthrough without having to cross check info and small details that add up to extra time. I appreciate it! I have a group n transmission and pitch stop, transmission bushings, weighted knob, oem short shifter, shifter slop brace and poly bushings. It still honestly shifts like poop and half the time it feels like I’m kinda forcing the shifts (daily driving shifts). I have an 18 wrx and something squeaks every time I press the clutch. Only 21k miles. Prob throw out bearing dry. I also never felt the clutch engagement was linear so I think I’m gonna get a ss clutch line next. This video will help. Did you notice any different clutch engagement with the ss clutch line? Do you know if the stock hard/rubber line has a clutch delay/restrictive valve? I’m thinking this may be part of my problem. I couldn’t find a definitive answer on forums. Thanks!
@ronfromportland 3 жыл бұрын
Thanks so much! I spend the extra time to include this information because I consider them to be the paint points that most instructions tend to miss. Thank you for noticing! That squeak is “normal” and mine has it too. I suggest putting some lube on the rubber part (I can’t remember what it’s called right now but it’s the piece near the bleeder valve that moves in and out when the clutch is engaged/disengaged). Have someone press the clutch in while you lubricate that part. The squeak disappears but it unfortunately returns over time. I’m not sure if the stock rubber line assembly has a restrictive valve but judging from the multiple angles and pieces it has, I wouldn’t be surprised. The SS clutch line made the clutch feel a little better (smoother thrust) but nothing too noticeable. I hope this helps!
@rc0787 3 жыл бұрын
@@ronfromportland thanks for the reply! I believe you are talking about the ball on the slave master cylinder (where the bleeder is connected to). I’ve been lazy to pull the TMIC but maybe soon! I’ll prob order a ss clutch line and then try lubing this. Keep up the good work and hit me up if you wanna cruise around or meet up. -Ryan(fromNEportland)
@ronfromportland 3 жыл бұрын
@@rc0787 sounds good man! Will do!
@stevegigliotti73 3 жыл бұрын
Good video bro 👍
@ronfromportland 3 жыл бұрын
Thanks bro! 🙏
@FreshlySnipes 2 жыл бұрын
Is this an issue with the 2021 STI? I just picked up a Perrin pitch stop and came across this issue.
@ronfromportland 2 жыл бұрын
Hey man. The 2018’s and up already have the reinforced pitch stop brace. I only got this brace for my 2018 WRX as a precaution. It for sure can’t hurt to have, especially with an aftermarket pitch stop.
@criaderodebettarepublicado5127 3 ай бұрын
Hello, I have some questions where I can contact you.
@tothemoon5770 Жыл бұрын
Hey man mine just snapped I have a 17wrx but I’m tuned should I call the Subaru see if they can cover it or should I weld it and get the bracket ? What are some symptoms when I take turns mine feels like shaky and making noises like I can feel the whole front move lol
@ronfromportland Жыл бұрын
Did the actual brace snap or just the pitch stop? You’ll know if it’s broken. There would be excessive vibrations.
@tothemoon5770 Жыл бұрын
The brace snapped it’s holding a lil barley but I can feel all types noises and when I do sharp turns that’s when I can feel it more but I’m thinking just Welding it and than order the Perrin brace with a Perrin pitch stop and go from there
@ronfromportland Жыл бұрын
@@tothemoon5770 there is a TSB for that pitch stop bracket. I’d let the dealer fix it and then install the pitch stop brace for a piece of mind. Check this out: api.media.atlassian.com/file/41738b59-6160-4f56-b296-562d7a8dd482/binary?token=eyJhbGciOiJIUzI1NiJ9.eyJpc3MiOiIxYTlkN2EyYy0zMjk3LTQxMzctYjU5Mi0yMzdkNzNmOTMwNjAiLCJhY2Nlc3MiOnsidXJuOmZpbGVzdG9yZTpmaWxlOjQxNzM4YjU5LTYxNjAtNGY1Ni1iMjk2LTU2MmQ3YThkZDQ4MiI6WyJyZWFkIl19LCJleHAiOjE2Nzk3MDQ1MDMsIm5iZiI6MTY3OTYyMTU4M30.8tqlpXoD7jTFmiN8fRdve3BR05kyverYyumIZ1Xa8mE&client=1a9d7a2c-3297-4137-b592-237d73f93060&name=Subaru%20TSB%2012-210-17.pdf&max-age=2940&dl=true
@fernandor887 2 жыл бұрын
Have you had any issues with the clutch after You bled the lines
@ronfromportland 2 жыл бұрын
Nope, no issues. If anything, the clutch felt better.
@honeyrattan6486 Жыл бұрын
@@ronfromportland how did you bleed the line? Thru that plastic bleeder?
@ronfromportland Жыл бұрын
@@honeyrattan6486 here’s a video of the bleeding process I made: kzfaq.info/get/bejne/aa2bnKWdyZ6of6s.html
Repair Geek
Рет қаралды 1,4 МЛН
SP3C BUILT
Рет қаралды 21 М.
ronfromportland
Рет қаралды 12 М.
Boost & Shutter
Рет қаралды 73 М.