How to fit concealed (Euro-style) hinges for overlay & inset cabinet doors [video # 348]

Рет қаралды 1,037,791

Күн бұрын

In this slightly longer video I show how to measure and fit concealed (#euro-style) #hinges for overlay and #inset doors for the vast majority of DIY cabinet and wardrobe applications. Enjoy!
+++++++
Related videos:-
How many concealed hinges? - • How many concealed hin...
Kregg concealed hinge jig - • Kreg Concealed Hinge J...
Handy Gadgets for Easier installs (block scribe) - • Handy Gadgets for Easi...
How I fit Touch latches - • How I fit: Touch Latch...
+++++++
My ‘social’ links in one place - bit.ly/10minute-links
Support me directly - bit.ly/donate_to_10minuteworkshop
Support me on Patreon - / 10minuteworkshop
Full list of ‘Stuff I use’ at Full list of ‘Stuff I use’ at www.10minuteworkshop.com
Connect with me on twitter @10minuteshop
Connect with me on Instagram - @10minuteworkshop
+++++++
As an Amazon Associate, I earn from qualifying purchases made through these links.
Wherever possible links are to actual products used, but this is not always possible e.g. some products are not available in the US, so something similar has been linked to instead.
Amazon UK - www.amazon.co.uk/shop/petermi...
++++++++
Used/featured in this video:-
SBT_Design Inset hinge jig - www.theblockscribe.co.uk
Blum 71B3550 hinges - amzn.to/2oOiiYG (US: amzn.to/2oOodgt)
Blum 71B3750 (inset) hinges - amzn.to/2ZqwzP3 (US: amzn.to/2NI07AO)
Blum standard ‘cruciform’ hinge plate - 173L6100
Blum cam adjuster hinge plate - 173H7100
Hinge drilling guide - amzn.to/2oYBHqk
Self-centering drill bit - amzn.to/2pVQ6kl (US: amzn.to/2oZ7Fmq)
35mm hinge bit - amzn.to/2zAdaMc (US [similar]: amzn.to/2L8KYXw)
Bradawl - amzn.to/2qWTbln (US: amzn.to/2pZqVRm)
Festool T18 drill/driver - amzn.to/2QAHpK1 (US: amzn.to/2RPuOCR)
Festool CXS - amzn.to/2syMO8Z (US: amzn.to/2r0TZ7U)
Festool PDC 18/4 - amzn.to/2s3J0eq (US: amzn.to/2tWUHEL)
Spax screws - amzn.to/2oYWydc (US: amzn.to/2oOjkDT)
Bahco 6” combi square - amzn.to/2oumhX4 (US: amzn.to/2ouSg9k)
Kreg hinge jig - amzn.to/2zyqQr7 (US: amzn.to/2L6dvgl)
Festool MFT SP fixed clamps - amzn.to/2yAKHqi (US: amzn.to/2gQ2Neg)
Other handy stuff:-
Festool lever clamp - amzn.to/2pOohLD (US: amzn.to/2pnFZIM)
Moldex 6810 in-ear defenders - amzn.to/2sTwQJE (US:amzn.to/2sThGo1)
Hultafors Talmeter tape measure - amzn.to/2pHwnbH (US: amzn.to/2oqLQc9)
Mirok square - etsy.me/2MC0RTZ
Bessey Duo Klamp - amzn.to/2tsSWQs (US:amzn.to/2sVaRBH)
Trend Air Stealth Facemask - amzn.to/2zah0P6
Bahco 6” combi square - amzn.to/2oumhX4 (US: amzn.to/2ouSg9k)
Plastic packers - amzn.to/2vCDN27 (US:amzn.to/2vHk4fZ)
Braided hose sleeve - amzn.to/2puFkWd (US:amzn.to/2oqbQsi)
Polyvine PolyTen PVA - amzn.to/2HBxK66 (US: amzn.to/2rmHYL3)

Пікірлер: 979

@liamcallaghan9835 3 жыл бұрын

I wish every tutorial on KZfaq was as clear and well structured as this one. Great video

@10MinuteWorkshop 3 жыл бұрын

Thank you! 👍

@thysbasson1786 2 жыл бұрын

I second that, love that you don't talk lots of uneccessary nonsense like so many KZfaqrs. I tested the scribing method today from one of your other videos, thanks, it worked, my customer was happy with the results. Now I must just learn how to make the wardrobe doors close correctly, and not make "dogs ears" I think I joined the rails and stiles a bit crooked....

