LOVE this tutorial! I have been looking for something similar to a memory gift! This is perfect!

I think this is one of the best and easiest photo ornaments tutorial that I have ever seen, and I am going to use your method to make my memorial photos. love this very much! great job!

Thank you so much for this step by step and very detailed tutorial! Finally, I found someone who explains something in every detail!! 😁👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻

By far one of the best tutorials step by step thank so much

Came over from off the mat to watch this. Fabulous job! Subscribing now!! Would love more tutorials!

Your tutorials are great! Can’t wait to try these!

Thank you for this!! I have a customer wanting some in memory ornaments and I tried putting the memory quote on with vinyl. It was a disaster! You made my day with this tutorial 😁!!

Thank you for sharing this beautiful floating ornament 😘 I love it 😍 I always wanted to learn how to diy this 👍🏻 I am going to definitely try this... I am so new to my cricut I have so much to learn- but you explain this so well... I would love to see more diys that the cricut machine can create. Have a bless day...

LOVE!! You are wonderful in how you explain the how to's....excellent gift of teaching you have. Thank you!

you definitely made it dummy proof!!!...so i should be able to do this!!!.....thank you so mush!!!

Thank you, thank you, thank you. What an easy tutorial. You made it very simple. Super good tutorial . Thank you for sharing this with us.

To the point...exactly what I was looking for..thank you so much for your time!! Xoxo

Woooah!🤯 when she sliced the square into a circle!!!! I never you could do that!

This was amazingly helpful! THANK YOU! THANK YOU!!!

Very nice, direct and to the point. Thank you!!

Awesome tutorial!!! Thanks for sharing!!!

Great tutorial! I can definitely do this. Thank you soo.... much!

This was so awesome thank you I’ve been wanting to try this

Thanks for making it so easy to follow. New subscriber. Can’t wait to see more. I hope to start using mine more.

Thank you so much. It worked by flatten it

Wow thank you so much new with all this but will definitely try this. Blessings

Very clear and informative video. Thank You.

Wonderful video. Might give it s try. Thanks

Great video very detailed. Thank you

Awesome! Thanks for sharing

Wow that's awesome 👍

Loved it, thank you.

Awesome job!!!

Great video. I will try it.

wow i see this is an old video but love it. simple easy to follow i want to go get me some ornaments lol

mind blown! thx!

Brilliant!!!

Great video!

you made this so easy trying tomorrow

awesome tutorial! thanks

Good tutorial. Thank you.

Love this thank you

Thank you so much! Making these today for a couple mom volunteers for my son's cross country team. Do you know the cut settings for the silhouette? Love this tutorial! THANKS AGAIN!

Thank you for the tutorial I am having a problem, my tab keeps cutting off of the circle. How can I correct this

Thank you I will look now.

Great tutorial, thank you! My question is, when you say "standard size" ornament, what size is that exactly? I am using a 3.25" round ornament so am trying to figure out what size to make my image in order for it to fit.

So great thank you

cute idea!

love it thank u

Thank you so much for this video

ty for this tutorial xoxoxo

your 2-1/2" insert for the floating ornaments I cut and made but what size if the ornament itself so they fit into disc

Do you have a video showing how to add the picture with the words?

Great tutorial!! Have a question! When i do the print and cut it doesn’t cut around the complete circle is there something I’m doing wrong?

You tutorial is easy to follow. I thank you for that. My pics are printing dark and it’s are to see. One pic is hands holding a red rose but it’s hard to see and it’s 3”. Any tips?

Hi, thanks for the tutorial. I have cut 4 ornaments out so far and 2 of them for some odd reason it doesn't cut a centered round circle, 1 cut into the picture on the left side & outside the picture on the right side (which left a blank spot) and the 2nd sheet did the opposite, it cut outside of the picture on the left side and cut into the picture on the right side of the circle. It's very frustrating and this transparency is not cheap and I have wasted 2 sheets now. Do you have any suggestions on how to get it to cut all the way around the ornaments print out? Thanks for your time.

what setting on printer do you use when printing?

If the ball is 2.69 how do i set the setting. Is it 2 in height .69 in width?

I have the 80mm disc ornaments. By any chance do you know the size I need my template to be for those?

Have you done anything with the photos outside the ornament?

Penny pincher here, can you get just one memory disc out of a sheet of transparency film, or can you use it a second time in the bottom area to get another disc?

