Peugeot 308 not starting. P1078 P1067 and P1015. Valve lift system faults. Fault finding and repair.

No video

Peugeot 308 not starting. P1078 P1067 and P1015. Valve lift system faults. Fault finding and repair.

Рет қаралды 158,505

Күн бұрын

Consider to support my channel and all the hard work put into it at / lmautorepairs
Thank you
Hi
This Peugeot 308 1.4 petrol (Engine 8FS), came to me from another garage as a non runner.
On the ECU, the car reported faults with the valve lift system:
P1078 - Variable valve lift motor control fault
P1067 - Variable valve lift motor control fault
P1015 - Variable valve lift system fault (Power part of the motor relay)
The above however, was not the only thing preventing the engine from starting, if was at all the above that was causing the non starting condition.
Nevertheless, follow me on this video to find out what was causing the variable valve lift problems, and why the car was not starting.
Hope you enjoy the video.
Any comments or questions, please put them below.
Like always, thank you for watching!

Пікірлер: 234

@byivan1 6 жыл бұрын

who is that one who disliked video?i dont see any problem with this exelent video-anyway this 60+ think opposite-go for it because you are the man

@LMAutoRepairs 6 жыл бұрын

ivan basic Thanks... I am not planning to stop anyway!...

@nemanjadzombic6101 5 жыл бұрын

Thank you for another great video!!! For PSA cars, factory scan tool is many time necessary. Only disadvantage is there is no graphical presentation of Parameters and there is no fuel trims. Greetings from Serbia.

@LMAutoRepairs 5 жыл бұрын

Thank you for watching and for your comment! 👍👍👍

@sionsdad 4 жыл бұрын

Excellent presentation, this video has help me massively. I have a similar problem with my daughters 1.6 VVt. This has given me good direction of what to look for. I have checked the fuse so I will now remove the rocker cover and check the motor and soleniods. Thank you.

@LMAutoRepairs 4 жыл бұрын

That's great... hope you get it sorted! Thank you for watching and for your comment!

@jacksellors1501 3 жыл бұрын

Did you find the fault in the end? I have a similar issue with my sisters car.

@jeremymougey7681 6 жыл бұрын

Great Video again ! I think I watched it twice but it makes more sense now after digging into that variable lift system. I'll bring my DS3 to Citroen next week for a chain check (noise) and will let you know the outcome... This engine just looks like mine, unfortunately Sedre does not get to find the injection drawing for my 5FS ! Keep up the good work mate ;)

@LMAutoRepairs 6 жыл бұрын

Jérémy Mougey Let's us know how it goes... Thank you for watching and for your comment!

@GREEKTEDDY 6 жыл бұрын

Hi from Greece I like petrol cars , thanks for posting

@LMAutoRepairs 6 жыл бұрын

MrT Thank you for watching and for your comment!

@jessieganaan3969 6 жыл бұрын

Well done! I like the way you discuss it easy to understand.

@LMAutoRepairs 6 жыл бұрын

jessie ganaan Good to know... Thank you for watching!

@wildforestorganics7298 Жыл бұрын

Same as any car that won't start. Check the fuses and change the spark plugs.

@LMAutoRepairs Жыл бұрын

No always.. but it is a good start... 👍👍👍

@zsoltcsaplar8054 4 жыл бұрын

Thank you so much for your year-long useful videos Merry Christmas.

@LMAutoRepairs 4 жыл бұрын

Merry Christmas! 🎄🎄🎄🎄🎄🎄🎄🎄

@proluxelectronics7419 6 жыл бұрын

Just changed timing chain and guides on a pug 207cc 1.6 thp 150 turbo (looks identical apart from turbo). Valve timing out due to missing 2 teeth on bottom sproket. Pig of a job. Hate the PUG/BMW engine. Big Thumbs Up

@LMAutoRepairs 6 жыл бұрын

Mike James This system is quite prone to fail... luckily this one was still mechanically good... Thank you for watching!

@CPUTests 5 жыл бұрын

You are testing the intake valve system. You should test the EXAUST side like your scanner says.

@LMAutoRepairs 5 жыл бұрын

Hi You surely haven't watched the video all the way... or you have skipped it... Thank you for watching!

@MestreVintage 6 жыл бұрын

Parabéns pelos vídeos, muito bacana seu trabalho, continue assim sempre.

@LMAutoRepairs 6 жыл бұрын

William Simberg Obrigado!

@MechanicTechnicianRepair 6 жыл бұрын

Exselecte diagnostic amigo. Nice. Video

@LMAutoRepairs 6 жыл бұрын

Mechanic Technician Repair Thank you!