@johntutt7855 Жыл бұрын

Really very helpful thanks a lot explains very well thank you

@craigbyrne1441 3 жыл бұрын

Once again, I’ve learned something about something that has frustrated me over the years. Thank you.

@adriancahill1642 2 жыл бұрын

Thank you Peter Millard for taking the time to upload this tutorial as it has provided me with much information that has helped me with re-surfacing kitchen cabinets. The detail and dimension provided is very useful. This tutorial and other similar tutorials you have taken the time and trouble to post online are invaluable.

@colinlamb67 4 жыл бұрын

Hi Peter- thank you for the practical and straightforward demo and the part numbers too. I’ve made a mental note to make sure I align the inset door with the inside edge of the carcass if using the inset style hinges. Obviously your ‘deliberate mistake’ of using the marking up footage twice was to make sure we’re paying attention 😂👍

@eliehaddad4655 2 жыл бұрын

@paulschwartz6074 Жыл бұрын

Thanks very much for this video, Peter. I've been intimated by these hinges and have been avoiding them for years, but this video completely demystified them for me and I'm going to give them a go. Thank you for all your helpful information (and cheerful style).

@markbryan9989 4 жыл бұрын

I used these exact same hinges on a rebuild of my own kitchen 2 years ago. I do find that they have needed some fine adjustments after being installed for awhile. Other than that, I am happy with them. Thanks, Peter!

@robbristow 4 жыл бұрын

As others have stated. Thanks for rationalising the choices with Blum to 2 hinges and 2 mounting plates. Makes it so easy for the rest of us. Cheers.

@paulthegeek 4 жыл бұрын

Thank you for this. I need to use these kinds of hinges for the first time on a new project and had no idea what I was getting myself into. You've cleared it up, and now I know exactly what to buy and how to install them.

@10MinuteWorkshop 4 жыл бұрын

Thanks! Good to hear it’s helped! 👍

@jes1111yta 4 жыл бұрын

Perfect timing - thank you Peter! I've been trying to make sense of the Blum catalog recently - you've given me a shortcut to exactly the right item :-)

@10MinuteWorkshop 4 жыл бұрын

Glad to hear it Jeremy! There’s a hinge (and mounting plate) for every possible application, but these ones will do most of what most people want of a hinge 👍👍

@Puppygirl-hj1tn 4 жыл бұрын

My friend, I have been seeking a full video on these for some time. Just zone in on one hinge and give me a lesson. Brilliant. Thanks mate.

@10MinuteWorkshop 4 жыл бұрын

Glad it helped! And thanks! 👍

@stevewalker7822 4 жыл бұрын

I always enjoy the simplicity of your installs. You’re one of the top KZfaq channels I always watch.

@10MinuteWorkshop 4 жыл бұрын

Thank you! 👍

@wesrobinson7366 3 жыл бұрын

You are so good at educating the rest of us. Was always worried about putting in inset hinges now will give it a try.

@johnnytocino9313 3 жыл бұрын

Here in USA. Really appreciate you passing on knowledge and advice and not a lot of worthless fluff. Thanks.

@10MinuteWorkshop 3 жыл бұрын

Thank you! 👍

@jdkerk 4 жыл бұрын

This was a much needed video! When I was first learning how to install these it was hard to find a video that explained it so well.

@10MinuteWorkshop 4 жыл бұрын

Thank you! 👍👍

@pikricky 4 жыл бұрын

Absolutely brilliant video Peter,I follow you and Andy on Instagram and KZfaq all the time as you both have very informative content,this is probably the best one I've seen on concealed hinges because of the excellent detail you go into as far as measurement and adjustment of the hinges,Thank you so much for the time you take to show how easy some of the woodworking tasks can be if we just take our time and follow your instructions,keep them coming,can't wait to see your next video

@10MinuteWorkshop 4 жыл бұрын

Thanks! Good to hear they’re hitting the right tone 👍👍

@donaldhealer9954 Жыл бұрын

I'm building my first cabinet. I am a new Festool user and so far everything is going as planned. Because I am new to cabinet building, I try everything on scrap before making my cuts. I am getting ready to bore the shelf pins and hinge screw holes. I have been pulling my hair out trying to understand the process of hinge install. This short video totally simplified the process. I feel I can go straight out to the garage set the hinges... but I live in Florida and its hot, so the next cooler day will be hinge day. I have 15 cabinets to make. Great video.

