Piaggio NRG mc3 Strip Down

Рет қаралды 16,671

3 жыл бұрын

Today we strip all this panels off this piaggio scooter ready for repair.
If you would like to support my Channel, You can check out my Amazon Wish List and buy something for the channel.
www.amazon.co.uk/hz/wishlist/...
Stuff I use.
My filming equipment.
Huawei P30 Pro :amzn.to/2CImtyA
Rode Wireless Go Mic: amzn.to/3h8WP5n
Boya external microphone: amzn.to/3g3zZv9
Tools..
DeWalt Drill and Impact driver :amzn.to/3g51C71.
Wire stripper: amzn.to/3g6RUkK.
US Pro Driver Bit Set: Screwdriver Bits Torx / PZ / PH / Flat Hex Spline Extra long Security 50pc AT822
Music creditited to Kevin Macleod www.incompetech.com

Пікірлер: 156

@ProjectMan 3 жыл бұрын

I hope you enjoy this video and please comment.

@Cydro12 2 жыл бұрын

Hey, great video! i'm rebuilding one myself, from the frame up, to get it registered as a motorcycle, so i can legally throw a 70cc kit on it, and hit the roads (the netherlands). I took many pictures to ensure i'd be rebuilding it the right way, with all the wires sitting in the right spot, but my phone broke, so the pictures are gone. Your videos show me just what i need to know what i'm unsure about the cable routing. Cheers !!

@ProjectMan 2 жыл бұрын

Nice man glad the videos help you 🤙

@MrSicbone 3 жыл бұрын

Such a clever bloke! No one would see the frame but you’re going that extra mile!

@ProjectMan 3 жыл бұрын

Gotta be done right si 👌

@melike1984 3 жыл бұрын

Glad you got the spray paint that i sent you its just a thank you for your content you do , and glad that the paint will come in handy for you 😎

@ProjectMan 3 жыл бұрын

Really appreciate it mate thank you 👍🏻

@c849243 3 жыл бұрын

You do great work, and help loads of folks, Gary. You should be very proud !

@ProjectMan 3 жыл бұрын

Cheers Mark 👍🏻

@petefroud5308 3 жыл бұрын

Get it done Bert . Time for painting.

@ProjectMan 3 жыл бұрын

🐦🐦

@paulgascoyne1896 3 жыл бұрын

Gary enjoyed the video. Nice to see my girl getting the tlc she deserves. Never knew that nail was there!

@ProjectMan 3 жыл бұрын

Cheers Paul it won't be going back in 😂

@and_rew9768 6 ай бұрын

One of the best Italian's bike 🔝🏆🥇❤

@STTC 3 жыл бұрын

Great video Gary, this is going to be a total transformation,,,,look forward to seeing your videos

@ProjectMan 3 жыл бұрын

Cheers bud 👍🏻

@dandoesbits 3 жыл бұрын

Superb video mate. Only just found your channel and loving it so far! Keep up the good work 👍

@ProjectMan 3 жыл бұрын

Cheers Dan 👌

@valborchardt3596 3 жыл бұрын

Thanks Gary, looking much cleaner now. Look forward to the next one.....take care

@ProjectMan 3 жыл бұрын

Thanks 👍🏻

@sdone7672 3 жыл бұрын

Great content Gary!! will look nice when finished.👍

@ProjectMan 3 жыл бұрын

Cheers bud 👍🏻

@martincunnington2154 3 жыл бұрын

Loving the content on the channel gary

@ProjectMan 3 жыл бұрын

Cheers bud 👍🏻

@andy_v4443 3 жыл бұрын

excellent more bikes lol, BIG THUMBS UP GARY LAD

@ProjectMan 3 жыл бұрын

🤣👌

@silverghost8143 3 жыл бұрын

Thanks for another interesting and informative video. Keep them coming. Take care gary snd family. Stay safe

@ProjectMan 3 жыл бұрын

Cheers bud 👍🏻

@graydoncoleman5921 3 жыл бұрын

Keep it up mate, enjoying the content 👍

@ProjectMan 3 жыл бұрын

Cheers bud

@AliMackMechanical 3 жыл бұрын

Tina bought me some of the micro fibre cloths there handy. Nice job Gary nice and clean mate.👍

@ProjectMan 3 жыл бұрын

Cheers Ali 👍🏻

@alandykes2519 3 жыл бұрын

That looks really nice and clean now gary that g101 is amazing stuff i use it for everything even upholstery its like a magnet to muck i sware by it i believe i mentioned it to you when you first started out doing videos keep up the good work mate 👍👍👍👍

@ProjectMan 3 жыл бұрын

Cheers alan it's great stuff 👍🏻

@andrewwoodward6560 3 жыл бұрын

Nice work Gary ! You're so lucky to work outside, it snowed here today. :( Take care !

