No video
This Switch Problem Is Way Too Common… No Power
Рет қаралды 2,022,212
Күн бұрынI bought this Nintendo Switch Off eBay. It was not charging at all, and I assumed the fix would be easy. It definitely was not... I attempt to micro solder and well, if you watch the video you'll see how that goes!
Marnics Channel : / marnicsmobile
Thank you for watching!
Website( Mail-ins & Contact) : www.phonerepai...
Second Channel: / @prgrepairtutorials
Ask a Question (Join the Subreddit): / phonerepairt. .
Social:
Check us out on Instagram / phone.repairguru
Or on TikTok www.tiktok.com...
Twitter: th...
Facebook: / phonerepairguruu
My Repair Tools:
Tools and Organizer( iPhone Screen Stand ) www.wrepair.com (Discount Code PRG5 for 5% Off Entire Store)
Display / Battery Programmer amzn.to/3kRi949
Tools Used amzn.to/3r9gibN
Qianli Clamps amzn.to/3eSoXL5
My Blue Mat amzn.to/37vGW6V
Ifixit Starter Kit amzn.to/2UJfvTq
Heat Gun amzn.to/2UL23hJ
Electronic Screw Driver amzn.to/3j00sgr
Filming Gear:
Lumix GH5 amzn.to/3o4pfmP
Rode Wireless Go Mic amzn.to/3GewsqI
Rode VideoMicro amzn.to/3r7p5Ng
Studio Lights amzn.to/3AI44vD
Spinning Thing amzn.to/3AI5Exz
Guru Approved:
Easy Button amzn.to/3rZASfI
Gameboy Case amzn.to/3KQcAgT
MagSafe Cooler amzn.to/3r6G95X
Nutella AirPod Case amzn.to/3KTmfDE
Giant AirPod amzn.to/3rVwfn4
Nano Leaf Lights amzn.to/3KS0zYs
Anker MagSafe Charging Stand amzn.to/3IKmQFK
Framed / Disassembled iPhones Display xreart.com/?re...
Phone Repair Guru assumes no liability for any damage caused to your phone as a result of any of the information contained in this video.
Do not attempt unless you are open to the possibility of further damaging your device.
@PhoneRepairGuru 2 жыл бұрын
I'll be continuing to learn how to microsolder and teach you guys along the way. Expect to see both my fails and succesful repairs! Thank you guys for tuning in as always, have an amazing day!
@Umzy05 2 жыл бұрын
Don’t worry everyone makes mistakes. Learn from it and don’t do it again.
@landenplaze9764 2 жыл бұрын
I hope you have an awesome time learning how to microsolder and it’ll help you a lot in your repairs. 👍🏻
@m.mubashirawan6213 2 жыл бұрын
He guru bro please can u gift me an i phone love from Pakistan
@AlaskabumIV 2 жыл бұрын
Dude accept his reguest youll get better
@aqeelrasasi618 2 жыл бұрын
Can’t wait to take this journey with you!
@JoeyDoesTech 2 жыл бұрын
As someone who's done some learning on these recently, your first attempt went SO much better than mine 😁 If you've been offered a chance to learn quicker, definitely take the chance pal. Looking forward to seeing some of this content 😎😎
@rayyansheik 2 жыл бұрын
Nice content Joey
@JoeyDoesTech 2 жыл бұрын
@@rayyansheik Hey thanks :)
@rayyansheik 2 жыл бұрын
@@JoeyDoesTech NP
@wolfboy9471 2 жыл бұрын
Yes you really should i am trying to learn how to micro solder butt self teaching is hard
@wolfboy9471 2 жыл бұрын
Also you are one of the main reasons I got in the phone and conputer repair business
@Mimikyu_Lov3r 2 жыл бұрын
This is a first-generation model due to have the model number being HAC-001, the second-generation model has HAC-001(-001). You can tell by the back of the switch. Some of the key differences of the two is the second Gen model has batter battery life and better processing than the first Gen model (among a few other things)
@dill6598 2 жыл бұрын
Does it have better processing? I didn’t think it did. The better battery life would have been more than welcome for me tho. I got my switch on Christmas 2017 and the battery life is absolutely garbage and horrible. I know this because I brang it to school once to play mariokart 8 deluxe with my friends. Apart from that, I think the switch is a decent console, but I also don’t like the joy cons and find them very unreliable and they really can’t stand the test of time.