@sacrajah 4 жыл бұрын

15 minutes well spent. Thank you for the information. You have given us escape route from sifting the 100 s of pages of technical specification.

@10MinuteWorkshop 4 жыл бұрын

Thanks! Yes, there's an awful lot of data to sift through! 👍

@Mammel248 Жыл бұрын

Making my own hallway cabinets as a very unhandy person. These videos are an excellent guide on getting started! Thank you so much.

@rhenzq 3 жыл бұрын

Of all the concealed hinge instructional videos I've seen, this is by far the most informative one.

@10MinuteWorkshop 3 жыл бұрын

Thank you! 👍👍

@leonardo47000 4 жыл бұрын

Peter, thanks for the straight forward lesson. I'm getting ready to build a large kitchen. I'm swift at installing but I've always needed help with setting euro-hinges. This will do it for me.

@10MinuteWorkshop 4 жыл бұрын

Thanks Leo! 👍

@keithnaidoo4242 4 жыл бұрын

This has always been abit tricky for me to get right. Thanks to you, Life just got abit easier.

@10MinuteWorkshop 4 жыл бұрын

Glad to hear it, thanks! 👍

@thomasfholland 4 жыл бұрын

Your choice to use the Blum hinges is the best.

@beaufighter245 2 жыл бұрын

At last, an easy to follow and comprehensive guide to fitting these hinges, thank you.

@sunnyboshoff1561 4 ай бұрын

Thank you so much Peter for your generous advice. It is paced enough to follow without having to endlessly rewind. Like others I have struggled with this for months trying to repair hinges on perfectly good cabinets. Mission accomplished thanks to you. Will be following your videos.

@10MinuteWorkshop 4 ай бұрын

You're very welcome, appreciate the positive comment. 👍

@iekoch1 4 жыл бұрын

when adjusting this type of hinge I find using a pozi drive screw driver better to seat into the screws.

@lancebusch8346 4 жыл бұрын

Do the door and the carcass have to be the same thickness? I'd like to put doors on a 2x4 frame.

@10MinuteWorkshop 4 жыл бұрын

No - these aren’t - but the thickness does have to be within the spec of the hinge. If you’re looking for a hinge that’ll do a full overlay on a 2” frame, then I’m pretty sure you’ll be out of luck - as always though, check the specs of the hinges you’re planning to use. 👍👍

@Randomstuff77654 2 жыл бұрын

The first 2 minutes of this video answered all of my questions and was absolute gold. Thank you

@paulhale3472 4 жыл бұрын

Your obvious practical knowledge and experience has come to the fore in this video. Thank you for providing a straight-forward installation solution to what is often for many of us a somewhat taunting process.

@10MinuteWorkshop 4 жыл бұрын

Thanks! All those hinges and hinge plates exist for a purpose, of course, but for most people, and for most doors & applications, one of the hinges shown here will do the job just fine. 👍

@piercecushenbery5876 3 жыл бұрын

This guy hinges

@ssmith954 4 жыл бұрын

An absolutely brilliant video -- thanks so much for sharing your expertise and experience, you've really helped demystify a mind-boggling selection in the catalogue. Really gives a beginner some confidence in tackling a kitchen job. Your presentation is excellent.

@10MinuteWorkshop 4 жыл бұрын

Thank you! Glad it was helpful! 👍

@ChristopherSmith-bh4sz 4 жыл бұрын

Thanks for completely de-mystifying these things Peter. In one 15 minute video you have answered a lot of questions that the average once or twice a decade installer has.

@10MinuteWorkshop 4 жыл бұрын

Thanks Christopher! To be clear, all those hinges and hinge plates in that 125 page catalogue have their use, but for most people, for most uses, the hinges I talk about here cover 90% of what 90% of people want. 👍👍

@qiujicai198 4 жыл бұрын

Thanks Peter. From your video i discovered that there are three adjustments for the hinge. Something i never knew. Now i can fix my hinges properly. Thank you.