@ProjectMan 3 жыл бұрын

Cheers 👍🏻

@robertbowes1001 3 жыл бұрын

That bike in its stripped down state looks like most of the bikes riding round my estate

@ProjectMan 3 жыл бұрын

😂😂

@JimJimpmjj 3 жыл бұрын

Brilliant well done ✅👍

@ProjectMan 3 жыл бұрын

👍🏻👍🏻

@tinkeringtaylor3053 3 жыл бұрын

good video work Garry and that cleaner makes a good job

@ProjectMan 3 жыл бұрын

Cheers bud 👍🏻

@martinburgess4814 3 жыл бұрын

Nice to see someone busy, good video as always, go on tune it up,make it quicker

@ProjectMan 3 жыл бұрын

It's just a flip bike mate 👍🏻

@JPWest020 2 жыл бұрын

I recently stripped a Piaggio New Fly. To get the front fairing off you need to start at the rear light. It’s all covered in a way you will not be able to get to the screws otherwise.

@leeroberts5496 3 жыл бұрын

Looks a different bike already, keep up the good work.

@ProjectMan 3 жыл бұрын

Cheers Lee 👍🏻

@paulmckinder3082 3 жыл бұрын

Thats going to be a great little bike that

@ProjectMan 3 жыл бұрын

Cheers bud 👍🏻

@alessandropezzella855 3 жыл бұрын

Wow 🤩

@ianleatherland7811 3 жыл бұрын

Loving the content Gary I sent you the mallet ,microfibres and cutting paste hope they come in useful keep up the hard work mate👍

@ProjectMan 3 жыл бұрын

Cheers Ian really appreciate it mate 👍🏻

@a11csc 3 жыл бұрын

nice content gary

@ProjectMan 3 жыл бұрын

Cheers bud 👍🏻

@paulwood7798 3 жыл бұрын

Nice one Gary

@ProjectMan 3 жыл бұрын

Cheers bud

@s-s-p704 3 жыл бұрын

I like the scooter when you only see the frame

@ProjectMan 3 жыл бұрын

Looks totally different nothing to them really 👍🏻

@georgebondchatshow54 3 жыл бұрын

Nice Gary keep it up

@ProjectMan 3 жыл бұрын

Cheers George, 🐦

@georgebondchatshow54 3 жыл бұрын

If I needed you have to text you on here because I've been texting you on messenger and you haven't been replying Gary

@andyjrichie6709 3 жыл бұрын

Great video Gary , nice and easy project , I have a sym jet 4 50cc cheap little scooter to mess with

@ProjectMan 3 жыл бұрын

👌👌

@paulbudford 3 жыл бұрын

So much nicer working on a clean bike. 👍

@ProjectMan 3 жыл бұрын

It is bud 👍🏻

@danilodalessandro2423 2 жыл бұрын

Thank you for this video

@ProjectMan 2 жыл бұрын

Cheers 👍🏻

@danilodalessandro2423 2 жыл бұрын

@@ProjectMan by chance you also have a video where you show how to disassemble the engine block? I need to clean the carburetor and the filter, it is an old ngr power of mine that has been stopped for some time and I would like to put it back on track

@ProjectMan 2 жыл бұрын

No sorry not had the engine apart on this one only a service.

@danilodalessandro2423 2 жыл бұрын

@@ProjectMan okay thank you same 🙏

@simonallchin7600 8 ай бұрын

Just bought an NRG - a bit scruffy so very interested to see the strip down and tidy up. Always dubious about power washing all the electrical components though

@alessandropezzella855 3 жыл бұрын

Wow

@madmattsbucketlist385 3 жыл бұрын

Hi Gary, fascinating video. You know I don't know very much about engines and the like. That's why I watch your channel and Ali's. There's nothing to the scooter as you said. I was amazed. I got this Piaggio scooter mixed up with that famous Italian scooter. If you or any of your viewers can remember the name of the Italian one I'd be grateful. It's driving me nuts that I can't remember. You'll be impressed, I even watched EVERY advert!!! How impressed are you? Hope you and all your family are well. Stay safe buddy. Matt.