@99rattle 6 жыл бұрын

hi, Nice video, the variable motor gives very hard start also, had the same 308 issue myself , but I only go as fuses & check motor powers & ground , unless guys are going to pay to check wiring to the ecu. My customers cry about paying for in depth stuff like you do. :(

@LMAutoRepairs 6 жыл бұрын

Lee Rattle They do, don't they? Sometimes I don't really understand what they expect... Anyway, thank you for watching and for your comment!

@99rattle 6 жыл бұрын

Sry to say but as i was watching video, & you 1st dismissed the fuse for being to themotor , I had a lil chuckle to myself, cus that is exactly the issue i had. But luckly for me I found the blown fuse & rechecked it :) , even tho no reference to the motor. :(

@LMAutoRepairs 6 жыл бұрын

Lee Rattle 👍

@ALImohammed-jd1xe 6 жыл бұрын

Very good job, thanks again for sharing such an interesting video.

@LMAutoRepairs 6 жыл бұрын

ALI mohammed Thank you for watching!

@patryko85 5 жыл бұрын

How you have helped me so many times thank you. I am stuck with this one though. 2010 pug 207 1.6 petrol 5FS with really random codes p0522, P15a8, P023A and a strange one U1308. Oil press sensor checked, I feel defeated.. I am getting "battery charge status unit" error code but cannot access it..

@LMAutoRepairs 5 жыл бұрын

Hi It looks to me that there is one problem causing all those issues... Check BSM for water ingress... check ABS plug, wiring, earth points etc.... Thank you for watching and for your comment!

@hddm3 5 жыл бұрын

Is that a man on the steering wheel walking in the dark because the car broke down again? Hahahahahahhah

@LMAutoRepairs 5 жыл бұрын

🤣🤣🤣🤣🤣 Nice one... Thank you for watching!

@88camaroman 5 жыл бұрын

Man I love turning wrenches, but wish I had your skill set behind the computer

@LMAutoRepairs 5 жыл бұрын

😊 It is a learning process... Thank you for watching and for your comment!

@mehismaar5941 3 жыл бұрын

Hello. Is it possible to make the Peugeot 308 sw 2010 Euro 4 show when to change gear?

@kamill8875 3 жыл бұрын

hello please help. unfortunately I don't know English and I don't understand what you are talking about in your movie. I have a peugeot 3008 1.6 vti and I have the same errors. How did you fix it? greetings

@raymondferguson1935 6 жыл бұрын

👍👍very good keep up the good work

@LMAutoRepairs 6 жыл бұрын

Thank you for watching!

@smorke2 2 жыл бұрын

I have a Peugeot 308 5FW engine ,it's has smoke coming from the top of the tappet cover...what could be wrong?

@chikhbachir3663 6 жыл бұрын

beautiful work you're good

@LMAutoRepairs 6 жыл бұрын

chikh bachir Thank you for watching and for your comment!

@armandodiana9850 Жыл бұрын

I c3 vti 1.6 DTC P1067 - P1050 - P1015 . Is problme motor valvetronic ? Or ecu engine ?

@erginunal3590 5 жыл бұрын

HELLO THERE. PEUGEOT 308 VTI ENGINE. P1015 AND P1062 FAULT. WHAT SHOULD I DO.

@LMAutoRepairs 5 жыл бұрын

Check the variable valve system... Motor, position sensor, etc... Thank you for watching and for your comment!

@projektaielektrotechnika3654 5 жыл бұрын

Hello. Maybe you could say whats wrong with opel zafira B 1.8 petrol. 2007 y. Turnings does not turns off automaticaly. Is it possible that it is bad steering wheel rotation sensor ? if that possible, can try to replace it from other car ?

@keithsnyman2923 3 жыл бұрын

My 308 has the exact fault codes and new plugs and bridging the batery fuses did not solve the problem, it still stugels to start and when it does it just stals at random

@mickymadueno6594 6 жыл бұрын

Buen video saludos desde España

@LMAutoRepairs 6 жыл бұрын

Micky madueño 👍 Gracias...

@thejoneseys 6 жыл бұрын

Great work again! Liked that you took the rocker cover off so could see how it actually works inside. I'm guessing those plugs haven't been changed in a while but the head looked really clean so the oil or car hasn't been badly neglected. Pretty poor someone broke that electrical connector, it's not like you can get replacements very easily :( Also interesting the other "alternative" fuses used on that car. I've never seen those before! Thanks again for sharing, Really admire your patience and thoroughness!

