I bought this kit and love it. I am currently using an Autel scope and all that I did to add the custom probes is open them in pico and looked at the properties of them and entered the settings in the Autel software. Works perfectly.

I can only admire your dedication to solving automotive problems and helping everyone out. This kit along with a direct line to you is priceless.

Nice. Thanks for getting this together, Ivan. Once I get mine, I'll probably only put the battery in when I need to use it. I have not had good luck with dormant batteries not corroding in any device.

Ivan is an industry Key Opinion Leader as the corporate lingo of these days seems to label guys as such......Well done again Ivan. Not only are you good at your craft, you’re willing to help others get good as well.

Ivan...I'm so glad you finally decided to sell them. Ive been waiting for an affordable one for too long.

Interesting adapter to convert actual pressure/vac and convert to an electronic signal and then see the results on a screen.

Eagerly waiting for part 2.

Nice kit and tutorial Ivan. Thanks!

You're an amazing man Ivan. 😉

You are such an enterprising young man.... Nothing but success in your future... Wish I could use this, but its way over my pay grade... I'm justa DIY shade tree mechanic... Good Luck!!!

You Make it look so easy Ivan

Wow, this is excellent tutorial! Love it! Great to see how you explain it and show how it works! I enjoyed part 1! Fantastic video! Many thumbs up!!

I bought the kit when it first came out for my snapon. It works great now that I am looking at pico scopes. When I get one I will have to order the bnc style power supply. Take it from Ivan's Pressure Transducers Woks fantastic and at great price.

Very cool, Ivan! The kit sounds like a great value and I hope it sells extremely well for you. If I had a Picoscope (or any oscilloscope for that matter) I'd place an order!

Ivan, Thanks so much for making this video. I have been at a loss as to how to install the scales for a while. I'm now all set up and will give the transducer a try tomorrow. I have a '95 Chevy S10 with a 4.3L V6 that has an intermittent loss of power, stumble and stall but restarts every time and I suspect a fuel pressure issue. I know that if the pressure on the CPI system ever goes below 50psi I will lose fuel through the poppet to the cylinder. In testing the pressure with engine off, running at idle and snap throttle, all checks out OK. I'm going to hook up the Pico with fuel pressure and secondary ignition and go for a drive to see which system is the culprit.

Like #216 Thanks for the video! Life is a learning curve! HINDSIGHT is 20-15!

excellent master project you did, it works wonderfully 😊 how can I contact you to ask for a complete kit about everything from the junction box to the 2 sensors, hoses and adapters, because I'm about to buy 1 on ebay but I saw now on this video that with what you sell is much better 🤝❤

Will it work on my humble micsig?. Thanks Ivan.

Hi! I'm trying to experiment a little bit, Could you please send me a link to where you buy your pressure Transducer sensors?? thank you in advance

May be a question you already addressed why not use a 12-volt pressure transducer sensor rather than a 5 volt already have a 12-volt battery in the car

im new to scope and have a Hantek scope. are the transducers anything special? i already have a Power supply and a cheap transducer from amazon. can i order just the transducers and adapters?

Do you get any fluctuations with that compression gauge hose, or do you recommend the higher strength one you can get from pico?

Nice... Could work as a stocking stuffer too.

Can you use it on a Hantek 1008c?

Why are scopes still using bnc?

👍

looking at my Modis Ultra on the probe options there are several for pressure transducers , 100PSI VACUUM, 100 PSI PRESSURE, 500 PSI PRESSURE, 5000 PSI PRESSURE MT5030 VACUUM AND MT5030 PRESSURE have you tried any of this options with your transducers or better yet buy the first and second one for your kit? just curios if it would work with the right transducers so you don't have to convert

hi ivan are you still selling pressure tranducers?

Hi. Can You make scales for european units like BARs or MPa or kg/cm2 for client like me? Greetings from Poland.

Can I used this on autel maxyscope? If I can I will buy 1 ... I’m student learning knew things Thanks

I have a Micsig ATO1104 scope will your kit work with it ?

Hey what is the response time of the transducer your using?

Hello Ivan. Can you use this with Hantek 1008c scope?

Nice one are sending to uk ?

Do u make some for Snap-on verus?

Put me down for one

Is STILL on sale?

You should put a USB video inside explaining everything, nobody else does that.

Ivan buddy, sell supplements like everyone else. Way higher profit margins without having to worry about actually helping people.

Jewel huh? I didn't peg you for a 90's pop guy.

Are you kidding me? 350 Dollars for this cheap crap? 😂🤣 And not including a hose? And the customer need to unscrew the box completely for replacing the battery?! I can build this for 50 Dollars. A transducer sensor costs 15, a plastic box 10, bnc connector and switch maybe 10-15, plus a few cables, most people have at home already. And I don't need a battery for that.