@badcatalex 2 жыл бұрын
@@dill6598 No, it just has a more energy efficient processor.
@dill6598 2 жыл бұрын
@@badcatalex yeah that’s what I thought and I’m not sure about getting a new switch to be honest I think they are a little overrated especially if you plan to use the switch over a long period of time. I just don’t find them durable enough
@badcatalex 2 жыл бұрын
@@dill6598 I have a Switch Lite and I have not had any real issues despite it being used and a hand-me-down at that. Only complaint is how expensive games are.
@dill6598 2 жыл бұрын
@@badcatalex yeah the games are super overpriced it’s kinda ridiculous that’s how they get you
@roldanjohnserrano 2 жыл бұрын
Do the micro soldering! It would be a great experience for you and additional skills as well. You will have tons of content when you master it. :)
@obviouslyleah 2 жыл бұрын
He already did
@ParodieHecker-mobile 2 жыл бұрын
I feel like I've been waiting for decades for your "micro soldering journey" :D Please do it!
@SwitchSucksAss Жыл бұрын
Nintendo switch is garbage lmaooooooooooooo 😂
@TheShoeJr 2 жыл бұрын
Absolutely try micro soldering! I already find regular soldering fun, but I’d love to learn about micro soldering.
@GavinColbourne 2 жыл бұрын
Immediate issue at 1:20 DON'T use a USB-B to USB-C cable at 5v (normally max's out at approc 1-2.5A). Always use a PD USB-C to USB-C connection which should be approx 15v. The official Nintendo charger is set at 15v so always use that as a baseline
@Av65784 2 жыл бұрын
How did you know the problem in the first place?
@LowPolyPigeon 2 жыл бұрын
@@Av65784 It's a known issue. Soon-ish after launch folks were having problems with switches not charging / powering on (like the one shown in the video), and folks eventually figured out it was due to 3rd party chargers / docks providing the wrong voltage and eventually frying the power management chip. It's probably what broke this exact switch.
@MrPetpet111 2 жыл бұрын
@@LowPolyPigeon Only issue I had one and a half month after launch was the low on battery spam where the remaining battery percentage jumped somewhere from between 100 and 25 percent before going to 1 percent which took them to fix somewhere around Splatoon's 2 release day. Which I heard I wasn't the only one with that issue when they announced those AA battery pack accessory for joy cons before Arms release. Though I would say late buyers would be less aware of threads that were posted since launch against the ones posted much later. For example the hidden message in the Switch Pro Controller that got reposted later on by someone else. Then you have those Bluetooth issues some people have when their joy-con disconnects and like 2-3 months ago some person that some how wasn't aware of being able to get gold points from physical games.. Like how can someone who would check whether a game has an update or not at the +/- application menu of home not see it.
@blueschnabeltier_ Жыл бұрын
USB-A*
@AimlifestyleX Жыл бұрын
@@LowPolyPigeon Some issue with iphones people use cheap charger and it's short out parts on the mother board
@crazycarrots0782 2 жыл бұрын
Just caught this at the end but in case you didn’t see, those joycons are fake. The plus and minus buttons at the top look way different to the normal ones and the buttons on the left controller look weird too.
@balls457 2 жыл бұрын
100%
@jqvxx 2 жыл бұрын
The ebay seller probably replaced them if they were shitty joycons
@nathanrobar8667 2 жыл бұрын
Same I saw it and was looking for a comment about it
@stevenmartell2289 2 жыл бұрын
I’m glad that you knew when to stop. That’s a skill not a lot of people have. Id recommend taking chips off dead boards so you can get a feel for the heat and airspeed needed for your hot air station. Also a bent nozzle can help so you don’t have to go at it from an angle like that
@Umzy05 2 жыл бұрын
I’ve been watching u for a long time ur one of the best repair guys
@dr.atheist3087 2 жыл бұрын
Take his offer it'll help you in the long run
@Sandra.402 2 жыл бұрын
0:06 not getting away with that voice crack
@Weapon_20_X 2 жыл бұрын
With how in depth you are getting with some of your repairs I think you should definitely take the micro solder guys help. It will make for new interesting video repairs plus you could expand what things you repair too. I really liked seeing a change up with a new device repair.
@TheNolanRamos 2 жыл бұрын
I’m sure your boy is a great teacher for micro soldering but we would love to watch your journey figuring it out yourself.
