Personalising My Wolverine MTW Billet

Рет қаралды 51,946

2 жыл бұрын

This is the latest revamp of the Wolverine MTW Billet.
I disassemble it, and take a look at the various changes made to this model.
I add a shorter outer barrel so I can insert the suppressor into the Invictus rail.
I add a shorted Lamba barrel.
I change out the Stock Wolverine Grip Line for a Filtered Grip Line.
I also add on a genuine Magpul CTR Stock.
► Main Channel: / airsoftcamman
► The Geoffs BBs I use are available from outdoorandtactical.co.uk and are available in all popular sizes. Bios are available.
International Shipping Available. Use the code: camman5 for 5% off your BBs.
►Items I use available in my Amazon store - www.amazon.co.uk/shop/airsoft...
Social Media:
► Instagram: @airsoftcamman
► FaceBook: /airsoftcamman
► Twitter: @airsoftcamman
► TiKTok: @airsoftcamman

Пікірлер: 101

@tylerwilson4450 2 жыл бұрын

A tip on placing nubs in. Flip the hop unit upside down so the nub window is facing the floor, and the arm is swinging at the ground. Put the nub directly in the teeth on the arm that hold the nub. "Swing" the arm into the upside hop unit and it's place correctly each time. Easier then tryna use a tool to correctly put the nub in the window where you THINK the arm will land.

@TheSuperyall 2 жыл бұрын

Awesome video mate. Can't wait to get mine. Really like what you did with the supressor and magpul stock! Be interested to see how it compares too the old one

@lunazwerenz5827 2 жыл бұрын

Anyone else notice how he didn’t plug the engine back into the adapter to connect to the trigger board?

@davideriksen2434 2 ай бұрын

Rumor has it It's still unplugged

@Jason-ov2ez Жыл бұрын

Thanks for the video, nice to see it's easy to take apart before I buy one.

@Manson_Airsoft 2 жыл бұрын

also a easy way to stabilize your inner barrle perfect is put very small rubber orings over the inner and press them betwen the inner and outer. you can do it after you put in back your barrle if it looks out like yours. greez from germany

@mrwickairsoft6345 Ай бұрын

Great review man really enjoyed it

@phoenixrising4573 2 жыл бұрын

If you're having trouble getting the barrel nut off the receiver, they make an armorers wrench and a plastic block the receiver goes in. You mount the received in a vice and break the nut off with the specific wrench. If it's RS spec, you chould be able to to get both for ~50$

@frahnzenberg7561 Жыл бұрын

Just ordered mine can't wait mate

@DavidBall717 2 жыл бұрын

if your running the 13ci tank on your reg with the MTW get yourself an aero stock mate, I love mine on my 10" billet with reaper engine I get 1200-1300 shots I just change it at lunch, and with all the bushes you go crawling through getting rid of the line would probably be a bonus for you I got a similar setup to yours only one size up 10" barrel with 13" rail, novritsch modular suppressor and aero stock

@BorelessAirsoft 2 жыл бұрын

Wow didn't know you have an extra channel nicely done video as always!

@xxxversoxxx 2 жыл бұрын

Hi there. I'm using mtw as well. And speaking about internal suppresor. I done little bit easy way. I didnt changed outer barrel, I just installed small extending barrel on. Tnah take suppresor a part. Use only shell and end cap- fitt on barrel and done. Its looks like inner suppresor.

@future_phonk Жыл бұрын

I love how easy this is to maintain and upgrade. Definitely picking up a forge series.

@maciejxxx4059 10 ай бұрын

do not get forge version, its made like the real one so u will get a lot of woble and loose parts in body.

@future_phonk 10 ай бұрын

@@maciejxxx4059 thanks for the insight!

@maciejxxx4059 10 ай бұрын

@@future_phonk np mate , forged is more expensive but not so good in terms of airsoft quality ( loose body compared to cheaper version). Overal MTW is beast

@HuibvanderHart 2 жыл бұрын

Set the selector switch in semi to put your line trough. Then you have more space.

@CammanExtra 2 жыл бұрын

Thanks for the tip. 👍

@yeah3960 11 ай бұрын

Legend

@jamesgrantham1743 2 жыл бұрын

Great video cant wait for my pre order to arrive! Could you please do a list for the parts used?

@wescoupland3985 Жыл бұрын

Hey if you do put plumbers tape just run a small amount halfway over the bucking and barrel just enough to wrap around once that is all you'll ever need if even needed. I see people just load the hop up and barrel instead because of wobble or what have you. Now a small brass barrel washer with a rubber o-ring solves that issues.

@ChrisLTVC Жыл бұрын

Looking forward to part two. I think that last clip with the exfil box was where I dispatched about 8 of you and got shot one of them in the dinkle lol (I did apologise) haha.