@10MinuteWorkshop 4 жыл бұрын

Thanks! 👍

@beverleygregory 6 ай бұрын

thanks Peter , gllad I found you, nothing like a Brit for just plain down to earth straightforward explanations, A brit myself living in canada a DIY guy about to make some plywood doors for my daughters existing open cabinets for her art prints (Jennas Doodles ) Ill be looking into you other videos as I attempt to build cabinets for other projects thank you so much Bill Gregory

@salasart Жыл бұрын

I just wanted to thank you, I'm an illustrator so I don't know anything about woodworking, and your videos have taught me so much so fast is amazing, you are very concise and clear, and don't skip steps. And as a plus you also have a soothing calm voice, so you could almost classify your videos as ASMR, good quality education/entertainment.

@10MinuteWorkshop Жыл бұрын

Thank you! 🙌👍

@minik746 3 жыл бұрын

Great ! It's Sunday and after listening your amazing video, I got the tools box and adjusted all cabinets hinges. Thanks for sharing !

@10MinuteWorkshop 3 жыл бұрын

👍👍

@markphillips8554 Жыл бұрын

I was trying to figure out what hinge I needed for my current project and luckily came across your video. I figured out what I needed. Thank you. I'm ordering some of the gigs you showed.

@liammccormack7894 Жыл бұрын

This is a simple job which I am apprehensive of doing. Fitted loads of these but never on doors I have made myself. Great video, thank you!

@netfun4604 4 жыл бұрын

Peter, greetings from Oregon, USA. We had blum hinged kitchen cabinets installed 25 years ago. The upper cabinet doors are 40 inches X 21 inches, with a glass inlay. One of the doors started to not close all the way. So I ordered new hinges (didn't know of lifetime warranty until your video). I'm now going to replace the three hinges and adjust them. Glad that I found your channel. Thank you,Russ

@10MinuteWorkshop 4 жыл бұрын

Thanks Russ! And greetings from London! 👍👍

@davenottingham3254 Жыл бұрын

I’ve waited until I had a go at these before commenting but thank you so much!! I’ve never fitted cupboard doors so easily! These hinges are awesome and the little plastic jig makes them incredibly simple to fit. Thanks again!!

@10MinuteWorkshop Жыл бұрын

No problem, great to hear it helped! 👍

@markjervis8558 4 жыл бұрын

Another great programme Peter. I've just signed up to your pattern as I feel I have had such great results from your tutorials. Keep up the good work buddy....

@10MinuteWorkshop 4 жыл бұрын

Thanks Mark & welcome to the Patreon party! There’s a behind the scenes special of this video out soon for my Patreon channel 👍👍

@christaylor751 4 жыл бұрын

I now find myself staring at my kitchen cabinets and thinking mmmh time for an upgrade....great video Peter keep up the good work.

@10MinuteWorkshop 4 жыл бұрын

Thanks Chris! 👍👍

@bluehannah8696 2 жыл бұрын

Finally, a video clearly explaining this in a way that I think I can do. Thanks so much.

@TheJDWay 7 ай бұрын

Peter, i've only recently found your channel. You've been a real help to me in my campervan recently with your brilliant videos on hinges and cabinets. Just had to say thanks for your efforts mate. KZfaq at its best.👍

@10MinuteWorkshop 7 ай бұрын

Thank you! Really appreciate the feedback! 👍

@michaelkirkham8335 4 жыл бұрын

The KZfaq algorithm has me perfectly profiled. What a great channel to have discovered. The ideal presentation style Peter, thanks for putting these guides together.

@10MinuteWorkshop 4 жыл бұрын

Thanks Michael, and welcome! Lots of back-catalogue to go through too! 👍👍😆

@michaelkirkham8335 4 жыл бұрын

@@10MinuteWorkshop Absolutely, so much to keep me occupied, thanks Peter. All the best.

@rosalynfeinman7735 2 жыл бұрын

Thank you very much. I was having a little trouble attaching the hinge to the frame. You cleared it up immediately!!!!

@seanphillips7766 4 жыл бұрын

this is the best information I've found for making sense of concealed hinges. Thanks for bringing some clarity to the sea of information that is mind numbing for a newbie! And the part numbers, yeah!! I was literally about to buy the wrong hinges until I watched this.