@Max-9632 2 жыл бұрын
You just need to undo the middle screw on the joycon rail
@PCJesus0 2 жыл бұрын
That's what I was gonna say, at least I'm not the only one who knows
@mattclarenzmendoza7127 2 жыл бұрын
Shut up, he don't have any idea, pardon him.
@PCJesus0 2 жыл бұрын
@@mattclarenzmendoza7127 we weren't being mean about it, we were letting him know for next time
@SwitchSucksAss Жыл бұрын
Nintendo switch is garbage lmaooooooooooooo 😂
@Michael-hk9xr Жыл бұрын
top 5 words said by a 9 year old:
@liammasonsschoolofficial Жыл бұрын
You only have to remove the middle screws on the joy con rails
@alex_mcburney Жыл бұрын
As someone who has never owned a switch, this video was very helpful.
@benthecat4345 2 жыл бұрын
The only reason why this is common is because people used 3rd party chargers and docks with it that don't provide the correct charge that the official products provide (essentially what it is is product mishandling and not an issue caused by manufacturing)
@marcog2737 Жыл бұрын
Also they leave the console plugged and maybe there’s a power outage or a lightning.
@malolojrr 3 ай бұрын
How to fix it... i made that mistake, I connected my (working) Switch to a third-party dock and charger, and it suddenly turned off and won't turn back on. Can anyone help? Any tips?
@ChrisCJ1969 Жыл бұрын
Thank God for you and others that do what you do. The more I see videos like this, the more I'm reminded I don't ever want to do repairs again. 25+ years and I'm burned out. No more patience.
@FixItKid 25 күн бұрын
bruh I'm 13 and I fix things because I love fixing things
@MichaelKnottsRealtor 10 ай бұрын
Subscribed for "I have no clue how to micro-solder, everything is me hoping for the best". I have been soldering for 10 years and I always feel that way
@chasefournier 2 жыл бұрын
I have several videos detailing how to diagnose and fix it these switch boards. No power/not charging can be several issues.. its a great device to learn on. Take care bro! 😊
@terryesparza6859 Жыл бұрын
I strongly agree with you mate. Investment is the key to sustaining our financial longevity, and not just any investment but an investment with guaranteed return.
@colbygibson7594 Жыл бұрын
To earn more you are required to have a multiple diversified stream of income, which is why investment is an avenue of making more money once it's profitable.
@dustincarlson2729 Жыл бұрын
It's more wise and save that those intending to start crypto journey learn the trade withprofessionals who understand the market quite well, with that maximum profit is assured.
@terrencestuart7384 Жыл бұрын
l also can be a profitable in trading all it will take is determation and mentoring even though you lose money you keep on trying
@mudashirushakiru8549 Жыл бұрын
It's not that a professional don't lose trades they lose but when they gain they gain all they have lost and make more profits on top just like my account manager Mrs Stacy griffin kartner her strategies are profitable and her company is 100% trustworthy
@lindastadnky4390 Жыл бұрын
Risk management Is a vital element of success for any trader in the Forex market no matter the size of your capital or investment particularly in highly volatile market like crypto currency. Learn how to manage risk to minimize losses. Am not a pro trader, but have been making huge profits investing and following the instructions of Stacy griffin kartner
@MrAwesome4184 2 жыл бұрын
I’ve been watching your shorts a lot and haven’t really sat down and watched a whole video. Just got a new fav long form video creator
@PhoneRepairGuru 2 жыл бұрын
I appreciate that!
@MrAwesome4184 2 жыл бұрын
@@PhoneRepairGuru keep kicking dude!
@KingMonkeREAL 11 ай бұрын
I had the exact same problem with my switch years ago. It's interesting that you call it a common problem, because this was the only video I could find talking about it.
@partakeofthefruit 2 жыл бұрын
If you end up taking that masterclass you will be unstoppable
@jatinkumar5828 2 жыл бұрын
You’re beat at your job! And knowing micro soldering would just add up to your skill set! So go for it! Would love to see you do it
@GrandMasterShein 8 ай бұрын
Don’t feel bad. I too did something similar in hopes of repairing my switch. I tried to reball a micro chip on the flash memory and ended up destroying the whole board by mistake in the process. Had to order a new flash memory and hope I can figure out how to get my switch to boot back up without damaging it further. Beat myself up for days
@pestevee1555 2 жыл бұрын
I don't understand the technologies but I love it.