@LMAutoRepairs 6 жыл бұрын

thejoneseys Hi Thank you so much for watching and for all the points you made... 👍

@ThatVoxelBlock Жыл бұрын

i think there called maxi fuses

@chrismulder7093 4 жыл бұрын

Hi Sir Thank you for all your nice video and research. I am from Holland. And I have a problem with cold start 1.6 vti engine peugeot 3008 120 ps. It is rough idling for 30/40 seconds. After 2 seconds being at 900 rpm it is ging to 1200 rpm and than slowly going to 900 rpm. So at this time it is idling rough with I think some misfire for at least 30 seconds. And after 30/40 seconds it is running excellent. The whole day I have no problems with starting the car. And this problem is happening every morning. Do I have to reset adaptations valvetronic unit.????? I don't get error codes or emission light on. Or is it the viscosity of the oil. I use full synthetic 10W-60 because this type of engines like oil consumption. Thanks Chris

@jordan28803 2 жыл бұрын

Good job. What software do you use.... Grest video man

@LMAutoRepairs 2 жыл бұрын

Here I was using diagbox... along with sedre... if I recall correctly! 👍👍👍

@colinlyne1660 6 жыл бұрын

as usual for me a fantastic video. brilliant explanation. I wonder if you could advise on the peugeot new interface I too have one about 8 yrs old but had a lot of trouble with the softwear. many thanks colin

@LMAutoRepairs 6 жыл бұрын

colin Lyne Thanks Colin! I have only used Diagbox a couple of times... I have used Lexia and PP2000 for many years... I must to say, that I never really had major issues with those... Diagbox seems ok, but I think I need a bit more hours of experience with it before start to comment... Thank you for watching!

@renatairmarius123 4 жыл бұрын

Thanks

@LMAutoRepairs 4 жыл бұрын

Thank you for watching! 👍👍👍

@Hendroit 3 жыл бұрын

Nice video! I will get the same model tomorrow with the same fault code to diagnose. I see this video is from 2 years ago, right now the maxisys does recognize these fault codes and gives the correct discription. What software did you use on the laptop? Is that original peugeot software? I despirately need wiring diagrams for peugeot citroen etc. Hard to find on the interwebz

@LMAutoRepairs 3 жыл бұрын

Hi Don't know if Autel updated their dtc description in the mean time... On the laptop I'm running Diagbox for diagnostics, and Sedre for diagrams... Thank you for watching and for your comment!

@keithsnyman2923 3 жыл бұрын

@@LMAutoRepairs I have the exact same fault codes but but after fitting new plugs and bridging the fuse on the battery it's till not fixed

@SuperZubby 5 жыл бұрын

Hi I've got a 406 petrol ew10 that starts high idles then dies. Got p0341 code

@LMAutoRepairs 5 жыл бұрын

Hi That code seems to point to an issue with the camshaft sensor... Thank you for watching!

@finrazielband 3 ай бұрын

Hi there, we have a 2011 Peugeot 207 cc in limp mode with a p1067 and p1030, occasionally we get the p1078 and p1025 and p1015 codes. We are sure the fault we have is with the Valve lift. Is the 70 amp midi fuse on top the battery to do with the variable valve lift? Have ordered the fuse and hoping that solves our issue. Is it worth replacing the solenoids and vv motor if the fuse doesn't work. What set up do you have to test the solenoids and motor etc? My obd is very basic and I think I need to take the car to someone with your set up. Any help would be greatly appreciated

@LMAutoRepairs 3 ай бұрын

Is the fuse blown? I don't recall now without checking which fuse is for what... unless I have mentioned it in the video... I would have it properly diagnosed before continuing to throw parts at it... as you can end up with an unnecessary expensive bill, and worse, still have the same issue...

@globalcarparts4209 6 жыл бұрын

Good video

@LMAutoRepairs 6 жыл бұрын

Global Car Parts Thank you for watching!

@abdelhalimbahi5768 5 жыл бұрын

thank you

@LMAutoRepairs 5 жыл бұрын

Thank you for watching and for your comment! 👍

@mmaswimokalapa9126 4 жыл бұрын

LM Auto Repairs can you halp me?

@LMAutoRepairs 4 жыл бұрын

Have you scanned the car?

@MegaRusty64 3 жыл бұрын

Fantastic tutorial.... I don’t have a computer for diagnostics but I did this test as I believed the lifter motor was stuck. I connected my test wires exactly as seen in the video and the motor moved... switched wires over and it moved back again... I thought I would try it one more time but this time there was a tiny spark at the ecu plug when connecting the probes and now the lifter motor won’t move anymore, have I blown the relay or a fuse ??? Timing chain had just been done but the car would not Rev past 1500 rpm, now it won’t start at all 🤔 any help on the fuse or relay or what I need to do to now to fix what I’ve blown 👍

@LMAutoRepairs 3 жыл бұрын

How exactly have you tested the motor? You have not put any voltage into the ecu, or have you?