@aston4736 27 күн бұрын

With the barrel nut if its tight like mine was just smack it with a hammer to loosen.

@46templar 2 жыл бұрын

Have you brought the phoenix hop unit as im having problems getting mine to work camman?

@j.hvideo7354 17 күн бұрын

You know, now when this ”spit on that thing” is goin very popular your threatment with hop up rubber 🤣🤣🤣

@cheyz_3474 Жыл бұрын

amazing!! where did you get your mtw? plammimg to get one

@Bullets-And-Burgers 2 жыл бұрын

Could you remove the outerbarrel with the innerbarrel etc in it??? Or is it better to remove it all?

@ReMoRsEllWatson 2 жыл бұрын

What is the outer diameter of the suppressor you used, I'm trying to determine what suppressor to buy so that it will actually fit inside and be hidden by the Invictus Rail

@maxsteele20 2 жыл бұрын

Ran into issues with mine on Sunday....Groupings were all over the place. Running ZCI 6.02mm barrel with G&G Green & Flat nub. Going to try 6.01mm & Maple Leaf Silicon 60D Bucking & Omega nub this Sunday and see how it goes. If still causing issues, will try original barrel and go through each bucking again.. :)

@maxsteele20 2 жыл бұрын

Well seems to better. About 3000bbs I went through. 0.36 on semi playing on he sites DMR power lvl. Not bad at all...not many flyers, Going to try 0.28 or 0.3 as full auto next time and see how it copes. Still get a fps spike though...not very consistent in the fps. EDIT... I was also testing between games...firing a lot of rounds to bed the bucking in. I wouldn't get through 3000 bbs playing as DMR normally...maybe 2999..lol

@lunazwerenz5827 2 жыл бұрын

@@maxsteele20 yeah, the problem was probably the bucking and nub set, the maple leaf combo should be amazing, have a friend who runs it and prefers it over rhop, and it’s what I’m switching to in my p*

@Piotr_Czarnowski 2 жыл бұрын

The nub for hop unit is soft rubbery or hard plastic ?

@alanmccrum1241 2 жыл бұрын

I'm just wondering why a 6.05mm barrel..... would a 6.01 not make it more air efficient and use less pressure. Most of my upgrading barrel wise have been 6.01.

@just_bright3344 4 ай бұрын

orrange flashhider in the BIN!

@Affenkopf 10 ай бұрын

Hey which silencer and inserts do u prefer for the MTW?

@lukebarker7703 6 ай бұрын

What size is the suppressor? As im looking for one to fit inside my rail

@asraf55555 Жыл бұрын

Do you also use this setup when you play it as dmr?

@valentinozoboli4592 2 жыл бұрын

That's interesting that you got a G&G green with yours from factory. I also got a 2021 model MTW and mine came with a Maple Leaf Macaron bucking. How have you found the G&G green? I have a fresh one and I've been tempted to put it in there :)

@JasonFolk07 2 жыл бұрын

Keep the maple leaf dude. Me and my friend have messed around with them both on our setups and found ML had better consistency range and groupings over the g&g green.. hope that helps man

@valentinozoboli4592 2 жыл бұрын

@@JasonFolk07 For some reason I couldn't get a G&G green to feed anyway. I've stuck with the Maple Leaf and have had no issues outperforming other guns on the field :)

@Veritas55 2 жыл бұрын

That’s awesome I got one just a month ago and mine had a maple leaf macaron 60 degree bucking. All I did to mine was a nub and barrel swap.

@TheWizzkid67 6 ай бұрын

I do wonder how long he was sitting there wondering why it was not shooting, before he realised the engine was not plugged in.

@joeellmer1491 2 жыл бұрын

It’s my first HPA gun My came semi locked and I can’t seem to get it out of semi to full auto even tired changing the fire modes from the manual, have you or anyone else had this and knows how to change it. Much appreciated

@MegaChickenPunch Жыл бұрын

Some markets do not allow full auto. Like Germany

@LJ-fr1ze 2 жыл бұрын

What is the diameter for the silencer you used? how long is it? I really love your setup and would like to do the same for the silencer...also if you could let me know the diameter of the hand gard from wolverine.

@revengeof1307 Жыл бұрын

Idk prob 28-35 mm

@Airfonssoftballs 2 жыл бұрын

Hi there, do you (or anyone in the comments) have any tips for setting dwell on the billet?

@CammanExtra 2 жыл бұрын

Follow the recommended guide on Wolverine website.

@fsgRex 8 ай бұрын

Cant find the filtered grip lines anywhere, like wtf does MTW not make them anymore?