@ProjectMan 3 жыл бұрын

Cheers matt appreciate it mate 👍🏻

@thecaptain5990 3 жыл бұрын

Piaggio Vespa?

@SJHughes 3 жыл бұрын

Gilera runner ?

@SJHughes 3 жыл бұрын

Lambretta

@madmattsbucketlist385 3 жыл бұрын

@@SJHughes That's it Lambretta!!! You've mad me a very happy man now. Thanks Steve. Much appreciated. Stay safe. Matt.

@mbk201220 3 жыл бұрын

The liquid cooled ones can be fast aff not so much the air cooled but good little bikes and good thing about em are typhoon front panel fits perfect

@ProjectMan 3 жыл бұрын

Great little bikes 👌

@shanebrookes1878 3 жыл бұрын

Gary what ya wanting for piaggio when running ya got a rough estimate!! Cheers fella loving videos

@ProjectMan 3 жыл бұрын

Not a clue till its done bud 👍🏻

@shanebrookes1878 3 жыл бұрын

@@ProjectMan give us a shout!! Cheers mukka

@scottwilliams1215 3 жыл бұрын

Hi Gary, my mate used to have a 50cc Thomas dont kno if you know them and i had a 50cc Honda XR8 i think it was many years ago now. Great fun. I bought my son a Yamaha PW50 shaft driven 2nd hand for £70 did it up and sold it for £300. Didnt need much doing either. Hot stuff them PW50s

@ProjectMan 3 жыл бұрын

Nice little bikes 👍🏻

@c4lcffc743 2 жыл бұрын

Can you show us how to remove the ingition and replace it?

@LoveLife-ee9rm Жыл бұрын

Hi there I've got mc2 nrg and I can remember where the fuel pipes go on the carb and the 2 stroke pipe goes I should of of took a picture so it be easier lol 😆

@keeaan6895 11 ай бұрын

How did you get the mirrors off? Do they just twist off? Or Did you have to take the front steering panel off first?

@ProjectMan 10 ай бұрын

They twist off.

@keeaan6895 10 ай бұрын

@@ProjectMan mine must be rusted on, they won’t budge 😅 do you twist then left or right to loosen?

@ProjectMan 10 ай бұрын

Left mine to loosen.

@jacobgiannini5646 2 жыл бұрын

I got the same bike, haven’t been running for 14 years but would like to get it running again. Bought a new batter and Tried to start it and get it running but it cuts out after releasing throttle ideas on what could be the issue?

@ProjectMan 2 жыл бұрын

I would say you need to have the carburettor off and give it a good clean

@barryjones6214 3 жыл бұрын

Good job Garry have a look at the bilt hamber range there surfex hd is as good if not better than g101 and cheaper but they also do a range of rust removal and rust prevention products keep the the vids coming

@ProjectMan 3 жыл бұрын

Cheers Barry 👍🏻

@davedavidson6872 Күн бұрын

Whats up? Hope everyone doing well. I‘m searching for the flasher relais. Van someone Tell were i can find it?

@hz1234 2 жыл бұрын

I need a plastic wrap. How much is it?

@garywright5939 3 жыл бұрын

Could u do a video on getting the extra speed from the engine u talk about in vid Gary🙏

@ProjectMan 3 жыл бұрын

Cheers Gary but I'm not tuning this one 👍🏻

@normsmowers4758 3 жыл бұрын

Our you keeping the panels same colour mate 👍

@ProjectMan 3 жыл бұрын

Yer Il keep it blue saves doing colour changes on logbook

@popescuvalentin5691 3 жыл бұрын

hey mate, i got a nrg mc1 and i can't find the vin number on it, where is it located

@ProjectMan 3 жыл бұрын

Under the foot plastic

@nigelstevens3627 3 жыл бұрын

you need a versi tray for all those screws......

@ProjectMan 3 жыл бұрын

🤣🤣

@Amar-ng6cc Жыл бұрын

I have the same scooter, light, blinkers and everything stopped working. Still starts on kickstart. If somebody knows what it might be i'd be very thankfull.