@MegaRusty64 3 жыл бұрын

I connected my probe wires exactly as you have done in your video, the motor rocked one way, I then reversed the probes and it rocked back the other way, I tried it one more time and there was a tiny spark at the probe and the actuator wouldn’t work again... so I’m guessing I’ve blown a fuse maybe ?? If I have blown a fuse then I’m unsure which one and where to find it ?? Thank you for your reply 👍

@LMAutoRepairs 3 жыл бұрын

If you did it the exact same way as I did, and your car is the exact same as the one on the video, as you have seen the motor connects straight to the ecu... So, unless your motor somehow has shorted and when you plugged everything back it burned some fuses or your electrical system is different and something else happened... It is difficult to say... All the fuses are on that box in the engine, and inside by the glove box on the BSI... Check everything!

@MegaRusty64 3 жыл бұрын

@@LMAutoRepairs the car is identical to the car in your video 2008 Peugeot 308 1.4s. Thank you, I will check all the fuses and hopefully find the fault 🙏 👍👍👍

@LMAutoRepairs 3 жыл бұрын

🤞

@fm-jb1gq 3 жыл бұрын

hi lm really informative video, i have a citroen similar fault codes, similar problem not starting, the relay is stuck as yours was and if i power the circuit like you did it comes on, is the relay fuse box needs replacing or the bsi is not sending the signal to the relay to close and come out of sleep mode and power on car, thanks again for the video

@LMAutoRepairs 3 жыл бұрын

You need to measure it... see where the signal comes from... without looking at diagrams it is difficult to tell... Thank you for watching and for your comment!

@fm-jb1gq 3 жыл бұрын

@@LMAutoRepairs thanks for the repy

@paulmayou370 6 жыл бұрын

great work mate all for a fuse lol

@LMAutoRepairs 6 жыл бұрын

Paul Mayou Lol... indeed... Thank you for watching!

@DrivingPOVz 5 жыл бұрын

Hi Luis, You have replaced the fuse but what was the reason the fuse was burnt?

@LMAutoRepairs 5 жыл бұрын

Pass... maybe something done before the car came to me... Unfortunately I don't always get the full story...🤦‍♂️ 👍

@xxlcosti5271 Жыл бұрын

I bought the car with the eccentric sensor plug reversed! Is it possible to have destroyed ecu? The car starts cold, but when it warms up, if I turn off the engine, it starts and stops by itself! If I accelerate the engine when I start it, it does not stop, it remains at idle but a little under-revving, and if I remove the plug from the eccentric sensor, the engine works perfectly. Please can you help me?

@LMAutoRepairs Жыл бұрын

Check time, and check that the signal coming out from the sensor is correct... 👍👍👍

@xxlcosti5271 Жыл бұрын

@@LMAutoRepairs I checked the wires and none of them are interrupted or shorted between them. If I remove the plug from the eccentric sensor and start the engine it works perfectly and if I stop it and start it again with the plug it still works perfectly and one more thing if I do the valvetronic tester test and start the engine it works perfectly and if I stop it and start it again it starts again it stops by itself! On the tester I have error code p2178 to rich mixture! Can you help me too, I'm from Stoke-on-Trent please for a fee of course?

@tecnaman9097 6 жыл бұрын

Excellent diag. Did you do any testing to see what caused the fuse to blow?Cheers

@LMAutoRepairs 6 жыл бұрын

tecnaman Hi I checked everything around... but couldn't find anything... Someone has been there before me... so you never know... Thank you for watching!

@liamcu9823 4 жыл бұрын

Great video! I see you used your laptop to reset the auto adaptions but Is the Autel scanner capable of doing this somewhere in its special functions? I know the Autel is able to do the relearn for the throttle body which has a similar procedure. Thanks in advance!

@LMAutoRepairs 4 жыл бұрын

Yes, I believe Autel also does it... Thank you for watching!

@nejamuddinnejam7285 2 жыл бұрын

আসসালামুআলাইকুম ভাই আমার ইঞ্জিনটা হেড খোলার পরে হেড সেটিং করা হয়েছে পরে আর স্টার্ট হচ্ছে না এখন আমি কি করতে পারি আমার একটু ভালো করে বুঝিয়ে বললে আমি উপকৃত হব

@mmaswimokalapa9126 4 жыл бұрын

My Peugeot is not starting

@przemekfryc5495 2 ай бұрын

Really great work again!😃 could you tell me mate,did you have this Diagbox/ Lexia online or offline software? I was going to get Diagbox 9.129 with the newest software included Lexia and Ds model. Can you program or coding??

@LMAutoRepairs 2 ай бұрын

Offline... I believe the more recent ones for programming and coding need to go online... 👍👍👍

@przemekfryc5495 2 ай бұрын

@@LMAutoRepairs so did you recommend this Diagbox? Because I’m just wondering if it’s more powerful than Autel and help you better diagnosis? Or is same like Autel with all functions we have?

