I've had 2 different Wolverine MTWs in 3 years. I sold my first one as I was legit bored of using it and smacking everybody, and it was the longest version they had and I wanted to move down to a 10 inch carbine; get the best of both worlds in terms of range and maneuverability since I also like indoor. All I can say from my experience is that while Polarstars do indeed offer immense trigger response and fire rates, the MTWs fit perfectly in the middle in terms of performance. Why I love my MTW is that in both of my Polarstar builds I have been working on, an LMG with an F2 and an MCX with a Jack, I have had constant feeding and alignment issues where depending on the day they will work or completely not work and feed, while my MTW just works. These reviews, or more in your own words overview in general, seem to overlook how you can't just buy a pre-assembled Polarstar gun (excluding the 'custom guns' built by a third party that cost more than the MTWs by far). That's talking about the cost of purchasing a donor gun (btw to get one on the level of the MTW's metal construction is already 200+ dollars or 150+ pounds as you're in the UK) to use the body and gearbox to put the Polarstar (F2's are 400+ dollars) into, and then the work and time to put it together and align it all correctly. I've always held the same opinion about my MTW since I got my first one; They are great HPA guns where you don't have to worry about almost anything, just open the box and plug in and play. And for that reason I will always own one and recommend one to anyone looking to get into HPA. However, that doesn't mean I think they are the best rifle out there or the best HPA system, I see them somewhere in the middle; fairly good and reliable. Does what it says on the tin basically

Thanks for such a clear and thorough walk through... I'm considering one as my next RIF. Currently using a good AR15 AEG but a high quality HPA really appeals!

SOLD! to the man in the back... great informative video thanks... been airsofting since same time last year and its time for HPA! :-)

Merry Christmas and thank you!!

Mate great vid, exactly the opinion and information I was looking for! Thanks

Honestly good video . saw it pass on my suggested list and decided to look as I might go HPa . Even if I don’t go Wolverine I learned alot just on HPa alone . Keep up the good work

Such a versatile platform!

Great video, I’m looking to buy one of these now. Can you do a maintenance video to show how it is to run and full HPA setup.

Love my mtw ..its relegated most of my other pews to the cupboard.

Have you listet all the parts from your Setup somewhere? I Like the Look a Lot.

When it comes to holding the tank for me I use a old camel back. I took out the hydration and put the tank in. There’s no wiggle room for it too move and it’s comfortable

Surprised the lady allowed you to use the arena, joking aside how is it a lot of airsofters are the same, fiance rides horses got me an mtw and first thing I done was go to the yard to have a shoot :D brilliant review and great video, subscribed

I like seeing another person with the DD furniture

Thank you for the video. Have you posted a build list for this MTW

Been wanting one of these for a while now

I own every version of the mtw.... I absolutely love them all.

Dude. Awesome video. Thanks so much for posting!! What red dot/optic do you have on it??

What reg do you use? Good vid 👌 😁

I used this gun at an event, fully loaded, almost 1.5k spent on it. It was my managers. When i tell you guys this gun is worth it.. ITS WORTH IT

Nice vid, just ordered the Billet yesterday as an HPA package. No option for the green furniture you have though :(

Ive just ordered a Billet- signature build from Airsmiths and the anticipation is killing me.

Hey ! Great video mate ! Can u be kind for sharing the full build ? Thks in advance!

I am annoyed with everyone always suggesting HPA is easy to cheat with. If that is true that is totally the fault of the field you play at. Our fields simply mandate the use of a tournament lockable regulator and lock them themselves after you have chrono-ed your RIF with them. After that HPA is the most consistent system out there. I don’t see anyone testing lipo voltage before the rifs get chronod… Changing to a full battery after is much easier than meddling with a tournament locked HPA rig. Just my two cents. I use HPA and love it for its consistency. Not because it is OP… because it isn’t.

Great vid! Sorry if i missed it but what version did you go for? CQB, SBR or Carbine?

I've watched this video like 5 times. I'm getting the Billet, if it's ever back in stock!

See you are using the EPM1 madcap mags with 250 round capacity. How are they working for you? Any of the troubles people experience with the spring being too strong to load them (even with an original Odin speedloader)? Or feeding issues?

Just recently bought one and love it. Get a lot of praises on the Airsoft field. Also I’ve modified the silencer so it’s even more quieter! If it couldn’t be already. Nice video! What’s stock and silencer are you using? I can see your stock is different from mine. Love the colour too! Is that olive green? A complete list of your mods and attachments would nice to see! 👍🏼

Great looking MTW build! Can I ask what peq box and suppressor that is? If possible do you have links?

That optics combination looks really good what are they?

Nice video very helpful. One question can PCP AIRRIFLE TANK fit airsoft tank. Because I playing PCP myself.

Hey guys played around with electric recoil for a bit and although I love the extra Emerson it offers I am started to get a tad comptetitive in airsoft and want to move to HPA for fast trigger response and consistency. Is this the answer?

Incredible video! I've had my mtw for about a year and after I fixed some feeding issues, it really does outperform almost everyone on the field. And I don't know if you said it in the video but what foregrip is that? It looks sexy af

Hi! Its been a long time. I'm finally gonna buy in, however. What colour did you put on the upper receiver. And how did you do it. It looks amazing. I was just wondering because when I get the gun I wanna paint it that colour eventually. Thanks!