@tinman9341 2 жыл бұрын
Don’t get down my friend. I started the same way doing board level repair about two years ago and by no means am I close to an expert. I still struggle every now and then but the important thing is to not give up. Look up NorthridgeFix and Louis Rossmann. They were invaluable for me to getting started. Don’t give up my friend…..remember, a journey of a 1,000 miles starts with a single step!!! Thanks for what you do!!!!
@ashtonfox6803 2 жыл бұрын
He’s got the fake Amazon joy cons
@raven_martin513 2 ай бұрын
So?
@ashtonfox6803 2 ай бұрын
@@raven_martin513 this comment is two years old.
@raven_martin513 2 ай бұрын
@@ashtonfox6803 yeah so
@dyingfrozen 2 жыл бұрын
Man, I laughed so much when you sent the chip in orbit. That was golden.
@gio-yj3en 2 жыл бұрын
No worries man, when I first started to fix broken nintendo switches I also mistakes, where it made it way more difficult to fix myself. Then I started to buy better equipment and learn from my mistakes as I go.
@Carterthielftw_ 2 жыл бұрын
Its so sad to see awesome educational videos get fewer views than your normal ones just because "soldering" is in the title. Keep up the great content nevertheless!
@goldengoat1941 2 жыл бұрын
I have a nintendo switch lite and for some reason it feels like it charges faster when im playing on it then when im not any ideas why this would be happening?
@goldengoat1941 2 жыл бұрын
@Covid_19king good point
@hortuk 2 жыл бұрын
i used to solder and desolder random crap on broken boards at least once everyday. you eventually get better and confident too
@AmongUs-hv4yw 2 жыл бұрын
I loved how he slapped the easy button
@uncrustable9923 2 жыл бұрын
couple questions, why is the screen so dim? have you tried turning the brightness up? also fyi those Joycons are fake and also how did you end up getting it to work? wasn't the problem the charging port not the chip that didn't do anything?
@adrianoperez2257 2 жыл бұрын
very nice fail video, good to see this kind of thing =) hope you learn and evolve into micro soldering
@leoglantzman521 Жыл бұрын
As an electrician I’m fascinated by electronics and soldering.. such a valuable skill today. Earn hundreds of dollars for every project
@catalinnicolaevici2061 Жыл бұрын
Always always find a Mentor guys I'm 36 and my electronic engineering mentor is 59 I met him 19 years ago and being under his wing is the best!!! I have learned so much from him and been into helping him build a invention that he came up with and he's helping me with mine!!
@deathraychannel893 2 жыл бұрын
If you want something golden for removing stripped screws get some ez grip liquid it has come in really handy for removing rusty stripped screws from aircraft
@heidar8432 2 жыл бұрын
It was amazing, a different video, a different way, a different device and ...
@jeffrey_jpeg 2 жыл бұрын
The fact that you have that Staples easy button makes me proud!
@KeyserTheRedBeard 2 жыл бұрын
terrific upload Phone Repair Guru. I crushed that thumbs up on your video. Keep up the very good work.
@_vinston 2 жыл бұрын
Should give a try on micro soldering it would make a good series
@atta30 2 жыл бұрын
The very best way to learn is to find old/junk electronic either at your house or a thrift store take it apart and get some soldering equipment and practice removing and replacing parts if you damage anything it’s not a big deal because it’s not much money spent eventually you learn to do it very well
@donixion4368 Жыл бұрын
At least you didn't rip up a pad. At that point, it's jumper wire time and that can be a true pain.
@maxwellrobbin8709 2 жыл бұрын
With all those knowledge you know about the inside of a device , you should have your own merchandise
@sarahmallonee 2 жыл бұрын
That's an amazing offer and an amazing opportunity you should without a doubt take him up on it as soon as you can. Good luck
@mattveness1193 2 жыл бұрын
Go and learn without a doubt, it’s the little nuggets of info you can get from a pro. that are priceless.
@SpazzyJester 2 жыл бұрын
Take it from me, a person who struggles from learning things on my own (also not religious myself) If you're offered to be taught a skill that's potentially beneficial, take advantage of the opportunity. This is a blessing, given by a master of the arts and trade, who is willing to show you the trials and errors of this craftsmanship, to embrace mistakes and learning to overcome any and all obstacles preventing you from succeeding.