@LMAutoRepairs 2 ай бұрын

@przemekfryc5495 You can't really compare... Diagbox will only do peugeot and Citroën... Autel will do many other cars... If you need a tool just for Peugeot or Citroën, Diagbox is a good choice, if you ever need to scan other cars, the the Autel or other similar tool...

@przemekfryc5495 2 ай бұрын

@@LMAutoRepairs Yes absolutely understand. I have 2 autel and other computers for diagnostic but I was gonna ask if Diagbox is much better software to compare Autel Software for Peugeot and Citroen? Or does it have more options diagbox??

@LMAutoRepairs 2 ай бұрын

@przemekfryc5495 Diagbox will have more options, but some will require online access to a PSA account... Will also give you some extra info that Autel does not, like expected parameters on live data etc...

@prabhartkardamadarsing3136 5 жыл бұрын

hi,nice video..can u please tell me if possible to program peugeot 308cc 1.6thp bsi with autel maxisys ms908p thankyou

@LMAutoRepairs 5 жыл бұрын

Hi If when you say programming, you mean flash a new software, no, it can't... If you mean code or program a blank BSI, it can, but... I never tried it... The option is there... so should work... Thank you for watching and for your comment!

@markcookson3519 3 жыл бұрын

i am trying to get circuit diagram but not having much luck what is best program for this any help apricated

@LMAutoRepairs 3 жыл бұрын

Peugeot, look for sedre.... Thank you for watching!

@ilyas_dz 8 ай бұрын

How i can find diagramme véhicule 207 vti

@LMAutoRepairs 8 ай бұрын

Sedre... for example... 👍👍👍

@kalbi777 2 жыл бұрын

Curious about where you get all those testers

@LMAutoRepairs 2 жыл бұрын

💸💸💸💸 ☺

@zavidmohamed5078 3 жыл бұрын

Hi, Thanks for your videos on car repairs. They are very informative and interesting. I have a peugeot 308 1.4 vti 2009. I have been having starting issue for the past 3 months now. Engine crank but do not start. It seems that the injector valves do not open. I tried to change ecu by transferring data from ecu to a different ecu. That didn't solve the problem but gave me some fault code at least. The code was P0014, indicating issue with camshaft. Therefore I have changed the timing chain set and still no joy not starting. There is spark but it feels that fuel is not reaching the chamber. Could you please help / guide me to find the problem.. Thanks, Zavid

@LMAutoRepairs 3 жыл бұрын

Hi The camshaft alone should not prevent the engine from starting... You have something else... Check live data... Thank you for watching and for your comment!

@zavidmohamed5078 3 жыл бұрын

@@LMAutoRepairs Hi, Thanks for your reply. I tried my best but can't get it started. If you are happy to have a look and we are not really far of each other I am happy to bring it to you the Car. I really want to understand what is stopping this car from starting.

@hazriyahhghayajh8466 5 жыл бұрын

Hi sir...nice video and explanations... My 308vti got issue with fault code p1056 power supply to vv lift motor short to earth ...tia if you could help...

@LMAutoRepairs 5 жыл бұрын

Just follow the wires back to the BSM... Could be a bad motor as well... test it... Thank you for watching and for your comment!

@chrisnwa 6 жыл бұрын

HI Mate, Thanks for the good video as always. very precised and informative. I have a question. I have a friend that has the exact same model of car, the problem is, when my friend starts the car, the radiator fan turns on automatically without no one turning on something, Can you guide on which step to take ? Thanks in Advance

@LMAutoRepairs 6 жыл бұрын

Christian U Nwaebe Hi Thank you for watching! Have you scanned the car? Look at the live data and watch the coolant temperature... It sounds like the ecu is not seeing a reading....

@chrisnwa 6 жыл бұрын

Thanks for the response. i have scanned the car but no error. I will scan the car and look at the live Data. Do you have any specific range i should be looking at from the temp sensor?

@LMAutoRepairs 6 жыл бұрын

Christian U Nwaebe The range will be the engine coolant temperature... So engine fully warmed up 90°c...

@nejamuddinnejam7285 2 жыл бұрын

Brother, the head of my engine has been opened. After setting the head, it is not starting anymore. Help me a little. Now I can't work as a mechanic. I can't. Please help me.

@carlosbmwe38 4 жыл бұрын

Hi dear I'm having a trouble with my 308 petrol and the problem is I turn on the car, all works fine, but when the car reach the temperature to activate the fan, the car turn on check engine light, works on 3 cylinder and Lexia say misfire cylinder 1. If I unplug some sensor(camshaft exhaust sensor or solenoide for exhaust camshaft) the car runs perfect but with check engine on. That's the only error related with malfunction and another about thermostat What I can check?( I change lambdas, injector, spark, bobine, camshaft sensor)

@LMAutoRepairs 4 жыл бұрын

Check wiring... Thank you for watching!