@ProjectMan Жыл бұрын

Have you tryed fuse?

@rambop8925 3 жыл бұрын

👍🤔👍👍👍

@annabellecarter6067 3 жыл бұрын

You like the word "so"

@danishscooterdesigns5426 3 жыл бұрын

speed-line.com/piaggio-nrg-mc3-ac/plastic-parts You can find the side vents right here if you like :) Cheers

@ProjectMan 3 жыл бұрын

Thank you just ordered 👌

@danishscooterdesigns5426 3 жыл бұрын

@@ProjectMan Haha, man did you order at the right shop @ the perfect time :) I just put a little something something together for you :) Package is on the way in an hour or so (y) Thanks for your order ;)

@ProjectMan 3 жыл бұрын

Much appreciate your help thank you is speedline part of you?

@danishscooterdesigns5426 3 жыл бұрын

@@ProjectMan More like the other way round :) I work at Speedline, but made this chanel some years back, just for fun. We made the BWS project my brother and I (He also works at Speedline) :) so yeah. one big happy familiy :D

@ProjectMan 3 жыл бұрын

@@danishscooterdesigns5426 cool I know where to look for scooter parts now 👍🏻

@garyclifton2180 Жыл бұрын

Gary my son just got his son one of these full mot saying every thing works he's got it home it will start with kick start but nothing else works no lights leccy Star nothing he said he can only find one 10 amp fuse have you any idea I think there must be more than one fuse

@ProjectMan Жыл бұрын

I believe there is only the one fuse next to the battery iv seen this before and it was a junk battery what's the state of the battery?

@garyclifton2180 Жыл бұрын

@@ProjectMan he's put it in chart says he thinks it's ok mate like I say it's come with a full mot but when they looked at it the lad selling used the kick start my son is a dick just TUC lads word for it so you think maybe battery

@ProjectMan Жыл бұрын

Will the lights come on when it's running?

@garyclifton2180 Жыл бұрын

@@ProjectMan no Gaz nothing works mate ud think with it passing not it should be fine I don't think they work with it running but IV told her to put it on charge all night I'll test it tomorrow put it on bike see if it starts I can't see all bulbs blowing wandering if it could be a earth problem not sure mate

@ProjectMan Жыл бұрын

@@garyclifton2180 I was gonna say next could be a bad Earth but the front and rear lights should work without a battery that's why I asked if they work when running so that should eliminate the battery being shot.

@dubzuk3710 3 жыл бұрын

Hey mate I've spotted some vents on ebay for ur moped and they are £29 but not in colour

@ProjectMan 3 жыл бұрын

Cheers do you have a link?

@ProjectMan 3 жыл бұрын

Can't see the link bud an you post the item number?

@dubzuk3710 3 жыл бұрын

@@ProjectMan 174465430822 Thats the item number bud

@ProjectMan 3 жыл бұрын

Cheers bud it's the side ones I need like this 5753380043 👍🏻

@dubzuk3710 3 жыл бұрын

@@ProjectMan oh its ones that look like those,ah ok mate

@AndrewSandilands-tk6st 3 жыл бұрын

50/50....so....half and half then 🤣

@landmonkey22 3 жыл бұрын

Its a mc2

@andrisak4795 10 ай бұрын

just bought one, bogs high rpm ;/

@ProjectMan 10 ай бұрын

Carb

@andrisak4795 10 ай бұрын

cleaned the carb,fresh spark plug,and it still bog s down it only has power to move for 2-3 seconds when first started then bogs down even when revved,i think its eletrical beacuse my turn signals ,fuel and temp guage do not work ,and im thinking its a wiring issue@@ProjectMan

@ProjectMan 10 ай бұрын

@@andrisak4795 bogging down won't be nothing to do with your dash board gauge not working either your Carb needs setting up or replacing or the petrol is getting restricted look under the petrol tank you should see a silver disk with fuel pipe coming off it sometimes that disk needs replacing as it has a diaphragmin it and it can fail

@andrisak4795 10 ай бұрын

@@ProjectMan okay thank you i will have a look, but when i was dissasembling the carburetor from the fuel line ive noticed a pretty weak dribble coming from fuel line.thANKS.

@ProjectMan 10 ай бұрын

As I say check that disk I had the same problem 👍🏻