@10MinuteWorkshop 4 жыл бұрын

Thanks! Yeah, they can be a bit of a minefield, there are so many to choose from! Glad it helped. 👍

@emmanuelraj... 4 жыл бұрын

One of the best videos I've watched under this topic. Thank you so much.

@10MinuteWorkshop 4 жыл бұрын

Thank you! 👍👍

@user-xp6ji5om7t 7 ай бұрын

This channel has such concise and useful information, one of the best on wood working I've found. Thank you for sharing your knowledge.

@michaelmiller5387 3 жыл бұрын

An old video I know but it was just what I was looking for regarding concealed hinge fitting. I am embarking on my third set of fitted wardrobes for the missus ( one for each of the three homes we have lived in) I have previously done one in sliding door and the other in Bi-fold configurations. This is a bit of a challenge for me so here goes. Very informative thank you.

@10MinuteWorkshop 3 жыл бұрын

Thanks! Glad it helped - it's one of my most popular videos, folks just seem to keep coming back to it! 👍

@Sunrayman123 2 жыл бұрын

I've needed this information for ten years. A big mystery for loads of jack-leg carpenters in Chicago!

@thegh0stwalkr 3 жыл бұрын

Thank you for making this video. I am in the process of my first project that has involved a cabinet door and this video was so well done and easy to follow.

@10MinuteWorkshop 3 жыл бұрын

Thanks! 👍

@kemchobhenchod 4 жыл бұрын

The quality of the editing in this video is extremely solid.

@10MinuteWorkshop 4 жыл бұрын

Thanks. 👍

@MissyLondon. 2 жыл бұрын

Wow thanks Peter, very informative. Never knew I needed you, until I needed you lol My two kitchen doors have now been fixed thanks to you. 🙌🏽

@10MinuteWorkshop 2 жыл бұрын

Really pleased to hear that! Thank you! 🙌👍

@Nicho2020 Жыл бұрын

Very focused, and no waffle. Excellent video!

@louiseknight4576 Жыл бұрын

Clear, concise and easy to understand. I'm a complete novice. 👍 Thank you

@MrDjkdave 3 жыл бұрын

Very informative and so well spoken. Couldn't be clearer as so many how to videos are not. It was worth watching for the narrative abilities of the author alone.

@10MinuteWorkshop 3 жыл бұрын

Thank you! 👍👍

@Bill.L.Carroll 4 жыл бұрын

That was pretty in depth, clear and precise how to. 👌 Appreciate all your efforts, mate. 👍

@10MinuteWorkshop 4 жыл бұрын

Thanks Bill! 👍👍

@mapesdhs597 2 жыл бұрын

Thankyou for this! I bought some hinges from Amazon (not Blum, but very similar), your video led me in the right direction to work out how to fit them and the right borer bit I needed (which I should receive tomorrow). I'm building a large bike lockup (roughly 2m wide, 1m deep and 1.4m high), which is a battle with both hinges and the weather. :D

@mistycat51 4 жыл бұрын

Thank you stuck on hinge adjustment seems to be fine now never get use to them 😂👍

@rogercooper9695 7 ай бұрын

Instructive, educational & enjoyable to watch. Thanks heaps.

@milZ1 3 жыл бұрын

First time DIYing. This was the video that finally made me understand hinges. Thank you 🙏

@10MinuteWorkshop 3 жыл бұрын

Haha, thanks! Glad to hear it helped! 👍👍

@10MinuteWorkshop 3 жыл бұрын

@Michael Hiers Thank you! 👍

@gordbrooks1429 3 жыл бұрын

I manage a millwork shop using mainly blum hinges for the cabinet doors, this is a great video covering all the basics, well done.

@10MinuteWorkshop 3 жыл бұрын

That's great to hear, thanks! 👍

@ds61821 3 жыл бұрын

This video and product information is very helpful. These will be my first inset doors (and drawers) I purchased inset hinges via US Amazon. Thank, and best from the US.

@10MinuteWorkshop 3 жыл бұрын

Thanks, much appreciated! And best wishes from London! 👍👍

@chillyspoon 4 жыл бұрын

Useful as always and saved to my "technique" playlist before it got as far as the jingle! - thanks

@10MinuteWorkshop 4 жыл бұрын

Haha, thanks! 👍

@jimtomlinsom1279 4 жыл бұрын

Excellent video. Thank you. I'm going to attempt this myself on the strength of this video.

