I watched them spinning big stuff at Arts Metal Spinning , outside of Vancouver BC . Canada . Never got over the endless possibilities for metal fabricating . Liked their background display too .

Thanks great video even better because you put no silly music over it.

Those 2 make a good team. Nice video!

Beautiful work. I've seen it done in a more primitive work shop. Takes a skilled hand not to thin it down to much an its good to start with good metal. I've seen horns made an refinery parts made. That was nice work. Thank You Loader.

I did metal spinning for a few years after high school but mostly with brass and aluminum. Brass bed and lamp parts. Even made aluminum hoppers for Dunkin' Donuts. Loved the work.

Ed Harris, great professional! 😁

Nice poster collection.

Very cool video . Wish you could have elaborated on the different types they were turning and why certain actions were being taken by the turners and helpers !

Enjoyed the video very much, thank you for putting these clips together with especially the sound of the machine so as you can hear the load being applied. In my opinion that is better than having to turn down annoying music and hear nothing. John, Australia. PS Thumbs up.

3:29 the ghost cackles one final time as it is trapped in the vessel. Good work, boys!

One tear on that metal spinning and there goes the head or arms 😱

Man,if OSHA saw this guy using his bare hands on a high speed spinning piece of metal they would freak out.

Love how the two guys work together as one .

Spinning has always been impressive... years ago I used to spin products off a 120 inch lathe... (with no assistance) if you've spun larger than that, I'll be very impressed!

Amazing Spinning! Amazing Metal Processing!

These videos are truly fascinating! Thanks for adding them.👍👍👍👍

No ads, ball's of steel shined to perfection

Metal rolling is an art! Special alloys are available for aerospace products operating at very high temps. We used RA-330 & other materials for combustion chambers for the turbine engine start carts for military apps. Also, we used rolled wheel halves for "Rich Bogart Racing Wheels". (Phoenix Az) Pick your width & offset for a perfect fit. Really fine products! 👍

3:30 Looks like these guys get inspired by ladies naked pictures on the wall, to work hard through out the day.

never knew Ed Harris was so multi talented

Looks like the Max Headroom guy had to get a day job.

brave man. I did silversmithing at University. We had a visiting instructor who was to teach us spinning. he had a deep and long scar from his forehead, across his cheek and into his chin. He learned the hard way, made all of his students very nervous.

Сказ о том,как быстро запилить тазик) Very good. Golden hands.

@This Old Tony do you see how they have one bloke holding something on the edge whilst the other shapes it maybe something like this would stop yours from buckling.

I think this is the first time I have seen hand held tools used in metal turning!

excellent way to make car wings /fenders . if in the usa.. just form and then cut in half.. hey presto

damn that looks dangerous. great job man, really a skill

mesmerizing... watched it 3 times, still not sure what they are making, but still bad ass...

I been to a place in Colorado where Two brothers spun metal, they used big maple molds great stuff

Remember when every workshop used to have posters like that?

gua fokuss sama gambar yang nempel di dinding sebelah nya😄😄 amazing...

súper vídeo . súper work exelente..thx. gracias....

Jesus Christ I’ve been a CNC machinist for 17 years. I had no idea you could use hand tools on the lathe. That’s nuts.

that's some amazing shit I've never seen before....ty

Metal spinning is a lost art.It almost remind me of metal forming.

Highly talented craftsmen cheers from a manual machinist

5:52 Ed Harris in his most dangerous role.

Now I know how UFO's are made.

Только ЛАЙК, молодчик мужик, ни кождый согласиться на такую работу, я точно нет. Замотано и не успеешь опомниться. Хотя чугун, всё может быть, но подготовка всех преблуд и станок включая, может занять не один месяц. Удачи!

Super ! The best, the machine doesn't working but the human working.

Was so into the work being done I didn't see the ladies on the walls until my SO pointed it out. lol Amazing stuff.

What an expert touch these men have.. Bravo! Skilled professional labour is hard to find... Well done men..

Un maestro en su profesión ...y bonitos posters

Hello, I am Marwan from Morocco and I have mastered this craft

Nice pictures on the wall :)

That is some great work

It would be nice to know what they are making. Very interesting procedures.

Up until 8:15, no CNC involved. Nice lathe work, though. Thanks for letting us hear the machines with no annoying music.

So very dangerous. These are highly skilled operators. Respect.

Нано технологии😁

Я всегда с ВОСХИЩЕНИЕМ смотрю на работу давильщика

Nice hearing protection!

- ТБ? - не, не слышал

The more attractive the video is, the more useful information the author has

That second one looks remarkably like a place I used to deliver sheet metal to in North London. They made big dished ends for tanks and vats. I'll be honest - it scared the shit out of me just going in there.

This is really satisfying to watch. I'd never go close to one though. Seen too many videos of people being sucks into them!

Nice job.

Hell of a strong guy. Beautiful teamwork.

Pink Floyds new speaker cones and horns for his Leslie speaker cab.

A workshop inside a brothel

That dude is a real man bad ass

This job very good

Super technical video

Satisfactory ☺️

And i think those are big light reflectors for like stadiums

The posters in back are pretty funny. That would never fly in our facility, too PC.

ils ont de beaux poster quand même :p

Несчастные случаи были? Будут)

how it looks good , you have very nice skill . my job is welder , thank you .

Maestro de maestros increíbles trabajos ¡felicidades!👍

Wow! Anyone who doesn't like this video does NOT understand what they are seeing. Impressive!

I like the posters

啊伯手藝美邁哦

Could you imagine what that guy would do if his daughters boyfriend had her home too late? "Come here boy, imma show you how we make'em squeal!"

Who knew Sting was so great at metal spinning

Belo trabalho, porém faltam equipamentos de segurança e proteção!

Good Work

o ser humano é incrível fala ai galera!

I get the same feeling as watching lave flow, Calming and relaxing...But if the master gets entangled with that wood we're gonna see a new form of a javelin toss. Still, Amazing to observe...Peace to all.

Super video wie immer und einen schönen Tag wünsche ich euch allen noch

Back in the good ole days, when real men knew how to turn a massive copper buttplug ...

I made a 30" x 9" boss from 1" multi ply for a mettle spinner mate some years ago to spin large aluminium bowls I think to be put together to bounce some sort of electric current around ?. they did it with 1" fozzy bronze tips in their wooden mandrel s Cheers Tippo..GB.

💥Great 💡 amazing perfect 👍

That seems like a good way to keep something in tolorance

Quá đỉnh... 👍

Um disco voador estra terrestre kkkk brincadeira parabéns

amazing ，cnc spinning is similar way

Вот как оказывается делают духовые инструменты и т.п. А я никогда не задумывался и ни разу не вилел так

INCRÍVEL.

Gods of metal working

long shirt short shorts. Top Job. Safety first :D

yup 1:14 to 3:54 mm love the back round i wander what books thy came out of lol ?

Perfect machine process factory

Shaping that huge disc is very hard work, I hope he's well paid for it. Does anyone know what the bowl shaped item is for, some explanation on these vids would be most helpful and what country each item was filmed.

votre travail est formidable svp peut on repousser un disque en inox inoxidable

fantastic!

he,s making the worlds largest Moon hubcaps.

THIS ART OF SPINNING SHOULD BE SHOWN MORE ( TRUE CRAFTSMEN SHOWS WHAT WE HAVE IN THE UK)

Это профи, такую болванку на оборотах вручную и руки на месте

really enjoyable