Piaggio Scooter Drive belt and roller replacement (leader engine) Catastrophic belt failure part 2

Рет қаралды 17,637

bikerdood1100

Жыл бұрын

In the second part of our Piaggio belt failure film we replace the belt and put some new rollers into the variator

Пікірлер: 24

@hazy1418 11 ай бұрын

Thank you very much for loading this video, good clear instructions although does need 2 to push that clutch back to get the new belt in!

@bikerdood1100 11 ай бұрын

It can do if you don’t have the grip of a gorilla 😂

@mrmoon1482 Жыл бұрын

TT belts don’t handle heat very well, they stretch and seam to not cool properly then start to slip, I got one for my Yamaha scooter because it was cheaper than original, I then went on a 350 mile trip with motorway miles included, I managed to get home but changed it for original right away, Did the same trip again with no problems,

@bikerdood1100 Жыл бұрын

On the bright side I’m in the Uk so heat ain’t often a problem. Interesting though

@user-qo6ko2ty9k 10 ай бұрын

Hello, Thank you very much for this very educational video. Question: since my belt broke, then replaced, my Piaggio MP3 300 (2011) has a lot of trouble starting. When it starts, it works fine, but I can stall at idle and come in pushing! Do you have any ideas?

@bikerdood1100 10 ай бұрын

Well if it’s fuel injected possibly a sensor If carb I’d look at the auto choke

@xevo2508 6 ай бұрын

Ich habe den Xevo 250ie und hatte dieses Problem auch. Der Übeltäter war der Zündstecker und die Zündkerze. Die Zündkerze habe ich gegen eine NGK Iridium ersetzt und den Stecker gegen einen passenden, da muss man auf den Winkel achten. Gab es alles bei Louis. Seither über 40.000km gefahren ohne Probleme.

@oo9467 Жыл бұрын

Hello firstly thanks for the video I have a question if you could help I have a peugeot satelis 500cc and replaced my belt yesterday with a new belt my problem is now I have changed the belt the spedo takes time to show the speed iam travelling with new belt on but when I put the old belt back on the spedo works showing the speed iam travelling this is puzzling me I was wondering if this is normal because its a new belt and as to wear in the new belt is for my bike so I can rule out wrong belt and the sedo works from front wheel rotation so I can rule back wheel spedo drive thanks hope I haven't bothered you but allso hope you can help

@bikerdood1100 Жыл бұрын

How unusual. Changing the belt may affect engine speed so the rev counter. The speedometer usual picks up from a sensor on the front wheel so shouldn’t be effected

@oo9467 Жыл бұрын

@bikerdood1100 can't understand it my self like I said old belt back on it shows walking speed of 5 miles a hour put new belt back on it does not show any thing until just over 10 miles a hour

@winniepeg2020 3 ай бұрын

Brilliant video thanks 😎 I have the 2007 model Is there a fuel filter 🤔

@bikerdood1100 3 ай бұрын

Oh We don’t have it any more But I think it does

@couwoud 2 ай бұрын

Hi ! Thanks for the tuto. Could you please tell me where the ground wire we see on the left of the transmission goes ? I don’t have this on my 2004 x8… thanks

@bikerdood1100 2 ай бұрын

Think it simply earths the engine to the frame Maybe they moved it for ease of access

@couwoud 2 ай бұрын

@@bikerdood1100 thanks 🙏🏼

@user-bo1zq6db8r 9 ай бұрын

Thanks for the vid. I have a piaggio xevo it's just started to make a dragging of feet sort of noise with loss of power. Any ideas on what it could be.

@bikerdood1100 9 ай бұрын

Most likely badly worn rollers and probably belt too But the rollers can get noisy

@JosephTucker-t4g Ай бұрын

Like you're worth making you do my better.

@bikerdood1100 Ай бұрын

What ?

@dokesz530 4 ай бұрын

Buy malossi never snap.They kevlar belts are strong but a little shorter then stock.Hold rpm stable.

@bikerdood1100 4 ай бұрын

Yes they do Trust I know that they can They do have a longer life but the bearing surface can still break up just the same Everything wears out eventually 😂

@dokesz530 4 ай бұрын

@@bikerdood1100 ofcourse thats why need to check them but i never had a belt snap.I replace it before the engine start to lose performance.

@bikerdood1100 4 ай бұрын

Well in fairness I would have left it unchanged but someone decided to take it to Holland at the last minute 🙄 I did say I can’t guarantee the belt but you know how teens are 😂😂