@carlosbmwe38 4 жыл бұрын

@@LMAutoRepairs can you share to me wiring diagrams? I have been reading and some people says that the map sensor is the culprit. What do you think? Any other sensor produce DTC code:(

@josephfitzgerald315 5 жыл бұрын

I have the same car at the moment with similar symptoms so I just checked compression in all the cylinders and all but one had full compression would the variable valve timing cause something like a valve not to close to allow compression to build up?

@saabsa 2 жыл бұрын

The motor will lift all inlet valve together not individually you probably have cracked valve

@tonypond8196 6 жыл бұрын

hi nice job as always ! could you please tell me what peugeot diagnostic equipment you used in the video please ? best regards . tony

@LMAutoRepairs 3 жыл бұрын

Diagbox... Thank you for watching!

@juweekhan 6 жыл бұрын

Good video but why was the fuse blown !

@LMAutoRepairs 6 жыл бұрын

juwee khan Thank you... As I have already said, not really sure, I have checked wiring and everything around, and could not find anything... Someone has been working on the car before me, so you never know... Thank you for watching!

@gharbimecatronicien576 5 жыл бұрын

Hi Mr, i need your help, how can i install new variable valve motor ???

@LMAutoRepairs 5 жыл бұрын

Hi kzfaq.info/get/bejne/a7CcktOgq5mZj3U.html Myself or a fellow member will be happy to help! Thank you for watching!

@soufianattar4554 6 жыл бұрын

Great video, What software you use to get, rhe wiring diagrams ?

@LMAutoRepairs 6 жыл бұрын

Soufian Attar Thanks... Sedre...

@idmelectrical2569 6 жыл бұрын

Great video, thanks for posting. Is it possible to reset the auto adaptations with other software and interface such as autocom?

@LMAutoRepairs 6 жыл бұрын

Idm Electrical Hi I never worked with that tool... but probably it is possible... Thank you for watching!

@nemanjadzombic6101 5 жыл бұрын

Yes, it is posible.

@poul-erikjensen508 3 жыл бұрын

Great !

@LMAutoRepairs 3 жыл бұрын

😊 Thanks! 👍👍👍

@user-bo1eq6mi9g 11 ай бұрын

Modelini sebenarnya tidak perlu dibina sering ada permasalahan gejala yang berperingkat tidak selesai...inovasi pintar sahaja boleh selesaikan permasalahan peugeot model ini

@ChupaCabras1972 4 жыл бұрын

Boas, já tinhas visto alguns vídeos seus, pensei que fosse espanhol, mas a tua filha denunciou te. Por acaso não moras perto de Newcastle? Continuação de bom trabalho. 👍

@LMAutoRepairs 4 жыл бұрын

Boas! Não, moro bastante longe... Obrigado to ver os videos... 👍👍👍

@dlugas251 6 жыл бұрын

You should really have power probe in your tool set. It's brilliant tool for checking fuses and energizing solenoids or motors.

@LMAutoRepairs 6 жыл бұрын

dlugas251 Hi I know... is in my shopping list... it is a bit on money for now... Thank you for watching!

@dlugas251 6 жыл бұрын

LM Auto Repairs I have original power probe 3 which is quite expensive, but I found equivalent for 52gbp (less than half the power probe price) with bigger and much nicer screen and more functions. The only question is: how is the quality. It may be worth to consider buing that, but I don't know.

@LMAutoRepairs 6 жыл бұрын

dlugas251 That's the thing... you usually get what you paid for... I have the ETC2000 which appreciate the build quality etc... I just don't want to spend £50, to then regret not have spent a bit more and the the right tool first time... But I appreciate your help! 👍

@sadikmamoun2847 6 жыл бұрын

good job mate i have a case of a petrol 207 peugeot no start case it through the p0341 i have changed the sensor nothing changed coils nothing happens no sparks at all change the whole immo system the same problen the same code any ideas

@LMAutoRepairs 6 жыл бұрын

sadik mamoun BSM ? Have you checked wiring? I have a video ready to be published that you will find interesting... was a similar problem.. stay tuned...

@sadikmamoun2847 6 жыл бұрын

i will be looking foraward to see the video

@LMAutoRepairs 6 жыл бұрын

sadik mamoun 😉👍

@mourinhoMNE Жыл бұрын

P1023 P1694 P1025

@erginunal3590 4 жыл бұрын

hi. my 308 vti. 1.6 petrol. fault code: p1015-p1067-p1062 P0443 Car engine fan work continuously. Is the engine fan operation normal? engine fan checked. no problem. fan role-heat sensor- thermostat no problem. p1015-p1067-p1062-P0443 fault code, engine fan Reason for work?