Thanks adorable!

Thank You

Have a cricut air2. I have used the Foil Acetate and the Transparency. The cricut is cutting the circle twice and the stem once. Do you have any other suggestions? Thank You

I have a question about the transparent film. Once you cut it. How do you use the rest of the film. I have the same problem with printable vinyl. I cut a piece out then the rest is thrown away.

How did they actually turn out on the tree? My ornaments you cant really see the pictures.

What type of cuter do you use?

I’m having a hard time with getting the picture to be able to be sliced I saved it as a print and it’s still not letting me slice it. Any advice

When I see the image on the print then cut mat it shows the stem of the ornament. Then when I go to print it it is not cut out the stem just the entire circle I did attach it in my layers what am I doing wrong?

How can I get rid of the black square around the round ornament templet?

What printer are you using?

How do i print does it have to be a wifi printer i dont know how to print it plz help

Hi. I am doing everything you are showing, however the cricut is cutting the neck off my picture. What am I doing wrong? Please help.

Can you put it on glass/

Hello. I need your help! I make an ornament before following your steps and now I keep getting an error saying that the machine cannot read the cut sensory marks. Any suggestions?…

What size is the ornament? Does this project fit any size ornament?

what size are you makeing please

How did u do the in Memory one???

This is a GREAT tutorial! Thank you!! I notice on some of the first ornaments that you have vinyl on the outside. They are GORGEOUS!! Any pointers on how to do this with the curvature of the ornament without making creases or air bubbles? Any chance you could possibly do a tutorial on that? :)

Hi! Can u please tell me what kind of printer you are using?? I have an Epson ET-2720 for sublimation and then an HP Deseret. I've tried to use both and the ink won't dry. On the HP everything just disappears

I use to make these back in the 90s without the vinyl

Please Explain the program you are using ?

Great tutorial. You can hear you so many do tutorials and you cannot hear them. Thanks

HI I JUST PRINTED MINE, THEY LOOK AWESOME, HOWEVER THE TIP WAS CUT, AND I WELDED IT. WHAT DO I DO?

How about transparency with words message on it and no picture?

when cutting it cut around and the square on top 2 times then the 3rd time it cut the complet circle and cut thru the square on top...any suggestions on how to fix that .

How do you get more than one ornament on the film so you don't waste the rest of the film?

Love your video, very helpful. I have a question. I can print fine but when I go to cut it, with the settings on custom, then acetate, it cuts three times and then cuts the tab off. Any suggestions? Thank you

Is there a way to make the colors more vibrant? The one I tried you can barely make out the images unless it is against a white background....I am using disc ornaments, so I wanted to glitter the back half, but then I cannot make out the picture at all

When I do go to cut I get and error message saying it can’t be read or to use a white background. Any tips?

Hi! What is the measurement that you used for the neck of the ornament? Thanks :)

Mine didn't want to do the cut part it said cut sensor marks on the print could no be detected

So you did not use the Cricut to do it?

Can I ask what kinda printer you have? Your colors are so pretty

can you please tell me how you got the photo uploaded into DS. I went into DS clicked upload, browsed my photos clicked the one I wanted and opened it. Then I chose complex and when I clicked continue all I got was a black box no picture.. HELP.....

What printer is best I tried doing it on my printer and it comes out smudge

When cutting the machine cuts off the stem. I read the comment and it said to flatten but when I do that it doesn't give the option to cut the shape. Any suggestions?

when i go to upload my photo it always brings me to the steps of picking simple, moderatly complex or complex. how do i save my photo to bring the actual photo to design space with out that step

I am having trouble slicing. When i attempt to slice it turns the whole thing grey.

I tried this and all went well accept it cut off the stem.. I did exactly as you. What could I have done wrong

Great video everything worked but you can't see my picture very well what can I do to make that better?

When I cut it the first time, it cut off the top as well. I read your tutorial and it said to flatten it, when I did, the neck printed out gray...how do I get it to not cut off the top and to not have the neck be the color gray?

Just wondering what photo program you are using to print the picture on the acetate, as I need to get a program, great video

Hello, Question. Why when i send it to print my screen doesn't look like yours on the screen the pic is on one mat and the ornament is in another. Why? What I'm doing wrong?? TIA

I can't get photo to save