@10MinuteWorkshop 4 жыл бұрын

Excellent news, and thanks! Let me know how you get on 👍👍

@nstufflebeam Жыл бұрын

Best video I have seen on Blum hinges. Thanks Very Much!!

@joburrell3737 Жыл бұрын

Thank you so much for your video re cabinet hinges. Enabled me to sort my dad's kitchen cupboard door. Jo

@rubixmania100 3 жыл бұрын

Awesome video. I just needed to reattach a hinge but learned so much more. Thank you!

@10MinuteWorkshop 3 жыл бұрын

Thank you! 👍👍

@learemington1700 3 жыл бұрын

I stumbled into your videos and glad i did. No B.S. Just good, concise information. Thankyou sooooo much.

@10MinuteWorkshop 3 жыл бұрын

Thanks, and welcome! 👍

@isoney 4 жыл бұрын

Thank you. This was very useful for me to get my wardrobe door back on.

@10MinuteWorkshop 4 жыл бұрын

Glad to hear it, thanks! 👍

@Sir_Pants_Alot 4 жыл бұрын

I just wanted to let you know I am not installing hinges now or in the near future. I’ve never built a cabinet. But somehow you just convinced me to watch a 15 minute video about hinges. Keep up the great work. Love you videos from the states.

@10MinuteWorkshop 4 жыл бұрын

Thank you! And best wishes from London. 👍👍

@pinkbsl7972 Ай бұрын

You are a natural teacher 🙂

@budj13 4 жыл бұрын

Thank you for an excellent and clear overview of concealed hinges. Very well done. 125 pages of Blum hinges explains why this is so confusing to those who don't use hinges every day.

@10MinuteWorkshop 4 жыл бұрын

Thank you! I think those 125 pages are pretty confusing for many of the guys who do use hinges every day, lol! 😂👍

@heavymetallife398 3 жыл бұрын

first 2 and a half minutes of this video made everything clear about these hinges for me, another amazing video

@10MinuteWorkshop 3 жыл бұрын

Thanks! 👍

@heavymetallife398 3 жыл бұрын

@@10MinuteWorkshop ive been binge watching your old videos mate, really enjoying them, thanx

@10MinuteWorkshop 3 жыл бұрын

Appreciate the views! Thanks! 😆👍

@Chris-op7yt Жыл бұрын

these concealed hinges are a great invention. over the years undersink door hinges can go mucky a bit, from condensation and moisture from rubbish bins installed there. i replaced mine with the soft close, they're great. the other problem often experienced on high use doors, like those for accessing rubbish bins, the hinge side eventually can wear the mounting holes larger, due to all the movement.

@ToniReviews 2 жыл бұрын

Thank you for a great video. Loved the straight forward quick intro followed by the more in depth to follow section. Loved that format. Learnt a lot thank you

@10MinuteWorkshop 2 жыл бұрын

Thanks! 👍

@msunrl8577 3 жыл бұрын

finally! walking trough a lot of unclear videos trying to figure out how to install those hinges.. thanks!! :)

@10MinuteWorkshop 3 жыл бұрын

Thanks! 👍

@dhall3401 Жыл бұрын

Just what I need. Many thanks! Great informative video as always.

@prayertool 3 жыл бұрын

Perfect timing. I had just ordered hinges for a project I am working on so I canceled that order and have ordered these exact Blum hinges, Blum measuring guide and 35mm bit. Sure appreciate your opinion (it’s more than good enough for me) and the detailed video as I plan to review again.

@10MinuteWorkshop 3 жыл бұрын

Thanks! 👍

@tedrzz 6 ай бұрын

Hey Peter! Just wanted to say thank you! I built an obnoxiously large 3 meter tall cabinet and have never mounted cabinet doors before, let alone at this scale. I was worried. I used the hinges you recommended and it came out PERFECT. Thank you so much for your videos, they are so helpful! Happy New Years and best wishes.

@10MinuteWorkshop 6 ай бұрын

Thank you! That's great to hear, and happy new year to you too! 👍 🍻

@wilmotjude 7 ай бұрын

Absolutely brilliant as usual Peter very useful info .

@ralphconnell8163 4 жыл бұрын

Very useful, thank you. These things have always been a mystery to me...Excellent.

