No video
Pinning a Porsche 996 Turbo | Tear Down & Installation
Рет қаралды 3,838
6 ай бұрынOur client Steve brought in his Porsche 996 Turbo track car for Brandon to "pin" the coolant lines. This is the same Porsche that Brandon did one of the coolant lines with the recommended JB Weld fix but now our client wants to be sure that the rest of the coolant hoses are pinned so chances of a failure will be slim. This is a time consuming procedure so Brandon takes his to be sure he gets it Right!
SUPPORT OUR CHANNEL: T-shirts and hats available at www.uwrenchaz.com/merchandise
@seanmartinez6981 6 ай бұрын
I have done this exact job but the owner opted to have them all welded. BBI welds them and pressure tests. It is also a great time to clean/service the injectors and replace all those coolant lines since they are 20 years old now. While the engine is out, replace the coolant tank. Filling the coolant requires a vacuum filler since there are so many places for air to hide.
@brandonwelsh2743 6 ай бұрын
We’ve got the coolant vacuum and ordered the coolant lines and other things. The coolant tank actually looks newer so that’s a plus. BBI uses new parts so that makes welding it much easier.
@iainmcglynn833 6 ай бұрын
Some very understated skilled work going on here I’ve seen the result when these blow off and you can toast your engine so money well spent Excellent video 🏴😎
@harlanpepper 5 ай бұрын
Some track days require you have them pinned or welded - losing traction and hitting the wall or someone else is probably the biggest risk vs. engine damage. When mine went, I just dumped my coolant on the freeway and got a low coolant warning before realizing what happened. They're welded now!
@knickebien1966 6 ай бұрын
I dig the funky music man!
@user-ib6fu3ux1q 6 ай бұрын
Very well presented video. Thank you for the detail.
@garyworokevich2524 6 ай бұрын
Track day......the funnest thing you can do with your clothes on.🤣
@ejtakach 6 ай бұрын
OMG, looks expensive!
@michaelbloom5342 18 күн бұрын
I assure you that a new engine costs far, far more than this did.
@mjcavender1230 6 ай бұрын
Nice work! 👍👍
@esiebert7625 6 ай бұрын
Man what a tight confined space to work in, I hate working in tight spaces. Kudos for doing that job, how many hours total did it end up taking?
@brandonwelsh2743 6 ай бұрын
About 10-12 hours. I actually enjoy working on these haha.
@dalestofer4301 6 ай бұрын
Is this a design error or a design on purpose? So just not designed for the track? Built just enough to drive. Worked in parts for a Porsche dealer back in the early 80s. Things were much simpler, like drop the engine to adjust the valves.
@brandonwelsh2743 6 ай бұрын
I think it was an error because of it not being considered in testing. However it does happen on older ones that have been through lots of heat cycles. It wasn’t an issue for 5-6 years after they were first introduced.
@MS-hd8yq 6 ай бұрын
Great job Brandon. If you weren't filming, how long would the entire process take you?
@brandonwelsh2743 6 ай бұрын
It would be about 10 hours or so.
@MS-hd8yq 6 ай бұрын
@@brandonwelsh2743 thank you. That's not too bad considering how much you have to do. Probably double that, at least, for a non pro
@brandonwelsh2743 6 ай бұрын
@@MS-hd8yq yeah, book time is 14.3 hours to just pull and replace the engine.
@stacyrodgers4051 4 ай бұрын
🔥 *promo sm*
@rafyg 6 ай бұрын
That happened to me and I have never tracked the car.
@brandonwelsh2743 6 ай бұрын
You must have been doing a lot of illegal stuff on the street then lol
@ATGEnki 6 ай бұрын
Man there is no room back there. Where are you supposed to put your groceries?
@brandonwelsh2743 6 ай бұрын
In the Frunk haha
U-Wrench TV
Рет қаралды 1,8 М.
U-Wrench TV
Рет қаралды 6 М.
Protomotive Inc.
Рет қаралды 1,4 М.
Regal Autosport
Рет қаралды 6 М.
Nathans Porsche Workshop
Рет қаралды 29 М.