Is your MTW Billet the version 2 or the first generation? I was wanting to get a Forged series but there aren't any in the country (apparently for a few months still!) and from what I have heard the Forged has a better FCU for better trigger response in semi. Is the Billet good enough (given that it is the only one in stock)? Secondly, you said you have the stock barrel and hop unit, you haven't been tempted yet to install the Phoenix or Maxx hop units? Lastly, great vid, very informative and honest, I like it!

I own several HPA systems including a mtw and a inferno mk46 lmg. They are good systems, but there are several reasons I believe it's not the best of the best: -The inferno system as a whole is a hybrid bolt system, not full closed like the reaper, f2, fusion engine, or n7 systems. This makes is not as accurate and efficient as a true closed bolt system (the mtw being a purpose built rifle around the engine minimizes the disadvantages of not being closed bolt by providing perfect allignment and spacing from the hop) -The biggest complaint I had was the original fcu programming with the mtw had a trigger delay. This means no spamming the trigger like polarstar allows. -the dwell and nozzle timing are not as adjustable as the polarstar systems without using an updated fcu or gorilla fcu. -the max rof on infernos to feed has always been lower than polarstars -The mtw uses a shitty line that can break. For close to 700+ it should have a better line and it's not ment to accept amped airsoft lines -the stock mtw hop up is ok, but left alot to be desired especially in auto feeding. This is why they came out with the Phoenix hop I think it serves as a mid tier hpa gun people can buy without the headaches of alligntmet that come with installing such a system,and having to tune things like nozzles and poppets. However a true closed bolt system installed correctly will outperform the mtw in terms of accuracy, auto rof, and air efficiency. Also for cqb the mtw with stock electronics would get wrecked by all polarstar systems for trigger spamming. Theres a reason you dont see any speedqb people using infernos. Great review tho I really got your love for the systems versatility!

@pewpewpaladin Good video, will be helpful to many, Please could you advise what colour Cerakote that is and who did it for you , thanks

What Color is that Ceracote? Its just awesome😍

It took welding school to understand gauges and high pressured air are nothing against acetylene tanks and shielding gas setups for mig welders. It's literally comparing a bike pump to a high pressured air system used to fill up a giant tire.

I got 2 question what scope is this and what sort of supressor is this (look very nice and where can i buy those

Hi. Can you please tell me what is the name of the suppresser you are using in this video. Thanks

Hey just a quick question. What suppressor are you running?

Great video, I’m getting back into airsoft and I want this badly. I don’t know a single thing about HPA however, if I was to buy this rif what would I also need to buy to be able to use it straight away. Sorry I’m used to electric

It just astounds me these things cost more than a REAL, rifle!😧

@Pewpew_paladin. Nice lot of info as usual. Would have been nice to see your actual gun though instead of basically just the front half. You said it was cerakoted, didn't show it off, you said there was Daniel Defence furniture on it, didn't show it off. Please can we see more of the guns themselves please?

Why not a air stock like pcp's ?

Anyone have a link to purchase this model in the video? I’m in the US.

Hey mate, what colour is your cerakote ??

what is the name of this jacket?

Hopefully I get a response to this 🤞🤞, I just bought the forged 10” and was wondering what suppressor this is? And also the scope they looks mint, Thanks

how can i get the price information?

what size barrel did you get ?

What optic do you have on it please?

What internal upgrades have you done or recommend

I realize this is two years old and if it's already been answered I apologize, but what is the suppressor you're running here?

Hi, late question here, what suppressor are you using?

Hi,could you please tell me what colour Cerakote that is on your gun please.

Hey bro im trying to get my hands on a Wolverine MTW BILLET SBR 10. what site did you get yours from or do you know a site i can get one

How long does the bottle last, plus what's the maintenance like? Thanks

I can't find tornado grey in the cerakote shop. I wan't to use the same color because it fit's quite good to the stock. Has this color been renamed ? Does anyone know which currently offered color comes close to tornado grey?

Best mid caps to run with the weapon that feeds really well and fits snug?

Where did you get the colour ?

Bravo✊✊✊✊

Quick question? Does that thing need a battery, if so. what battery does it use??

What suppressor do you use ?

What suppressor do you have?

What suppressor is that bud?

I dont no what tho do wolverine or krytac aeg becouse hpa there is always a line tho a bottle so u cant lay your gun on the grond or whatever but hpa is mutch quied then a hpa becouse i already have a tippman botle and a buffertube becouse my airrifles

i was wondering how much bb you can shoot with a full bottle ?

What suppressor is that

what colour does the mlok and upper reciever hase ?

what is the model of this arm?

Only reason I use HPA is I can make it quiet. In the rest it was the opposite of what they told. Hard for perfect set up. So sensitive for many factor. Very expensive. 😂😂😂

MTWs just recently showed up in my country. Never knew of em till now. And so far, just shy of a 1000 American dollars, and how bland the model looks we got. Id say keep it. My 400 dollar GnG Mark18 works just fine.

you just need a good aeg and a good triggerfinger you will rip and tear this isn't for beginning players its too expencive

How many round persecond

@13:00 barrel length has little to no effect on range or accuracy im airsoft. The barrels are not rifled.....its a myth that needs to die 😂

What’s the price

I got my tank and this other part that looks like yours and I'm guessing your screw it on

the fact its hpa! its a big no for me.

What is ur Butstock called?

lol such a lil pp energy statement if u dont like them ur prob just getting shot by them