@2moist2meaty Жыл бұрын
In regards to the whole videos being your primary source of knowledge for microsoldering so far: my primary source of knowledge on building pcs, and fixing phones had been youtube and just the tiniest bit of ifixit(when I got hands on with my first phone) and y’know, it did me very well. Folk like you and jerryrigeverything have taught me alot and I couldn’t be more thankful, you’re a great guy. That being said yea I don’t think I can get into microsoldering from just youtube, I’d likely fail in the aspect of knowing how to diagnose the issues as well as being too fatfingered to be careful enough
@2moist2meaty Жыл бұрын
I know this video is old, and I don’t know what happened succeeding, but like you should take that invitation if you haven’t already, I would be thrilled to have an opportunity like that myself
@philippeleprohon4823 Жыл бұрын
I know nothing of sodering myself, and honestly, if I was you, I'd take the offer!.
@malice6081 2 жыл бұрын
I have an oled model, they are nice with the infinitely adjustable kickstand and bigger screen
@TannerMillerVr 2 жыл бұрын
definitely should do some upgrades to the switch that would be cool
@noblackthunder Жыл бұрын
Fun Fact ... i have had my OG switch have like 6 times issues with no power ... not even reacting to charging. Turns out the chips inside it did hang after going under voltage. Solution was to charge it for an hour even though nothing happent .. and then do a emergency shutdown .. like when the system totaly hangs. . and then it turned on again . not sure if it was volume down or up + power button fo 30 seconds or so ... that has resolved my no power issues when ever i had them without the need to solder anything and it worked fine after that
@wesleytoulouse7186 2 жыл бұрын
Do it! Take the training take the opportunity!! Seriously it’s a great opportunity to learn from someone experienced
@X-GamerPro-HD 2 жыл бұрын
5 years. That’s insane. I can’t even remember the day it came out…got it on seconds of the day release…. Now I have the LED version as well.
@djlancematthew Жыл бұрын
Nice video! You are from the sound of things right about the same place that I am. Baby, I’m a hair behind you knowledge wise. I like to take stuff apart and fix it. I have zero experience with micro soldering, or even actual soldering for the most part. I may have picked up a soldering iron a couple of times, and I’m terrible at it. I do believe that you should take up someone on their offer to teach you Micro Center, as well as continuing to try to figure it out on your own at home, so long as it doesn’t cost you a bunch of money. Good luck to the both of us!
@AnUmbreonNamedRaire 2 жыл бұрын
You should do a mix - take the offer to help fill in the gaps in your knowledge, but leave enough things still to learn that you can do stuff by yourself
@mr.mastor 2 жыл бұрын
you should definitely go to Marnics and learn how to micro-solder. definitely show us all you know about it!
@dragonwatcher9913 Жыл бұрын
2:21 you only needed to unscrew the middle one on the side pannel (the other 4 old the side bracket in place but the 1 middle one per side panel holds the back plate on)
@nahventure3873 2 жыл бұрын
Just a why not comment, the switch I'm pretty sure is 18W @ 9v. You'd want a power supply with USB PD, and probably a good one at that since you'll venture into this. Usually you can tell what's going on by whether or not a device negotiates USB PD, especially on the switch where the chip tends to go wonky (esp. if used with low quality power supplies). Cheers.
@nahventure3873 2 жыл бұрын
regular usb can do higher voltages/amp/wattage but it won't be for PD afaik. I'd just go all usb-c at that point though.
@nahventure3873 2 жыл бұрын
commented before watching but yeah you realized the charging IC is usually a POC
@ithmammorshedhossain757 2 жыл бұрын
0:46 the legendary face...
@ryanzanatta2965 2 жыл бұрын
not only did I stumble across a Canadian chanel for tear downs and reviews. you used marnics. which is from my home town. cool 👍 new sub for sure
@AnoikseTheia 2 жыл бұрын
What i did for mycrosoldering when i was started..it was to take locked boards or old phones that could turned on and i was taking off capacitors and stuff and resoldering them back to see if the board at least could turn on
@movingrivers 2 жыл бұрын
this video was really fun to watch as someone who likes taking stuff apart
@Tr1nF1nity Жыл бұрын
The Switch Did His Face Reveal At 0:41
@dioszawarudo1890 2 жыл бұрын
Lol it’s funny how you just instantly went to hit the “easy” button.
@elpotato2887 2 жыл бұрын
Nice video! i like what you are doing continue like that
@TheMagpyeTrader 2 жыл бұрын
I'm glad there was a happy ending.