@LMAutoRepairs 4 жыл бұрын

None of those codes shouldn't make the fan to continuously run... But you never know... it is a French car... Check live data... coolant temp etc... check that is not a stick/welded relay... Thank you for watching!

@erginunal3590 4 жыл бұрын

@@LMAutoRepairs thank. another question . engine off fan off. engine start fan start. omn: 6545xf fan insurance. fan continues to operate when disconnected . short circuit or brain malfunction ?

@khaledyounes3157 5 жыл бұрын

Hei, Can you help with how to change ABS FUEL RELAY FUSE

@LMAutoRepairs 5 жыл бұрын

Confused... ABS fuel relay fuse?

@YuonsKhaled 5 жыл бұрын

@@LMAutoRepairs this one www.aliexpress.com/item/32843739738.html?spm=2114.12057483.0.0.5752598cQKlu1i

@YuonsKhaled 5 жыл бұрын

this one is the ABS Fuse That power up ABS Pumpe

@bodgitandleggitgarage 6 жыл бұрын

17:16 sorted!!!😁😁😁

@LMAutoRepairs 6 жыл бұрын

bodgit and leggit garage Indeed... you have been an influence... lol Thank you for watching!

@bodgitandleggitgarage 6 жыл бұрын

lmsvvavr thanks a lot mate much appreciated always enjoy your videos too

@LMAutoRepairs 6 жыл бұрын

bodgit and leggit garage 👍

@thecarpfather5757 2 жыл бұрын

Is the snap on solus legend capable of this

@LMAutoRepairs 2 жыл бұрын

Possibly... I never used one... Thank you for watching!

@thecarpfather5757 2 жыл бұрын

@@LMAutoRepairs it does my friend that's made my job a lot less expensive well not considering I've paid for the machine but as you know there an investment thanks for your time

@LMAutoRepairs 2 жыл бұрын

I thought it was a question...😊

@nejamuddinnejam7285 2 жыл бұрын

Brother, the head of my engine has been opened and fixed. Now the engine is not starting. What can I do now? The mechanic has tried a lot. He has seen everything in the computer system.

@LMAutoRepairs 2 жыл бұрын

Something has been missed... check timing to start with... make sure everything is plugged in correctly... 👍👍👍

@sameerwarrich26 5 жыл бұрын

Hello , sir i have peugeot 308 2008 fault code p0341 inlet cylinder reference sensor signal Coherence and anti pollution fault. I have replace camshaft sensor spark plugs and crankshaft sensor but still fault appear as permanent. I have checked timing its ok. I jave cleaned solenoid valve and tested its working open and close normally. What should i do kindly advice. Many thanks regards

@LMAutoRepairs 5 жыл бұрын

Have you checked wiring back to the ecu? Thank you for watching and for your comment!

@sameerwarrich26 5 жыл бұрын

@@LMAutoRepairs sir i have checked 5v reference 12v and ground on crankshaft and camshaft sensors. If i erase the fault it comes back and shows as permanent fault.

@LMAutoRepairs 5 жыл бұрын

@@sameerwarrich26 Check that there is no teeth missing or damage... a scope can be handy in that situation...

@sameerwarrich26 5 жыл бұрын

@@LMAutoRepairs thanks for your help. I will check that

@gharbimecatronicien576 6 жыл бұрын

Hi Mr, I have a Peugeot 207 1.6 VTI it doesn't start and i have this current code p1025 related to valve lift, can you help me please

@LMAutoRepairs 6 жыл бұрын

Remove the cover and inspect... Can you actuate the motor, and hear it running? Thank you for watching!

@mourinhoMNE Жыл бұрын

Hello, i have same problem with, peugeot 207 vti 1.4, i cant start engine after test compresion, compresion is goood (11)... Can u give me mail or answer here, tnx a lot.

@LMAutoRepairs Жыл бұрын

Hi Any codes? Have you looked at live data? 👍👍👍

@i-bird2786 6 жыл бұрын

Good thank you /But why Valve lift system r ther /for what !?(not the sensor )

@LMAutoRepairs 6 жыл бұрын

i-Bird Hi Thank you for watching! Confused with your question... Sorry...

@i-bird2786 6 жыл бұрын

I mean i need to know !!What is the role of Valve lift system on this car

@LMAutoRepairs 6 жыл бұрын

i-Bird Ah... got you.... The valve lift system on this car, or on any other car fitted with this system, is the same... to increase the valve lift value... depending on the engine running conditions, that helps reduce emissions and helps the engine to run smoother and more efficient.... Something along this....

@i-bird2786 6 жыл бұрын

Thank you my brother

@MestreVintage 6 жыл бұрын

Notei em vídeo seu que o Windows era em português, você é português ou brasileiro?

@LMAutoRepairs 6 жыл бұрын

William Simberg Português...