@10MinuteWorkshop 4 жыл бұрын

Thanks! 👍👍

@brediaable 7 ай бұрын

I've been doing cabinets for years but this video was presented in a way like no other I have ever seen the visual aspect was spot on (camera man} was a true professional the explanation was that of a true teacher (professor) great video one of the best out there Thanks Peter Brett from U.S.

@10MinuteWorkshop 7 ай бұрын

Hi Brett, thank you! Really appreciate the feedback! Best wishes from London, Peter

@shirley3845 Жыл бұрын

Thanks a lot for such a informative video and being clear to the point, really helpful.

@barrymcguirk Жыл бұрын

Great video and you explain everything so well, thanks a lot.

@discoverlaurence 4 жыл бұрын

Simply explained. Great upload. Thank you.

@10MinuteWorkshop 4 жыл бұрын

Thanks! 👍👍

@rebeccahandman2650 2 жыл бұрын

Very helpful as always! Thank you so much for the education!

@NeilHutson 4 жыл бұрын

Really enjoyed the quick explanation at the start of the video!

@10MinuteWorkshop 4 жыл бұрын

Thanks! Just trying to change things up a little 👍

@markharrison1884 4 жыл бұрын

Excellent video. Clear, concise information. Thanks very much.

@10MinuteWorkshop 4 жыл бұрын

Thank you! 👍👍

@andrewatyeo9059 Жыл бұрын

Thanks for the very informative video, it helped me repair my bathroom cabinet and save money and time.

@chase3253 2 жыл бұрын

To-the-point with professionally detailed video. TY!

@10MinuteWorkshop 2 жыл бұрын

You're welcome! 👍

@stuartwilliams7903 4 жыл бұрын

Thanks peter, Just at the right time for me ,built a few wardrobe ‘s and wondering about the hinges, long time since I fitted any . So now I know. Thanks thanks again , I will join your patriot list on the back of this.

@10MinuteWorkshop 4 жыл бұрын

Thanks Stuart! Behind the scenes video out for my pattern supporters over the weekend! 👍👍

@gazzpazzer Жыл бұрын

You just answered all my questions. Excellent video.

@mrmime125 3 жыл бұрын

Great cinematography and explanation. Thank you, Peter. :)

@10MinuteWorkshop 3 жыл бұрын

Thank you! 👍

@laapulsford 4 жыл бұрын

Superb video Peter - really helped me understand how to fit these hinges 5* video.

@10MinuteWorkshop 4 жыл бұрын

Thank you! 👍👍

@derekhawley9660 Жыл бұрын

Hi Peter, I've been tasked (by Mrs H) to chop the top off a G-Plan wardrobe and make 2 bedside cabinets from the bottom, so I need to re-site the hinges. Having watched your video, I now feel more confident in fitting my first ever hinge. Thanks very much.

@10MinuteWorkshop Жыл бұрын

Thank you! 👍

@leonardnoel888 Ай бұрын

Just perfect. Thank you.

@ZenMinus 4 жыл бұрын

An excellent video as usual. The hard backed book catalogue from Blum is also a great reference, usually easier to use in the workshop than going on line :-) I'd recommend you consider looking for and purchasing a second hand Blum hinge drilling machine. The time saving in drilling the doors and the cabinet is huge! I have the extended rulers on my machine to allow for longer cabinet pieces. These machines can be "built in" to a workbench to save space etc. They are compressed air driven, this and the use of multiple stops along the ruler make the whole (hinge and mounting plate) drilling process simple, accurate and a VERY FAST procedure. :-) I have found the hinge drilling machine to be very beneficial for other precision and/or repeated drilling tasks ( - within the machine's limited range of course). Try using a depth stop (home made if necessary) on your cordless drill to speed up the hinge hole drilling process. Forty-plus years ago, I made a template from a piece of aluminium angle to use like the plastic version you have. It's easy enough to make two sizes, one for overlay (which you don't need :-) ) and the other to suit inset hinges. I don't have the details in front of me at the moment, but some of the Blum hinges contain over forty parts! Kind regards Peter Sanders :-)

@10MinuteWorkshop 4 жыл бұрын

Thanks Peter. I think you may be over-estimating the number of hinges I fit, and I do say in the video that I have a drill press pretty much dedicated to the process, so the depth thing really isn’t an issue. 👍👍