@endergamer7466 Жыл бұрын
Man I really like your videos and in every episode I learn more new stuff in advance,keep your amazing work going master
@miriareu 2 жыл бұрын
Nice one buddy. We all started somewhere.
@DyNaMiT2022 Жыл бұрын
Nobody saw the BQ chip was burn out at 5:21 😂😂😂
@mecasacax Жыл бұрын
That's a piece of foam
@DyNaMiT2022 Жыл бұрын
@@mecasacax Oh my bad
@NeverNormal_GD 2 жыл бұрын
Lol that "that was easy thing" lmao
@mklvrepairs 2 жыл бұрын
Keep micro soldering mate. Some thing happens when I start it. NEVER GIVE UP
@HarmonicVector Жыл бұрын
"I have no power." - -Max Verstappen- Nintendo Switch
@c.p.tnightwolf3742 2 жыл бұрын
You should do the micro soldering it would save you a hassle and time. And by the way nice job on diagnosing the problem.
@Gogoseit 2 жыл бұрын
I just found your channel by accident. I was considering becoming a tech repair person myself, after I scored a free Nintendo switch lite quit by a giant stroke of luck. I had wanted a switch ever since they came out. it reminded me of all the hours spent playing on a Nintendo DS. although, my parents are unable to buy me one. one day, when I was walking to school, a pink Nintendo Switch lite flew out of a speeding car window. from a distance, I couldn't quit tell what it was. when I got closer, I knew I had encountered a one in a million stroke of luck. it felt as if the universe was rewarding me for my hardships. but, alas, I have no money, and cannot afford to fix it. by my calculations, it will cost around 40 dollars to fix it. and, I'm not even sure if my diagnosis of the thing was correct. I do have experience fixing electronics as I used to fix Nintendo DS systems for my friends. I can even solder a little. I hope to save up enough money to fix the thing soon. I also have no clue if it has an account registered to the thing. I haven't opened the device up as of yet, and it has been sitting in my parents drawers for almost a year by now. I hope to fix it soon, although earning money as a minor when all your family is piss poor is very slow, and its even harder when you feel obligated to pitch in for things around the house. I have decided to hide my money away, and currently have $4 hopefully I forget about it so I don't spend it.
@pretty_bored 3 ай бұрын
Looking at the inside, my phone needs that cooler more than my switch 💀💀
@XViGames0 2 жыл бұрын
**me, not knowing the year anymore** "But the switch wasn't out in 2015?"
@ShortMiao Жыл бұрын
Man, that's a ton of games! Great Work!
@terrenceafatsawo9128 2 жыл бұрын
MagSafe on the switch would go hard
@MartinKis-dx3oq Жыл бұрын
Go and learn it mate, it’ll be great fun for both you, and us! 😀
@user-dw6fj1py1o 2 жыл бұрын
7:54 Lord of the rings map lol.
@AutumnOnFire 2 жыл бұрын
I'd happily watch you learn to microsolder.
@Paco8478 2 жыл бұрын
Now I know what happened to my old switch
@ohkubey 2 жыл бұрын
U should Marnic because its better than screwing up again
@ishii-00001 2 жыл бұрын
Yes pls do microsoldering!! I want to see you fix more than phones.
@erina3317 2 жыл бұрын
Your work is incredible
@crazywhiteboy42 2 ай бұрын
Wow thanx for making this video it helped me out a lot. I will be turning in more often thank you.
@JayMikeFunOfficial Жыл бұрын
BRO THE COSTCO CARD!!! 😂😂😂😂
@ryanwakebradtelle8682 2 жыл бұрын
I couldn't tell you what it means but if you look it up the amount of voltage that it takes when plugged in can help you diagnose what's wrong
@BB0647 2 жыл бұрын
Do the Microsoldering journey please. Thank You. Love your videos.
@worldisagame9372 2 жыл бұрын
you can always ignore some capacitors😉
@hitnrun66 2 жыл бұрын
Nice to see you working on things other than phones! Was probably a breath of fresh air for you?
@AnthonyTo 2 жыл бұрын
you should do more nintendo switch videos
@realquadmoo Жыл бұрын
I'd love to see your microsoldering journey!
@ubreakifixrepairs1689 2 жыл бұрын
@Phone Repair Guru only have to unscrew the middle side screw on both sides to get to the main board
@celdrichanfgarn5168 2 жыл бұрын
I love you videos!! Always just watched the shorts and boi, did i miss out!
TheCod3r
Рет қаралды 26 М.