@kevinhunter452 Жыл бұрын

My mtw came with maple leaf macron 70

@wescoupland3985 Жыл бұрын

Also I am wondering why the g&g green bucking I personally would run a s-hop "easy" or r-hop "difficult" then a Prometheus flat purple bucking with a 6:05 will by far over shoot any setup on the market personally that's been my setup three replicas now and I have had the best consistency and groupings and with the correct joules and bb weight you can wipe the field of other players.

@Walker-gr4bj 2 ай бұрын

You ever R-hop this or just leave it with stock unit & a good bucking?

@S58c 2 жыл бұрын

Is the stock a mil spec version or a commercial version?

@kevinheine1428 2 жыл бұрын

What is a filtered grip line?

@theeasytargets_dan Жыл бұрын

Anyone know what charger I need or maybe a link to one?

@fazstar4913 2 жыл бұрын

Is that 10" outer barrel up for grabs 🙊

@johnmichaeltumpalan6207 2 жыл бұрын

What nice

@stpwadds 2 жыл бұрын

Nice vid, which suppressor did you use please

@CammanExtra 2 жыл бұрын

I use a modified Silverback Mk23 suppressor

@raob6760 8 ай бұрын

@@CammanExtraWhy You modified their supressor?

@rocken8899 2 жыл бұрын

What banana is that? Can you post a link? Great video like always!

@SupremacyDealer 2 жыл бұрын

does he like only the mtw barrels? or I can fit whatever I want?

@frahnzenberg7561 Жыл бұрын

Any

@afonsoribeiro7967 2 жыл бұрын

Hi, I'm guessing that's a 10" Mtw? What size outer and inner barrel did you get, so the suppressor stayed like that? Thanks

@CammanExtra 2 жыл бұрын

@afonsoribeiro7967 2 жыл бұрын

@@CammanExtra sorry to be a pain newbie here and don't want to fk up lol, but it's the only video that has done what I want to do... What sizer was the inner barrel I guess they are in mm? And is that grip line 5 or 10inch?

@WarAngel72 2 жыл бұрын

I bought one 🙏🏾🤗

@StantonLuke 2 жыл бұрын

‘Son of a Bitch’ made me laugh out loud!

@jhayair 2 жыл бұрын

I want one😍

@axelgautier4174 2 жыл бұрын

Hi !!! ;) Where did you buy the latest one billets ?

@CammanExtra 2 жыл бұрын

Can be bought direct from Wolverine, PowAir, High Pressure Airsoft.

@axelgautier4174 2 жыл бұрын

@@CammanExtra Thanks Camman, you convinced me to buy one ;)

@kaslab 2 жыл бұрын

noice 🔥👍

@morgan7992 Жыл бұрын

Is this the length you’re using in your ghillie videos?

@CammanExtra Жыл бұрын

Yes it is

@VernonRoach1 2 жыл бұрын

What bb weight and fps do you use ?

@CammanExtra 2 жыл бұрын

0.4g Geoffs

@Feels_Lucky 2 жыл бұрын

👍

@wesleydorchain 2 жыл бұрын

Hello What suppressor you have put onn Wess

@CammanExtra 2 жыл бұрын

Custom Silverback Mk23 Suppressor

@wesleydorchain 2 жыл бұрын

@@CammanExtra thnx

@Tim0xyz. 2 жыл бұрын

was ur stock also wobbling ? i got mine today and my G&G had a way better stock :D

@lymbo5303 2 жыл бұрын

You forgot the plug for the engine on the rear clip

@CammanExtra 2 жыл бұрын

Yeah, I know. I was scratching my head when I can to test fire it. 😂

@lymbo5303 2 жыл бұрын

@@CammanExtra I just had my first game with my forged series this Sunday just gone I am really liking it

@pdx650 Жыл бұрын

Camman, That is a damn, fine sexy-looking piece. Has the accuracy changed much after the barrel change? Is this one designated for sniping?

@MiYAGi_Airsoft Жыл бұрын

You forgot to connect the cable to the engine. 100% it didn‘t work after reassembly 😉

@ChasWG 2 жыл бұрын

I bet you has a bit of a surprise when you put an airline on and pulled the trigger and nothing happened. You forgot to reconnect the white electrical plug at the back of the engine. LOL! Looks like a nice rifle! I need to install a G&G Green bucking on my F2 MK18 build. I had it out last weekend and the bucking was having a hard time in the cold temps we had that day. High of 36 degrees F, The G&G Green is cold resistant.

@dehengli3620 2 жыл бұрын

I want to mention that too, the control board is not connected lol... which leads to the 7.4v battery not working...

@dehengli3620 2 жыл бұрын

@Camman Extra