This is the kind of video I was looking for. I am new to Fiber Lasers and this video answered so many questions. Keep these coming for people like me.

@BeardedBuildsCo - Thanks. Apparently (at least according facehugger's Fiber Laser Group) these settings are "people spend a lot of time and money getting the right, 2) settings differ per machine/lens/environment" I converted your Lightburn Black mark settings to EzCad and had a black mark on brass sheet in 3 minutes. Thanks for posting your technic here for us to duplicate!

Thanks for taking the time.

Thank you for sharing. Still learning and this was helpful.

Excellent explanation on the process. Thanks for the share!!!

Fantastic. Very helpful. Looking forward to your other videos.

Very nice job of explaining the workflow.

Thank you for sharing the parameters and reasons for what they do. I also have a 100-watt mopa, but I'm a noob and it all gets pretty confusing. I will definitely try your methods. Thanks again.

Very cool. Thanks for sharing.

Great info, many thanks

So awesome! I have to get one of these.

I didn't know what angle increment was. Thanks for explaining how that works.

Thanks for sharing, just ordered a mopa and love the helpful advice

I am about to pull the trigger on a fiber laser. I really enjoyed this. Thanks.

Enjoyed your video!

Very nice!

Awesome!

Amazing you are a legend bruh❤

This was a perfect video - concise, truly informative with settings, and with some finishing tips. I have jsut purchased a JPT 100w Mopa and can't wait to give these a whirl. I may have missed it, but what lens were you using?

Hi, you use a 100W JPT Mopa M7 right? This Laser has the Option Pulse duration. You have to look into the technical Data first. There you can find the max Ratings depending of the Frequency. You can set the Q Pulse of max Power depending of the Frequency. Example: if you use a Frequency of 70kHz the max Q Pulse is 250ns. At 200kHz the max Q Pulse is 60ns at the max output Power. It means if you set the Power at 50% at 200kHz and 60ns the output Power is 50% or 50W. If you increase the Q Puls from 60 to 200ns the output Power is less than 50% or 50W. If you decrease the Q Puls from 60 to 30 the output Power is also less than your seting of 50% or 50W. The max Q Puls is 2ns at 2.960kHz. At 20kHz it is 350ns. Hope you Understand what i mean.

So many questions !! Thank You for the video! I am new to fibers Just got a Mopa 60W OMTech and the book said dont run it over 80% P whats your take on this as you have more skin in the game on your laser?

Great video! Thanks. I am new to all of this and I have several questions: 1) Does Lightburn completely replace EZCad2 (i.e. EZCad2 is deleted from system) or does it work in conjunction and 2) Love the coin idea but, just might be my lack of imagination, what exactly is the market for these? Love watching your videos! Thanks.

Fantastic video! I'm new to this, I was under the impression that "sparks" with Stainless Steel means possible rust problems...any truth to that? Would you use the same settings for Brass coins?

love your content, and the knowledge i've gained so thank you! . One question, have you tried making dies, touchmarks, punches, etc..? I'm close to buying one of these, with that being one of the goals but there is virtually no content for this

I know you sped this up, but what was the actual engrave time on the coins for both sides? Great video.

Great video - thank you. Question - is there a laser machine that you would recommend that can do a very small/precise engraving on metal. When I say small, I'm talking about some thin lines on a scale of 0.005" in thickness?

Thanks for sharing this. However, I would like to do more of a 3D coin. Do you have a video on that or any tips? I have a 60w MOPA.

This video was awesome thank you. I have a 50w OMG MOPA and am struggling with settings. How did you get so fine tuned with yours?

Great video and it also looks like this 100W laser is worth the money. Could you maybe demonstrate how well this 100W Mopa fiber laser creates a 3D coin.

Thanks. How long might the same results take on a 60W?

do you have to cover the surface with a black marker or anything so theirs so refraction back into the lens or does it not matter with a fiber laser? Just curious cause I just purchased one from cloudray waiting to be delivered. Also what focal length lens should be used for best results/fine details?

30 watt Mopa setting suggestions? I'm not having much luck with those above. Thanks.

Sir I have new usj-100w MOPA how to used and program

how do you setup lightburn so i can add multiple paths on the image like you have. I dont have the + or - buttons. Thanks for anybodys help

Wow that looks great! How long did it take to do 1 coin and is that stainless steel or aluminum that you did in this video? Thanks!

What kind of camera are you using to record your engraving footage?

Hey Man.... If you were to guess, how long would it take to burn that same images on brass at a depth of .008" - .010". Would a standard raycus source machine do the job or do you get better results with a MOPA?

Hey great video. thank you for sharing. I've got my 60W machine and a bunch of blank coins. still on the learning curve. May I ask how do you actually market those custom coins? I'm still scratching my head as to how to market such business and to whom. Any pointers is appreciated.

Hi, this is great, thank you. I didn't see you mention what lens size you are using with all your settings. Could you please share? Much appreciated!

Would this even begin to mark carbide?

I currently have a 4x8 cnc plasma table that I make a lot fire pits, signs, etc. with, but I am looking into fiber laser markers and just waiting to click the purchase button. I feel OMTech is my company of choice due to the amount of information there seems to be out there. I am definitely interested in coin and other metal products as well as pistol grip / slide engraving (example GLOCK). I will be getting either the 30w or 50w and I would like your opinion on whether the 30w would be a great starter or should I step up to the 50? I see each has the same engrave depth capabilities and I do understand that more wattage = more speed, but for starting is the 1,700 dollars more for the 50w worth the initial investment? I am by know ways cheap and always believe in big or go home like with my plasma table, though I would definitely love the 100w, I am just trying to find the best bang for the buck starting fiber marker. Your videos are very educational and definitely encourage me to enter this market. I am a Firefighter/Paramedic as well and have a ton of ideas reaching this market. Your honest opinion on which of the 2 machines I am looking at would be greatly appreciated and valued. Thank you sir.

We have the 50 watt OmTech Fiber Marker not MOPA. I am tring to engrave 14K gold. Even when I engraved stainless steel the other day, I don't get those kind of sparks or sound. I have only had this for 3 weeks. What am I doing wrong? I have watched a bunch of videos from Laser Everything. I use his settings and do not get the same results. Thank you in advance.

Where can I find out your source for these coins? I can’t find it.

I have the same machine but my problem is with cutting settings . It cuts and do soldering in the same time. The laser goes through to the other side, but it's impossible to pop out the the cut peice

Would you mind sharing what your cost is of a coin and what you get for a completed double sided one

Can a 60w MOPA do everything a 100w can... just slower? A 60w is more is a more reasonable price point for me. Thanks!