haha class, great to hear you got the problem sorted.

Its quite hard wearing on this era, the velour seats are nice and soft.

Thanks

👍✌⚘👍406 très bon voiture 👍👍👍👍👍👍

Thanks

Thanks

what about front carpet removal video?

Great to hear that, best of luck with the repair

This one was a 2000 406, a D9 facelifted one, but i would have thought the D8s had the same folding down rear seats, sometimes the catch can get a bit sticky in which case you need to put pressure on the seat while pulling the release handle

Hi i think the seat dimensions are all the same although the designs changed a bit through the years and the connectors for the airbags, seatbelt pretensioners and seat motors may have changed. I dont think a 1996 seat will fit a 2003 car as the later cars had the multiplex wiring.

I have replaced old seats 406 from 1998 with seats of facelift 2004 and they fits good.

Thanks for the comment

+Marcelo Cañiza Unfortunatley not, to do that its a dash out job, i have a video covering the dashboard removal.

Yes you can disconnect the seats remove them and then turn on the car, obviously driving it witout seats poses a challenge but the car will start ok, the dash will put on warning lights. Having said that if you just want to clean the carpet and i know between the seat and centre console is very tricky to clean. Generally i unbolt the seats once a year for a proper cleaning, without actually disconnecting the wires or seatbelt, the seat can be held aside when using the hoover. Yes seats can get wet, im guessing that may not be the correct context of the question?

The facelifted D9 cars in both petrol and diesel if equipped with seat memory will have the ECU under the drivers seat. Although it does talk to the BSI as you are able to control it somewhat with PP2000

Thank for your reply. You have a lot of knowledge on this cars. Do you think it's possible to install and get it working without connecting to the BSI? I'll be direct with my question: I would like to install memory seats in my car (that has electric positioning but no memory), and I was wondering if buying a V6 seat with its ECU will be sufficient enough to do the work without touching my BSI (I have the fear of creating problems because it's delicate).

@@SebaZero Ah ive just been running them for 9 years, i dont know evertyhing about them yet haha. I think this has been covered on the 406 owners club 406oc.co.uk in the past. Ive never done the conversion myself as the saloon and estate ive had already came with it installed. But i do recall reading threads in the past of electric seats being retrofitted. You may do a bit of searching on the form, possibly ask on the facebook page if you are having trouble finding the right thread.

Hi It is quite likely that that is the fuel flap cable. I assume it goes though the floor out into the rear wheelarch where the fuel flap mechanism is. Check that it is indeed the cable, 406s dont normally do this. Pull up on the handle and have someone press the fuel flap, if it opens, then its not the cable. What can happen is the spring that flips the flap open when released can fail, It is possible to bend a clothes peg spring into shape to give the flap its spring back. A video i would like to do but just havent the time for.

On mine the spring was too weak so I added a spring from a laundry pin to the flap and now it works perfect.

Ebbe Linderoth-Olson hi Ebbe, I don’t know why I didn’t see your reply until now, but I’m glad that I’ve seen it finally! Have you done the spring replacement like the owner of this channel suggested? Can you please give me a bit more detail about what you did to the spring and how you fitted it to the flap? A picture would also be helpful, but unless you have your own KZfaq channel, there’s no way to post one on here. Thanks!

Thanks

Take a look at this video, its of the whole dash coming out, unfortunately​ the front of the carpet goes in behind the dash kzfaq.info/get/bejne/atSWZ8l_tpnMe4E.html

Hola, Por el precio de ir a 3 talleres para trabajos de diagnóstico, ¿podría estar acercándose al precio de una herramienta de diagnóstico PP2000? Alrededor de £ 40-50 aquí. Puede valer la pena conseguir uno de esos para poder mantener su 406 usted mismo. El PP2000 (Peugeot Planet) leerá los códigos de avería. La mayoría de las veces son los cables debajo de los asientos. Que es lo que cubrió mi video, en realidad estás en el video equivocado, echa un vistazo a través de este canal, cubro el problema de la bolsa de aire debajo del asiento con más profundidad: kzfaq.info/get/bejne/e99zgZB9q5qtaXU.html Este es otro video, no mío, pero cubre el 'resorte del reloj', la conexión entre el volante y la columna de dirección. Conecta el airbag a través del volante giratorio y también puede fallar: kzfaq.info/get/bejne/i7J3kpqQs7W9ho0.html El PP2000, si está conectado a su 406, le dirá qué parte del sistema de bolsas de aire está defectuosa para que sepa ir directamente allí para solucionar el problema. Si tiene alguna pregunta, no dude en seguir preguntando, estaré feliz de ayudarlo. También encuentre la página de Facebook para este canal. Estoy feliz de responder cualquier pregunta usándola si es necesario.

I found a $1 australia