@burhanotothp8725 5 жыл бұрын

hello where can we find the schema image?

@LMAutoRepairs 5 жыл бұрын

Sedre... Thank you for watching and for your comment!

@mattdiego8999 4 жыл бұрын

Depollution system faulty code, how to solve this problem

@LMAutoRepairs 4 жыл бұрын

That is a general message for engine issues... you need to scan the car... Thank you for watching!

@1zzjoker 6 жыл бұрын

Hello friend, sorry, you will have the purchase link of the DIAGBOX Aliexpres ?? EBAY? thank you very much

@LMAutoRepairs 6 жыл бұрын

Alvaro cutire Hi I got my one from cardiagtool.co.uk Buy from there at your own risk.... Hope that helps. Thank you for watching!

@mohdrizalmohdsyafie9678 4 жыл бұрын

hi sir, i got no spark with prince engine peugeot 308. it wont start

@LMAutoRepairs 4 жыл бұрын

Have you scanned the car? Visually inspected etc? Thank you for watching!

@mohdrizalmohdsyafie9678 4 жыл бұрын

@@LMAutoRepairs scan but no error code. Visually everything is ok. Last time it's running, but due tue leak at thermostat housing, I got it changed. But afterwards, it won't start

@LMAutoRepairs 4 жыл бұрын

@@mohdrizalmohdsyafie9678 If was running before the thermostat being changed, then I would go through everything that has been touched during the replacement... As it might be related...

@fasav52 Жыл бұрын

Une demi heure de vidéo pour simplement remplacer les 4 bougies!!!! Pffff😮

@gharbimecatronicien576 6 жыл бұрын

I actuate it by scanner but it no run

@LMAutoRepairs 6 жыл бұрын

Gharbi Mecatronicien You need to investigate why not then... 😉👍

@mmaswimokalapa9126 4 жыл бұрын

No power on odp 😭😭

@colinlyne1660 6 жыл бұрын

would I be wrong to ask you where I might be able to get an update on my softwear?

@LMAutoRepairs 6 жыл бұрын

colin Lyne You mean Diagbox?

@colinlyne1660 6 жыл бұрын

to be honest Im not sure I guess diagbox is the latest is it I really cant remember. It was so long ago

@LMAutoRepairs 6 жыл бұрын

colin Lyne Yes... it is the latest... Google will help you find it in no time... Hope that helps...

@colinlyne1660 6 жыл бұрын

thankyou so much there are so many to choose from would I be wrong in asking for your opinion as to which is best many many many thanks Colin

@LMAutoRepairs 6 жыл бұрын

colin Lyne I am not sure what is the latest version... I am using 7.83... if I am not wrong... Most of the packages out there come with the base 7.02 and then all the updates from version to version up to 7.83... surely there is higher versions now...

@ruftxinde 3 жыл бұрын

BM34

@mohamedmohamed-le7yc 6 жыл бұрын

hi ,lmsvvavr What is the difference between VVT Solenoid (VARIABLE VALVE TIMING) and the motor valve lift systeme ?

@LMAutoRepairs 6 жыл бұрын

Hi The VVT changes "When" the valve is going to open in relation to the piston position... So to open earlier or later... The valve lift, controls how much the valve opens... To allow gases to escape easier, or to allow more air in... depends where the valve lift system is fitted, intake or exhaust... There is a nice video that explains it very well... kzfaq.info/get/bejne/f5uUrJWH08ydZas.html

@autosport3081 6 жыл бұрын

Very nice job,well done,I would like to ask you,where can I get a PSA Diagnostic tool (DiagBox) like the one You have?

@LMAutoRepairs 6 жыл бұрын

Auto Sport Hi There is loads of online sellers... EBay can be a good starting point as well... Thank you for watching and for your comment!

@autosport3081 6 жыл бұрын

Is this a clone from China,or the OEM registered from PSA,as having a username and password that allow you to do things the clone can't?

@LMAutoRepairs 6 жыл бұрын

Auto Sport The only thing you can do more with the registered one, is the online coding and programming... You can still do offline coding, and programming, depends on which software you use, is just that will not be to the latest versions...

@autosport3081 6 жыл бұрын

I know that,but what I noticed is that you have the newest logos sticker on your cable,and it's in suite case ,with a VAIO laptop,I have Diagbox Version 7.83,but on the newer models with blueHdi (2017-->)I can't get a good diagnostic,as it's don't recognize all of the ECU,so can you please help me?

@LMAutoRepairs 6 жыл бұрын

Auto Sport You need to make sure that the interface has the UDS chip/protocol... which is used on newer cars.. My old interface, had the same problem, so when I replace it not long ago, I made sure that I would get the full version... Be carefully, as the old ones still out there for sale... Hope that helps...